Justification Letter

FCC ID: FHO-ICC-A-1

Cover Letter(s)

Download: PDF
FCCID_3432940

IKEA of Sweden AB RE FCC ID: FHO-ICC-A-1 To the certification reviewer: We are hereby applying for Limited l modular approval of the above-referenced FCC ID, based on compliance with all of the criteria as detailed below. Sincerely, _____________________________________ Printed name: Ulf Axelsson Title: Product Development Engineer Part 15 Unlicensed Single Modular Transmitter Approval Justification per 15.212 Requirement per 15.212 reference (i) The radio elements of the modular transmitter The module have a shield can. must have their own RF shielding. (ii) The modular transmitter must have buffered All data inputs have buffered inputs. modulation/data inputs (if such inputs are provided. (iii) The modular transmitter must have its own power supply regulation. The module will only be under two conditions; 1. With an external DCDC source at 3.25- 3.35V 2. Coin cell battery 1.65-3.1V (iv) The modular transmitter must comply with The module is incorporating a pcb antenna the antenna and transmission system as the only antenna option. requirements of §§ 15.203, 15.204(b) and 15.204(c). (v) The modular transmitter must be tested in a The module was tested standalone. stand-alone configuration, i.e., the module must not be inside another device during testing for compliance with Part 15 parameters. 1

IKEA of Sweden AB (vi) The modular transmitter must be equipped The FCC ID will be printed or labeled on with either a permanently affixed label or every product using the module. must be capable of electronically displaying its FCC identification number. If the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. (vii) The modular transmitter must comply with The module is compliant with all applicable any specific rules or operating requirements FCC rules. that ordinarily apply to a complete If the RF module is sold stand alone to any transmitter and the manufacturer must manufacturer outside IKEA business or to provide adequate instructions along with the end users, then a detailed instructions for module to explain any such requirements. A copy of these instructions must be included remaining compliance will be given in the in the application for equipment User Manual or equal. authorization. (viii) The modular transmitter must comply with any applicable RF exposure requirements in NO, its final configuration. The module complies with RF exposure requirement. As Portable Limb-Worm” device and a “Mobile Device” with a separation distance equal to or more than 20 cm between product and users body in normal operation. The Module must only be installed in portable limb-worn devices (not body worn) or in a mobile device with a separation distance equal to or more than 20 cm from user’s body under normal operations. The Module will always be installed in IKEA products, Controlled by IKEA. The Module documentation includes the above information. 2


Document Created: 2017-05-19 10:29:53
Document Modified: 2017-05-19 10:29:53
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC