Users Manual

FCC ID: FSUGK-100012K

Users Manual

Download: PDF
FCCID_2177069

GK-100012/T GK-100012/K GK-100012/R User’s manual

Hardware Installation
1. Install one AA battery into the keyboard and two AAA batteries
   into the mouse.
2. Plug in your USB receiver to a USB port of your PC.




ID Channel Setting and connection:
After you install the receiver:
Wait about 5-10 seconds and the connection will be executed and
the kit will be ready for use.

Replace Batteries
If the mouse or keyboard does not work properly, then the batteries
have lost their charge, so you need to replace them.
Warning: do not mix or use different types of batteries at the same
time.




                                   1


Keyboard hot key definition




            Turn down the volume.
            Turn up the volume.

Mouse Button Assignments
1. Left Button: Provides traditional mouse
   functions like click, double click and drag.
2. Magic-Roller: Scroll the button to surf the
   Internet and Windows documents.
3. Right Button: Provides traditional mouse
   click function


Notes on Battery Usage
When you use the battery, carefully read and strictly observe the
Safety Instructions and the notes described below:
  Different battery types and surrounding temperatures may affect
  the battery performance.
  Avoid using batteries in extremely cold environments as low
  temperatures can shorten the battery life and reduce wireless
  device performance.
  If you are using a new rechargeable battery or rechargeable
  battery that has not been used for an extended period of time

                                   2


(batteries that pass the expiry date are exceptions) it might affect
the period of time you can use this device. Therefore, to
maximize their performance and lifetime, we recommend that
you fully charge the batteries and discharge them for at least one
complete cycle before use.
The battery may feel warm when using the wireless device for an
extended period of time. This is normal and not a malfunction.
The wireless device may feel warm when being used
continuously or for an extended period of time. This is normal
and not a malfunction.
If you will not be using the batteries for an extended period of
time, remove them from the wireless device to prevent leakage or
corrosion.
Always keep the terminals in a clean state.
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.




                                 3


Federal Communications Commission (FCC) Notice:
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules .
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates , uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the
part responsible for compliance could void the user's authority to
operate the equipment.




                                    4


Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment

NOTE:THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.



Document Created: 2014-01-17 14:17:37
Document Modified: 2014-01-17 14:17:37

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC