User Manual

FCC ID: EMOIBTW88

Users Manual

Download: PDF
FCCID_4277819

IC Canada statement (revised) Model: iBTW88 Instruction manual - US English size: 408 x 150 Folded Size: 102 x 150 mm Date: May 10, 2019 Mat’l: 260gsm paper art card Color: CMYK 0/100/100/0 Front Rechargeable Speaker + CHARGING THE IBTW88 BLUETOOTH PAIRING AUX-IN / RESET Wireless Charging Pad Pairing The First Time Model: iBTW88 Charging via USB QUICK START GUIDE 2s QUICK START GUIDE iHome iBTW88 USB AC adaptor Select Mode/ USB charging (not included) ‘iHome Bluetooth cable (included) iBTW88’ on Power Pairing your Manual Pairing device’s Bluetooth iHome menu to 2s iBTW88 complete pairing. AUX-IN Audio Connect one end of a 3.5mm audio cable (not included) into Using The Charging Pad the AUX-IN jack on the speaker, and the other end to the To power the Wireless Charging headphone jack of your audio device. Play/Pause Volume Pad, connect a USB cable to the USB Port (power in) USB port on the side of the unit. * Press PLAY on your audio device to start playback. Speakerphone Control PLAYING BLUETOOTH AUDIO Connect the other end of the cable to the adapter made for * Control/navigate tracks from your audio device, too. your smartphone. Then plug the adapter into a power outlet. Reset Run Your Press to In the event of interrupted operation, use the extended tip of a Charging Favorite Play/Pause Line up the charging pin on the speaker with the charging jack paperclip or other thin tool to press in the Reset button Pin Music Apps Audio (located inside the AUX-IN jack). Press the Power Button to before placing the iBTW88 on the charging pad. When properly docked, the LED indicator will glow red to confirm the unit is turn back on. charging. USB LED Indicator (Speaker) Charging USING SPEAKERPHONE Port Indicator Battery Level: Compartment Door AUX-IN RED battery level low Answer Call End Call Reset RED battery charging Connect OFF battery charged CHARGE UNIT Bluetooth Status: or Press and BEFORE USE hold to BLUE pairing reject call ABOUT 6 HOURS BLUE connected www.ihome.com 1 2 3 Questions? 1•800•288•2792 Back WATER-RESISTANT OPERATION WIRELESS CHARGING PAD Model: iBTW88 IMPORTANT SAFETY INSTRUCTIONS FCC INFORMATION FCC ID: EMOIBTW88 For proper water-resistant operation, make sure the How to Wirelessly Charge Your Device Please heed all warnings, read and follow all instructions and keep these instructions handy for future FCC Radiation Exposure Statement IC: 986B-IBTW88 cover on the back of the speaker is completely flush with reference. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. CAUTION : Exposure to Radio Frequency Radiation. 1. Heat – The unit should be situated away from heat sources such as radiators, heat registers, the unit by pressing along the entire edge of the cover until Normal Charging - Use a 5V 2A USB AC adapter. stoves or other appliances (including amplifiers) that produce heat. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body it is completely and securely in place. Fast Charging - Use a 9V 1.67A USB AC adapter. 2. Only use attachments/accessories specified by the manufacturer. This product is suitable for use in tropical and/or moderate climates. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including 3. No naked flame sources, such as lighted candles, should be placed on the apparatus. interference that may cause undesired operation. Note: 4. Do not use this apparatus near water. Charging pad is NOT water-resistant. Wireless 5. Clean only with dry cloth. • Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Charging 6. Do not block any ventilation openings, install in accordance with the manufacturer’s instructions. • NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, 7. This product should be serviced by qualified service personnel when the apparatus has been Area damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance not operate normally, or has been dropped. with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off INTERNAL RECHARGEABLE LITHIUM-ION BATTERY and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. This device uses an internal rechargeable lithium-ion battery that should last the lifetime of Place your smartphone face up on the wireless charging area the device. If you suspect your battery may be dead, try charging it several times. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ready for • Consult the dealer or an experienced radio/TV technician for help. as shown above. The LED indicator on the charging pad will glow water red while your device charges, and will automatically shut off WARNING/DISPOSAL OF UNIT CAN ICES-3 (B)/NMB-3(B), CAN RSS216 / CNR-216 once your device is fully charged. Please do NOT attempt to change the battery yourself. Doing so may damage the unit and will void Canada Statement the warranty. When disposing of unit, follow the disposal instructions below: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic • Never dispose of used batteries/electronics with ordinary solid wastes, since they contain toxic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: LED Indicator substances. (1) This device may not cause interference. • Always dispose of used batteries/electronics in accordance with the prevailing community (2) This device must accept any interference, including interference that may cause undesired operation of the device. regulations that apply to the disposal of batteries/electronics. If there are no local regulations L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, concerning battery/electronics disposal, please dispose of the device in a waste bin for Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation electronic devices. est autorisée aux deux conditions suivantes : • Many electronics retailers now recycle batteries and other electronic components at no charge. (1) L’appareil ne doit pas produire de brouillage; RED not charging (reposition device) Check to see which ones in your area do so. (2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. RED device charging not ready OFF device charged CAUTION The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with 修正範圍 The battery used in this device may present a risk of fire, explosion or chemical burn if for water mistreated RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your May 10 2019 • Never use or charge the battery if it appears to be leaking, discolored, deformed, or in any way body WARNING: Remove metal protective or magnetic case from abnormal. phone before charging. When charging phone, do not place • Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline WARRANTY magnetic-striped or other metal objects on the charger. Doing so solution or other electrolytic substance. • Always confirm that the temperature is 5°C – 35° C (41° - 95° Fahrenheit) before you charge the For product support information and warranty please visit: could damage the object or this unit. Qi compatible phones with battery. Leakage or deterioration of the battery may occur if this warning is not heeded. metallic looking finishes will charge normally. • Never expose the battery to any liquid. www.ihome.com/support • Never expose the battery to excessive heat such as direct sunlight or fire. Never use the battery pack in an unventilated vehicle where excessive internal temperatures may be encountered. Note: The wireless charging process generates heat that may • Always keep the battery out of the reach of infants and small children. © 2019 SDI Technologies, Inc. All rights reserved Questions? Visit www.ihome.com cause phones and chargers to get warm to the touch. This is • Attention should be drawn to the environmental aspects of battery disposal” or call 1-800-288-2792 Toll Free natural for wireless charging devices. • CAUTION – Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. 4 5 6 iBTW88-190510-B Printed in China 修正範圍 May 10 2019


Document Created: 2019-05-10 15:44:35
Document Modified: 2019-05-10 15:44:35
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC