User Manual

FCC ID: EMOB12

Users Manual

Download: PDF
FCCID_3873776

Model: RM-B12VM.EXv8 / SH-B12VM.EXv8 Generic IB - English Color: 1C + 1C - Black text on white paper Size: 50 x 50 mm (folded) 300 x 100 mm (unfold) Date: May 21, 2018 Introduction 2. Charging Your Ear Buds Model: RM/SH-B12 Your new Bluetooth stereo ear buds are designed to link with your Bluetooth enabled smartphone or Your Bluetooth ear buds operate on a built-in rechargeable battery. Although the battery was fully charged when it left our factory, the battery can lose power even during periods of non-use. Make music player to allow you to wirelessly listen to music and answer phone calls within the normal 10 sure to charge the battery before using the phone for the first time. meter (33 feet) Bluetooth operating range. To charge the battery connect the larger plug of the included USB charging Please review this manual carefully to make sure you are getting the maximum benefit from all of the cable to the powered USB port of a computer or a USB/AC adapter and then features of your new ear buds, and keep this manual for future reference. connect the smaller plug to the USB charging port on side of the control Rechargeable dongle as shown in the illustration. The Charging Indicator will glow red while the ear buds are charging. The indicator will glow blue when Bluetooth What’s Included the ear buds are fully charged and ready to use. Earbuds When fully charged the battery should provide up to 6 hours of talk time or music playing time at a USB Charging Cable normal listening level. If operated at maximum volume the music playing time will be reduced. NOTE: While charging, the earbud power will turn off to conserve battery power and minimize charging time. Lx 2 SIZE Mx 2 SIZE Sx 2 SIZE 3. Wearing Your Ear Buds User Manual Silicon Ear Cushions The recommended usage is to position the cable behind your neck before inserting the ear buds in B12 Stereo ear buds your ears. The ear buds should be worn with the control dongle on your right side. with control dongle Case Note: Noise isolation ear buds like the B12 are designed to provide a good seal in your ears and block outside sounds. You should not use noise isolation ear buds in situations that require you to hear CHARGE outside warning sounds. PREPARATION FOR USE BEFORE 1. Controls and Indicators The ‘M’ size silicon tips were installed on the ear buds at our factory. If you wish to change to either the ‘S’ or ‘L’ size tips simply pull the ‘M’ size tips USE off the ear buds and replace them with the ‘S’ or ‘L’ size tips. Be sure to push the ‘S’ or ‘L’ size tips on to the ear buds until they are firmly seated on the 5 tubes so that the tips do not come off the ear buds when you remove them 4 1 + Button (Volume Up / Skip Forward) 1 6 Multi-Function Control Button (MFB) from your ears. Using the proper size tips will insure that you get the best 2 possible seal in your ear canal and provide the best audio quality. 3 – Button (Volume Down / Skip Back) 2 4 Power/Pairing/Charging LED Indicators 5 Microphone (on back side of dongle) 3 BC 6 USB Charging Port OPERATING INSTRUCTIONS Function Action Required These limits are designed to provide reasonable protection against harmful interference in a residential 1. Switching Your Ear Buds On and Off Turn Ear Buds 'On' When Ear Buds are 'Off’, Press and Hold the MFB for 2 seconds until you hear a installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and confirmation tone and the LED indicator flashes blue. used in accordance with the instructions, may cause harmful interference to radio communications. NOTE: The first time you perform this operation you might find it convenient to place only the left ear Enter the Pairing Mode When Ear Buds are 'Off' Press and Hold the MFB for 7 seconds until you hear a However, there is no guarantee that interference will not occur in a particular installation. If this equipment does bud in your left ear. This will allow you to hold the control dongle in your right hand so that you can confirmation tone and see the LED indicator alternately flashing red and blue. cause harmful interference to radio or television reception, which can be determined by turning the equipment see the control buttons and the LED indicator and still hear the confirming voice prompts in your left Pairing Make sure your Bluetooth device is 'On' and in the Pairing Mode. When “B12-VM” off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ear. Once the ear buds have turned on and paired with your Bluetooth device you can then place appears on your device’s menu, select it to complete pairing. • Reorient or relocate the receiving antenna. Play / Pause Short press the MFB to start playback. Short press to pause playback. Short press • Increase the separation between the equipment and receiver. the right ear bud in your right ear. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. to resume playback. 2. Power On / Auto-Linking Mode Skip to next track Short press the "+" button during playback • Consult the dealer or an experienced radio/TV technician for help. PRESS and HOLD the Multi-Function Button (MFB) on the control dongle for approximately 2 seconds Skip to beginning of current track Short press the " - " button during playback CAN ICES-3 (B)/NMB-3(B) until you hear a confirmation tone that confirms the power is ‘On’. The blue LED begins flashing slowly Skip to beginning of previous track Short press the " - " button twice during playback The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. indicating that your ear buds are in the Auto-Linking Mode and trying to re-link to a previously paired Increase volume Press and hold the "+" button during playback device as long as that device is within the normal pairing range of approximately 33-feet. If your ear Decrease volume Press and hold the " - " button during playback Limited One-Year Warranty Information buds do not find a previously paired device that is in range and turned ‘on’ within 5 minutes they will Answer an incoming phone call Short press the MFB when you hear the incoming ring sound. NOTE: Music will automatically pause when you are answering a call and resume when you end the call. eKids warrants this product to be free from defects in workmanship and materials, under normal use and conditions, switch from the Auto-Linking mode to the Power ‘Off’ mode to extend the battery life. for a period of one (1) year from the date of original purchase. Should this product fail to function in a satisfactory Decline an incoming phone call Press and hold the MFB for 2 seconds to decline the incoming call. 3. Power Off End a call manner, it is best to first return it to the store where it was originally purchased. Should this fail to resolve the matter Short press the MFB to end the call and 'hang up'. and service still be required by reason of any defect or malfunction during the warranty period, eKids will repair or, To shut the power ‘Off’ at any time PRESS and HOLD the Multi-Function Button (MFB) on the control Last number redial When phone is paired with ear buds but no call is in progress double press the MFB at its discretion, replace this product without charge. This decision is subject to verification of the defect or dongle for approximately 2 seconds. You will hear a confirmation tone, the red LED flashes three times, to redial the last number. malfunction upon delivery of this product to the Factory Service Center authorized by Customer Service. If service and then the power shuts off. Clear all paired devices Press and hold both the “+” and the “ – “ buttons for 7 seconds. is required, please call Customer Service at 1-888-TOP-TOYS to obtain a Return Authorization Number and Turn Ear Buds Off Press and hold the MFB for 2 seconds until you hear a confirmation tone. The LED shipping instructions. A copy of the sales receipt is required to validate in-warranty coverage. 4. Manually Pairing Your Ear Buds With Your Bluetooth Device indicator flashes red and then shuts off. Disclaimer of Warranty NOTE: Your ear buds must be ‘Off’’ to begin the manual pairing process. NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover With the ear buds in the ‘Off’ mode, PRESS and HOLD the Multi-Function Button (MFB) on the control (i) products which have been damaged by negligence or willful actions, misuse or accident, or which have been dongle for approximately 7 seconds. After 2 seconds you will hear a confirmation tone, and then the FCC/IC Information FCC ID: EMOB12 modified or repaired by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; LED indicator begins alternately flashing blue and red. Release the Multi-Function Button (MFB) (iii) damage to digital media players, CD’s or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner. This warranty is valid only in the United States of America and Make sure that your Bluetooth device is turned ‘On’ and in the Pairing mode. Refer to the instructions This device complies with Industry Canada’s licence-exempt RSSs. does not extend to owners of the product other than to the original purchaser. In no event will eKids or any of its supplied with your device if necessary. When your device “finds” the B12 ear buds, you will see Operation is subject to the following two conditions: affiliates, contractors, resellers, their officers, directors, shareholders, members or agents be liable to you or any third “B12-VM” appear on your device’s Bluetooth menu screen together with the words “Not Paired”, “Not (1) This device may not cause interference; and party for any consequential or incidental damages, any lost profits, actual, exemplary or punitive damages. (Some Connected” or similar. Touch “B12-VM” to complete the pairing process. You will hear a confirmation (2) This device must accept any interference, including interference that may cause undesired operation of the device. states do not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions tone, and you will see “B12-VM Connected” on your devices Bluetooth menu. The LED indicator will This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: may not apply to you.) This warranty gives you specific legal rights, and you may also have other rights which vary slowly flash blue when you are successfully paired. NOTE: If your Bluetooth device asks for a (1) This device may not cause harmful interference, and (2) this device must accept any interference from state to state. Your acknowledgement and agreement to fully and completely abide by the above mentioned disclaimer of warranty Password or a PIN to complete the pairing process, enter “0000” on the keypad of your device. received, including interference that may cause undesired operation. is contractually binding to you upon your transfer of currency (money order, cashier's check, or credit card) for You are now ready to begin streaming music wirelessly from your Bluetooth device to your B12 purchase of your eKids product. • Warning: Changes or modifications to this unit not expressly approved by the party responsible for Bluetooth ear buds. Distributed by eKids, LLC compliance could void the user’s authority to operate the equipment. For questions or comments please call our toll-free number: 1-888-TOP-TOYS 5. Using Your Bluetooth Ear Buds • NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, Also visit our website: www.ekids.com The following chart on back page explains the basic functions and operations of your Bluetooth ear buds. pursuant to Part 15 of the FCC Rules. 1299 Main Street Rahway, NJ 07065 Printed in China B12-052118-B


Document Created: 2018-05-21 10:32:27
Document Modified: 2018-05-21 10:32:27
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC