UserMan a

FCC ID: FSUGG000I

Users Manual

Download: PDF
FCCID_1177727

                                                                                                                     ENGLISH

                                                 Wireless Trio Racer
                                                                                                      Hook C-Clamp to inner stopper
                                                                     Brake         Acceleration
                                                   Key2
      Key1
  Key3
                                                   Key4
    Key7
  Key5
Key9/Select                                          Key8
  Turbo Led                                          Key6
  Turbo Key                                        Key10/Start
                                                                          PS2
  Key11/Fn                                         DC 5V                                               AA Size Alkaline Battery
                                                  Power Switch
                                                                                       SWITCH
                                            Pedal Connector

                                                                                       PC/PS3
                                                                                       USB Port
                                                                     RX LED   Link Power LED
System Requirements:
  For PC                                                             For PlayStation
   IBM PC Pentium 166MHz compatibles or higher.                                
                                                                     PlayStation 2
   Microsoft Windows VISTA/XP/ME/2000/98                                       
                                                                     PlayStation 3
   CD/DVD-ROM Drive for driver installation.

Software Installation: Install the driver first before you install Wireless Trio Racer to the system. The Wheel will not support
the vibration function, if the driver is not installed.
1. Insert the driver CD into your CD-ROM; wait for a few seconds for your PC to load the disc; the auto run program is
     executed and the opening installation screen appears. Please follow the on-screen instructions.
2. If your system doesn’t launch the installation software automatically, you can locate the file in the directory of your CD drive
     and click on it, then follow the on-screen instruction to install the software.
Hardware Installation
1. Connect the USB Cable and plug it to an USB port on the PC/PlayStation3 or a USB Hub. Then, connect the Pedals to the
    main unit with the included cable. After connection, system will “Find a new hardware” and complete the installation.
2. Go to Game Controllers page and select “Advanced“. It should work as a wheel. Or a game pad with compatible electrical
    function design. Check the installation again if it is not correct.
Set wireless function:
Once you complete the Wireless Trio Racer installation, it will automatically search and link with the receiver. The green LED
on the steering wheel will be lit for five seconds then will turn off if you have a successful connection.
Link Mode                                         Wake suspend mode up            Suspend Mode             Low Battery Indicator
START/Key 10+Key11/Fn button at Wheel             START/Key 10 button or          After 2 minutes without  Green LED continues to
Connect button at Receiver Dongle                 SELECT/Key 9 button.            any button activity.     flash slowly.
Turbo Function:
1. Set/Clear Turbo Function: Press and hold the TURBO button, then press any action Key except buttons 9-10, or Brake
    Pedal to set the turbo function for it. Turbo LED will flash accordingly. To release the Turbo function, repeat the same
    procedures.
2. Set Turbo Speed: Press and hold the Turbo button, then press the Key_10/START button only. The Turbo speed will be
    adjusted cyclically from 2->4->8->16->2 Hz, each time the Key_10/START button is pressed.
Turbo Speed Setting Key Remapping Setting          PS3 Mode                 Select_Key     Start_Key    PS_Key
Turbo+ Key10/Start      Key_10/START + Turbo        Switch to PS Position       Key_9             Key_10      Key_Fn at PS mode
Active Direction Function for Game Setup Page:
1. Press Key9-Select button for two seconds, the Turbo LED will light to show the activation of “Direction function”.
    The following will act as each direction controlling: Button 5=UP; Button 6 = DOWN; Wheel Turn to right = RIGHT; Wheel
    Turn to left = LEFT.
2. Press Key9-Select two seconds again to release the Direction function. The Turbo LED will return to normal status.




                                                                 1


    FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
    This equipment has been tested and found to comply with the limits for a Class B digital
    device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
    reasonable protection against harmful interference in a residential installation. This
    equipment generates, uses and can radiate radio frequency energy and, if not installed
    and used in accordance with the instructions, may cause harmful interference to radio
    communications. However, there is no guarantee that interference will not occur in a
    particular installation. If this equipment does cause harmful interference to radio or
    television reception, which can be determined by turning the equipment off and on, the
    user is encouraged to try to correct the interference by one or more of the following
    measures:
    –   Reorient or relocate the receiving antenna.
    –   Increase the separation between the equipment and receiver.
    –   Connect the equipment into an outlet on a circuit different from that to which the
        receiver is connected.
    –   Consult the dealer or an experienced radio/TV technician for help.
    CAUTION:
    Any changes or modifications not expressly approved by the party responsible for
    compliance could void the user's authority to operate the equipment.


    This device complies with Part 15 of the FCC Rules. Operation is subject to the
    following two conditions:
    (1) This device may not cause harmful interference and
    (2) This device must accept any interference received, including interference that may
        cause undesired operation.
    
       RF exposure warning
        This equipment must be installed and operated in accordance with provided
        instructions and the antenna(s) used for this transmitter must be installed
        to provide a separation distance of at least 20 cm from all persons
        and must not be co-located or operating in conjunction with any
        other antenna or transmitter. End-users and installers must be provide
        with antenna installation instructions and transmitter operating conditions
        for satisfying RF exposure compliance.



Document Created: 2009-08-20 16:55:20
Document Modified: 2009-08-20 16:55:20

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC