MPE Calculation

FCC ID: F53193G4000W

RF Exposure Info

Download: PDF
FCCID_4293669

                                                                  MPE CALCULATION
                                                               FCC ID: F53193G4000W


 RF Exposure Requirements:                                                               47 CFR §1.1307(b)
 RF Radiation Exposure Limits:                                                           47 CFR §1.1310
 RF Radiation Exposure Guidelines:                                                       FCC OST/OET Bulletin Number 65

 EUT Frequency Band:                                                                     824-849MHz, 1710-1755MHz, 1850-1910MHz
 Limits for General Population/Uncontrolled Exposure in the band of:                     300-1500MHz, 1500-100,000 MHz
 Power Density Limit:                                                                    f/1500; 1 mW / cm2


 Equation:             S = PG / 4πR2 or R = √PG / 4πS
            Where,     S = Power Density
                       P = Power Input to Antenna
                       G = Antenna Gain
                       R = distance to the center of radiated antenna
 ______________________________________________________________________________________________________________________
 EUT: Cellular Alarm Communicator, Model No.: 3G4000W
 Dipole Antenna

 Prediction distance 35cm
 GSM850: Power = 33.00 dBm, Antenna Gain = 2.5 dBi, Power density = 0.395 mW/cm2
 GSM1900: Power = 29.90 dBm, Antenna Gain = 6.2 dBi, Power density = 0.454 mW/cm2
 WCDMA Band II: Power=26.39 dBm, Antenna Gain = 6.2 dBi, Power density = 0.202 mW/cm2
 WCDMA Band V: Power=26.63 dBm, Antenna Gain = 2.5 dBi, Power density = 0.091 mW/cm2


                CH      Conducted      Antenna                                 Tolerance                       Calculated     MPE
                                                    Directional     Tune-Up    Max Power       Measurement
               Freq       Power         Gain                                                                      MPE         Limit    Pass/
  Type                                              Gain (dBi)     Tolerance     (dBm)         Distance (cm)
              (MHz)       (dBm)         (dBi)                                                                  (mW/cm2)     (mW/cm2)    Fail
 GSM/
              824.2        33.00           2.5          2.5             ±1dB     34.00              30           0.395       0.549     Pass
GPRS850
  GSM/
              1850.2       29.90           6.2          6.2             ±1dB     30.90              30           0.454         1       Pass
GPRS1900
WCDMA
              1852.4       26.39           6.2          6.2             ±1dB     27.39              30           0.202         1       Pass
(Band II)
WCDMA
              824.6        26.63           2.5          2.5             ±1dB     27.63              30           0.091       0.549     Pass
(Band V)



 The Above Result had shown that the device complied with MPE requirement at a prediction distance of 30cm.


 Completed By: Deon Dai
 SIEMIC, Inc
 775 Montague Expressway, Milpitas, CA 95035
 Phone: (408) 526-1188
 Date: 05/16/2019



Document Created: 2019-05-24 14:07:05
Document Modified: 2019-05-24 14:07:05

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC