Test Report with Spurious data

FCC ID: FSUGMPAD

Test Report

Download: PDF

FCCID_118711

FCC TEST REPORT Report No. : F933103-Tx

FCC TEST REPORT
for

47 CFR Part 15, Subpart C

Equipment : TABLET

Model No. : PowerMate Wireless

FCC ID : FSUGMPAD

Filing Type : Original Grant

Applicant : KYE SYSTEMS CORP.
No. 492, Sec. 5, Chung Hsin Rd., San Chung, Taipei
Hsien, 241, Taiwan, R.O.C.

! The test result refers exclusively to the test presented test model / sample.
! Without the written authorization of the test lab., the Test Report may not be copied.
! Certificate or Test Report must not be used by the applicant to claim the product in this test
report endorsement by NVLAP or any agency of U.S. government.

SPORTON International Inc.
6F, No.106, Sec. 1, Hsin Tai Wu Rd., Hsi Chih, Taipei Hsien, Taiwan, R.O.C.

SPORTON International Inc. FCC ID : FSUGMPAD
TEL : 886-2-2696-2468 Page No. : 1 of 27
FAX : 886-2-2696-2255 Issued Date : Sep. 21, 2000

FCC TEST REPORT Report No. : F933103-Tx

Table of Contents

CERTIFICATE OF COMPLIANCE .............................................................................................................. 3
1. General Description of Equipment under Test ..................................................................................... 4
1.1. Applicant..............................................................................................................................................................................................................4
1.2. Manufacturer .......................................................................................................................................................................................................4
1.3. Basic Description of Equipment under Test...................................................................................................................................................4
1.4. Feature of Equipment under Test....................................................................................................................................................................4

2. Test Configuration of Equipment under Test ....................................................................................... 5
2.1. Test Manner ........................................................................................................................................................................................................5
2.2. Description of Test System...............................................................................................................................................................................5
2.3. Connection Diagram of Test System ..............................................................................................................................................................7

3. Test Software ....................................................................................................................................... 8
4. General Information of Test ................................................................................................................. 9
4.1. Test Facility .........................................................................................................................................................................................................9
4.2. Standard for Methods of Measurement..........................................................................................................................................................9
4.3. Test in Compliance with....................................................................................................................................................................................9
4.4. Frequency Range Investigated ........................................................................................................................................................................9
4.5. Test Distance ......................................................................................................................................................................................................9

5. Test of Radiated Emission (Spurious emission)................................................................................. 10
5.1. Major Measuring Instruments.........................................................................................................................................................................10
5.2. Test Procedures ...............................................................................................................................................................................................11
5.3. Typical Test Setup Layout of Radiated Emission .......................................................................................................................................12
5.4. Test Result of Radiated Emission (Spurious emission) .............................................................................................................................13

6. Test of Radiated Emission (Fundamental emission) .......................................................................... 14
6.1. Major Measuring Instruments.........................................................................................................................................................................14
6.2. Test Procedures ...............................................................................................................................................................................................15
6.3. Typical Test Setup Layout of Radiated Emission .......................................................................................................................................16
6.4. Test Result of Radiated Emission (Fundamental emission) .....................................................................................................................17
6.5. Photographs of Radiated Emission Test Configuration.............................................................................................................................18

7. List of Measuring Equipments Used................................................................................................... 19

SPORTON International Inc. FCC ID : FSUGMPAD
TEL : 886-2-2696-2468 Page No. : 2 of 27
FAX : 886-2-2696-2255 Issued Date : Sep. 21, 2000

FCC TEST REPORT Report No. : F933103-Tx

Certificate No. : F933103-2

CERTIFICATE OF COMPLIANCE
for

47 CFR Part 15, Subpart C

Equipment : TABLET

Model No. : PowerMate Wireless

FCC ID : FSUGMPAD

Applicant : KYE SYSTEMS CORP.
No. 492, Sec. 5, Chung Hsin Rd., San Chung, Taipei
Hsien, 241, Taiwan, R.O.C.

I HEREBY CERTIFY THAT :
The measurements shown in this test report were made in accordance with the procedures given in ANSI
C63.4 - 1992 and the energy emitted by this equipment was passed 47 CFR Part 15, Subpart C emission
limits. Testing was carried out on Sep. 21, 2000 at SPORTON International Inc. LAB. in Lin Kou.

______________________________
W. L. Huang
General Manager

SPORTON International Inc.
6F, No.106, Sec. 1, Hsin Tai Wu Rd., Hsi Chih, Taipei Hsien, Taiwan, R.O.C.

SPORTON International Inc. FCC ID : FSUGMPAD
TEL : 886-2-2696-2468 Page No. : 3 of 27
FAX : 886-2-2696-2255 Issued Date : Sep. 21, 2000

FCC TEST REPORT Report No. : F933103-Tx

2. Test Configuration of Equipment under Test

2.1. Test Manner
a. The EUT has been associated with personal computer and peripherals pursuant to ANSI C63.4-1992
and configuration operated in a manner which tended to maximize its emission characteristics in a
typical application.
b. The SONY Monitor, DELL PS/2 Keyboard, HP Printer, ACEEX Modem and EUT were connected to the
FIC PC for EMI test.
c. Frequency range investigated: radiation 0.345 MHz to30MHz.

2.2. Description of Test System

Support Unit 1. -- Personal Computer (FIC)
FCC ID : N/A
Model No. : P2L97
Power Supply Type : Switching
Power Cord : Non-Shielded
Serial No. : SP0037
Data Cable : Shielded, 360 degree via metal backshells
Remark : This support device was tested to compy with FCC standards and
authorized under a declaration of conformity.

Support Unit 2. -- Monitor (SONY)
FCC ID : AK8GDM17SE2T
Model No. : GDM-17SE2T
Power Supply Type : Switching
Power Cord : Non-Shielded
Serial No. : SP0063
Data Cable : Double-Shielded, 360 degree via metal backshells, 1.7m

Support Unit 3. -- PS/2 Keyboard (DELL)
FCC ID : GYUM92SK
Model No. : AT101(DE8M)
Serial No. : SP0054
Data Cable : Shielded, 360 degree via metal backshells, 1.9m

SPORTON International Inc. FCC ID : FSUGMPAD
TEL : 886-2-2696-2468 Page No. : 5 of 27
FAX : 886-2-2696-2255 Issued Date : Sep. 21, 2000

FCC TEST REPORT Report No. : F933103-Tx

Support Unit 4. -- Modem (ACEEX)
FCC ID : IFAXDM1414
Model No. : DM1414
Power Supply Type : Linear
Power Cord : Non-Shielded
Serial No. : SP0015
Data Cable : Shielded, 360 degree via metal backshells, 1.15m

Support Unit 5. -- Printer (HP)
FCC ID : B94C2642X
Model No. : DeskJet 400
Power Supply Type : Linear
Power Cord : Non-Shielded
Serial No. : SP0048
Data Cable : Braided-Shielded, 1.35m

SPORTON International Inc. FCC ID : FSUGMPAD
TEL : 886-2-2696-2468 Page No. : 6 of 27
FAX : 886-2-2696-2255 Issued Date : Sep. 21, 2000

FCC TEST REPORT Report No. : F933103-Tx

2.3. Connection Diagram of Test System

1 2
4

modem

PC Printer
Monitor EUT

5
3

KEYBOARD
EUT

1. The I/O cable is connected from PC to the support unit 4.
2. The I/O cable is connected from PC to the support unit 5.
3. The I/O cable is connected from PC to the support unit 3.
4. The I/O cable is connected from PC to the support unit 2.
5. The I/O cable is connected from PC to the EUT.

SPORTON International Inc. FCC ID : FSUGMPAD
TEL : 886-2-2696-2468 Page No. : 7 of 27
FAX : 886-2-2696-2255 Issued Date : Sep. 21, 2000

FCC TEST REPORT Report No. : F933103-Tx

3. Test Software
An executive program, EMITEST.EXE under WIN 98, which generates a complete line of continuously
repeating " H" pattern was used as the test software.

The program was executed as follows :
a. Turn on the power of all equipment.
b. The PC reads the test program from the floppy disk drive and runs it.
c. The PC sends " H" messages to the monitor, and the monitor displays " H" patterns on the screen.
d. The PC sends " H" messages to the printer, then the printer prints them on the paper.
e. The PC sends " H" messages to the modem.
f. The PC sends " H" messages to the internal Hard Disk, and the Hard Disk reads and writes the
message.
g. Repeat the steps from b to f.

At the same time, "WordPad" of Accessories under Win 98 was used as the test software.

SPORTON International Inc. FCC ID : FSUGMPAD
TEL : 886-2-2696-2468 Page No. : 8 of 27
FAX : 886-2-2696-2255 Issued Date : Sep. 21, 2000

FCC TEST REPORT Report No. : F933103-Tx

4. General Information of Test

4.1. Test Facility

This test was carried out by SPORTON International Inc. in an openarea test site.
Openarea Test Site Location : No. 30-2, Lin 6, Diing-Fwu Tsuen, Lin-Kou-Hsiang,
Taipei Hsien, Taiwan, R.O.C.
TEL : 886-2-2601-1640
FAX : 886-2-2601-1695

4.2. Standard for Methods of Measurement

ANSI C63.4-1992

4.3. Test in Compliance with

FCC Part 15 Subpart C

4.4. Frequency Range Investigated

a. Radiation : from 0.345 MHz to 30 MHz

4.5. Test Distance

The test distance of radiated emission from antenna to EUT is 3 M.

SPORTON International Inc. FCC ID : FSUGMPAD
TEL : 886-2-2696-2468 Page No. : 9 of 27
FAX : 886-2-2696-2255 Issued Date : Sep. 21, 2000

FCC TEST REPORT Report No. : F933103-Tx

5. Test of Radiated Emission (Spurious emission)

Radiated emissions from 30 MHz to 1,000 MHz were measured with a bandwidth of 120 kHz according to
the methods defines in ANSI C63.4-1992. The EUT was placed on a nonmetallic stand in the open-field
site, 0.8 meter above the ground plane, as shown in section 5.3. The interface cables and equipment
positions were varied within limits of reasonable applications to determine the positions producing maximum
radiated emissions.

5.1. Major Measuring Instruments

Amplifier (HP 8447D)
Attenuation 0 dB
RF Gain 25 dB
Signal Input 0.1 MHz to 1.3 GHz

Spectrum Analyzer (HP 8568B)
Attenuation 0 dB
Start Frequency 30 MHz
Stop Frequency 1,000 MHz
Resolution Bandwidth 1 MHz
Video Bandwidth 1 MHz
Signal Input 100 Hz to 1.5 GHz

Quasi-Peak Adapter (85650A)
Resolution Bandwidth 120 KHz
Frequency Band 30 MHz to 1 GHz
Quasi-Peak Detector ON for Quasi-Peak Mode
OFF for Peak Mode

SPORTON International Inc. FCC ID : FSUGMPAD
TEL : 886-2-2696-2468 Page No. : 10 of 27
FAX : 886-2-2696-2255 Issued Date : Sep. 21, 2000

FCC TEST REPORT Report No. : F933103-Tx

5.2. Test Procedures
a. The EUT was placed on a rotatable table top 0.8 meter above ground.
b. The EUT was set 10 meters from the interference receiving antenna which was mounted on the top of a
variable height antenna tower.
c. The table was rotated 360 degrees to determine the position of the highest radiation.
d. The antenna is a half wave dipole and its height is varied between one meter and four meters above
ground to find the maximum value of the field strength both horizontal polarization and vertical
polarization of the antenna are set to make the measurement.
e. For each suspected emission the EUT was arranged to its worst case and then tune the antenna tower
(from 1 M to 4 M) and turn table (from 0 degree to 360 degrees) to find the maximum reading.
f. Set the test-receiver system to Peak Detect Function and specified bandwidth with Maximum Hold
Mode.
g. If the emission level of the EUT in peak mode was 6 dB lower than the limit specified, then testing will be
stopped and peak values of EUT will be reported, otherwise, the emissions which do not have 6 dB
margin will be repeated one by one using the quasi-peak method and reported.

SPORTON International Inc. FCC ID : FSUGMPAD
TEL : 886-2-2696-2468 Page No. : 11 of 27
FAX : 886-2-2696-2255 Issued Date : Sep. 21, 2000

FCC TEST REPORT Report No. : F933103-Tx

5.3. Typical Test Setup Layout of Radiated Emission

FRP Room Antenna

Equipment under Test

" 10 M for FCC test

0.8 M
Ground Plane

Receiver
TurnTable

SPORTON International Inc. FCC ID : FSUGMPAD
TEL : 886-2-2696-2468 Page No. : 12 of 27
FAX : 886-2-2696-2255 Issued Date : Sep. 21, 2000

FCC TEST REPORT Report No. : F933103-Tx

5.4. Test Result of Radiated Emission (Spurious emission)
! Test Distance : 10 M
! Temperature : 24°C
! Relative Humidity : 51 %
! Test Date : Mar. 29, 1999
! Emission level (dBuV/m) = 20 log Emission level (uV/m)
! Corrected Reading : Antenna Factor + Cable Loss + Reading = Emission

The Radiated Emission test was passed at minimum margin

o
199.90 MHz / 24.50 dBuV (VERTICAL) Antenna Height 1.2 Meter, Turntable Degree 122 .

Frequency Antenna Cable Reading Limits Emission Level Margin

Polarity Factor Loss

( MHz ) (dB/m) ( dB ) ( dBuV ) (dBuV/m) (uV/m) (dBuV/m) (uV/m) ( dB )

200.10 H 8.80 1.40 12.20 30.00 32 22.40 13.18 -7.60

430.40 H 16.09 2.26 11.35 37.00 71 29.70 30.55 -7.30

33.10 V 16.82 0.80 3.39 30.00 32 21.01 11.23 -8.99

44.20 V 10.50 0.80 10.07 30.00 32 21.37 11.71 -8.63

55.20 V 6.70 0.80 14.18 30.00 32 21.68 12.13 -8.32

199.90 V 8.80 1.40 14.30 30.00 32 24.50 16.79 -5.50

Test Engineer : __________________
JONES JAN

SPORTON International Inc. FCC ID : FSUGMPAD
TEL : 886-2-2696-2468 Page No. : 13 of 27
FAX : 886-2-2696-2255 Issued Date : Sep. 21, 2000

FCC TEST REPORT Report No. : F933103-Tx

6. Test of Radiated Emission (Fundamental emission)

Radiated emissions from 0.345 MHz to 30 MHz were measured with a bandwidth of 120 kHz according to
the methods defines in ANSI C63.4-1992. The EUT was placed on a nonmetallic stand in the open-field
site, 0.8 meter above the ground plane, as shown in section 6.3. The interface cables and equipment
positions were varied within limits of reasonable applications to determine the positions producing maximum
radiated emissions.

6.1. Major Measuring Instruments

Test Receiver ( R&S ESCS30 )
Resolution Bandwidth 120 KHz
Frequency Band 9 KHz to 2.75 GHz
Quasi-Peak Detector ON for Quasi-Peak Mode
OFF for Peak Mode

SPORTON International Inc. FCC ID : FSUGMPAD
TEL : 886-2-2696-2468 Page No. : 14 of 27
FAX : 886-2-2696-2255 Issued Date : Sep. 21, 2000

FCC TEST REPORT Report No. : F933103-Tx

6.2. Test Procedures
a. The EUT was placed on a rotatable table top 0.8 meter above ground.
b. The EUT was set 3 meters from the interference receiving antenna which was mounted on the top of a
variable height antenna tower.
c. The table was rotated 360 degrees to determine the position of the highest radiation.
d. The loop antenna was oriented horizontally and vertically. Rotate the loop antenna 360 degrees on its
vertical axis to find the maximum value of the field strength both horizontal polarization and vertical
polarization.
e. Set the test-receiver system to Average Detect Function. (According to 15.209 of 47 CFR., 345KHz is
based on measurement employing an Average detector.)

SPORTON International Inc. FCC ID : FSUGMPAD
TEL : 886-2-2696-2468 Page No. : 15 of 27
FAX : 886-2-2696-2255 Issued Date : Sep. 21, 2000

FCC TEST REPORT Report No. : F933103-Tx

6.3. Typical Test Setup Layout of Radiated Emission

FRP Room

Loop Antenna
Equipment under Test

"# 3M

0.8 M
Ground Plane

Receiver
TurnTable

SPORTON International Inc. FCC ID : FSUGMPAD
TEL : 886-2-2696-2468 Page No. : 16 of 27
FAX : 886-2-2696-2255 Issued Date : Sep. 21, 2000

FCC TEST REPORT Report No. : F933103-Tx

6.4. Test Result of Radiated Emission (Fundamental emission)

$ Equipment meets the technical specifications of 15.209
$ Frequency Range of Test : from 230KHz to 30 MHz
$ Test Distance : 3 M
$ Temperature : 27
$ Relative Humidity : 55% RH
$ Test Date :Sep. 21, 2000
$ Limits at 3 meters are calculated by following methed:
for the limit at 345Khz per 15.209 is 2400/345=6.957uV/m at 300m, To determine the level at the 3m
test distance take 20 log (6.957)=16.85dBuV/m and then per 15.31 (f)(2) a 40dB/decade correction
factor may be used below 30Mhz giving a 3m limit of 96.85dBuV/m.
$ Emission level (dBuV/m)=20log emission level (uV/m)
$ Sample Calculation at 0.345MHz
Corrected Reading = 0.1+ 68.4= 68.5 (dBuV/m )
$ Remark: The R&S test receiver will automatically offset the antenna factor, therefore, the reading value
shown on the R&S test receiver is included receiving value added antenna factor.

Frequency Cable Reading Limits Emission Level Margin
Polarity Loss Orthogonal
( MHz ) ( dB ) ( dBuV ) (dBuV/m) (uV/m) (dBuV/m) (uV/m) ( dB )

0.345 H 0.10 68.40 96.85 69582 68.50 2660.73 -28.35 X

0.345 H 0.10 68.40 96.85 69582 68.50 2660.73 -28.35 Y

0.345 H 0.10 66.50 96.85 69582 66.60 2137.96 -30.25 Z

0.345 V 0.10 67.10 96.85 69582 67.20 2290.87 -29.65 X

0.345 V 0.10 65.50 96.85 69582 65.60 1905.46 -31.25 Y

0.345 V 0.10 65.70 96.85 69582 65.80 1949.84 -31.05 Z

Remark:
1. Data shown in above three rows represents three orthogonal (X, Y, Z) .
2. Testing at Vertical Polarity, emission was too low to be detected.
3. This emission was base on measurements employing an average detector

SPORTON International Inc. FCC ID : FSUGMPAD
TEL : 886-2-2696-2468 Page No. : 17 of 27
FAX : 886-2-2696-2255 Issued Date : Sep. 21, 2000

FCC TEST REPORT Report No. : F933103-Tx

7. List of Measuring Equipments Used

Instrument Manufacturer Model No. Serial No. Characteristics Calibration
Date

Receiver R&S ESCS30 847793/003 9 K – 2.75 GHz Dec. 16, 1999

Loop Antenna R&S HFH2-Z2 824132 10KHz - 30MHz Dec. 18, 1999

SPORTON International Inc. FCC ID : FSUGMPAD
TEL : 886-2-2696-2468 Page No. : 19 of 27
FAX : 886-2-2696-2255 Issued Date : Sep. 21, 2000

Document Created: 2000-09-26 09:11:56
Document Modified: 2000-09-26 09:11:56

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC