RF Exposure

FCC ID: FHO-ICC-A-1

RF Exposure Info

Download: PDF
FCCID_3432951

Test report No. 1707604STO-003, Ed. 2 Page 1 (4) STATEMENT ON EXPOSURE TO ELECTROMAGNETIC FIELDS EQUIPMENT Type of equipment: Zigbee radio module Type / Model: ICC-A-1 Manufacturer: IKEA of Sweden AB By request of: IKEA of Sweden AB STANDARD EN 62479 47 CFR §1.1310 RSS-102 Issue 5 Radiation Protection Standard for Maximum Exposure Levels to Radiofrequency fields – 3 kHz to 300 GHz AS/NZS 2772.1 CONDITIONS Operating frequency range is 2405-2480 MHz. Highest output power to antenna is +12.60 dBm. Antenna gain is -3.6 dBi. A test separation distance of 5 mm is used for handheld/portable applications. A test separation distance of 20 cm is used for mobile applications. Maximum (worst case) duty cycle is 22.4% This Statement of Compliance is for the exclusive use of Intertek's client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this Statement. Only the Client is authorized to permit copying or distribution of this Statement of Compliance. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek.

Test report No. 1707604STO-003, Ed. 2 Page 2 (4) CALCULATIONS EIRP: Conversion dBm to W: (ଵଶ.଺଴ௗ஻௠ /ଵ଴) Conducted: (ଽ.଴ௗ஻௠ /ଵ଴) EIRP: Time averaged maximum power: Conducted: EIRP: Power density S: ୛ ୈେ×୉୍ୖ୔ ଴.ଶଶସ×଴.଴଴଻ଽ 5 mm separation distance: ௠మ ସ×஠×ோమ ସ×஠×଴.଴଴ହమ ୛ ୈେ×୉୍ୖ୔ ଴.ଶଶସ×଴.଴଴଻ଽ 20 cm separation distance: ௠మ ସ×஠×ோమ ସ×஠×଴.ଶ଴మ This Statement of Compliance is for the exclusive use of Intertek's client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this Statement. Only the Client is authorized to permit copying or distribution of this Statement of Compliance. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek.

Test report No. 1707604STO-003, Ed. 2 Page 3 (4) LIMITS & EVALUATIONS: Standard Reference for limit Limit Unit Values Result EN 62479 EN 624791 40 mW 2.0 PASS KDB 447498 D012 7.5 NA 0.64 PASS CFR 47 §1.1310 CFR 47 §1.13103 10 W/m2 0.004 PASS RSS-102 issue 5 (2015)4 10 mW 5.0 PASS RSS-102 issue 5 (2015) RSS-102 issue 5 (2015)5 2700 mW 2.0 PASS Radiation Protection Radiation Protection Standard Standard for Maximum for Maximum Exposure Levels Exposure Levels to 10 W/m2 5.71 PASS to Radiofrequency fields – 3 Radiofrequency fields – kHz to 300 GHz6 3 kHz to 300 GHz AS/NZS 2772.1 AS/NZS 2772.27 20 mW 2.0 PASS 1. Table A.1: For general public and limbs exposure. 2. Section 4.3.1, 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz 3. (e) Table 1 – Limits for maximum permissible exposure. For frequency range 1500 – 100 000 MHz and general population/uncontrolled exposure the maximum allowed power density is 1 mW/cm 2 = 10 W/m2 4. Section 2.5.2: at or above 300 MHz and below 6 GHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 1.31 x 10-2 ƒ0.6834 W (adjusted for tune-up tolerance), where ƒ is in MHz This Statement of Compliance is for the exclusive use of Intertek's client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this Statement. Only the Client is authorized to permit copying or distribution of this Statement of Compliance. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek.

Test report No. 1707604STO-003, Ed. 2 Page 4 (4) 5. Section 2.5.1, Table 1: 4 mW at 2450 MHz. For limb-worn devices where the 10 gram value applies, the exemption limits for routine evaluation in Table 1 are multiplied by a factor of 2.5 6. Table 7: For general public and 2 GHz- 300 GHz the equivalent plane wave power flux density is: 10 7. Section 3.7.3: In some circumstances an RF exposure evaluation may not be required. This is the case with low-power devices whose nominal average RF radiated power does not exceed 20 mW and which do not produce exceptionally high instantaneous fields. Intertek Semko AB, Radio & EMC Date of issue: 2017-06-14 Issued by: Daniel Nilsson This Statement of Compliance is for the exclusive use of Intertek's client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this Statement. Only the Client is authorized to permit copying or distribution of this Statement of Compliance. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek.


Document Created: 2017-06-14 09:30:52
Document Modified: 2017-06-14 09:30:52
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC