User Manual

FCC ID: EOA-TVG722

Users Manual

Download: PDF
FCCID_2683394

MEDIA

Volume Control Streaming Activation Power Control Read This First SurfLink Media Controls Overview SurfLink Media can be connected to most media sources, including televisions, radios, Back View and MP3 players. This guide provides easy step-by-step instructions for connecting and using SurfLink Media. SurfLink Media must be powered on and connected to the desired media input before your hearing instruments can receive a signal. Only ONE of the following connection setups needs to be followed to begin the use of SurfLink Media. A variety of cables are included in this package to allow streaming from virtually any media Microphone RCA Jacks Optical S/PDIF Monaural/Binaural Power source. Select the appropriate cable for your connection and store any unused cables. TOSLINK Selection Package Contents Microphone (1) S/PDIF Jack (4) • SurfLink Media An S/PDIF digital audio cable is not RCA Jacks (2) • Power Adaptor supplied. S/PDIF digital audio cables are An RCA audio cable is supplied. • RCA Cable available at most consumer electronic stores. Optical TOSLINK Jack (3) A TOSLINK cable is not supplied. Power (5) TOSLINK cables are available at A micro-USB power cable is supplied. most consumer electronic stores. Insert the micro-USB connector into the Power port on SurfLink Media and connect the opposite end to the power outlet. 2 3

Connecting SurfLink Media and Media Source Connecting SurfLink Media and Media Source Volume Control Streaming Activation Power Volume Control Streaming Activation Power Control Control RCA Cable Installation (most common connection option) S/PDIF Installation 1. Connect the red and white RCA cable plugs into the corresponding 1. Connect the orange S/PDIF cable into the orange S/PDIF “AUDIO OUT” port (labeled 4) red and white RCA jacks (labeled 2) on SurfLink Media. on the media source. 2. Select the signal type as Monaural or Binaural audio 2. Select the signal type as Monaural or Binaural audio stream based on your hearing system configuration. stream based on your hearing system configuration. Monaural if you are wearing one hearing Microphone instrument. RCA Jacks Optical S/PDIF Monaural/Binaural Power Monaural if you are wearing one hearingMicrophone instrument. RCA Jacks Optical S/PDIF Monaural/Binaural Power TOSLINK SLINK Selection TOSLINK SLINK Selection Binaural if you are wearing two hearing instruments. Binaural if you are wearing two hearing instruments. 3. Connect the opposite end of the red and 3. Connect the opposite end of the orange white RCA cable jacks into the corresponding S/PDIF cable into the orange S/PDIF port red and white RCA “AUDIO OUT” jacks on on the back of SurfLink Media. the media source. 4. Place SurfLink Media in a desired location 4. Place SurfLink Media in a desired location that is in close proximity to the media that is in close proximity to the media source. source. Once SurfLink Media has been turned on it will begin to stream the audio signal. Once SurfLink Media has been turned on it will begin to stream the audio signal. 4 5

Connecting SurfLink Media and Media Source Connecting SurfLink Media and Media Source Volume Control Streaming Activation Power Control Optical/TOSLINK Installation External Microphone Installation 1. Connect the optical/TOSLINK cable into the optical/TOSLINK In the instance your television does not support the cable installation options listed “AUDIO OUT” port (labeled 3) on the media source. on the previous pages, an external microphone can be used. 2. Select the signal type as Monaural or Binaural audio 1. Connect the microphone cable into the microphone stream based on your hearing system configuration. port (labeled 1) on the back of SurfLink Media. Monaural if you are wearing one hearing instrument. Microphone RCA Jacks Optical S/PDIF Monaural/Binaural Power 2. Select the signal type Volume as Monaural Control or Binaural Streaming Activation audioPower Binaural if you are wearing two hearing instruments. TOSLINK SLINK Selection Control stream based on your hearing system configuration. 3. Connect the opposite end of the optical/ Monaural if you are wearing one hearing instrument. TOSLINK cable into the optical/TOSLINK Binaural if you are wearing two hearing instruments. port on the back of SurfLink Media. 3. Place the microphone as close as 4. Place SurfLink Media in a desired possible to the speaker(s) of the Television with External location that is in close proximity to desired media source. Microphone Configuration the media source. Microphone RCA Jacks Optical S/PDIF Monaural/Binaural Power Once SurfLink Media has been turnedTOSLINK on SLINK Selection on Once SurfLink Media has been turned on it will begin to stream the audio signal. it will begin to stream the audio signal. 6 7

Turning On SurfLink Media SurfLink Media Controls Overview ontrol 1. PlugActivation Streaming the power adaptor into the wall socket or other power source. Power Control 2. Connect the power cord using the Power port (labeled 5) on the back of SurfLink Media. 3. Press the power button on the front of SurfLink Media. The power button glows blue when the device is on. Front View ne RCA Jacks Optical S/PDIF Monaural/Binaural Power Volume Control Streaming Activation Power TOSLINK SLINK Selection Control Volume Control Streaming Activation Power Control Microphone RCA Jacks Optical S/PDIF Monaural/Binaural Power TOSLINK Selection 8 9

SurfLink Media Controls Overview Regulatory Notices FCC ID: EOA-TVG722 Volume Control IC: 6903A-TVG722 Model: 210 The volume of the media source streaming to your hearing instruments can be adjusted by FCC/IC Notice Paradigm, Inc. using the Volume Control. Slide your finger to the right to increase the volume and to the left to This device complies with part 15 of the FCC rules and with Industry Canada licence-exempt RSS 6600 Washington Ave. South standards. Operation is subject to the following two conditions: (1) This device may not cause harmful Eden Prairie, MN USA decrease the volume. The blue light indicates the volume control position of SurfLink Media. A interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. longer bar means increased volume. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the Paradigm, Inc. equipment. European Headquarters Streaming Activation Control Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio Wm. F. Austin House, Bramhall Technology Park Pepper Road, Hazel Grove, Stockport SK7 5BX exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'appareil doit accepter tout brouillage radioélectrique subi, même si United Kingdom The streaming activation range of the SurfLink Media can be increased or decreased to adjust the le brouillage est susceptible d'en compromettre le fonctionnement. distance where a streaming session begins. Slide your finger to the right to increase the distance Hereby, Paradigm declares that SurfLink Media is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be between the location of the SurfLink Media and where you want to be able to start streaming. The obtained from the following addresses. This Class B digital apparatus complies with Canadian ICES-003. blue light indicates the range position of SurfLink Media. A longer bar means increased distance. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. 10 11



Document Created: 2015-06-22 13:59:43
Document Modified: 2015-06-22 13:59:43
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC