User Manual

FCC ID: EMOIBTW390

Users Manual

Download: PDF

iBTW390 - QSG (English)
Size: 700 x 160 mm (unfold), 140 x 160 mm (folded)
Color: 1C + 1C
Material: 260gsm2 art card,
May 27, 2019                 Front Cover


                                                                                                                                                                                                                                    Quick Set-Up:                                                                                              The Display                                                                                                                      Setting and Using the Alarms
                                                 Model: iBTW390                                      What’s                                        iBTW390 unit                                          AC adapter
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                This unit features dual alarms which can be set to different times and alarm sources. Each is
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                set in the same way. Instructions are given as “Alarm Button”; use Alarm 1 or Alarm 2
                                                                                                     Included:                                                                                                                      Step One
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                located on the back of the unit to set respective alarms.
                                       Bluetooth Bedside/Home Office                                                                                                                                                                Connecting the Unit                                                                                                                                            Time Display

                                                      Speaker System                                                                                                                                                                Connect the included AC adapter to the DC jack
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Note: Each step must be completed while display is flashing or the step will time-out in 10
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      seconds and will save current settings.
                                             with Qi Wireless Charging                                                                                                                                                              located on the back of the unit and connect the other                                                                                                                                              Alarm 1 Active Indicator
                                                                                                Meet Your iBTW390
                                                                                                                                                                                                                                                                                                                                     T ESER
                                                                                                                                                                                                                                                                                                                                     RESET




                                                                                                                                                                                                                                    end to a working wall outlet.                                                                             PM Time Indicator                                                                                                                 1. Press and hold the Alarm Button for 2 seconds until the alarm time display and alarm
                                                                                                                                                                                                                                                                                                           12V, 2.5A                 TSET
                                                                                                                                                                                                                                                                                                                                     TEST




                                                                                                                                                                                                                                                                                                                                                                                                                                      Low Backup Battery Indicator                 icon flash. A beep sounds.
                                                                                                                                                                                                                                                                                                                                                     Bluetooth                                                                        (Red LED)                                 2. Press the – or + Buttons to adjust the alarm time to the desired time (hold for rapid
                                                                                                                                                                                                                                                                                                                                                        Pairing                                                                        Alarm 2 Active Indicator                    setting).
                                                                                                Top                                                                                                                                                                                                                                                   Indicator
                                                                                                                                                                                                                                                                                                                                                    (Blue LED)                                                                                                                     Make sure you set the correct AM/PM alarm time. The PM indicator appears to the left of
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   the time display; there is no AM indicator.
                                                                                                                                                                                                                                    Step Two
                                                                                                                                               Snooze/Display                                                                                                                                                                                                                                                                                                                   3. Press the Alarm Button to confirm the alarm time setting. The wake-to schedule will
                                                                                                                                                                                                                                    Bluetooth Pairing                                                                                                                                                                                                                              flash. Press the – or + Buttons to set the desired alarm schedule: 7 Days (every day), 5
                                                                                                       Play/Pause/Voice Control Button                                                         +/– Settings/Volume                                                                                                                                                                                                                                                                 Days (week days only) or 2 Days (weekends only).
                                                                                                                                                                                               Buttons                              • Turn on your Bluetooth device and make it
                                                                                                                  Power Button                                                                                                                                                                                                                                                                                                                                                  4. Press the Alarm Button to confirm the alarm schedule. The wake source indicator will
                                                                                                                                                                                                                                     ‘discoverable’ by turning on Bluetooth mode.
                                                                                                                                                                                                                                                                                                                             iHome
                                                                                                                                                                                                                                                                                                                                               Using Qi Wireless Charging                                                                                                          flash on the display. Press the – or + Buttons to select the desired wake to alarm
                                                                                                                                                                                                                                    • Press the Power Button on the iBTW390. The first                                     iBTW390                                                                                                                                                 source: “bt” (Bluetooth) or tone.

                                                                                                                                                                                                                                                                                                                       +
                                                                                                                                                                                                                                      time the unit is powered on, it will automatically                                                       This unit will wirelessly charge Qi compatible wireless
                                                                                                                    Speaker                                                                          Wireless Charging Pad
                                                                                                                                                                                                              (under fabric)                                                                                                                   charging phones. Place Qi compatible device face up on                                                                              Wake to Bluetooth: You will wake to the currently linked Bluetooth device. If no device
                                                                                                                                                                                                                                      enter pairing mode.
                                                                                                                       Microphone                                                                                                                                                                                                              charging rest.                                                                                                                                           is detected, the alarm will default to current Tone.
                                                                                                                                                                                                                                    • Select ‘iHome iBTW390’ on your device’s
                                                                                                                                                                                                     Device Charging Rest                                                                                                                                                                                                                                                          Wake to Tone:         Press the Alarm Button to confirm. Press the – or + Buttons as
                                                                                                                                                                                                                                      Bluetooth menu to connect!                                                                                                                                                                                                                                        needed to listen to and to select one of the four built-in wake-to
                                                                                                                                                                                                                                                                                                                                               Check the Wireless Charging Indicator on the iBTW390
                                                                                                                                                                                                                                                                                                                                               for charging status:                                                                                                                                     tones (t1 - t4).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                5. Press the Alarm Button to confirm the alarm source. The volume display will flash.
                                                                                                                                                                                        Back                                        Step Three                                                                                                 LED glows solid amber for 10 seconds: Device is                                                                                  6. Press the – or + Buttons to adjust the alarm volume. Note that the alarm volume
                                                                                                                 Wireless Charging Indicator                                                                                        Setting Your Clock                                                                                                                                                                                                                             setting is stored separately from other volume settings.
                                                                                                                                                                                                                                                                                                                                               charging properly.
                                                                                                                       (below charging rest)                                                                                                                                                                                                                                                                                                                                    7. Press the Alarm Button to confirm the alarm settings and exit alarm setting mode. 2
                                                                                                                                                                                                                                    • Press and hold the Time Set Button until the                                                             Solid green LED: Device is charged.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   beeps will confirm alarm setting is complete. The alarm icon will remain on the display,
                                                                                                     Bottom                                                                                                                                                                                                                                    Rapid blinking amber LED: Device is not charging
                                                                                                                                                                                                                                     display flashes.                                                                                                                                                                                                                              indicating the alarm is armed.
                                                                                                                                                                                                                                    • Press the – or + Buttons to adjust selections and                                                        properly. Reposition device.

                                                                                                                                                                                                                   Alarm 1 Button
                                                                                                                                                                                                                                      press Time Set to confirm.                                                                                                                                                                                                                Previewing the Alarm and Turning the Alarm On/Off
                                                                                                                                                                                                                                                                                                                                               Note: The solid green LED may not glow when iOS
                                                                                                                                                                                                                   Alarm 2 Button   • Do this for time, year, month and date.
                                                                                                                                                  DC Jack
                                                                                                                                                                       12V, 2.5A

                                                                                                                                                                                                                                                                                                                                               devices are fully charged.                                                                                                       1.      Press and release the Alarm Button to view the current alarm time.
                                                                                                                                                                                                                                    • All done!
                                Quick Start Guide                                                                                                                                                                                                                                                                                                                                                                                                    Wireless Charging
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                2.      Press and release the Alarm Button as needed to toggle the alarm ON and OFF, indicated
                                                                                                                                                  USB Charging Port                Time Set Button       Bluetooth                  Automatic DST:                                                                                             CAUTION: Remove metal protective or magnetic case                                                         Indicator                      by the related white alarm indicator and a beep.
                                                                                                                                   Battery Door                                                          Pairing Button                                                                                                                        from phone before charging. When charging phone, do
            Questions? Contact Customer Service at 1-800-288-2792                                                                                                                                                                   This product can automatically change your clock in                                                                                                                                                                                         3.      When the alarm sounds, press the Power Button or the corresponding Alarm Button (1
                                                                                                Backup Battery Compartment                                                                                                          March and November for daylight savings time! To                                                           not place magnetic-striped or other metal objects on                                                                                     or 2) to disable the alarm and reset it to come on at the same time the next day.
                                                                                                                                                                                                                                                                                                                                               the charger. Doing so could damage the object or this
           For warranty visit:                                                                                                                                                                                                      enable, hold the Time Set Button for a full 5 seconds.
           www.ihome.com/support                                                                                                                                                                                                                                                                                                               unit. Qi compatible phones with metallic looking
                                                                                                                                                                                                                                    Press the +/- buttons to select DST ON/OFF.
                                                                                                                                                                                                                                                                                                                                               finishes will charge normally.




Snooze/Display Dimmer                                                                           Using Speakerphone                                                                                                                  Battery Back-Up                                                                                            IMPORTANT SAFETY INSTRUCTIONS                                                                                                    FCC Information                                                                                   Model: iBTW390
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    FCC ID: EMOIBTW390
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       IC: 986B-IBTW390
1.   To program Snooze, press and hold the Snooze/Display Dimmer during normal                  The unit must be powered on and linked to a Bluetooth phone to receive a call.                                                                                                                                                                 When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety.
     operation (when no alarm is sounding).                                                                                                                                                                                         The unit comes with a CR-2450 back-up battery installed to provide continuous alarm                        However, improper use can result in potential electrical shock or fire hazards. Please read and follow all safety and            FCC Radiation Exposure Statement
                                                                                                1.   When a call is received, playing music is muted to hear the ring tone.                                                         operation and clock settings in the event of a temporary power failure. Remove the battery                 operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take
                                                                                                                                                                                                                                                                                                                                               special note of all warnings listed in these instructions and on the unit.                                                       This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
2. Press the – or + Buttons to select the desired snooze time (between 01 and 29                     “Call” will flash on the display.                                                                                              pull tab before use. When the battery icon on the clock display is flashing, it is time to
                                                                                                                                                                                                                                    replace the back-up battery. The battery compartment is located on the bottom of the unit.                 1.  Water and Moisture – The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink,                 This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may
   minutes).                                                                                                                                                                                                                                                                                                                                       laundry tub, swimming pool or in a wet basement.                                                                                  not cause harmful interference, and (2) this device must accept any interference received, including interference that may
                                                                                                     Press the      Button to answer the call;                                                                                                                                                                                                                                                                                                                                       cause undesired operation.
                                                                                                                                                                                                                                                                                                                                               2. Ventilation – The unit should be situated so that its location or position does not interfere with its proper ventilation.
3. Press and release the Snooze/Display Dimmer Button to confirm Snooze setting. 2                   Press and hold the           Button to ignore the call.                                                                        1. Make sure the AC adapter is connected, or you will lose your                                                For example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings.
                                                                                                                                                                                                                                                                                                                                                   Also, it should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the flow of        • Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void
   beeps will sound.                                                                                                                                                                                                                   time and alarm settings during battery replacement.                                                         air through the ventilation openings.
                                                                                                2. Press the        Button to end the call and resume previous function.                                                                                                                                                                                                                                                                                                           the user’s authority to operate the equipment.
                                                                                                                                                                                                                                    2. Use a Phillips screwdriver to open the battery compartment                                              3. Heat – The unit should be situated away from heat sources such as radiators, heat registers, stoves or other                  • NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
4. While the alarm is sounding, press and release the Snooze/Display Dimmer Button to                                                                                                                                                                                                                                                              appliances (including amplifiers) that produce heat.                                                                            15 of the FCC Rules.
                                                                                                                                                                                                                                       door.                                                                                                                                                                                                                                    These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
   temporarily silence the alarm for the set duration (9 minutes is the default). Snooze can
   be used several times during the 1 hour alarm sounding time.                                 Using Voice Control                                                                                                                 3. Remove the exhausted battery from the compartment and
                                                                                                                                                                                                                                                                                                                                               4. Power Sources – The unit should be connected to a power supply only of the type described in the operating
                                                                                                                                                                                                                                                                                                                                                   instructions or as marked on the appliance. Only use the AC adapter that came with the unit.                                 equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                instructions, may cause harmful interference to radio communications.
                                                                                                                                                                                                                                       insert 1 CR-2450 battery, checking that the + side is facing you.                                       5. Power-Cable Protection – Power supply cables should be routed so that they are not likely to be walked on or                  However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
                                                                                                NOTE: The unit must be powered on and linked to an iOS or Android Bluetooth device to                                                  Replace the compartment door. Do not overtighten.                                                           pinched by items placed upon or against them. It is always best to have a clear area from where the cable exits the
5. To adjust the brightness of the display, press and release the Snooze/Display Dimmer                                                                                                                                                                                                                                                            unit to where it is plugged into an AC socket.                                                                               interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
   Button during normal operation (when no alarm is sounding) to cycle through the              use Voice Control. Press and hold the       Button for 2 seconds. ‘CALL’ will appear on the                                                                                                                                                                                                                                                                                     encouraged to try to correct the interference by one or more of the following measures:
                                                                                                                                                                                                                                                                                                                                               6. Cleaning – The unit should be cleaned only as recommended. See the Maintenance section for cleaning instruc-                  • Reorient or relocate the receiving antenna.
   brightness display settings (Hi, 3, 2, Lo, and Off).                                         display. Wait for a beep to activate voice control with Siri or Google Assistant.                                                                                                                                                                  tions.                                                                                                                       • Increase the separation between the equipment and receiver.
                                                                                                                                                                                                                                                                                                                                               7. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled into any              • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
                                                                                                                                                                                                                                    WARNING: Lithium batteries can explode or cause burns if disassembled, shorted, recharged,                     openings or vents located on the product.                                                                                    • Consult the dealer or an experienced radio/TV technician for help.
                                                                                                Voice control requires an active internet connection on connected Bluetooth device with iOS 10 and Android 4.1 and later.           exposed to water, fire, or high temperatures. Do not place loose batteries in a pocket, purse,
                                                                                                                                                                                                                                                                                                                                               8. Attachments – Do not use attachments not recommended by the product manufacturer.
Manual Bluetooth Pairing                                                                        When activated, the speaker microphone acts as an extension of the microphone in your smartphone to make/take calls,                or other container containing metal objects, mix with used or other battery types, or store
                                                                                                                                                                                                                                                                                                                                               9. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna or cable
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                CAN ICES-3(B) / NMB-3(B)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                CAN RSS-216/CNR-216
                                                                                                enable you to ask Siri®/Google Assistant™ to play music and more.                                                                   with hazardous or combustible materials. Store in cool, dry, ventilated area. Follow applicable                system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent
1. Press and hold the Bluetooth Button on the back of the iBTW390 for 2 seconds.                                                                                                                                                    laws and regulations for transport and disposal.                                                               damage to the product due to lightning and power-line surges.                                                                IC Statement
   “PAIR” will appear on the display and the Bluetooth indicator will flash blue.               Charging Devices Via USB Port                                                                                                                                                                                                                  10. Overloading – Do not overload wall sockets, extension cords, or integral convenience receptacles as this can result
                                                                                                                                                                                                                                                                                                                                                   in a risk of fire or electric shock.                                                                                         This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
2. Select ‘iHome IBTW390’ on your device’s Bluetooth menu to connect device. If                 1.   Connect the standard size end of a USB                                                                                         WARNING                                                                                                    11. Damage Requiring Service – The unit should be serviced by qualified service personnel when:                                  1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause
                                                                                                                                                                                                                                                                                                                                                   A. the power supply cable or plug has been damaged.                                                                          undesired operation of the device.
   pairing is successful, a voice prompt will announce ‘CONNECTED’ and the Bluetooth                 cable (not included) to the USB port on                                                                                        • Do not ingest the battery, Chemical Burn Hazard. This product contains a coin/button cell                                                                                                                                                 L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et
                                                                                                     the back of the unit and connect the other                                                                                                                                                                                                    B. objects have fallen into or liquid has been spilled into the enclosure.                                                   Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux
   indicator will appear solid blue, indicating the iBTW390 is ready to play audio.                                                                                                                                                   battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in
                                                                                                                                                                                                                                                                                                                                                   C. the unit has been exposed to rain.                                                                                        deux conditions suivantes :
                                                                                                     end to the charging port on your device.                                                                                         just 2 hours and can lead to death.                                                                                                                                                                                                       (1) L’appareil ne doit pas produire de brouillage;
                                                                                                                                                                                                                                                                                                                                                   D. the unit has been dropped or the enclosure damaged.
                                                                                                                                                                            12V, 2.5A



     Once the iBTW390 is paired to a device, it will attempt to autolink when the device                                                                                                                                            • Keep new and used batteries away from children. If the battery compartment does not                                                                                                                                                       (2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre
                                                                                                2. Monitor the charging on your device.                                                                                               close securely, stop using the product and keep it away from children. If you think                          E. the unit exhibits a marked change in performance or does not operate normally.                                            le fonctionnement.
     is within range (about 33 feet). To reset Bluetooth, press and hold the Bluetooth Button
                                                                                                   Some devices use a proprietary charging                                                                                            batteries might have been swallowed or placed inside any part of the body, seek immedi-                  12. Periods of Nonuse – If the unit is to be left unused for an extended period of time, such as a month or longer, remove
     for 10 seconds.                                                                                                                                                                                                                                                                                                                               batteries before storage                                                                                                     The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102
                                                                                                   method and will not charge using the USB                                                                                           ate medical attention.”                                                                                                                                                                                                                   RF exposure, users can obtain Canadian information on RF exposure and compliance.
                                                                                                                                                                                                                                                                                                                                               13. Servicing – The user should not attempt to service the unit beyond those methods described in the user manual.               Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité à
                                                                                                   port. If this happens, you must charge your                                                                                                                                                                                                     Service methods not covered in the operating instructions should be referred to qualified service personnel.                 l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformité de rf.
Playing Audio Via Bluetooth                                                                        device using the charger that came with it.
                                                                                                                                                                                                                                    Maintenance                                                                                                14. Magnetic Interference: This product’s speakers contain powerful magnets which could cause interference or
                                                                                                                                                                                                                                                                                                                                                   damage to sensitive equipment such as hard drives, CRT televisions and monitors, as well as medical, scientific, and         This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your
                                                                                                                                                                                                                                                                                                                                                   navigational devices. Keep this unit away from these products at all times.                                                  body.
1. “bt” and the   Bluetooth indicator appear on the display when the unit is on and your        NOTE: Unit must be plugged into working                                                                                             • Place the unit on a level surface away from sources of direct sunlight or excessive heat.                15. Only use attachments/accessories specified by the manufacturer. This product is suitable for use in tropical and/or          ce matériel doit être installé et exploité à une distance minimale de 20 cm entre le radiateur et votre corps. "
                                                                                                outlet to charge devices.                                                                                                                                                                                                                          moderate climates.
   device is connected. Press the   Button on the unit to play or pause audio from your                                                                                                                                             • Protect your furniture when placing your unit on a natural wood and lacquered finish. A
                                                                                                                                                                                                                                      cloth or other protective material should be placed between it and the furniture.                        16. The unit should be serviced by qualified service personnel when the enclosure damaged or does not operate                    1 Year Limited Warranty
   linked Bluetooth device.                                                                                                                                                                                                                                                                                                                        normally.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                For warranty and full instructions, visit ihome.com/support
                                                                                                                                                                                                                                    • Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning             17. No naked flame sources, such as lighted candles, should be placed on the apparatus.
2. Press the – or + Buttons to adjust the volume on the unit.                                                                                                                                                                         agents such as thinner or similar materials can damage the surface of the unit.
                                                                                                                                                                                                                                                                                                                                               18. WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture”
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     © 2019 SDI Technologies, Inc. All rights reserved.
                                                                                                                                                                                                                                                                                                                                               19. CAUTION – Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.                                                         Questions? Visit www.ihome.com
                                                                                                                                                                                                                                                                                                                                               20. Do not dispose of batteries in the household trash or fire                                                                                                                or call 1-800-288-2792 Toll Free
                                                                                                                                                                                                                                                                                                                                               21. The mains plug of power adaptor is used as the disconnect device, it shall remain readily operable.                         iBTW390-052719-B                                                                                                    Printed in China




                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  5/27/2019



Document Created: 2019-05-27 14:15:55
Document Modified: 2019-05-27 14:15:55

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC