TEST REPORT

FCC ID: FK3WR0712KB01

Test Report

Download: PDF
FCCID_1593019

SIIG, Inc. Model: JK-WR0712-S1 FCC PART 15.249 MEASUREMENT AND TEST REPORT FOR SIIG, Inc. 6078 Stewart Avenue, Fremont, CA 94538-3152, U.S.A. FCC ID: FK3WR0712KB01 Report Concerns: Equipment Type: Original Report 2.4GHz Wireless Multimedia Mini Keyboard Model: JK-WR0712-S1 Report No.: STR11118215I Test Date: 2011-11-21 to 2011-11-25 Issue Date: 2011-12-01 Tested By: Susan Su / Engineer Reviewed By: Lahm Peng / EMC Manager Approved & Authorized By: Jandy so / PSQ Manager Prepared By: SEM.Test Compliance Service Co., Ltd 3/F, Jinbao Commerce Building, Xin'an Fanshen Road, Bao'an District, Shenzhen, P.R.C.（518101） Tel.: +86-755-33663308 Fax.: +86-755-33663309 Website: www.semtest.com.cn Note: This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by SEM.Test Compliance Service Co., Ltd. REPORT NO.: STR11118215I PAGE 1 OF 19 FCC PART 15.249

SIIG, Inc. Model: JK-WR0712-S1 TABLE OF CONTENTS 1. GENERAL INFORMATION...................................................................................................................................3 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT)...............................................................................3 1.2 TEST STANDARDS...................................................................................................................................................3 1.3 TEST METHODOLOGY .............................................................................................................................................3 1.4 TEST FACILITY .......................................................................................................................................................4 1.5 EUT EXERCISE SOFTWARE ....................................................................................................................................4 1.6 ACCESSORIES EQUIPMENT LIST AND DETAILS .......................................................................................................4 1.7 EUT CABLE LIST AND DETAILS .............................................................................................................................4 2. SUMMARY OF TEST RESULTS ...........................................................................................................................5 3. §15.203 - ANTENNA REQUIREMENT..................................................................................................................6 3.1 STANDARD APPLICABLE.........................................................................................................................................6 3.2 TEST RESULT..........................................................................................................................................................6 4. §15.205, §15.209, §15.249 (A)- RADIATED EMISSION........................................................................................7 4.1 MEASUREMENT UNCERTAINTY ..............................................................................................................................7 4.2 STANDARD APPLICABLE.........................................................................................................................................7 4.3 TEST EQUIPMENT LIST AND DETAILS .....................................................................................................................7 4.4 TEST PROCEDURE ...................................................................................................................................................8 4.5 CORRECTED AMPLITUDE & MARGIN CALCULATION ..............................................................................................8 4.6 ENVIRONMENTAL CONDITIONS ..............................................................................................................................8 4.7 SUMMARY OF TEST RESULTS/PLOTS ......................................................................................................................9 5. §15.249(B) OUT OF BAND EMISSIONS .............................................................................................................17 5.1 STANDARD APPLICABLE.......................................................................................................................................17 5.2 TEST EQUIPMENT LIST AND DETAILS ...................................................................................................................17 5.3 TEST PROCEDURE .................................................................................................................................................17 5.4 ENVIRONMENTAL CONDITIONS ............................................................................................................................17 5.5 SUMMARY OF TEST RESULTS/PLOTS ....................................................................................................................17 REPORT NO.: STR11118215I PAGE 2 OF 19 FCC PART 15.249

SIIG, Inc. Model: JK-WR0712-S1 1. GENERAL INFORMATION 1.1 Product Description for Equipment Under Test (EUT) Client Information Applicant: SIIG, Inc. Address of applicant: 6078 Stewart Avenue, Fremont, CA 94538-3152, U.S.A. Manufacturer: SIIG, Inc. Address of manufacturer: 6078 Stewart Avenue, Fremont, CA 94538-3152, U.S.A. General Description of E.U.T Items Description EUT Description: 2.4GHz Wireless Multimedia Mini Keyboard Trade Name: SIIG Model No.: JK-WR0712-S1 Adding Model: FK3WKMJK114601 Rated Voltage: DC 1.5V Rated Current: 18mA Frequency Range: 2402-2480 MHz Antenna Type: Integral Antenna For more information refer to the circuit diagram form and the user’s manual. The test data is gathered from a production sample, provided by the manufacturer. 1.2 Test Standards The following report is prepared on behalf of the SIIG, Inc. in accordance with FCC Part 15, Subpart B, Subpart C, and section 15.203, 15.205, 15.209 and 15.249 of the Federal Communication Commissions rules. The objective is to determine compliance with FCC Part 15, Subpart C, and section15.203, 15.205, 15.209 and 15.249 of the Federal Communication Commissions rules. Maintenance of compliance is the responsibility of the manufacturer. Any modification of the product, which results in lowering the emission, should be checked to ensure compliance has been maintained. 1.3 Test Methodology All measurements contained in this report were conducted with ANSI C63.4-2003, American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the range of 9 kHz to 40 GHz. The equipment under test (EUT) was configured to measure its highest possible emission level. The test modes were adapted according to the Operating Instructions and let the EUT keep transmitting. REPORT NO.: STR11118215I PAGE 3 OF 19 FCC PART 15.249

SIIG, Inc. Model: JK-WR0712-S1 1.4 Test Facility • FCC – Registration No.: 994117 SEM.Test Compliance Services Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files and the Registration is 994117. • Industry Canada (IC) Registration No.: 7673A The 3m Semi-anechoic chamber of SEM.Test Compliance Services Co., Ltd. has been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 7673A. • CNAS Registration No.: L4062 Shenzhen SEM.Test Electronics Service Co., Ltd. is a testing organization accredited by China National Accreditation Service for Conformity Assessment (CNAS) according to ISO/IEC 17025. The accreditation certificate number is L4062. All measurement facilities used to collect the measurement data are located at 3/F, Jinbao Commerce Building, Xin’an Fanshen Road, Bao’an District, Shenzhen, P.R.C (518101) 1.5 EUT Exercise Software The EUT exercise program used during the testing was designed to exercise the system components. The test software is started while the whole system is on. 1.6 Accessories Equipment List and Details Description Manufacturer Model Serial Number / / / / 1.7 EUT Cable List and Details Cable Description Length (M) Shielded/Unshielded With Core/Without Core / / / / REPORT NO.: STR11118215I PAGE 4 OF 19 FCC PART 15.249

SIIG, Inc. Model: JK-WR0712-S1 2. SUMMARY OF TEST RESULTS FCC RULES DESCRIPTION OF TEST RESULT §15.203 Antenna Requirement Compliant §15.207 (a) Conducted Emission N/A §15.205 Restricted Band of Operation Compliant §15.209 Radiated Emission Compliant §15.249(a) Field Strength Compliant §15.249(d) Out of Band Emission Compliant REPORT NO.: STR11118215I PAGE 5 OF 19 FCC PART 15.249

SIIG, Inc. Model: JK-WR0712-S1 3. §15.203 - ANTENNA REQUIREMENT 3.1 Standard Applicable According to FCC 15.203, an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this section. 3.2 Test Result This product has an integral antenna, fulfill the requirement of this section. REPORT NO.: STR11118215I PAGE 6 OF 19 FCC PART 15.249

SIIG, Inc. Model: JK-WR0712-S1 4. §15.205, §15.209, §15.249 (a)- RADIATED EMISSION 4.1 Measurement Uncertainty Based on NIS 81, The Treatment of Uncertainty in EMC Measurements, the best estimate of the uncertainty of a radiation emissions measurement is +5.10 dB. 4.2 Standard Applicable According to §15.249(a), the field strength of emissions from intentional radiators operated within these frequency bands shall comply with the following: Fundamental Frequency Field strength of fundamental Field strength of fundamental (milli-volts/meter) (micro-volts/meter) 902-928 MHz 50 500 2400-2483.5 MHz 50 500 5725-5875 MHz 50 500 24.0-24.25 GHz 250 2500 (d) Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated emission limits in §15.209, whichever is the lesser attenuation. The emission limit in this paragraph is based on measurement instrumentation employing an average detector. The provisions in §15.35 for limiting peak emissions apply. Spurious Radiated Emissions measurements starting below or at the lowest crystal frequency. 4.3 Test Equipment List and Details Description Manufacturer Model Serial Number Cal. Date Due. Date Spectrum Analyzer R&S FSP 836079/035 2010-12-20 2011-12-19 EMI Test Receiver R&S ESVB 825471/005 2010-12-20 2011-12-19 Positioning C&C CC-C-1F N/A 2010-12-20 2011-12-19 Controller RF Switch EM EMSW18 SW060023 2010-12-20 2011-12-19 Pre-amplifier Agilent 8447F 3113A06717 2010-12-20 2011-12-19 Pre-amplifier Compliance Direction PAP-0118 24002 2010-12-20 2011-12-19 Trilog Broadband SCHWARZBECK VULB9163 9163-333 2011-01-09 2012-01-08 Antenna Horn Antenna ETS 3117 00086197 2011-01-09 2012-01-08 Loop Antenna SCHWARZECK HFRA 5165 9365 2011-01-09 2012-01-08 Statement of Traceability: All calibrations have been performed per the NVLAP requirements traceable to the NIST. REPORT NO.: STR11118215I PAGE 7 OF 19 FCC PART 15.249

SIIG, Inc. Model: JK-WR0712-S1 4.4 Test Procedure The setup of EUT is according with per ANSI C63.4-2003 measurement procedure. The specification used was with the FCC Part 15.205 15.249(a) and FCC Part 15.209 Limit. The external I/O cables were draped along the test table and formed a bundle 30 to 40 cm long in the middle. The spacing between the peripherals was 10 cm. Antenna Tower 1m-4m 3m EUT 0.8m Turntable Table To EMI Receiver Ground Plane 4.5 Corrected Amplitude & Margin Calculation The Corrected Amplitude is calculated by adding the Antenna Factor and the Cable Factor, and subtracting the Amplifier Gain from the Amplitude reading. The basic equation is as follows: Corr. Ampl. = Indicated Reading + Ant. Factor + Cable Loss – Ampl. Gain The “Margin” column of the following data tables indicates the degree of compliance with the applicable limit. For example, a margin of -6dBμV means the emission is 6dBμV below the maximum limit for Class B. The equation for margin calculation is as follows: Margin = Corr. Ampl. – FCC Part 15 Limit 4.6 Environmental Conditions Temperature: 24 °C Relative Humidity: 60 % ATM Pressure: 1012 mbar REPORT NO.: STR11118215I PAGE 8 OF 19 FCC PART 15.249

SIIG, Inc. Model: JK-WR0712-S1 4.7 Summary of Test Results/Plots According to the data below, the FCC Part 15.205, 15.209 and 15.249 standards, and had the worst margin of: -1.30 dBμV at 4804 MHz in the Vertical polarization Low CH, 9 kHz to 25 GHz, 3Meters Note: this EUT was tested in 3 orthogonal positions and the worst case position data was reported. Plot of Radiation Emissions Test Radiated Disturbance EUT: 2.4GHz Wireless Multimedia Mini Keyboard M/N: JW-WR0712-S1 Operating Condition: Transmitting Low channel (2402MHz) Test Specification: Horizontal & Vertical Horizontal: No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV/m) Factor(dB) (dBuV/m) (dBuV/m) (dB) ( º) (cm) 1 36.0007 21.50 6.84 28.34 40.00 -11.66 124 100 peak REPORT NO.: STR11118215I PAGE 9 OF 19 FCC PART 15.249

SIIG, Inc. Model: JK-WR0712-S1 Vertical: No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV/m) Factor(dB) (dBuV/m) (dBuV/m) (dB) ( º) (cm) 1 36.2541 20.82 6.83 27.65 40.00 -12.35 24 100 peak 2 714.1734 18.57 17.49 36.06 46.00 -9.94 81 100 peak REPORT NO.: STR11118215I PAGE 10 OF 19 FCC PART 15.249

SIIG, Inc. Model: JK-WR0712-S1 Radiated Disturbance EUT: 2.4GHz Wireless Multimedia Mini Keyboard M/N: JW-WR0712-S1 Operating Condition: Transmitting Middle channel (2441MHz) Test Specification: Horizontal & Vertical Horizontal No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV/m) Factor(dB) (dBuV/m) (dBuV/m) (dB) ( º) (cm) 1 36.0007 20.03 6.84 26.87 40.00 -13.13 16 100 peak 2 61.3463 19.65 7.00 26.65 40.00 -13.35 314 100 peak REPORT NO.: STR11118215I PAGE 11 OF 19 FCC PART 15.249

SIIG, Inc. Model: JK-WR0712-S1 Vertical No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV/m) Factor(dB) (dBuV/m) (dBuV/m) (dB) ( º) (cm) 1 36.0007 19.02 6.84 25.86 40.00 -14.14 11 100 peak 2 90.8554 19.09 7.25 26.34 43.50 -17.16 71 100 peak REPORT NO.: STR11118215I PAGE 12 OF 19 FCC PART 15.249

SIIG, Inc. Model: JK-WR0712-S1 Radiated Disturbance EUT: 2.4GHz Wireless Multimedia Mini Keyboard M/N: JW-WR0712-S1 Operating Condition: Transmitting High channel (2480MHz) Test Specification: Horizontal & Vertical Horizontal No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) ( º) (cm) 1 49.0145 16.37 7.75 24.12 40.00 -15.88 36 100 peak 2 558.7302 16.37 13.65 30.02 46.00 -15.98 99 100 peak REPORT NO.: STR11118215I PAGE 13 OF 19 FCC PART 15.249

SIIG, Inc. Model: JK-WR0712-S1 Vertical No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) ( º) (cm) 1 32.4059 17.66 6.62 24.28 40.00 -15.72 154 100 peak REPORT NO.: STR11118215I PAGE 14 OF 19 FCC PART 15.249

SIIG, Inc. Model: JK-WR0712-S1 Spurious Emission Above 1GHz Meter Antenna Correction Frequency Direction Polar Cable loss Amplifier Limit Margin Detector Reading Loss Amplitude MHz Degree H/V dB dB dBuV/m dB dBuV dB dBuV/m Low CH (2402MHz) 4804 AV 46.4 24 V 34.1 5.2 33 52.7 54 -1.3 4804 AV 44.1 341 H 34.1 5.2 33 50.4 54 -3.6 4804 PK 50.4 24 V 34.1 5.2 33 56.7 74 -17.3 4804 PK 46.9 341 H 34.1 5.2 33 53.2 74 -20.8 7206 AV 35.2 77 V 37.4 6.1 33.5 45.2 54 -8.8 7206 AV 33.5 267 H 37.4 6.1 33.5 43.5 54 -10.5 7206 PK 38.5 77 V 37.4 6.1 33.5 48.5 74 -25.5 7206 PK 36.4 267 H 37.4 6.1 33.5 46.4 74 -27.6 2402 AV 69.8 33 V 29.1 3.7 34.0 68.6 94 -25.4 2402 AV 70.7 34 H 29.1 3.7 34.0 69.5 94 -24.5 2402 PK 71.5 33 V 29.1 3.7 34.0 70.3 114 -43.7 2402 PK 73.4 34 H 29.1 3.7 34.0 72.2 114 -41.8 Middle CH (2441MHz) 4882 AV 45.3 90 V 34.1 5.2 33.0 51.6 54 -2.4 4882 AV 43.5 270 H 34.1 5.2 33.0 49.8 54 -4.2 4882 PK 48.4 90 V 34.1 5.2 33.0 54.7 74 -19.3 4882 PK 47.1 270 H 34.1 5.2 33.0 53.4 74 -20.6 7323 AV 33.5 270 V 37.4 6.1 33.5 43.5 54 -10.5 7323 AV 37.6 180 H 37.4 6.1 33.5 47.6 54 -6.4 7323 PK 36.8 270 V 37.4 6.1 33.5 46.8 74 -27.2 7323 PK 39.5 180 H 37.4 6.1 33.5 49.5 74 -24.5 2441 AV 66.9 45 V 29.1 3.7 34.0 65.7 94 -28.3 2441 AV 70.0 90 H 29.1 3.7 34.0 68.8 94 -25.2 2441 PK 69.8 45 V 29.1 3.7 34.0 68.6 114 -45.4 2441 PK 73.1 90 H 29.1 3.7 34.0 71.9 114 -42.1 High CH (2480MHz) 4960 AV 40.8 66 V 34.1 5.2 33.0 47.1 54 -6.9 4960 AV 43.3 135 H 34.1 5.2 33.0 49.6 54 -4.4 4960 PK 44.5 66 V 34.1 5.2 33.0 50.8 74 -23.2 4960 PK 45.4 135 H 34.1 5.2 33.0 51.7 74 -22.3 7440 AV 35.8 56 V 37.4 6.1 33.5 45.8 54 -8.2 7440 AV 36.2 60 H 37.4 6.1 33.5 46.2 54 -7.8 7440 PK 38.7 56 V 37.4 6.1 33.5 48.7 74 -25.3 7440 PK 38.8 60 H 37.4 6.1 33.5 48.8 74 -25.2 REPORT NO.: STR11118215I PAGE 15 OF 19 FCC PART 15.249

SIIG, Inc. Model: JK-WR0712-S1 2480 AV 68.0 266 V 29.1 3.7 34.0 66.8 94 -27.2 2480 AV 69.2 185 H 29.1 3.7 34.0 68.0 94 -26.0 2480 PK 69.2 266 V 29.1 3.7 34.0 68.0 114 -46.0 2480 PK 71.8 185 H 29.1 3.7 34.0 70.6 114 -43.4 Note: Testing is carried out with frequency rang 9kHz to the tenth harmonics, which above 5th Harmonics is close to the noise base even antenna close up to 1meter distance according the measurement of ANSI C63.4. The measurements greater than 20dB below the limit from 9kHz to 30MHz. REPORT NO.: STR11118215I PAGE 16 OF 19 FCC PART 15.249

SIIG, Inc. Model: JK-WR0712-S1 5. §15.249(b) OUT OF BAND EMISSIONS 5.1 Standard Applicable Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated emission limits in §15.209, whichever is the lesser attenuation. 5.2 Test Equipment List and Details Description Manufacturer Model Serial Number Cal. Date Due. Date Spectrum Analyzer R&S FSP 836079/035 2010-12-20 2011-12-19 EMI Test Receiver R&S ESVB 825471/005 2010-12-20 2011-12-19 Positioning C&C CC-C-1F N/A 2010-12-20 2011-12-19 Controller RF Switch EM EMSW18 SW060023 2010-12-20 2011-12-19 Pre-amplifier Agilent 8447F 3113A06717 2010-12-20 2011-12-19 Pre-amplifier Compliance Direction PAP-0118 24002 2010-12-20 2011-12-19 Trilog Broadband SCHWARZBECK VULB9163 9163-333 2011-01-09 2012-01-08 Antenna Horn Antenna ETS 3117 00086197 2011-01-09 2012-01-08 Statement of Traceability: All calibrations have been performed per the NVLAP requirements traceable to the NIST. 5.3 Test Procedure As the radiation test, set the Lowest and Highest Transmitting Channel, observed the outside band of 2400MHz to 2483.5MHz, than mark the higher-level emission for comparing with the FCC rules. 5.4 Environmental Conditions Temperature: 24 °C Relative Humidity: 60 % ATM Pressure: 1012 mbar 5.5 Summary of Test Results/Plots Frequency Limit Result MHz dBuv Low Edge <54 Pass High Edge <54 Pass The edge emissions are below the FCC 15.209 Limits. Please refer to the test plots below. REPORT NO.: STR11118215I PAGE 17 OF 19 FCC PART 15.249

SIIG, Inc. Model: JK-WR0712-S1 Lowest Bandedge No. Frequency Reading Correct Result Limit Margin Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) 1 2310.000 35.57 -7.51 28.06 54.00 -25.94 Ave Detector 2310.000 51.05 -7.51 43.54 74.00 -30.46 Peak Detector 2 2390.000 35.50 -7.34 28.16 54.00 -25.84 Ave Detector 2390.000 49.71 -7.34 42.37 74.00 -31.63 Peak Detector 3 2400.000 52.51 -7.31 45.20 54.00 -8.80 Ave Detector 2400.000 64.14 -7.31 56.33 74.00 -17.67 Peak Detector 4 2402.200 79.14 -7.31 71.83 / / Ave Detector REPORT NO.: STR11118215I PAGE 18 OF 19 FCC PART 15.249

SIIG, Inc. Model: JK-WR0712-S1 Highest Bandedge No. Frequency Reading Correct Result Limit Margin Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) 1 2483.500 37.93 -7.13 30.80 54.00 -23.20 Ave Detector 2483.500 46.35 -7.13 39.22 74.00 -34.78 Peak Detector \2 2500.000 35.56 -7.08 28.48 54.00 -25.52 Ave Detector 2500.000 46.50 -7.08 39.42 74.00 -34.58 Peak Detector ***** END OF REPORT ***** REPORT NO.: STR11118215I PAGE 19 OF 19 FCC PART 15.249


Document Created: 2011-12-01 16:32:40
Document Modified: 2011-12-01 16:32:40
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC