Report

FCC ID: FSUGMPAD

Test Report

Download: PDF

FCCID_106624

FCC TEST REPORT Report No. : F933103-2

FCC TEST REPORT
for

CISPR PUB. 22 Class B

Equipment : P08 Mouse

Model No. : P08 Mouse for Cyberscroll wireless

FCC ID : FSUGMPAD

Filing Type : Original Grant

Applicant : KYE SYSTEMS CORP.
No. 492, Sec. 5, Chung Hsin Rd., San Chung, Taipei
Hsien, 241, Taiwan, R.O.C.

! The test result refers exclusively to the test presented test model / sample.
! Without the written authorization of the test lab., the Test Report may not be copied.
! Certificate or Test Report must not be used by the applicant to claim the product in this test
report endorsement by NVLAP or any agency of U.S. government.

SPORTON International Inc.
6F, No.106, Sec. 1, Hsin Tai Wu Rd., Hsi Chih, Taipei Hsien, Taiwan, R.O.C.

SPORTON International Inc. FCC ID : FSUGMPAD
TEL : 886-2-2696-2468 Page No. : 1 of 27
FAX : 886-2-2696-2255 Issued Date : Jun. 15, 1999

FCC TEST REPORT Report No. : F933103-2

Table of Contents

CERTIFICATE OF COMPLIANCE .............................................................................................................. 3
1. General Description of Equipment under Test ..................................................................................... 4
1.1. Applicant..............................................................................................................................................................................................................4
1.2. Manufacturer .......................................................................................................................................................................................................4
1.3. Basic Description of Equipment under Test...................................................................................................................................................4
1.4. Feature of Equipment under Test....................................................................................................................................................................4

2. Test Configuration of Equipment under Test ....................................................................................... 5
2.1. Test Manner ........................................................................................................................................................................................................5
2.2. Description of Test System...............................................................................................................................................................................5
2.3. Connection Diagram of Test System ..............................................................................................................................................................7

3. Test Software ....................................................................................................................................... 8
4. General Information of Test ................................................................................................................. 9
4.1. Test Facility .........................................................................................................................................................................................................9
4.2. Standard for Methods of Measurement..........................................................................................................................................................9
4.3. Test in Compliance with....................................................................................................................................................................................9
4.4. Frequency Range Investigated ........................................................................................................................................................................9
4.5. Test Distance ......................................................................................................................................................................................................9

5. Test of Conducted Powerline ............................................................................................................. 10
5.1. Major Measuring Instruments.........................................................................................................................................................................10
5.2. Test Procedures ...............................................................................................................................................................................................11
5.3. Typical Test Setup Layout of Conducted Powerline...................................................................................................................................12
5.4. Test Result of AC Powerline Conducted Emission.....................................................................................................................................13
5.5. Photographs of Counducted Powerline Test Configuration ......................................................................................................................14

6. Test of Radiated Emission.................................................................................................................. 16
6.1. Major Measuring Instruments.........................................................................................................................................................................16
6.2. Test Procedures ...............................................................................................................................................................................................17
6.3. Typical Test Setup Layout of Radiated Emission .......................................................................................................................................18
6.4. Test Result of Radiated Emission .................................................................................................................................................................19
6.5. Photographs of Radiated Emission Test Configuration.............................................................................................................................20

7. Antenna Factor & Cable Loss............................................................................................................. 22
8. List of Measuring Equipments Used................................................................................................... 23

SPORTON International Inc. FCC ID : FSUGMPAD
TEL : 886-2-2696-2468 Page No. : 2 of 27
FAX : 886-2-2696-2255 Issued Date : Jun. 15, 1999

FCC TEST REPORT Report No. : F933103-2

Certificate No. : F933103-2

CERTIFICATE OF COMPLIANCE
for

CISPR PUB. 22 Class B

Equipment : P08 Mouse

Model No. : P08 Mouse for Cyberscroll wireless

FCC ID : FSUGMPAD

Applicant : KYE SYSTEMS CORP.
No. 492, Sec. 5, Chung Hsin Rd., San Chung, Taipei
Hsien, 241, Taiwan, R.O.C.

I HEREBY CERTIFY THAT :
The measurements shown in this test report were made in accordance with the procedures given in ANSI
C63.4 - 1992 and the energy emitted by this equipment was passed CISPR PUB. 22 both radiated and
conducted emission class B limits. Testing was carried out on Jun. 12, 2000 at SPORTON International Inc.
LAB. in Lin Kou.

______________________________
W. L. Huang
General Manager

SPORTON International Inc.
6F, No.106, Sec. 1, Hsin Tai Wu Rd., Hsi Chih, Taipei Hsien, Taiwan, R.O.C.

SPORTON International Inc. FCC ID : FSUGMPAD
TEL : 886-2-2696-2468 Page No. : 3 of 27
FAX : 886-2-2696-2255 Issued Date : Jun. 15, 1999

FCC TEST REPORT Report No. : F933103-2

2. Test Configuration of Equipment under Test

2.1. Test Manner
a. The EUT has been associated with personal computer and peripherals pursuant to ANSI C63.4-1992
and configuration operated in a manner which tended to maximize its emission characteristics in a
typical application.
b. The SONY Monitor, DELL PS/2 Keyboard, HP Printer, ACEEX Modem and KYE tablet were connected
to the FIC PC for EMI test.
c. Frequency range investigated: conduction 150 KHz to 30 MHz, radiation 30 MHz to 1000MHz.

2.2. Description of Test System

Support Unit 1. -- Personal Computer (FIC)
FCC ID : N/A
Model No. : P2L97
Power Supply Type : Switching
Power Cord : Non-Shielded
Serial No. : SP0037
Data Cable : Shielded, 360 degree via metal backshells
Remark : This support device was tested to compy with FCC standards and
authorized under a declaration of conformity.

Support Unit 2. -- Monitor (SONY)
FCC ID : AK8GDM17SE2T
Model No. : GDM-17SE2T
Power Supply Type : Switching
Power Cord : Non-Shielded
Serial No. : SP0063
Data Cable : Double-Shielded, 360 degree via metal backshells, 1.7m

Support Unit 3. -- PS/2 Keyboard (DELL)
FCC ID : GYUM92SK
Model No. : AT101(DE8M)
Serial No. : SP0054
Data Cable : Shielded, 360 degree via metal backshells, 1.9m

SPORTON International Inc. FCC ID : FSUGMPAD
TEL : 886-2-2696-2468 Page No. : 5 of 27
FAX : 886-2-2696-2255 Issued Date : Jun. 15, 1999

FCC TEST REPORT Report No. : F933103-2

Support Unit 4. -- Modem (ACEEX)
FCC ID : IFAXDM1414
Model No. : DM1414
Power Supply Type : Linear
Power Cord : Non-Shielded
Serial No. : SP0015
Data Cable : Shielded, 360 degree via metal backshells, 1.15m

Support Unit 5. -- Printer (HP)
FCC ID : B94C2642X
Model No. : DeskJet 400
Power Supply Type : Linear
Power Cord : Non-Shielded
Serial No. : SP0048
Data Cable : Braided-Shielded, 1.35m

Support Unit 6. -- Tablet(KYE)
FCC ID : FSUGMPAD
Model No. : PowerMate Wireless
Power Supply Type : from PC
Power Cord : N/A
Serial No. : N/A
Data Cable : Shielded, 1.55m

SPORTON International Inc. FCC ID : FSUGMPAD
TEL : 886-2-2696-2468 Page No. : 6 of 27
FAX : 886-2-2696-2255 Issued Date : Jun. 15, 1999

FCC TEST REPORT Report No. : F933103-2

2.3. Connection Diagram of Test System

1
4 2

m odem
Printer
M onitor EU T

5
3
E
U
K EY BO A RD T
tA B LET

1. The I/O cable is connected from PC to the support unit 4.
2. The I/O cable is connected from PC to the support unit 5.
3. The I/O cable is connected from PC to the support unit 3.
4. The I/O cable is connected from PC to the support unit 2.
5. The I/O cable is connected from PC to the support unit 6.

SPORTON International Inc. FCC ID : FSUGMPAD
TEL : 886-2-2696-2468 Page No. : 7 of 27
FAX : 886-2-2696-2255 Issued Date : Jun. 15, 1999

FCC TEST REPORT Report No. : F933103-2

3. Test Software
An executive program, EMITEST.EXE under WIN 98, which generates a complete line of continuously
repeating " H" pattern was used as the test software.

The program was executed as follows :
a. Turn on the power of all equipment.
b. The PC reads the test program from the floppy disk drive and runs it.
c. The PC sends " H" messages to the monitor, and the monitor displays " H" patterns on the screen.
d. The PC sends " H" messages to the printer, then the printer prints them on the paper.
e. The PC sends " H" messages to the modem.
f. The PC sends " H" messages to the internal Hard Disk, and the Hard Disk reads and writes the
message.
g. Repeat the steps from b to f.

At the same time, "WordPad" of Accessories under Win 98 was used as the test software.

SPORTON International Inc. FCC ID : FSUGMPAD
TEL : 886-2-2696-2468 Page No. : 8 of 27
FAX : 886-2-2696-2255 Issued Date : Jun. 15, 1999

FCC TEST REPORT Report No. : F933103-2

4. General Information of Test

4.1. Test Facility

This test was carried out by SPORTON International Inc. in an openarea test site.
Openarea Test Site Location : No. 30-2, Lin 6, Diing-Fwu Tsuen, Lin-Kou-Hsiang,
Taipei Hsien, Taiwan, R.O.C.
TEL : 886-2-2601-1640
FAX : 886-2-2601-1695

4.2. Standard for Methods of Measurement

ANSI C63.4-1992

4.3. Test in Compliance with

CISPR PUB. 22 Class B

4.4. Frequency Range Investigated

a. Conduction: from 150 kHz to 30 MHz
b. Radiation : from 30 MHz to 1,000 MHz

4.5. Test Distance

The test distance of radiated emission from antenna to EUT is 10 M.

SPORTON International Inc. FCC ID : FSUGMPAD
TEL : 886-2-2696-2468 Page No. : 9 of 27
FAX : 886-2-2696-2255 Issued Date : Jun. 15, 1999

FCC TEST REPORT Report No. : F933103-2

5. Test of Conducted Powerline

Conducted Emissions were measured from 150 kHz to 30 MHz with a bandwidth of 9 KHz on the 115 VAC
power and return leads of the EUT according to the methods defined in ANSI C63.4-1992 Section 3.1. The
EUT was placed on a nonmetallic stand in a shielded room 0.8 meters above the ground plane as shown in
section 5.3. The interface cables and equipment positioning were varied within limits of reasonable
applications to determine the position produced maximum conducted emissions.

5.1. Major Measuring Instruments

Test Receiver HP 8591EM
Attenuation 0 dB
Start Frequency 0.15 MHz
Stop Frequency 30 MHz
Step MHz 0.007 MHz
IF Bandwidth 9 kHz

SPORTON International Inc. FCC ID : FSUGMPAD
TEL : 886-2-2696-2468 Page No. : 10 of 27
FAX : 886-2-2696-2255 Issued Date : Jun. 15, 1999

FCC TEST REPORT Report No. : F933103-2

5.2. Test Procedures

a. The EUT was placed 0.4 meter from the conducting wall of the shielding room was kept at least 80
centimeters from any other grounded conducting surface.
b. Connect EUT to the power mains through a line impedance stabilization network (LISN).
c. All the support units are connect to the other LISN.
d. The LISN provides 50 ohm coupling impedance for the measuring instrument.
e. The FCC states that a 50 ohm, 50 microhenry LISN should be used.
f. Both sides of AC line were checked for maximum conducted interference.
g. The frequency range from 150 kHz to 30 MHz was searched.
h. Set the test-receiver system to Peak Detect Function and Specified Bandwidth with Maximum Hold
Mode.
i. If the emission level of the EUT in peak mode was 6 dB lower than the limit specified, then testing will
be stopped and peak values of EUT will be reported, otherwise, the emissions which do not have 6 dB
margin will be retested one by one using the quasi-peak method and reported.

SPORTON International Inc. FCC ID : FSUGMPAD
TEL : 886-2-2696-2468 Page No. : 11 of 27
FAX : 886-2-2696-2255 Issued Date : Jun. 15, 1999

FCC TEST REPORT Report No. : F933103-2

5.3. Typical Test Setup Layout of Conducted Powerline

10 cm

80 cm to the ground plane

L.I.S.N. L.I.S.N.

SPORTON International Inc. FCC ID : FSUGMPAD
TEL : 886-2-2696-2468 Page No. : 12 of 27
FAX : 886-2-2696-2255 Issued Date : Jun. 15, 1999

FCC TEST REPORT Report No. : F933103-2

5.4. Test Result of AC Powerline Conducted Emission

! Temperature : 25°C
! Relative Humidity : 50 %
! Test Date : Apr. 8, 1999

The Conducted Emission test was passed at minimum margin

LINE 0.546 MHz / 39.40 dBuV.

Freq. Line Meter Reading Limits Margin
or Q.P. A.V. Q.P. A.V. Q.P. A.V. Q.P. A.V. Q.P. A.V.
(MHz) Neutral (dBuV) (dBuV) (uV) (uV) (dBuV) (dBuV) (uV) (uV) (dB) (dB)

0.400 L 38.40 37.80 83.18 77.62 57.85 47.85 781.09 247.00 -19.45 -10.05
0.546 L 39.40 38.90 93.33 88.10 56.00 46.00 630.96 199.53 -16.60 -7.10
4.252 L 33.90 30.90 49.55 35.08 56.00 46.00 630.96 199.53 -22.10 -15.10
0.194 N 45.90 45.60 197.24 190.55 63.84 53.84 1556.35 492.16 -17.94 -8.24
0.689 N 38.50 37.50 84.14 74.99 56.00 46.00 630.96 199.53 -17.50 -8.50
1.562 N 32.80 29.50 43.65 29.85 56.00 46.00 630.96 199.53 -23.20 -16.50

Test Engineer : _______________
KENNY CHUANG

SPORTON International Inc. FCC ID : FSUGMPAD
TEL : 886-2-2696-2468 Page No. : 13 of 27
FAX : 886-2-2696-2255 Issued Date : Jun. 15, 1999

FCC TEST REPORT Report No. : F933103-2

6. Test of Radiated Emission

Radiated emissions from 30 MHz to 1,000 MHz were measured with a bandwidth of 120 kHz according to
the methods defines in ANSI C63.4-1992. The EUT was placed on a nonmetallic stand in the open-field
site, 0.8 meter above the ground plane, as shown in section 6.3. The interface cables and equipment
positions were varied within limits of reasonable applications to determine the positions producing maximum
radiated emissions.

6.1. Major Measuring Instruments

Amplifier (HP 8447D)
Attenuation 0 dB
RF Gain 25 dB
Signal Input 0.1 MHz to 1.3 GHz

Spectrum Analyzer (HP 8568B)
Attenuation 0 dB
Start Frequency 30 MHz
Stop Frequency 1,000 MHz
Resolution Bandwidth 1 MHz
Video Bandwidth 1 MHz
Signal Input 100 Hz to 1.5 GHz

Quasi-Peak Adapter (85650A)
Resolution Bandwidth 120 KHz
Frequency Band 30 MHz to 1 GHz
Quasi-Peak Detector ON for Quasi-Peak Mode
OFF for Peak Mode

SPORTON International Inc. FCC ID : FSUGMPAD
TEL : 886-2-2696-2468 Page No. : 16 of 27
FAX : 886-2-2696-2255 Issued Date : Jun. 15, 1999

FCC TEST REPORT Report No. : F933103-2

6.2. Test Procedures
a. The EUT was placed on a rotatable table top 0.8 meter above ground.
b. The EUT was set 10 meters from the interference receiving antenna which was mounted on the top of a
variable height antenna tower.
c. The table was rotated 360 degrees to determine the position of the highest radiation.
d. The antenna is a half wave dipole and its height is varied between one meter and four meters above
ground to find the maximum value of the field strength both horizontal polarization and vertical
polarization of the antenna are set to make the measurement.
e. For each suspected emission the EUT was arranged to its worst case and then tune the antenna tower
(from 1 M to 4 M) and turn table (from 0 degree to 360 degrees) to find the maximum reading.
f. Set the test-receiver system to Peak Detect Function and specified bandwidth with Maximum Hold
Mode.
g. If the emission level of the EUT in peak mode was 6 dB lower than the limit specified, then testing will be
stopped and peak values of EUT will be reported, otherwise, the emissions which do not have 6 dB
margin will be repeated one by one using the quasi-peak method and reported.

SPORTON International Inc. FCC ID : FSUGMPAD
TEL : 886-2-2696-2468 Page No. : 17 of 27
FAX : 886-2-2696-2255 Issued Date : Jun. 15, 1999

FCC TEST REPORT Report No. : F933103-2

6.3. Typical Test Setup Layout of Radiated Emission

FRP Room Antenna

Equipment under Test

# 10 M for FCC test

0.8 M
Ground Plane

Receiver
TurnTable

SPORTON International Inc. FCC ID : FSUGMPAD
TEL : 886-2-2696-2468 Page No. : 18 of 27
FAX : 886-2-2696-2255 Issued Date : Jun. 15, 1999

FCC TEST REPORT Report No. : F933103-2

6.4. Test Result of Radiated Emission

! Test Distance : 10 M
! Temperature : 24°C
! Relative Humidity : 51 %
! Test Date : Mar. 29, 1999
! Emission level (dBuV/m) = 20 log Emission level (uV/m)
! Corrected Reading : Antenna Factor + Cable Loss + Reading = Emission

The Radiated Emission test was passed at minimum margin

o
199.90 MHz / 24.50 dBuV (VERTICAL) Antenna Height 1.2 Meter, Turntable Degree 122 .

Frequency Antenna Cable Reading Limits Emission Level Margin

Polarity Factor Loss

( MHz ) (dB/m) ( dB ) ( dBuV ) (dBuV/m) (uV/m) (dBuV/m) (uV/m) ( dB )

200.10 H 8.80 1.40 12.20 30.00 32 22.40 13.18 -7.60

430.40 H 16.09 2.26 11.35 37.00 71 29.70 30.55 -7.30

33.10 V 16.82 0.80 3.39 30.00 32 21.01 11.23 -8.99

44.20 V 10.50 0.80 10.07 30.00 32 21.37 11.71 -8.63

55.20 V 6.70 0.80 14.18 30.00 32 21.68 12.13 -8.32

199.90 V 8.80 1.40 14.30 30.00 32 24.50 16.79 -5.50

Test Engineer : __________________
JONES JAN

SPORTON International Inc. FCC ID : FSUGMPAD
TEL : 886-2-2696-2468 Page No. : 19 of 27
FAX : 886-2-2696-2255 Issued Date : Jun. 15, 1999

FCC TEST REPORT Report No. : F933103-2

6.5. TEST RESULT OF FIELD STRENGTH EMISSION

" Equipment meets the technical specifications of 15.209
" Frequency Range of Test : from 230KHz to 30 MHz
" Test Distance : 3 M
" Temperature : 27$
" Relative Humidity : 55% RH
" Test Date :June 12, 2000
" Limits at 3 meters are calculated by following methed:
for the limit at 660Khz per 15.209 is 24000/660=36.3uV/m at 300m, To determine the level at the 3m test
distance take 20 log (36.3)=32.1dBuV/m and then per 15.31 (f)(2) a 40dB/decade correction factor may
be used below 30Mhz giving a 3m limit of 72.1dBuV/m.
" Emission level (dBuV/m)=20log emission level (uV/m)
" Sample Calculation at 0.345MHz
Corrected Reading = 0.4+ 53.1= 53.5(dBuV/m )
Remark: The R&S test receiver will automatically offset the antenna factor, therefore, the reading value
shown on the R&S test receiver is included receiving value added antenna factor.

Frequency $ Cable Reading Limits$ Emission Level Margin
Polarity Loss
( MHz ) $ ( dB ) ( dBuV ) ( dBuV/m ) ( uV/m ) ( dBuV/m ) ( uV/m ) ( dB )
0.345 H 0.40 53.10 56.85 696 53.50 473.15 -3.35
0.690 H 0.40 40.80 50.83 348 41.20 114.82 -9.63
1.035 H 0.50 35.50 47.31 232 36.00 63.10 -11.31
1.380 H - 0.00 44.81 174 0.00 1.00 -44.81
1.725 H 0.50 21.69 49.54 300 22.19 12.87 -27.35
11.059 H 0.60 22.59 49.54 300 23.19 14.44 -26.35
22.118 H 0.90 17.65 49.54 300 18.55 8.46 -30.99
0.345 V 0.40 43.20 56.85 696 43.60 151.36 -13.25
0.690 V 0.40 32.10 50.83 348 32.50 42.17 -18.33
1.035 V 0.50 25.70 47.31 232 26.20 20.42 -21.11
1.380 V - 0.00 44.81 174 0.00 1.00 -44.81
1.725 V 0.50 18.80 49.54 300 19.30 9.23 -30.24
11.059 V 0.60 31.20 49.54 300 31.80 38.90 -17.74
22.118 V 0.60 26.00 49.54 300 26.60 21.38 -22.94

SPORTON International Inc. FCC ID : FSUGMPAD
TEL : 886-2-2696-2468 Page No. : 20 of 27
FAX : 886-2-2696-2255 Issued Date : Jun. 15, 1999

FCC TEST REPORT Report No. : F933103-2

8. List of Measuring Equipments Used

Instrument Manufacturer Model No. Serial No. Characteristics Calibration Remark
Date
EMC Receiver (site HP 8591EM 3710A01187 9 KHz - 18 GHz Sep. 18, 1998 Conduction
2)

LISN (EUT) (site Telemeter NNB-2/16Z 98009 50 ohm / 50 uH Jan. 22, 1999 Conduction
2)

LISN (Support Unit) EMCO 3810/2NM 9703-1839 50 ohm / 50 uH Jul. 06, 1998 Conduction
(site 2)

Quasi-peak Adapter HP 85650A 2521A00821 9KHz -1 GHz Nov. 13, 1999 Radiation
(site 5)

Spectrum Analyzer HP 8568B 2634A03000 100Hz - 1.5GHz Nov. 13, 1999 Radiation
(Site 5)
Amplifier (Site 5) HP 8447D 2944A09073 0.1MHz -1.3GHz Nov. 13, 1999 Radiation

Loop Antenna R&S HFH2-Z2.335.4711.52 8600047001 9K~30MHz DEC. 20, 1999 Radiation

Bilog Antenna (Site 5) CHASE CBL6112A 2287 30MHz -2GHz Jan. 04, 2000 Radiation

Half-wave dipole EMCO 3121C 9705-1285 28 M - 1GHz May 17, 2000 Radiation
antenna (Site 5)

Turn Table (site 5) EMCO 2080 9711-2021 0 ∼ 360 degree N/A Radiation

Antenna Mast (site 5) EMCO 2075 9711-2115 1 m- 4 m N/A Radiation

SPORTON International Inc. FCC ID : FSUGMPAD
TEL : 886-2-2696-2468 Page No. : 23 of 27
FAX : 886-2-2696-2255 Issued Date : Jun. 15, 1999

Document Created: 2000-06-27 07:33:30
Document Modified: 2000-06-27 07:33:30

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC