Test Report

FCC ID: FSUGMZKI

Test Report

Download: PDF
FCCID_1861214

Compliance Certification Services Inc. FCC ID: FSUGMZKI Report No.: T121029D04-RP1 FCC 47 CFR PART 15 SUBPART C TEST REPORT For PenSketch T609A Model: GT-120002 Trade Name: Genius Issued to KYE SYSTEMS CORP. No.492, Chongxin Rd., Sanchong Dist., New Taipei City, 24160, Taiwan, (R.O.C.) Issued by Compliance Certification Services Inc. No.11, Wugong 6th Rd., Wugu Dist., New Taipei City 24891, Taiwan. (R.O.C.) http://www.ccsrf.com service@ccsrf.com Issued Date: December 10, 2012 Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. Page 1 / 23 Rev.00

Compliance Certification Services Inc. FCC ID: FSUGMZKI Report No.: T121029D04-RP1 Revision History Issue Effect Rev. Date Revisions Page Revised By 00 December 10, 2012 Initial Issue ALL Eunice Shen Page 2 Rev.00

Compliance Certification Services Inc. FCC ID: FSUGMZKI Report No.: T121029D04-RP1 TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION............................................................................................. 4 2 EUT DESCRIPTION .................................................................................................................... 5 3 TEST METHODOLOGY ............................................................................................................. 6 3.1. EUT CONFIGURATION....................................................................................................... 6 3.2. EUT EXERCISE .................................................................................................................... 6 3.3. GENERAL TEST PROCEDURES........................................................................................ 6 3.4. FCC PART 15.205 RESTRICTED BANDS OF OPERATIONS.......................................... 7 3.5. DESCRIPTION OF TEST MODES ...................................................................................... 7 4 INSTRUMENT CALIBRATION................................................................................................. 8 4.1. MEASURING INSTRUMENT CALIBRATION.................................................................. 8 4.2. MEASUREMENT EQUIPMENT USED .............................................................................. 8 4.3. MEASUREMENT UNCERTAINTY .................................................................................... 9 5 FACILITIES AND ACCREDITATIONS ................................................................................. 10 5.1. FACILITIES......................................................................................................................... 10 5.2. EQUIPMENT....................................................................................................................... 10 5.3. TABLE OF ACCREDITATIONS AND LISTINGS ........................................................... 11 6 SETUP OF EQUIPMENT UNDER TEST ................................................................................ 12 6.1. SETUP CONFIGURATION OF EUT ................................................................................. 12 6.2. SUPPORT EQUIPMENT .................................................................................................... 12 7 FCC PART 15.209 REQUIREMENTS...................................................................................... 13 7.1. RADIATED EMISSIONS ................................................................................................... 13 7.2. POWERLINE CONDUCTED EMISSIONS ....................................................................... 18 APPENDIX I PHOTOGRAPHS OF TEST SETUP ....................................................................... 21 Page 3 Rev.00

Compliance Certification Services Inc. FCC ID: FSUGMZKI Report No.: T121029D04-RP1 1 TEST RESULT CERTIFICATION Applicant: KYE SYSTEMS CORP. No.492, Chongxin Rd., Sanchong Dist., New Taipei City, 24160, Taiwan, (R.O.C.) Equipment Under Test: PenSketch T609A Trade Name: Genius Model: GT-120002 Date of Test: December 3 ~ 7, 2012 APPLICABLE STANDARDS STANDARD TEST RESULT FCC 47 CFR Part 15 Subpart C No non-compliance noted We hereby certify that: The above equipment was tested by Compliance Certification Services Inc. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4: 2009 and the energy emitted by the sample tested as described in this report is in compliance with the requirements of FCC Rules Part 15.207, 15.209. The test results of this report relate only to the tested sample identified in this report. Approved by: Reviewed by: Miller Lee Gina Lo Section Manager Section Manager Compliance Certification Services Inc. Compliance Certification Services Inc. Page 4 Rev.00

Compliance Certification Services Inc. FCC ID: FSUGMZKI Report No.: T121029D04-RP1 2 EUT DESCRIPTION Product PenSketch T609A Trade Name Genius Model Number GT-120002 Model Discrepancy N/A Received Date October 29, 2012 Power Supply Powered from host device via USB Cable. Frequency Range 960kHz +/- 10kHz Antenna Specification Loop Antenna Remark: 1. The sample selected for test was engineering sample that approximated to production product and was provided by manufacturer. 2. This submittal(s) (test report) is intended for FCC ID: FSUGMZKI filing to comply with Section 15.209 of the FCC Part 15, Subpart C Rules. Page 5 Rev.00

Compliance Certification Services Inc. FCC ID: FSUGMZKI Report No.: T121029D04-RP1 3 TEST METHODOLOGY The tests documented in this report were performed in accordance with ANSI C63.4 (2003) and FCC CFR 47 Part 2, 15.207, 15.209. 3.1. EUT CONFIGURATION The EUT configuration for testing is installed on RF field strength measurement to meet the Commissions requirement and operating in a manner that intends to maximize its emission characteristics in a continuous normal application. 3.2. EUT EXERCISE The EUT was operated in the engineering mode to fix the TX frequency that was for the purpose of the measurements. 3.3. GENERAL TEST PROCEDURES Conducted Emissions The EUT is placed on the turntable, which is 0.8 m above ground plane. According to the requirements in Section 13.1.4.1 of ANSI C63.4 (2003). Conducted emissions from the EUT measured in the frequency range between 0.15 MHz and 30MHz using CISPR Quasi-peak and average detector modes. Radiated Emissions The EUT is placed on a turn table, which is 0.8 m above ground plane. The turntable shall rotate 360 degrees to determine the position of maximum emission level. EUT is set 3m away from the receiving antenna, which varied from 1m to 4m to find out the highest emission. And also, each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. In order to find out the maximum emissions, exploratory radiated emission measurements were made according to the requirements in Section 13.1.4.1 of ANSI C63.4 (2003). Page 6 Rev.00

Compliance Certification Services Inc. FCC ID: FSUGMZKI Report No.: T121029D04-RP1 3.4. FCC PART 15.205 RESTRICTED BANDS OF OPERATIONS (a) Except as shown in paragraph (d) of this section, only spurious emissions are permitted in any of the frequency bands listed below: MHz MHz MHz GHz 0.090 - 0.110 16.42 - 16.423 399.9 - 410 4.5 - 5.15 1 0.495 - 0.505 16.69475 - 16.69525 608 - 614 5.35 - 5.46 2.1735 - 2.1905 16.80425 - 16.80475 960 - 1240 7.25 - 7.75 4.125 - 4.128 25.5 - 25.67 1300 - 1427 8.025 - 8.5 4.17725 - 4.17775 37.5 - 38.25 1435 - 1626.5 9.0 - 9.2 4.20725 - 4.20775 73 - 74.6 1645.5 - 1646.5 9.3 - 9.5 6.215 - 6.218 74.8 - 75.2 1660 - 1710 10.6 - 12.7 6.26775 - 6.26825 108 - 121.94 1718.8 - 1722.2 13.25 - 13.4 6.31175 - 6.31225 123 - 138 2200 - 2300 14.47 - 14.5 8.291 - 8.294 149.9 - 150.05 2310 - 2390 15.35 - 16.2 8.362 - 8.366 156.52475 - 2483.5 - 2500 17.7 - 21.4 8.37625 - 8.38675 156.52525 2655 - 2900 22.01 - 23.12 8.41425 - 8.41475 156.7 - 156.9 3260 - 3267 23.6 - 24.0 12.29 - 12.293 162.0125 - 167.17 3332 - 3339 31.2 - 31.8 12.51975 - 12.52025 167.72 - 173.2 3345.8 - 3358 36.43 - 36.5 12.57675 - 12.57725 240 - 285 3600 - 4400 (2) 13.36 - 13.41 322 - 335.4 1 Until February 1, 1999, this restricted band shall be 0.490-0.510 MHz. 2 Above 38.6 (b) Except as provided in paragraphs (d) and (e), the field strength of emissions appearing within these frequency bands shall not exceed the limits shown in Section 15.209. At frequencies equal to or less than 1000 MHz, compliance with the limits in Section 15.209 shall be demonstrated using measurement instrumentation employing a CISPR quasi-peak detector. Above 1000 MHz, compliance with the emission limits in Section 15.209 shall be demonstrated based on the average value of the measured emissions. The provisions in Section 15.35 apply to these measurements. 3.5. DESCRIPTION OF TEST MODES The EUT (model: GT-120002) had been tested under operating condition. Test program used to control the EUT for staying in continuous transmitting mode was programmed. After verification, all tests were carried out with the worst case test modes as shown below 1GHz. Channel 960kHz were chosen for full testing. Page 7 Rev.00

Compliance Certification Services Inc. FCC ID: FSUGMZKI Report No.: T121029D04-RP1 4 INSTRUMENT CALIBRATION 4.1. MEASURING INSTRUMENT CALIBRATION The measuring equipment, which was utilized in performing the tests documented herein, has been calibrated in accordance with the manufacturer's recommendations for utilizing calibration equipment, which is traceable to recognized national standards. 4.2. MEASUREMENT EQUIPMENT USED Equipment Used for Emissions Measurement Remark: Each piece of equipment is scheduled for calibration once a year and Loop Antenna is scheduled for calibration once three years. 3M Chamber Test Site Name of Equipment Manufacturer Model Serial Number Calibration Due Spectrum Analyzer Agilent E4446A US42510268 11/06/2013 EMI Test Receiver R&S ESCI 100064 03/01/2013 Pre-Amplifier Mini-Circults ZFL-1000LN SF350700823 01/13/2013 AFS44-00102650- Pre-Amplifier MITEQ 1415367 11/19/2013 42-10P-44 Bilog Antenna Sunol Sciences JB3 A030105 10/02/2013 Horn Antenna EMCO 3117 00055165 02/14/2013 Turn Table CCS CC-T-1F N/A N.C.R Antenna Tower CCS CC-A-1F N/A N.C.R Controller CCS CC-C-1F N/A N.C.R Site NSA CCS N/A N/A 12/23/2012 Test S/W EZ-EMC (CCS-3A1RE) Conducted Emission room # B Name of Equipment Manufacturer Model Serial Number Calibration Due EMI Test Receiver R&S ESCI 101203 09/13/2013 LISN R&S ESH3-Z5 848773/014 12/06/2013 LISN SCHWARZBECK NSLK 8127 8127-541 12/14/2012 Coaxial Cable Commate CFD300-NL NA 12/06/2013 Test S/W CCS-3A1-CE Page 8 Rev.00

Compliance Certification Services Inc. FCC ID: FSUGMZKI Report No.: T121029D04-RP1 4.3. MEASUREMENT UNCERTAINTY PARAMETER UNCERTAINTY Powerline Conducted Emission +/- 1.2575 3M Semi Anechoic Chamber / 30M~200M +/- 4.0138 3M Semi Anechoic Chamber / 200M~1000M +/- 3.9483 3M Semi Anechoic Chamber / 1G~8G +/- 2.5975 3M Semi Anechoic Chamber / 8G~18G +/- 2.6112 3M Semi Anechoic Chamber / 18G~26G +/- 2.7389 3M Semi Anechoic Chamber / 26G~40G +/- 2.9683 Remark: This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. Page 9 Rev.00

Compliance Certification Services Inc. FCC ID: FSUGMZKI Report No.: T121029D04-RP1 5 FACILITIES AND ACCREDITATIONS 5.1. FACILITIES All measurement facilities used to collect the measurement data are located at No.199, Chunghsen Road, Hsintien City, Taipei Hsien, Taiwan, R.O.C. Tel: 886-2-2217-0894 / Fax: 886-2-2217-1029 No.11, Wugong 6th Rd., Wugu Dist., New Taipei City 24891, Taiwan. (R.O.C.) Tel: 886-2-2299-9720 / Fax: 886-2-2298-4045 No.81-1, Lane 210, Bade 2nd Rd., Lujhu Township, Taoyuan County 33841, TAIWAN, R.O.C. Tel: 886-3-324-0332 / Fax: 886-3-324-5235 The sites are constructed in conformance with the requirements of ANSI C63.7, ANSI C63.4 (2003) and CISPR Publication 22. 5.2. EQUIPMENT Radiated emissions are measured with one or more of the following types of linearly polarized antennas: tuned dipole, biconical, log periodic, bi-log, and/or ridged waveguide, horn. Spectrum analyzers with pre-selectors and quasi-peak detectors are used to perform radiated measurements. Conducted emissions are measured with Line Impedance Stabilization Networks and EMI Test Receivers. Calibrated wideband preamplifiers, coaxial cables, and coaxial attenuators are also used for making measurements. All receiving equipment conforms to CISPR Publication 16-1, “Radio Interference Measuring Apparatus and Measurement Methods.” Page 10 Rev.00

Compliance Certification Services Inc. FCC ID: FSUGMZKI Report No.: T121029D04-RP1 5.3. TABLE OF ACCREDITATIONS AND LISTINGS Country Agency Scope of Accreditation Logo 3M Semi Anechoic Chamber (FCC MRA: TW1039) to perform USA FCC FCC Part 15 measurements FCC MRA: TW1039 LP0002, RTTE01, FCC Method-47 CFR Part 15 Subpart C, D, E, RSS-210, RSS-310 IDA TS SRD, AS/NZS 4268, AS/NZS 4771, TS 12.1 & 12,2, ETSI EN 300 440-1, ETSI EN 300 440-2, ETSI EN 300 328, ETSI EN 300 220-1, ETSI EN 300 220-2, ETSI EN 301 893, ETSI EN 301 489-1/3/7/17 Taiwan TAF FCC OET Bulletin 65 + Supplement C, EN 50360, EN 50361, EN 50371, RSS 102, EN 50383, EN 50385, EN 50392, IEC 62209, CNS 14958-1, CNS 14959 FCC Method –47 CFR Part 15 Subpart B IEC / EN 61000-3-2, IEC / EN 61000-3-3, IEC / EN 61000-4-2/3/4/5/6/8/11 Industry Canada 3M Semi Anechoic Chamber (IC 2324G-1 / IC 2324G-2) to perform IC 2324G-1 Canada IC 2324G-2 Note: No part of this report may be used to claim or imply product endorsement by A2LA, TAF or other government agency. Page 11 Rev.00

Compliance Certification Services Inc. FCC ID: FSUGMZKI Report No.: T121029D04-RP1 6 SETUP OF EQUIPMENT UNDER TEST 6.1. SETUP CONFIGURATION OF EUT See test photographs attached in Appendix 1 for the actual connections between EUT and support equipment. 6.2. SUPPORT EQUIPMENT No. Device Type Brand Model Series No. FCC ID Data Cable Power Cord AC I/P: Unshielded, 1.8m 1 Notebook PC HP dv6-1332TX CNF9491GM9 PD9112BNHU N/A DC O/P: Unshielded, 1.8m with a core AC I/P: Unshielded, 1.8m 2 Notebook PC DELL PP19L GK102 A00 QDS-BRCM1021 N/A DC O/P: Unshielded, 1.8m with a core CN-0XK290-7161 FCC 3 LCD Monitor DELL 3008WFP Unshielded, 1.8m Shielded, 1.8m 8-846-169L DoC FCC 4 Printer EPSON STYLUS C60 DR3K041995 Shielded, 1.8m Unshielded, 1.8m DoC FCC 5 1TB 3.5" HDD Buffalo HD-HX1.0TU3-AP 15564891207204 Shielded, 1m N/A DoC FCC 6 USB Mouse DELL M056U0A F0R00D2V Shielded, 1.8m N/A DoC Remark: Grounding was established in accordance with the manufacturer’s requirements and conditions for the intended use. Page 12 Rev.00

Compliance Certification Services Inc. FCC ID: FSUGMZKI Report No.: T121029D04-RP1 7 FCC PART 15.209 REQUIREMENTS 7.1. RADIATED EMISSIONS LIMIT 1. According to §15.209(a), except as provided elsewhere in this Subpart, the emissions from an intentional radiator shall not exceed the field strength levels specified in the following table: Field Strength Measurement Distance Frequency (MHz) (μV/m) (m) 0.009–0.490 2400/F(kHz) 300 0.490–1.705 24000/F(kHz) 30 1.705–30.0 30 30 30–88 100** 3 88–216 150** 3 216–960 200** 3 Above 960 500 3 Remark: Except as provided in paragraph (g), fundamental emissions from intentional radiators operating under this Section shall not be located in the frequency bands 54-72 MHz, 76-88 MHz, 174-216 MHz or 470-806 MHz. However, operation within these frequency bands is permitted under other sections of this Part, e.g., Sections 15.231 and 15.241. 2. In the emission table above, the tighter limit applies at the band edges. Field Strength Field Strength Frequency (Hz) (μV/m at 3-meter) (dBμV/m at 3-meter) 30-88 100 40 88-216 150 43.5 216-960 200 46 Above 960 500 54 Page 13 Rev.00

Compliance Certification Services Inc. FCC ID: FSUGMZKI Report No.: T121029D04-RP1 TEST CONFIGURATION 9kHz ~ 30MHz 3m Loop antenna EUT Spectrum / Receiver Turntable 1m 0.8m Reference ground plane 30MHz ~ 1 GHz Antenna tower 3m Bilog antenna EUT 4m Spectrum / Receiver Turntable 1m 0.8m Pre-amp Reference ground plane Page 14 Rev.00

Compliance Certification Services Inc. FCC ID: FSUGMZKI Report No.: T121029D04-RP1 TEST PROCEDURE For 9kHz ~ 30MHz 1. The EUT is placed on a turntable, which is 0.8m above ground plane. 2. The turntable shall be rotated for 360 degrees to determine the position of maximum emission level. 3. EUT is set 3m away from the receiving antenna, The center of the loop shall be 1 m above the ground then to find out the highest emissions. 4. Maximum procedure was performed on the six highest emissions to ensure EUT compliance. 5. And also, each emission was to be maximized by rotated of receiving antenna axis 6. Set the spectrum analyzer in the following setting as: RBW=10kHz / VBW=30kHz / Sweep=AUTO 7. Repeat above procedures until the measurements for all frequencies are complete. For 30MHz ~ 1GHz 1. The EUT is placed on a turntable, which is 0.8m above ground plane. 2. The turntable shall be rotated for 360 degrees to determine the position of maximum emission level. 3. EUT is set 3m away from the receiving antenna, which is varied from 1m to find out the highest emissions. 4. Maximum procedure was performed on the six highest emissions to ensure EUT compliance. 5. And also, each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. 6. Set the spectrum analyzer in the following setting as: RBW=100kHz / VBW=300kHz / Sweep=AUTO 7. Repeat above procedures until the measurements for all frequencies are complete. TEST RESULTS No non-compliance noted. Page 15 Rev.00

Compliance Certification Services Inc. FCC ID: FSUGMZKI Report No.: T121029D04-RP1 TEST DATA For 9kHz ~ 30MHz Operation Mode: TX mode Test Date: December 3, 2012 Temperature: 26°C Tested by: Shawn Wu Humidity: 50 % RH Polarity: Ver. / Hor. Correction Frequency Reading Result Limit 3m Margin Detector Mode Factor (MHz) (dBuV) (dBuV/m) (dBuV/m) (dB) (PK/QP/AVG) (dB/m) 0.960 46.27 19.28 65.55 67.96 -2.41 Peak 0.0090 122.41 0.00 122.41 128.51 -6.10 Peak 0.1701 45.52 32.90 78.42 116.88 -38.46 Peak 0.1903 43.18 32.21 75.39 115.43 -40.04 Peak 0.2235 52.28 31.09 83.37 113.03 -29.66 Peak 0.2548 52.32 30.10 82.42 110.77 -28.35 Peak 0.4708 51.59 26.18 77.77 95.19 -17.42 Peak 0.4900 38.35 25.83 64.18 73.80 -9.62 Peak 1.4048 37.74 16.65 54.39 65.64 -11.25 Peak 6.5986 26.98 6.98 33.96 69.50 -35.54 Peak 14.1235 21.65 5.66 27.31 69.50 -42.19 Peak 24.6292 17.48 5.47 22.95 69.50 -46.55 Peak Remark: 1. Measuring frequencies from 9kHz to the 1GHz. 2. Radiated emissions measured in frequency range from 9kHz to 1000MHz were made with an instrument using peak/quasi-peak/average detector mode. 3. Measurements above show only up to 6 maximum emissions noted, or would be lesser, with “ N/A ” remark, if no specific emissions from the EUT are recorded (ie: margin>20dB from the applicable limit) and considered that's already beyond the background noise floor. 4. Margin (dB) = Result (dBuV/m) – Limit (dBuV/m). 5. 960kHz Limi t= 20log(24000/960)+40log(30/3)=67.96 Page 16 Rev.00

Compliance Certification Services Inc. FCC ID: FSUGMZKI Report No.: T121029D04-RP1 For 30MHz ~ 1GHz Operation Mode: Normal Link Test Date: December 3, 2012 o Temperature: 27 C Tested by: Shawn Wu Humidity: 53 % RH Polarity: Ver. / Hor. Detector Frequency Reading Factor Actual FS Limit 3m Safe Margin Ant.Pol. Mode (MHz) (dBuV) (dB) (dBuV/m) (dBuV/m) (dB) H/V (PK/QP) 33.2333 36.69 -7.29 29.40 40.00 -10.60 V Peak 144.7833 40.18 -12.84 27.34 43.50 -16.16 V Peak 299.9833 40.06 -11.18 28.88 46.00 -17.12 V Peak 432.5500 32.91 -8.98 23.93 46.00 -22.07 V Peak 500.4500 33.41 -8.13 25.28 46.00 -20.72 V Peak 600.6833 34.04 -7.13 26.91 46.00 -19.09 V Peak 144.7833 35.61 -12.84 22.77 43.50 -20.73 H Peak 259.5667 36.36 -12.38 23.98 46.00 -22.02 H Peak 288.6667 42.20 -11.34 30.86 46.00 -15.14 H Peak 322.6167 38.22 -10.77 27.45 46.00 -18.55 H Peak 384.0500 34.50 -9.84 24.66 46.00 -21.34 H Peak 414.7667 32.65 -9.33 23.32 46.00 -22.68 H Peak Remark: 1. No emission found between lowest internal used / generated frequency to 30 MHz. (9kHz ~ 30MHz) 2. Measuring frequencies from 30 MHz to the 1GHz. 3. Radiated emissions measured in frequency range from 30 MHz to 1000MHz were made with an instrument using Peak detector mode. 4. Data of measurement within this frequency range shown “ --- ” in the table above means the reading of emissions are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. 5. The IF bandwidth of SPA between 30MHz to 1GHz was 100kHz. Page 17 Rev.00

Compliance Certification Services Inc. FCC ID: FSUGMZKI Report No.: T121029D04-RP1 7.2. POWERLINE CONDUCTED EMISSIONS LIMIT For an intentional radiator which is designed to be connected to the public utility (AC) power line, the radio frequency voltage that is conducted back onto the AC power line on any frequency or frequencies within the band 150 kHz to 30 MHz shall not exceed 250 microvolts (The limit decreases linearly with the logarithm of the frequency in the range 0.15 MHz to 0.50 MHz). The limits at specific frequency range is listed as follows: Limits Frequency Range (dBμV) (MHz) Quasi-peak Average 0.15 to 0.50 66 to 56* 56 to 46* 0.50 to 5 56 46 5 to 30 60 50 Compliance with this provision shall be based on the measurement of the radio frequency voltage between each power line (LINE and NEUTRAL) and ground at the power terminals. TEST CONFIGURATION See test photographs attached in Appendix I for the actual connections between EUT and support equipment. TEST PROCEDURE 1. The EUT was placed on a table, which is 0.8m above ground plane. 2. Maximum procedure was performed on the six highest emissions to ensure EUT compliance. 3. Repeat above procedures until all frequency measured were complete. TEST RESULTS The initial step in collecting conducted data is a spectrum analyzer peak scan of the measurement range. Significant peaks are then marked as shown on the following data page, and these signals are then quasi-peaked. Page 18 Rev.00

Compliance Certification Services Inc. FCC ID: FSUGMZKI Report No.: T121029D04-RP1 TEST DATA The initial step in collecting conducted data is a spectrum analyzer peak scan of the measurement range. Significant peaks are then marked as shown on the following data page, and these signals are then quasi-peaked. Operation Mode: Normal Link Test Date: December 7, 2012 Temperature: 26°C Tested by: Rex Huang Humidity: 60% RH QP AV Corr. QP AV QP AV QP AV Freq. Reading Reading factor Result Result Limit Limit Margin Margin Note (MHz) (dBuV) (dBuV) (dB) (dBuV) (dBuV) (dBuV) (dBuV) (dB) (dB) 0.1500 51.86 40.06 0.14 52.00 40.20 65.99 56.00 -13.99 -15.80 L1 0.2100 44.67 32.47 0.13 44.80 32.60 63.20 53.21 -18.40 -20.61 L1 0.3600 23.86 13.56 0.14 24.00 13.70 58.73 48.73 -34.73 -35.03 L1 1.1400 21.16 19.26 0.14 21.30 19.40 56.00 46.00 -34.70 -26.60 L1 2.6400 29.23 27.33 0.07 29.30 27.40 56.00 46.00 -26.70 -18.60 L1 12.5100 38.97 35.27 0.33 39.30 35.60 60.00 50.00 -20.70 -14.40 L1 0.1500 51.10 39.30 0.10 51.20 39.40 65.99 56.00 -14.79 -16.60 L2 0.2100 45.30 33.50 0.10 45.40 33.60 63.20 53.21 -17.80 -19.61 L2 0.3600 26.20 21.70 0.10 26.30 21.80 58.73 48.73 -32.43 -26.93 L2 1.3500 23.54 19.94 0.06 23.60 20.00 56.00 46.00 -32.40 -26.00 L2 2.7000 21.40 10.90 0.00 21.40 10.90 56.00 46.00 -34.60 -35.10 L2 12.5100 42.30 38.40 0.10 42.40 38.50 60.00 50.00 -17.60 -11.50 L2 Remark: 1. Measuring frequencies from 0.15 MHz to 30MHz. 2. The emissions measured in frequency range from 0.15 MHz to 30MHz were made with an instrument using Quasi-peak detector and average detector. 3. The IF bandwidth of SPA between 0.15MHz and 30MHz was 10kHz; the IF bandwidth of Test Receiver between 0.15MHz and 30MHz was 9kHz; 4. L1 = Line One (Live Line) / L2 = Line Two (Neutral Line) Page 19 Rev.00

Compliance Certification Services Inc. FCC ID: FSUGMZKI Report No.: T121029D04-RP1 Test Plots Conducted emissions (Line 1) Conducted emissions (Line 2) Page 20 Rev.00


Document Created: 2012-12-14 13:17:06
Document Modified: 2012-12-14 13:17:06
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC