RF exposure

FCC ID: FSUGMZLV

RF Exposure Info

Download: PDF
FCCID_4485508

FCC ID : FSUGMZLY RF EXPOSURE EVALUATION METHOD SAR Test Exclusion Thresholds for 100 MHz ~ 6 GHz and < 50 mm Approximate SAR Test Exclusion Power Threstolds at Selected Frequencies and Test Separation Distances are illustrated in the fol lowing Table. wte s 10 is 20 2s mm 150 5 m us 153 194 300 27 ss a uo 137 450 22 a5 67 so u2 a3s i6 3 40 se 2 Em G 5 a7 C 7o 1500 12 x 57 19 s SAR Test Exclusion 1900 U 2 3. 41 5t Threshold(raW) 2450 to 19 Eo 3 as 3600 s 16 2 5 30 5200 7 i6 20 26 3 5400 s i6 19 26 5 seoo 6 12 19 as a _| The 1—g and 10— SAR test exclusion thrasholds for 100 MHz to 6 GHz at test separation distances < 50 mm are determined by: [{max. power of channel, including tune—up tolerance, mW)/(min. test separation distance, mm}] + [/f(GHe)] < 3.0 for 1—g SAR and < 7.5 for 10—4 extremity SAR.where 1(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is < 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion

FCC ID : FSUGMZLV Maximum measured transmitter power. BLE4.0 The Worst Case Mode 2405~2475MHz Detector PEAK GFSK -8±1dBm Remark: The worst case gain of the antenna is 0dBi. 3.192dBi logarithmic terms convert to numeric result is nearly 0 Maximum Peak Tune up frequency Conducted Tune up Limit Mode Power Result (GHz) Output Power Power(dBm) (mW) (dBm) GFSK 2.405 -8.35 -7 0.19952623 0.0619 3 Threshold at which no SAR required is 0.0619≤ 3.0 for 1-g SAR, Separation distance is 5mm.


Document Created: 2019-10-14 03:27:33
Document Modified: 2019-10-14 03:27:33
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC