user manual

FCC ID: EMOICVBT1

Users Manual

Download: PDF
FCCID_4131954

! Model: iCVBT1 Instruction manual - US English Size: 102 x 150 mm Date: Jan 3, 2019 Mat’l: 100gsm paper (WF) Color: Black text on white background iHome Beauty Charging the Mirror Light Function Audio Function PORTABLE • Lift the door on the back of the unit. Connect included • Tap the center button to turn the mirror light ON or OFF. USB charging cable to the USB port, and the other end to (The light will activate if the speaker is ON or OFF.) a powered USB port. • Press and hold power icon to turn speaker USB AC ON or OFF USB charging adaptor cable (not included) (included) RESET • When mirror is ON, touch/hold icon for pairing mode, indicated by the blinking BLUE LED You look • The LED will flash red while charging, and will shut off Amazing! • Select “iHome iCVBT1” on your device’s automatically when the internal battery is fully charged. Bluetooth menu to connect • Tap to play / pause Bluetooth audio • Tap to answer & end Bluetooth calls • Touch/hold for 2 seconds to decline Battery Bluetooth calls Status/Pairing LED • Tap to lower or raise volume Note: If no audio is playing for 15 minutes, the unit will • Hold the center button to adjust the brightness level. automatically power off to conserve the battery. iCVBT1 Quick Start Guide 1 2 3 Adjusting the Mirror IMPORTANT SAFETY INSTRUCTIONS FCC Information FCC ID: EMOICVBT1 IC: 986B-ICVBT1 Limited One Year Warranty When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. product to be free from defects in workmanship and materials, under normal use and conditions, The door on the back of the unit also works as a instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: for a period of one (1) year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store kickstand for the mirror. Adjust the door to the desired GENERAL (1) This device may not cause interference and (2) This device must accept any interference received, including interference that may cause undesired operation where it was originally purchased. Should this fail to resolve the matter and service still be • Please exercise caution when in use as the mirror is made of glass. required by reason of any defect or malfunction during the warranty period, SDI will repair or, at angle as needed. 1. Water and Moisture – The unit should not be used near water. For example: near a bathtub, washbowl, kitchen its discretion, replace this product without charge. This decision is subject to verification of the sink, laundry tub, swimming pool or in a wet basement. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: 2. Ventilation – The unit should be situated so that its location or position does not interfere with its proper (1) This device may not cause harmful interference, and (2) this device must accept any interference defect or malfunction upon delivery of this product to the Factory Service Center authorized by ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation received, including interference that may cause undesired operation. Customer Service. openings. Also, it should not be placed in a built-in installation, such as a bookcase or cabinet, which may If service is required, please call Customer Service at 1-800-288-2792 to obtain a Return impede the flow of air through the ventilation openings. • Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s Authorization Number and shipping instructions. A copy of the sales receipt is required to validate 3. Heat – The unit should be situated away from heat sources such as radiators, heat registers, stoves or other authority to operate the equipment. in-warranty coverage. appliances (including amplifiers) that produce heat. Do not use around aerosol products or in the presence of • NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC oxygen being administered. Rules. Disclaimer of Warranty 4. Sunlight – Never place the mirror in or expose the mirror to direct sunlight. The sun’s rays can reflect to These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. become focused and cause excessive heat and/or fire. Do not use mirror in direct sunlight as reflected sunlight generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. It does not cover (i) products which have been damaged by negligence or willful actions, misuse could injure eyes. 5. Power Sources – The unit should be connected to a power supply only of the type described in the operating However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference or accident, or which have been modified or repaired by unauthorized persons; (ii) cracked or instructions or as marked on the appliance. to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CD’s 6. Power-Cable Protection – Power supply cables should be routed so that they are not likely to be walked on interference by one or more of the following measures: or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service or pinched by items placed upon or against them. It is always best to have a clear area from where the cable • Reorient or relocate the receiving antenna. Center and its return to the owner. exits the unit to where it is plugged into an AC socket. • Increase the separation between the equipment and receiver. This warranty is valid only in the United States of America and does not extend to owners of the 7. Cleaning – The unit should be cleaned only as recommended. See the Maintenance section of this manual • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. product other than to the original purchaser. In no event will SDI or any of its affiliates, for cleaning instructions. • Consult the dealer or an experienced radio/TV technician for help. contractors, resellers, their officers, directors, shareholders, members or agents be liable to you 8. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled into CAN ICES-3 (B)/NMB-3(B) or any third party for any consequential or incidental damages, any lost profits, actual, exemplary any openings or vents located on the product. or punitive damages. (Some states do not allow limitations on implied warranties or exclusion of 9. Attachments – Do not use attachments not recommended by the product manufacturer. 10. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna IC Statement consequential damages, so these restrictions may not apply to you.) This warranty gives you or cable system during a lightning storm or when it is left unattended and unused for long periods of time. This This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and specific legal rights, and you may also have other rights which vary from state to state. will prevent damage to the product due to lightning and power-line surges. Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two Your acknowledgment and agreement to fully and completely abide by the above mentioned 11. Overloading – Do not overload wall sockets, extension cords, or integral convenience receptacles as this conditions: disclaimer of warranty is contractually binding to you upon your transfer of currency (money can result in a risk of fire or electric shock. (1) This device may not cause interference. order, cashier's check, or credit card) for purchase of your SDI product. 12. Damage Requiring Service – The unit should be serviced by qualified service personnel when: (2) This device must accept any interference, including interference that may cause undesired operation of A. the power supply cable or plug has been damaged. the device. B. objects have fallen into or liquid has been spilled into the enclosure. C. the unit has been exposed to rain. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR D. the unit has been dropped or the enclosure damaged. d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio E. the unit exhibits a marked change in performance or does not operate normally. exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 13. Periods of Nonuse – If the unit is to be left unused for an extended period of time, such as a month or longer, (1) L’appareil ne doit pas produire de brouillage; the power cable should be unplugged from the unit to prevent damage or corrosion. (2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est 14. Servicing – The user should not attempt to service the unit beyond those methods described in the user’s susceptible d’en compromettre le fonctionnement. operating instructions. Service methods not covered in the operating instructions should be referred to qualified service personnel The device has been evaluated to meet general RF exposure requirement. Reset 15 Attention should be drawn to the environmental aspects of battery disposal” 16 Do not dispose of batteries in the household trash or fire” The device can be used in portable exposure condition without restriction. le dispositif a été évalué à satisfaire l'exigence générale de l'exposition aux rf. 17 No naked flame sources, such as lighted candles, should be placed on this product” l'appareil peut être utilisé dans des conditions d'exposition portatif sans restriction. 18 This product is suitable for use in tropical and/or moderate climates.” In the event of interrupted operation, use the extended wire of a paper clip or other thin tool to push in the Reset © 2019 SDI Technologies, Inc. All rights reserved. Button on the back of the unit. Questions? Visit www.ihome.com or call 1-800-288-2792 Toll Free 4 5 6 iCVBT1-122818-A Printed in China


Document Created: 2019-01-03 17:33:25
Document Modified: 2019-01-03 17:33:25
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC