User Manual

FCC ID: FSUGMZKY

Users Manual

Download: PDF
FCCID_2076162

KYE SYSTEMS CORP. English Hardware Installation For Mouse use: Energy Mouse Model:GM-120031/S 1. Connect the receiver to a USB port of a PC. 2. Make sure that you have switched on the power switch underneath the mouse. For Mouse with power bank function charging: 1. How to start charge Energy Mouse a. Plug the Micro USB cable into the Energy Mouse Micro USB port, and then insert the other end of the cable into USB port of your power supply (e.g. wall charger, or computer USB port). The power level LED indicators will be flashing in sequence. b. When the charge is completed, the four LEDs will stay on for 10 minutes, and then turn off for power saving. 2. How to start charging mobile devices a. Connect your device to the Energy Mouse USB output port. b. Press and hold the button for two seconds to turn it on. The power level LED indicators will flash three times and the charging will start. c. To stop charging, press the button for two seconds again. Or just disconnect the cable; Energy Mouse will automatically turn off in 30 seconds. 3. How to check power capacity of Energy Mouse a. Press and hold button for two seconds for the power level. The four LEDs will flash three times first then show the power capacity. 4. How to turn off Energy Mouse when charging is finished a. Just remove the charger cable. Energy Mouse will automatically turn off automatic off in 30 seconds. Mouse Button Assignments 1. Left Button: Provides traditional mouse functions like click, 1

KYE SYSTEMS CORP. English double click and drag. 2. Magic-Roller: Press the “Magic-Roller” to surf the Internet and Windows documents. 3. Right Button: Provides traditional mouse click functions. 4. Button: Press and hold this button for two seconds to turn it on. The power level LED indicators will flash three times and the display battery’s capacity. 5. Power Level LED indicators: When the charge is completed, the four LEDs will stay on for 10 minutes, and then turn off for power saving. LED ●●●● ●●●○ ●●○○ ⊙○○○ Indicators Blinking Power Level 100-75% 75-50% 50-25% 25-5% ● LED On ○ LED Off ⊙ LED Blinking Remark: Power level low indication If the LED is flashing five times, then the power level is low, and you need to recharge the mouse immediately. Note: Download the programmable driver from our website: www.geniusnet.com Warning: (Troubleshooting) 1. Make sure the Energy Mouse is completely charged before first usage. 2. Use the standard cable or it could cause damage to Energy Mouse. 3. Confirm the voltage of the mobile device is 5V before you use Energy Mouse to charge it. 4. To maintain the life span and quality of Energy Mouse battery, we recommend you unplug the power cable promptly after Energy Mouse is fully charged and fully charge it every four months. 5. Do not drop, knock, disassemble or attempt to repair Energy Mouse by yourself or you will void the warranty. If there is any problem, you can contact a service center for assistance. 6. Do not leave Energy Mouse in a vehicle, expose it to sunlight or put it near any heat source for a long time as strong light and high temperature will lead to battery damage. 7. Store Energy Mouse in a cool, dry place, and keep it away from fire and moisture. 8. Do not put any object (except the USB cable) into any of the Energy Mouse micro USB input or USB output ports to avoid short circuit damage. 9. Keep Energy Mouse away from children and pets. Do not use the wireless optical/laser mouse on a desk which is made of glass or mirror. 10. The connection of the wireless device is factory preset, so when you plug the USB receiver into any USB port, the connection between the micro receiver and the mouse will be established automatically. 11. In case your PC did not install the hardware successfully, remove the micro receiver from the USB port and go Human Interface Devices under Device 2

KYE SYSTEMS CORP. English Manager to remove the mouse, then plug in the micro receiver to a USB port again. 12. Energy Mouse can be use as a wire Mouse connect to PC directly. FCC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 3

KYE SYSTEMS CORP. English - Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. 13. Safety Caution: 4

KYE SYSTEMS CORP. English Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling. 5


Document Created: 2013-09-03 17:34:01
Document Modified: 2013-09-03 17:34:01
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC