RF Exposure (SAR Exemption)

FCC ID: F6OINBODYBAND2

RF Exposure Info

Download: PDF
FCCID_3234527

Page 1 of 6 Report No. : W16DR-D005 ELECTROMAGNETIC EMISSION COMPLIANCE REPORT FOR LOW-POWER, NON-LICENSED TRANSMITTER Test Report No. : W16DR-D005 AGR No. : A16NA-275 Applicant : InBody Co., Ltd. Address : InBody Bldg., 54, Nonhyeon-ro 2-gil, Gangnam-gu, Seoul, 135-960, Korea Manufacturer : InBody Co., Ltd. Address : 15, Heugam-gil, Ipjang-myeon, Seobuk-gu, Cheonan-si, Chungcheongnam-do, 31025, KOREA Type of Equipment : Body Composition Analyzer FCC ID. : F6OINBODYBAND2 Model Name : InBodyBAND2 Serial number : N/A Total page of Report : 6 pages (including this page) Date of Incoming : November 24, 2016 Date of issue : December 05, 2016 SUMMARY The equipment complies with the regulation; FCC PART 15 SUBPART C Section 15.247 This test report only contains the result of a single test of the sample supplied for the examination. It is not a generally valid assessment of the features of the respective products of the mass-production. Reviewed by: Approved by: Ki-Hong, Nam / Asst, Chief Engineer Keun-Young, Choi / Vice President ONETECH Corp. ONETECH Corp. It should not be reproduced except in full, without the written approval of ONETECH Corp. EMC-003 (Rev.2) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599)

oneETECH Ns Page 2 of 6 Report No.: W16DR—D005 CONTENTS PAGE 1. VERIFICATION OF COMPLIANCE 4 2. GENERAL INFORMATION 5 2.1 PRODUCT DESCRIPTION::. 2222000000000 00000000 n000 en e enn en en en en en en narenne en en en anenennennennenarennennennennenne en en nnnn ns nnennennennennenennennea 5 2.2 ALTERNATIVE TYPE(S)/MODEL(S); ALSO COVERED BY THIS TEST REPORT.................00.0000000000000000enemeenmenmenmensemnmenees 5 3. EUT MODIFICATIONS 5 4. MAXIMUM PERMISSIBLE EXPOSURE 6 4.1 RF EXPOSURE CALCULATION 12. 22.0. 0000000000000 00en0en0ennenne en en en narennr en en en en nnne en en narenne en en en en en en en en nnsnnennenneennennennenne 6 4.2 EUT DESCRIPTION:..2.22.000.00.00000000 00000 n0n0ennenn en en en en en en en en en narenne en en nnenennennennennennnennennnnenn en nnennennrenennnennenneennennennenne 6 4.3 TEST RESULT ... 22. 000000 e00ee0en0 en eneneenennrenrenenarenne en en en en en en en nneenne en en en anenennennennennnnennennnneannnennennennennsnnennenneenenennennenne 6 Tt should not be reproduced except in full, withoutthe written approval of ONETECH Corp. EMC—003 (Rev.2) ONETECH Corp.: 43—14, Jinsaegol—gil, Chowol—eup, Gwangiu—si, Gyeonggi—do, 12735, Korea (TEL: 82—31—799—9500, FAX: 82—31—799.9599)

Page 3 of 6 Report No. : W16DR-D005 Revision History Issued Report No. Issued Date Revisions Effect Section W16DR-D005 December 05, 2016 Initial Issue All It should not be reproduced except in full, without the written approval of ONETECH Corp. EMC-003 (Rev.2) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599)

Page 4 of 6 Report No. : W16DR-D005 1. VERIFICATION OF COMPLIANCE Applicant : InBody Co., Ltd. Address : InBody Bldg., 54, Nonhyeon-ro 2-gil, Gangnam-gu, Seoul, 135-960, Korea Contact Person : Kyung Keun, Kim / Manager Telephone No. : +82-2-2182-8968 FCC ID : F6OINBODYBAND2 Model Name : InBodyBAND2 Brand Name : Serial Number : N/A Date : December 05, 2016 EQUIPMENT CLASS DTS – DIGITAL TRNSMISSION SYSTEM E.U.T. DESCRIPTION Body Composition Analyzer THIS REPORT CONCERNS Original Grant MEASUREMENT PROCEDURES ANSI C63.10: 2013 TYPE OF EQUIPMENT TESTED Pre-Production KIND OF EQUIPMENT Certification AUTHORIZATION REQUESTED EQUIPMENT WILL BE OPERATED FCC PART 15 SUBPART C Section 15.247 UNDER FCC RULES PART(S) Modifications on the Equipment to Achieve None Compliance Final Test was Conducted On 3 m, Semi Anechoic Chamber -. The above equipment was tested by ONETECH Corp. for compliance with the requirement set forth in the FCC Rules and Regulations. This said equipment in the configuration described in this report, shows the maximum emission levels emanating from equipment are within the compliance requirements. It should not be reproduced except in full, without the written approval of ONETECH Corp. EMC-003 (Rev.2) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599)

Page 5 of 6 Report No. : W16DR-D005 2. GENERAL INFORMATION 2.1 Product Description The InBody Co., Ltd., Model InBodyBAND2 (referred to as the EUT in this report) is a Body Composition Analyzer. The product specification described herein was obtained from product data sheet or user’s manual. Device Type Body Composition Analyzer Temperature Range -15 °C ~ 60 °C Operating Frequency 2 402 MHz ~ 2 480 MHz RF Output Power 1.42 dBm Number of Channel 40 Channel Modulation Type GFSK Antenna Type Chip Antenna Marker: NORDIC SEMICONDUCTOR USED RF CHIP Model Name: nRF51822 Antenna Gain 1.99 dBi List of each Osc. or crystal 32.768 MHz, 16 MHz Freq.(Freq. >= 1 MHz) 2.2 Alternative type(s)/model(s); also covered by this test report. -. None 3. EUT MODIFICATIONS -. None It should not be reproduced except in full, without the written approval of ONETECH Corp. EMC-003 (Rev.2) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599)

oneETECH Ns Page 6 of 6 Report No.: W16DR—D005 4. MAXIMUM PERMISSIBLE EXPOSURE 4.1 RF Exposure Calculation According to the FCC rule §1.1310, the limit for General Population/Uncontrolled exposure is 1 mW/em? for the device operating 1 500 ~ 100 000 MHz. 4.2 EUT Description Kind of EUT Body Composition Analyzer C Wireless Microphone: 494.000 MHz ~ 501.000 MHz and 498.200 MHz ~ 505.200 MHz C WLAN: 2 412 MHz ~ 2 462 MHz Operating Frequency Band C WLAN: 5 180 MHz ~ 5 240 MHz C WLAN: 5 745 MHz ~ 5 825 MHz C Bluetooth: 2 402 MHz ~ 2 480 MHz M Bluetooth BLE: 2 402 MHz ~ 2 480 MHz MAX. RF OUTPUT POWER 1.42 dBm Antenna Gain 1.99 dBi C MPE Exposure C SAR Evaluation Applied M N/A 4.3 Test Result According to the procedure, KDB 447498 DO1, the standalone SAR test exclusion threshold is [(Max. Powerof channel, including tune—up tolerance, mW)/(Mim. test separation distance, mm)] X [\ f(GHz)] < 3 =(1.58/5) X / 2402 =0.49 Conclusion: The SAR test exclusion threshold is less than 3, so the device meets the RF Exposure Requirement and excluded SAR Test. Target Power Max tune up Max tune up Separation Frequency W/itolerance power power distance RF exposure (MHz) (dBm) (dBm) (mW) (nam) BLE 2402 1.0 £1.0 2.0 1.58 5 0.49 (GESEK) Tt should not be reproduced except in full, withoutthe written approval of ONETECH Corp. EMC—003 (Rev.2) ONETECH Corp.: 43—14, Jinsaegol—gil, Chowol—eup, Gwangiu—si, Gyeonggi—do, 12735, Korea (TEL: 82—31—799—9500, FAX: 82—31—799.9599)


Document Created: 2016-12-16 19:06:30
Document Modified: 2016-12-16 19:06:30
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC