User Manual

FCC ID: EMOIBT297V2

Users Manual

Download: PDF
FCCID_4296311

iBT297v2 - QSG (English) Size: 700 x 160 mm (unfold), 140 x 160 mm (folded) Color: 1C + 1C Mar. 12, 2019 Front Cover Quick Set-Up: Quick Set-Up: Setting and Using the Alarms What’s 100V-240V universal Model: iBT297v2 Included: iBT297v2 unit AC adapter Step One Step Four This unit features dual alarms which can be set to different times and alarm sources. Each is set in the same way. Instructions are given as “Alarm Button”; use Alarm 1 Button or Alarm 2 Connecting the Unit Bluetooth Pairing Button to set respective alarms. Note: Each step must be completed while display is flashing Bluetooth Color Changing Connect the included AC adapter to the DC • Turn on your Bluetooth device and make it MODE or setting will time-out with any changes saved. jack located on the back of the unit and ‘discoverable’ by turning on Bluetooth mode. Dual Alarm Clock Radio Meet Your iBT297v2 connect the other end to a working wall outlet. T T ESER RESET SET TEST • Press the Mode Button on the iBT297v2 as 1. Press and hold the Alarm Button for 2 seconds until the alarm time display and alarm icon flash. A beep sounds. with USB Charging and Voice Control needed until the ‘BT’ indicator icon appears 2. Press the – or + Buttons to adjust the alarm time to the desired time (hold for rapid setting). 2s Make sure you set the correct AM/PM alarm time. The AM and PM indicators appear to the left of the Mode Button Power Button Step Two on the display. display. Setting Your Clock • Press and hold the Bluetooth Pairing Button 3. Press the Alarm Button to confirm the alarm time setting. The alarm schedule will flash: on the back of the unit for 2 seconds. A voice 7 (every day), 5 (weekdays) or 2 (weekend only). Press the – or + Buttons to select the desired Sleep Button • Press and hold the Time Set Button until the display flashes. prompt will confirm pairing mode is active. alarm schedule. Plus Settings Button • Select ‘iHome iBT297v2’ on your device’s 4. Press the Alarm Button to confirm the alarm schedule. The wake-to source will flash. Volume Up Button • Press the – or + Buttons to adjust selections iHome iBT297v2 5. Press the – or + Buttons to select the desired wake-to alarm source: Bluetooth, FM radio, Tone and tap Time Set to confirm. Bluetooth menu to connect! or Light Only (no alarm sound). Minus Settings Button • Do this for time, year, month and date. Wake to Bluetooth: You will wake to the currently linked Bluetooth device. If no device is Volume Down Button • All done! detected, the alarm will default to the last tone selected. Voice Control Button (Answer Calls) Play/Pause/Presets Button (End Calls) Wake to FM radio: Press the Alarm Button to confirm. Press the Presets Button to select an FM The Display preset to wake to, or press the – or + Buttons to tune in a desired wake to station. Alarm 1 Button Alarm 2 Button Automatic DST: Wake to Tone: Press the Alarm Button to confirm. Press the – or + Buttons to select the desired This product can automatically change your tone to wake to (Tone 1 -Tone 4). Time/Alarm Time/Radio Frequency Display clock in March and November for daylight Wake to Light Only: Press the Alarm Button to confirm. Select this mode to wake to silent light Color Mode Button Snooze/Display Dimmer Button savings time! To enable, hold the Time Set only alarm. (You will then skip volume setting and advance to step 9 Wake to Light setting.) Button for 5 full seconds. You’ll notice the 6. Press the Alarm Button to confirm wake-to source. The alarm volume will flash (unless Wake Backup Battery screen says “DST ON”. PM/AM Indicators to Light is set wake to choice, then volume setting is skipped and you are done). Compartment Time Set/DST 7. Press the – or + Buttons to adjust the alarm volume. Button 8. Press the Alarm Button to confirm alarm volume. The current Wake to Light mode will flash. iBT297v2 Step Three Low Backup Battery Indicator 9. Press the – or + Buttons to select the desired light mode to wake to (Slow Fade, Fast, One DC Jack USB Charging Port Bluetooth Pairing Adjusting Color Modes Color, Pulse, Sky Gradient, Lamp, Off or Dawn). Bluetooth/Pairing Indicator (7.5V/2000mA) (5V/1A) Button 10. Press the Alarm Button to confirm the alarm settings and exit alarm setting mode. 2 beeps will Press and release the Color Mode Button as Alarm Active Indicator confirm alarm setting is complete. The alarm icon will remain on the display, indicating the alarm is needed to cycle to the desired color mode COLOR Current Mode: Color Mode: Sleep Mode Indicator armed. FM Antenna light setting. Indicators on the display show Bluetooth, Fade, Fast, 11. To turn off a sounding alarm and reset it to come on the next day at the same time, press the FM Radio 1 Color, Pulse, the current light mode for 5 seconds. Power Button or the associated alarm button (Alarm 1 Button or Alarm 2 Button) to reset Quick Start Guide Pull Tab Sky, Lamp, Off alarm. Remove the pull tab before initial use to Questions? Contact Customer Service at 1-800-288-2792 activate the Sure Alarm battery backup system Previewing the Alarm and Turning the Alarm On/Off Bottom Back Press and release the desired Alarm Button as needed to preview the alarm and to toggle the For warranty visit: alarm ON (indicated by the alarm icon) or OFF (no alarm icon). www.ihome.com/support Snooze/Display Dimmer Setting And Using FM Presets Using the Speakerphone feature Color Change Mode IMPORTANT SAFETY INSTRUCTIONS Please heed all warnings, read and follow all instructions and keep these instructions handy for future reference. 1. To program Snooze, press and hold the Snooze/Display Dimmer Button for 2 seconds The unit allows you to store up to 6 FM radio station presets NOTE: The unit must be powered on and linked to a Bluetooth phone to receive a call. Press and release the Color Mode Button as needed to cycle to the desired color mode light Heat – The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances during normal operation (when no alarm is sounding). setting. Indicators on the display show the current light mode for 5 seconds: (including amplifiers) that produce heat. 1. Press and release the Mode Button as needed until the FM indicator icon appears on the When a call is received, playing music is muted to hear the ring tone and the cabinet flashes Only use attachments/accessories specified by the manufacturer. This product is suitable for use in tropical and/or moderate 2. Press the – or + Buttons to select the desired snooze time (between 01 and 29 minutes). green. display. SLOW FADE: Gradually fades from one color into the next climates. The unit should be serviced by qualified service personnel when the enclosure damaged or does not operate normally. No 3. Press the Snooze/Display Dimmer Button to confirm Snooze setting. 2 beeps will sound. naked flame sources, such as lighted candles, should be placed on the apparatus. 2. Press the – or + Buttons to tune the radio to the desired station (hold to scan). “CALL” will flash on the display. Adjust call volume on your device and/or on the unit as • While the alarm is sounding, press the Snooze/Display Dimmer Button to temporarily needed. FAST: Fades quickly from color to color • Do not use this apparatus near water silence the alarm for the set duration (9 minutes is the default). Snooze can be used 3. Press and hold the Play/Pause Presets Button to enter Preset setting mode. The display and • Clean only with dry cloth 1-COLOR: Pauses on the last color shown in Fast Change mode • Do not block any ventilation opening several times during the one hour alarm cycle. button will flash. • Unplug this apparatus during lightning storm or when unused for long periods of time 4. Press and release the – or + Buttons until the preset number (P1- P6) you wish to set is Press the Voice Button to answer the call; press the Play/Pause/Presets Button to ignore PULSE: Pulses to the beat of playing music if volume is up Warning: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture • To adjust the brightness of the display, press the Snooze/Display Dimmer Button during Damage Requiring Service - This product should be serviced by qualified service personnel when: normal operation (when no alarm is sounding) to cycle through the brightness display displayed. the call or to end an active call. SKY: Matches the color of the sky at the current time of day - Plug has been damaged. Press the Voice Button to answer a second call and place the first on hold (press again to - objects have fallen into or liquid has been spilled into the enclosure. settings, including OFF. 5. Press and release the Play/Pause Presets Button. 2 beeps will sound to confirm the preset LAMP: Changes colors to warm white light for maximum illumination - the unit has been exposed to rain. has been assigned. Repeat steps 2 - 5 until you have set up to 6 preset stations. switch between calls). - the unit has been dropped or the enclosure damaged. OFF: Turns cabinet lights OFF - the unit exhibits a marked change in performance or does not operate normally Sleep Mode 6. To listen to a preset FM station at any time, turn on FM radio mode and press the Play/Pause CAUTION – Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type This unit allows you to sleep to the current sound source for a set time before turning the unit Presets Button to cycle to the desired preset. Using the Voice Control feature The mains plug of power adaptor is used as the disconnect device, it shall remain readily operable. WARNING off. NOTE: The unit must be powered on and linked to an iOS or Android Bluetooth device to use Replacing and Installing Clock Backup Battery Do not ingest the battery, Chemical Burn Hazard. This product contains a coin/button cell battery. If the coin/button cell battery 1. To set Sleep time, press and release the Sleep Button as needed to cycle to the desired Using FM Radio in Other Countries Voice Control. Press and hold the Voice Button for 2 seconds and wait for beep to activate Note: 1 CR2450 battery is included with the unit. Pull battery tab before using the unit. is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think sleep duration: 120, 90, 60, 30 or 15 minutes or OFF (turns the unit off). The sleep icon will voice control with Siri or Google Assistant. “CALL” will flash on the display. Short press to seek batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. By default, this unit is set to USA frequency steps. To use the radio outside the USA: forward. A battery backup circuit will maintain the time and alarm time settings in the event of a appear on the display. 1. Make sure unit is OFF. temporary power interruption (the display is NOT maintained). The battery backup circuit will FCC INFORMATION iBT297V2 2. Press the or Buttons to adjust the sleep volume on the unit. Note that the sleep Voice control requires an active internet connection on connected Bluetooth device with iOS 10 and Android 5.0 and later. also operate the buzzer alarm to wake you up at the selected wake up time even if the power is FCC Radiation Exposure Statement FCC ID: EMOIBT297V2 2. Press and hold the Mode Button for 10 seconds until “USA” appears in the display. When activated, the speaker microphone acts as an extension of the microphone in your smartphone to make/take calls, This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. IC: 986B-IBT297V2 volume setting is stored separately from other volume settings. enable you to ask Siri®/Google Assistant™ to play music and more. out. When the Low Backup Battery Indicator flashes in the display, you should replace the 3. Press and release – or + Buttons to cycle to your location: Europe, Japan, Australia, China or This device complies with Part 15 of the FCC Rules, operation is subject to the following two backup battery as soon as possible. conditions: (1) This device may not cause harmful interference, and (2) this device must accept any When Sleep mode is active, press and release the Sleep Button to display remaining sleep USA. interference received, including interference that may cause undesired operation. To install/replace the backup battery: time. 4. Press and release the Mode Button to exit frequency setting mode. 2 beeps will confirm Charging Devices Via USB Port • Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. setting. IMPORTANT: When replacing the backup battery be sure to Connect a USB cable (not included) to the USB port on the back of the unit and connect the • NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the have the unit connected to the AC outlet to maintain all of your FCC Rules. other end to the charging port on your device. It is often best to use the charging cable FM Radio - Extend the FM antenna for best reception. Playing Audio via Bluetooth supplied with your device. settings, otherwise it will be necessary to reset the time and These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may alarm time after the batteries are replaced. cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular 1. Press and release the Mode Button as needed until the FM indicator icon and current FM installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning 1. Press and release the Mode Button as needed until the “BT” indicator icon appears on the 1. Use a Phillips screwdriver to unscrew the battery door the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: radio frequency appear on the display. display. located on the bottom of the unit. Remove the battery door. • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. 2. Press the – or + Buttons to tune the radio to the desired station (hold to scan for the next 2. Press the Play/Pause/Presets Button on the unit to play, pause and resume play of audio If replacing battery, remove the exhausted battery. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. clear station). from your linked Bluetooth device. 2. Insert 1 fresh CR2450 battery in the backup battery • Consult the dealer or an experienced radio/TV technician for help. CAN ICES-3 (B)/NMB-3(B) 3. Press the or Buttons to adjust the volume on the unit. 3. Press the – Button to go to the previous track (or start of current track). compartment. Make sure the “+” side of the battery is facing Canada IC statement Press the + Button to advance to the next track. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development 4. When you are through listening, press the Power Button to turn the unit off. T ESER RESET you (see illustration). Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 4. Press the or Buttons to adjust the volume on the unit. You may need to adjust the TSET TEST NOTE: Unit must be plugged into 3. Replace the battery door and screw shut. Do not over-tighten. Confirm that the backup 1. This device may not cause interference. volume on your device, too. working outlet to charge devices. battery indicator is not flashing in the display. 2. This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et 5. When done listening, press the Power Button to turn the unit off. Note: Make sure you dispose of batteries properly (see your local regulations) Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : NOTE: Bluetooth audio is only available when unit is in Bluetooth mode. (1) L’appareil ne doit pas produire de brouillage; (2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. iBT297V2-031219-A Printed in China


Document Created: 2019-05-05 16:40:22
Document Modified: 2019-05-05 16:40:22
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC