User Manual.pdf

FCC ID: FSUGMZL1

Users Manual

Download: PDF
FCCID_2169739

 Quick Star Guide
2.4GHz Blue LED Wireless Optical Mouse W30




Model: PA5155* (Where * is 0-9, A-Z, - or blank for marketing purpose)


     Important Safety Instructions
     To protect against risk of fire, bodily injury, electric shock or damage to the equipment:
     ■ Do not immerse any part of this product in water or other liquid.
     ■ Do not spray liquid on this product or allow excess liquid to drip   inside.
     ■ Do not use this product if it has sustained any type of damage.
     ■ Disconnect this product before cleaning.

    This guide is copyrighted by Toshiba Corporation with all rights reserved. Under the copyright laws, this
    guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent
    liability is assumed, however, with respect to the use of the information contained herein.
    ©2013 by Toshiba Corporation. All rights reserved.
Disclaimer
Information in this document is subject to change without notice. The manufacturer does not make any
representations or warranties (implied or otherwise) regarding the accuracy and completeness of this document
and shall in no event be liable for any loss of profit or any commercial damage, including but not limited to
      special, incidental, consequential, or other damage.
     July 2013, Rev1.0
     Trademarks
     Microsoft, Windows and Windows vista are either registered trademarks or trademarks of
     Microsoft Corporation in the United States and/or other countries.
     Other trademarks or brand names mentioned herein are trademarks or registered trademarks of
     their respective companies.
     Introduction
     Thank you for purchasing the Toshiba Wireless Optical Mouse W30.
     Check to make sure you have all of the following items:
     ■ Quick Start Guide (this document) and a Warranty Leaflet
■ Toshiba Wireless Optical Mouse W30 with Nano receiver
■ One AA batteries


                                        Toshiba Wireless Optical Mouse W30


Quick Tour
 The following figures show the components of the top and underside of the mouse.




                             DO NOT direct the optical sensor light at anyone's eyes.

System Requirements
             ®          ®                     ®           ®             ®
■ Microsoft Windows XP,       Windows Vista , Windows 7 , Windows 8
■ Mac OS 10.x or above
■ USB port


Setting up the Mouse Installing the Batteries
1.   Open the battery cover.
2.   Remove the Nano receiver from the mouse.
3.   Insert the batteries into the battery compartment as shown.
4.   Replace the battery cover.


                                                          Toshiba Wireless Optical Mouse W30

                  Establishing a Connection between the Mouse and the Computer
                  1     Plug the Nano receiver into an available USB port on your computer.
                  2     Slide the Power switch upward to the ON position.
                  3     The battery indicator light on the top of the mouse will glow red for approximately three
                        seconds. When the light turns off, the mouse is ready for use.




                       NOTE
                       The mouse will enter sleep mode after a period of time to conserve power. Move the mouse or click the
                       button to wake it up.

                  Low Battery Warning
                  Replace batteries when the battery indicator light flashes red for five seconds.
                  Troubleshooting
Problem Solution(s)
                  Mouse does not work make sure you have installed the mouse correctly.
                  Make sure the Nano receiver is plugged into an available USB port on your computer. Make sure the
                  mouse has been detected properly by the operating system. Refer to your computer documentation for
                  the correct port configuration. Connection failed. Disconnect the Nano receiver from the USB port on
                  your computer, and then re-connect it. If the mouse does not work after ten seconds, press the Connect
                  button on the bottom of the mouse to pair the mouse and the computer.
                  1.   Do not use the wireless optical mouse on a desk which is made of clear glass or mirror.
                  2.   If you feel the mouse does not move smooth as usual, it is possible the batteries have lost their
                       charge so you need to replace them. Remember to put the batteries in the correct direction.
                  3.   The connection of the wireless device is factory preset, so when you plug the USB receiver into any
                       USB port, the connection between the micro receiver and the mouse will be established
                       automatically.
                  4.   In case your laptop or PC did not install the hardware successfully, remove the micro receiver from
                       the USB port and go Human Interface Devices under Device Manager to remove the mouse then
                       plug in the micro receiver to a USB port again.


       Tast




                                                                                                          Toshiba Wireless Optical Mouse W30


Specification*
Item                               Description
Model number                       wW30
Buttons                            Left, Right, Scroll wheel
Interface                          USB
Power requirements                 Operating: 1.5V/35 mA
                                   Stand—by: 1.5V/1.29 mA
                                   Sleeping: 1.5V/0.45 mA
Dimensions (D x W x H)             98.10 x 58.06 x 28.00 mm
Weight                               g
Wave length                        465~470 nm
Velocity                           30 inches/sec
Acceleration                        10 g
Optical sensor                     3200 times/sec
Resolution                          1600 DPI
Frequency band                     2.4 GHz (2.402~2.480 GHz)
RF power                           2 dBm
RF distance                        6 m (open space 10 m)
Operating humidity                  10%~90% (55 + 2°C)                                                                                                                                              _@9_
Operating temperature              0~40°C (32~104°F)
Storage temperature                —20~60°C (—4~140°F)
*Specifications are subject to change without further notice.
FCC Caution
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:

   Reorient or relocate the receiving antenna.
   Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that
    to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,
and(2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate this equipment.



Safety Caution:


                   CAUTION
  RISK OF EXPLOSION IF BATTERY IS REPLACED
            BY AN INCORRECT TYPE.
    DISPOSE OF USED BATTERIES ACCORDING
                   TO THE INSTRUCTIONS



EBm Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or
contact the retailer where the product was purchased. They can take this product for environmental safe recycling.


                                                      Complies with IDA Standards DA101747



Document Created: 2014-01-09 14:11:08
Document Modified: 2014-01-09 14:11:08

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC