RF Exposure

FCC ID: EOA-24LIVIOB13

RF Exposure Info

Download: PDF
FCCID_3963064

Starkey Laboratories, Inc. BTE 13 FCC 2.1093:2018 Bluetooth Low Energy Radio Report # STAK0123.5 NVLAP Lab Code: 200630 This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government of the United States of America. This Report shall not be reproduced, except in full without written approval of the laboratory. EAR-Controlled Data - This document contains technical data whose export and reexport/retransfer is subject to control by the U.S. Department of Commerce under the Export Administration Act and the Export Administration Regulations. The Department of Commerce’s prior written approval may be required for the export or re- export/retransfer of such technical data to any foreign person, foreign entity or foreign organization whether in the United States or abroad. More: https://www.bis.doc.gov/index.php/forms-documents/regulations-docs/14-commerce-country-chart/fileT

CERTIFICATE OF EVALUATION 2017-1-25 Last Date of Evaluation: Monday, July 23, 2018 Starkey Laboratories, Inc. Model: BTE 13 RF Exposure Evaluation Standards Specification Method FCC 2.1093:2018 FCC 447498 D01 General RF Exposure Guidance v06 Results Method Description Applied Results Comments Clause 4.3.1 SAR Test Exclusion Yes Pass Deviations From Evaluation Standards None Approved By: Donald Facteau, Process Architect This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government of the United States of America. Product compliance is the responsibility of the client, therefore the evaluation and equipment modes of operation represented in this report were agreed upon by the client, prior to evaluating. This Report may only be duplicated in its entirety. The results of this evaluation pertain only to the sample(s) evaluated. The specific description is noted in each of the individual sections of the evaluation report supporting this certificate of evaluation. This report reflects only those evaluations from the referenced standards shown in the certificate of evaluation. It does not include inspection or verification of labels, identification, marking or user information. Report No. STAK0123.5 EAR-Controlled Data 2/9

RF Exposure Condition 2017-1-25 The following RF Exposure conditions were used for the assessment documented in this report: Intended Use Portable Location on Body (if applicable) Head/Torso How is the Device Used Wireless hearing aid with Bluetooth Low Energy radio Radios Contained in the Same Host Device None Simultaneous Transmitting Radios None Body Worn Accessories N/A Environment General Population/Uncontrolled Exposure Report No. STAK0123.5 EAR-Controlled Data 3/9

REVISION HISTORY 2018.07.17 Revision Description Date Page Number Number 00 None Report No. STAK0123.5 EAR-Controlled Data 4/9

ACCREDITATIONS AND AUTHORIZATIONS 2018.07.17 United States FCC - Designated by the FCC as a Telecommunications Certification Body (TCB). Certification chambers, Open Area Test Sites, and conducted measurement facilities are listed with the FCC. A2LA - Accredited by A2LA to ISO / IEC 17065 as a product certifier. This allows Element to certify transmitters to FCC and IC specifications. NVLAP - Each laboratory is accredited by NVLAP to ISO 17025 Canada ISED - Recognized by Innovation, Science and Economic Development Canada as a Certification Body (CB). Certification chambers and Open Area Test Sites are filed with ISED. European Union European Commission – Within Element, we have a EU Notified Body validated for the EMCD and RED Directives. Australia/New Zealand ACMA - Recognized by ACMA as a CAB for the acceptance of test data. Korea MSIT / RRA - Recognized by KCC’s RRA as a CAB for the acceptance of test data. Japan VCCI - Associate Member of the VCCI. Conducted and radiated measurement facilities are registered. Taiwan BSMI – Recognized by BSMI as a CAB for the acceptance of test data. NCC - Recognized by NCC as a CAB for the acceptance of test data. Singapore IDA – Recognized by IDA as a CAB for the acceptance of test data. Israel MOC – Recognized by MOC as a CAB for the acceptance of test data. Hong Kong OFCA – Recognized by OFCA as a CAB for the acceptance of test data. Vietnam MIC – Recognized by MIC as a CAB for the acceptance of test data. SCOPE For details on the Scopes of our Accreditations, please visit: http://portlandcustomer.element.com/ts/scope/scope.htm http://gsi.nist.gov/global/docs/cabs/designations.html Report No. STAK0123.5 EAR-Controlled Data 5/9

FACILITIES 2018.07.17 California Minnesota New York Oregon Texas Washington Labs OC01-17 Labs MN01-10 Labs NY01-04 Labs EV01-12 Labs TX01-09 Labs NC01-05 41 Tesla 9349 W Broadway Ave. 4939 Jordan Rd. 6775 NE Evergreen Pkwy #400 3801 E Plano Pkwy 19201 120th Ave NE Irvine, CA 92618 Brooklyn Park, MN 55445 Elbridge, NY 13060 Hillsboro, OR 97124 Plano, TX 75074 Bothell, WA 98011 (949) 861-8918 (612)-638-5136 (315) 554-8214 (503) 844-4066 (469) 304-5255 (425)984-6600 NVLAP NVLAP Lab Code: 200676-0 NVLAP Lab Code: 200881-0 NVLAP Lab Code: 200761-0 NVLAP Lab Code: 200630-0 NVLAP Lab Code:201049-0 NVLAP Lab Code: 200629-0 Innovation, Science and Economic Development Canada 2834B-1, 2834B-3 2834E-1, 2834E-3 N/A 2834D-1, 2834D-2 2834G-1 2834F-1 BSMI SL2-IN-E-1154R SL2-IN-E-1152R N/A SL2-IN-E-1017 SL2-IN-E-1158R SL2-IN-E-1153R VCCI A-0029 A-0109 N/A A-0108 A-0201 A-0110 Recognized Phase I CAB for ACMA, BSMI, IDA, KCC/RRA, MIC, MOC, NCC, OFCA US0158 US0175 N/A US0017 US0191 US0157 Report No. STAK0123.5 EAR-Controlled Data 6/9

PRODUCT DESCRIPTION 2017-1-25 Client and Equipment Under Evaluation Information Company Name: Starkey Laboratories, Inc. Address: 6600 Washington Ave. SO. City, State, Zip: Eden Prairie, MN 55344 Evaluation Requested By: Bill Mitchell Model: BTE 13 Date of Evaluation: Monday, July 23, 2018 Information Provided by the Party Requesting the Evaluation Functional Description of the Equipment: Bluetooth Low Energy radio with 1 antenna type and 1 antenna port Objective: To demonstrate compliance with FCC RF exposure requirements for 2.1093 portable devices. Report No. STAK0123.5 EAR-Controlled Data 7/9

SAR TEST EXCLUSION EXRPT.2017.10.02 OVERVIEW Human exposure to RF emissions from portable devices (47 CFR §2.1093) used with the radiating antenna closer than 20 cm to the user requires Specific Absorption Rate (SAR) to evaluate the environmental impact of human exposure to radiofrequency (RF) radiation. COMPLIANCE WITH FCC 2.1093 “Portable devices that operate in the Cellular Radiotelephone Service pursuant to part 22 of this chapter; the Personal Communications Service (PCS) pursuant to part 24 of this chapter; the Satellite Communications Services pursuant to part 25 of this chapter; the Miscellaneous Wireless Communications Services pursuant to part 27 of this chapter; the Maritime Services (ship earth station devices only) pursuant to part 80 of this chapter; the Specialized Mobile Radio Service, the 4.9 GHz Band Service, and the 3650 MHz Wireless Broadband Service pursuant to part 90 of this chapter; the Wireless Medical Telemetry Service (WMTS) and the Medical Device Radiocommunication Service (MedRadio), pursuant to subparts H and I of part 95 of this chapter, respectively, unlicensed personal communication service, unlicensed NII devices and millimeter wave devices authorized under §§15.253(f), 15.255(g), 15.257(g), 15.319(i), and 15.407(f) of this chapter; and the Citizens Broadband Radio Service pursuant to part 96 of this chapter are subject to routine environmental evaluation for RF exposure prior to equipment authorization or use. All other portable transmitting devices are categorically excluded from routine environmental evaluation for RF exposure prior to equipment authorization or use, except as specified in §§1.1307(c) and 1.1307(d) of this chapter. Applications for equipment authorization of portable transmitting devices subject to routine environmental evaluation must contain a statement confirming compliance with the limits specified in paragraph (d) of this section. Technical information showing the basis for this statement must be submitted to the Commission upon request.” The EUT will be used with a separation distance of less than 20 centimeters between the radiating antenna and the body of the user or nearby persons and must therefore be considered a portable transmitter per 47 CFR 2.1093(b). COMPLIANCE WITH FCC KDB 447498 D01 General RF Exposure Guidance v06 “KDB 447498 D01 General RF Exposure Guidance v06” provides the procedures, requirements, and authorization policies for mobile and portable devices. Standalone radio SAR test exclusion is covered under section 4.3.1. Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Thresholds are met as shown in the Limits section below. Simultaneous transmission SAR test exclusion is covered under section 4.3.2. SAR test exclusion is determined for each operating configuration and exposure condition according to the reported standalone SAR of each applicable simultaneously transmitting antenna. When the sum of 1-g or 10-g SAR of all simultaneously transmitting antennas in an operating mode and exposure condition combination is within the SAR limit, SAR test exclusion applies to that simultaneous transmission configuration. Report No. STAK0123.5 EAR-Controlled Data 8/9

SAR TEST EXCLUSION EXRPT.2017.10.02 LIMITS Limits for General Population /Uncontrolled Exposure: 47 CFR 1.1310 (c) The SAR limits for general population/uncontrolled exposure are 0.08 W/kg, as averaged over the whole body, and a peak spatial-average SAR of 1.6 W/kg, averaged over any 1 gram of tissue (defined as a tissue volume in the shape of a cube). Exceptions are the parts of the human body treated as extremities, such as hands, wrists, feet, ankles, and pinnae, where the peak spatial-average SAR limit is 4 W/kg, averaged over any 10 grams of tissue (defined as a tissue volume in the shape of a cube). Exposure may be averaged over a time period not to exceed 30 minutes to determine compliance with general population/uncontrolled SAR limits. For 100 MHz to 6 GHz and test separation distances ≤ 50 mm, the SAR test exclusion thresholds are 1-g for head and body SAR and 10-g SAR for extremity SAR. ASSESSMENT For 100 MHz to 6 GHz and test separation distances ≤ 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [vf(GHz)] = 3.0 for 1-g SAR and = 7.5 for 10-g extremity SAR, where • f(GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step b below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 4.1f) is applied to determine SAR test exclusion. The SAR Test Exclusion Threshold is summarized in the following table: Measured Minimum Transmit Exclusion Radio Conducted Output Duty Cycle Separation Limit Compliant Frequency (MHz) Threshold Power (mW) Distance (mm) BTLE 2402 0.38928 1 5 0.121 3.0 Yes The information in the table above was obtained from: STAK0123.0 and Client supplied RF Exposure Information Form. Report No. STAK0123.5 EAR-Controlled Data 9/9


Document Created: 2018-08-19 15:25:11
Document Modified: 2018-08-19 15:25:11
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC