TCB Correspondance

FCC ID: EO924GZB

Cover Letter(s)

Download: PDF

FCCID_1062728

Appendix A
Non-Conformities for US Radio Equipment Authorization

Non-Conformities FCC ID: EO924GZB (CKC CS Ref # E09-000001-FCC-01)
The items listed below represent requests for information following review of this application for certification under United States (FCC) regulations. Further
question may arise pending review of responses to these items.

OK ID # Non-Conformity or Comment Submitted Response Respondent / Date of
Response
X C 1 The file that was uploaded for the Internal Photos was from a file New File in the proper format Jay Holcomb
format that is not accepted. Please Provide Internal photos in a file uploaded. 1/19/09
format that is acceptable.
X C 2 The file that was uploaded for the Operational Description was from a New File in the proper format Jay Holcomb
file format that is not accepted. Please Provide Operational uploaded. 1/19/09
Description in a file format that is acceptable.
X C 3 There is a note that you would possibly like to try for Confidentiality It is okay to not to have the internal Jay Holcomb
on Internal Photos. Would you like to try to hold the Internal photos photos held in confidence. 1/28/09
Confidential?

Note: This will require a request to be sent to the FCC for approval of
Confidentiality of the Internal Photos.
X TL 4 Test report " fcc-2400-002-001_24gzb15 247fcc-ic report" : Page 4, New Report Uploaded. Jay Holcomb
16, 18, 20. The calibration date were over due for HP8593E, PAM 1/28/09
126, E7405A. Please provide a updated equipment list with valid
calibration date
X TL 5 The radiated and conducted spurious emission was perform from New Report Uploaded. Jay Holcomb
9kHz-26GHz, however there is no indication of appropriate RBW On the page for radiated, it refers to 1/28/09
and detector function being employed. Please provide a revised test appendix A and B and appendix A is
report direct from the FCC with RBW and
detector function stated.
1/28/09: Appendix A and B indicated
RBW setting to be used.
X TL 6 KDB 558074, PSD option 1 has a sweep time requirement of New Report Uploaded. Jay Holcomb
”sweep= (SPAN/3 kHz" . Page 10 and 11 of the test report indicates 1/28/09 : sweep time is now 100sec. 1/28/09
a sweep time of 100mS which does not meet the sweep time
requirement for a span of 300kHz. Please provide a revised test report
with correct sweep time

The items indicated above must be submitted before processing can continue on the referenced application. Failure to provide the requested
information within 60 days may result in application dismissal pursuant to Section 2.917(c) and forfeiture of the filing fee pursuant to Section
1.1106.

How to read the table:
OK column indicates closure by CKC CS.
ID column is for use with Agents to assist in identifying the probable source for closure.
A – Application issue
TL – Test lab issue
C – Client issue
R – Retesting may be necessary
# column indicates unique or separate non-conformity items (note some items may be related).
Non-Conformity or Comment column indicates the evaluators specific question or comment.
Submitted response column indicates the response or a summary of the response provided.
Respondent / Date of Response column indicates the responding party or agent and the date of the response was either received or logged.

Document Created: 2009-01-29 13:34:25
Document Modified: 2009-01-29 13:34:25

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC