User Manual

FCC ID: EOA-WP

Users Manual

Download: PDF
FCCID_1335752

p r o g r a m m e r Installation Instructions

TABLE OF CONTENTS Description.......................................................................................2 Installation........................................................................................2 Operation.........................................................................................3 Safety Precautions...........................................................................4 Regulatory & Service Information..................................................5 Important Safety and Usage Information......................................6 1

This document contains instructions for connecting SurfLink 3. Insert the rectangular end of the USB cable into an open USB Programmer into your laptop or desktop PC via a USB connection. port on your PC. SurfLink Programmer requires that Inspire® 2011 fitting software or higher is installed. 4. Follow the on-screen prompts in the “Add New Hardware. Wizard” screens. SurfLink Programmer is designed to be “plug and play” and does not require a CD or a restart of . DESCRIPTIOn the PC. SurfLink Programmer is a USB hearing aid programmer functioning 5. Locate SurfLink Programmer at least 5 feet/1.5 meters from as the interface between wireless hearing aids and computer fitting the patient. software. It consists of a USB cable and SurfLink Programmer. Physical and Performance Characteristics: OPERATION • Indicator lights for power and data transfer activity Once installed, SurfLink Programmer is ready to use. • SurfLink Programmer to PC connection on USB is capable of up . to 480 Mbps (USB 2.0 high speed) To use: 1. Verify SurfLink Programmer is connected to the PC Installation 2. Launch Inspire 2011 Screen may vary depending on the Windows version. 3. Search for SurfLink Programmer, if needed 1. Confirm that Inspire 2011 or higher is installed. (SurfLink Programmer is not supported on earlier versions of Inspire fitting software.) 2. Plug the square end of the USB cable into the back of SurfLink Programmer making sure it is inserted fully. 2 3

Safety Precautions Regulatory and Service Information Please read the following safety precautions before using SurfLink Classification Programmer for the first time. • Classification to the Medical Device Directive: Class I. • Classification to EN 60950-1 Class II Continuous Operation. Markings and Symbols • Any associated computer used with SurfLink Programmer must The following markings and symbols are used in these safety be an EN 60950 (ISO 950) approved computer. precautions and/or on the device label. Power Supply Within Europe, dispose of SurfLink Programmer according • Operating Voltage: 5.0 vDC supplied from the USB port of an to local EU WEEE regulations. EN 60950 (ISO 950) approved computer. Class II equipment Power from USB port Data transfer indicator 4 5

IMPORTANT SAFETY AND USAGE INFORMATION DO NOT continue to use a damaged SurfLink Programmer. . Storage and Shipping Conditions: DO NOT place heavy objects on top of SurfLink Programmer. • Temperature: -20 to 70° C, -4 to 158° F • Humidity: 30 – 90% Never insert foreign objects into the connections. • No condensation Avoid spilling liquid on SurfLink Programmer. Operating Conditions: • Temperature: 15 - 35° C, 59 - 95° F The exterior of SurfLink Programmer may be wiped with a damp • Humidity: 30 – 90% cloth or sterile hand wipe. Never use paint thinner, benzene, • No condensation cosmetics, or other volatile agents to clean the exterior of SurfLink Programmer. Avoid using SurfLink Programmer in areas subject to the following conditions: Never try to take apart or modify SurfLink Programmer. Doing so • Extreme heat or cold creates the danger of fire and electrical shock, as well as SurfLink • Static electricity Programmer malfunction. There are no user-serviceable parts • Large amounts of dust inside SurfLink Programmer. All services must be performed by the • Rough handling authorized dealer. Rough handling or dropping SurfLink Programmer can Please be aware that portable and mobile RF communications cause damage. If you think you may have damaged SurfLink equipment can affect medical electrical equipment. Programmer, or if SurfLink Programmer is suffering an obvious malfunction, immediately unplug it from your computer and Caution: SurfLink Programmer should not be used adjacent to contact your authorized dealer to request servicing. or stacked with other equipment. If stacked or adjacent use is necessary, check to make sure SurfLink Programmer is operating normally. 6 7

Regulatory Notices to radio communications. However, there is no guarantee FCC ID: EOA-WP that interference will not occur in a particular installation. If IC: 6903A-WP this equipment does cause harmful interference to radio or television reception, which can be determined by turning the FCC Notice equipment off and on, the user is encouraged to try to correct This device complies with part 15 of the FCC rules and with . the interference by one or more of the following RSS-210. Operation is subject to the following two conditions: . measures: (1) This device may not cause harmful interference, and . • Reorient or relocate the receiving antenna. (2) this device must accept any interference received, . including interference that may cause undesired operation . • Increase the separation between the equipment . of the device. and receiver. • Connect the equipment into an outlet on a circuit different . Note: The manufacturer is not responsible for any radio or from that to which the receiver is connected. TV interference caused by unauthorized modifications to this • Consult the dealer or an experienced radio/TV technician . equipment. Such modifications could void the user’s authority . to operate the equipment. for help Hereby, Paradigm declares that SurfLink Programmer is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be obtained from the below addresses. . This Class B digital apparatus complies with Canadian ICES-003. Paradigm, Inc. Note: This equipment has been tested and found to comply 6700 Washington Ave. South with the limits for a Class B digital device, pursuant to part Eden Prairie, MN USA 15 of the FCC Rules. These limits are designed to provide EC REP reasonable protection against harmful interference in a Paradigm, Inc. European Headquarters residential installation. This equipment generates, uses and can Wm. F. Austin House, Bramhall Technology Park radiate radio frequency energy and, if not installed and used in Pepper Road, Hazel Grove, Stockport SK7 5BX accordance with the instructions, may cause harmful interference United Kingdom 8

Waste from electronic equipment must be handled according to local regulations. 0673 © 2010 Paradigm, Inc. All Rights Reserved. BKLT0209-00-EE-XX Rev. A 84603-007 8/10 0086


Document Created: 2010-08-30 13:27:28
Document Modified: 2010-08-30 13:27:28
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC