Antenna info

FCC ID: EOA-TVG722

Operational Description

Download: PDF
FCCID_2683381

6600 Washington Avenue Eden Prairie, MN 55344 Date: ͛.6.201͙ Antenna Info This file must contain the following information: a) Describe compliance of the device with the antenna requirements of paragraph 15.203 of the FCC rules and Industry Canada RSS-Gen, Issue 4. The SurfLink Media i• in compliance as the antenna is not detachable or replaceable, it is an integral part of the Printed Circuit Board Assembly itself. b) A list of antennas to be used with the transmitter. Include manufacturer, model number, gain (dBi), description (e.g. dipole, yagi, etc.), and impedance. Only one, the half wave dipole antenna that is an integral part of the Printed Circuit Board itself, +2dBi of gain, antenna impedance is 50 ohms. c) Drawing or photograph unless clear photos appear in the external photos exhibit Picture with explanation is on the next page. Starkey Laboratories 1

Radio IC shown inside orange box; RF signal path shown with red arrows; Antenna inside red boxes. Starkey Laboratories 2


Document Created: 2015-07-06 12:54:01
Document Modified: 2015-07-06 12:54:01
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC