Antenna Info

FCC ID: EOA-24LIVIORCHG

Operational Description

Download: PDF
FCCID_4152635

Livio Antenna Description The Bluetooth 2.4 GHz antenna is a bow tie. The antenna is constructed on a polyimide flexible circuit. The flexible circuit uses 1 ounce copper (1.4 mil). The peak gain of the antenna in the assembled DUT is -11.75 dBi.

Right side Left side Bottom view Figure 1 2.4 GHz Antenna

The 10.281 MHz NFMI antenna is a coil wrapped on a ferrite core Figure 2 NFMI Antenna The NFMI antenna coil is a cylinder of nominal radius 1.125 mm and length 4.2 mm. There are 21 turns going down the coil, and 3 turns coming back, which are needed because the wire feed is only along one end of the coil.


Document Created: 2018-12-10 14:05:27
Document Modified: 2018-12-10 14:05:27
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC