Test Report

FCC ID: EMJTCTH661

Test Report

Download: PDF
FCCID_1150087

FCC TEST REPORT REPORT NO.: RF980615A03 MODEL NO.: CTH-461, CTH-460, CTH-661 RECEIVED: June 15, 2009 TESTED: July 13 ~ 17, 2009 ISSUED: July 22, 2009 APPLICANT: PRIMAX ELECTRONICS LTD. ADDRESS: No. 669, Ruey Kuang Road, Neihu, Taipei, Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien 244, Taiwan This test report consists of 23 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by TAF, or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF980615A03 1 Report Format Version 3.0.0

Table of Contents 1 CERTIFICATION ....................................................................................... 3 2 SUMMARY OF TEST RESULTS ................................................................... 4 2.1 MEASUREMENT UNCERTAINTY ................................................................. 4 3 GENERAL INFORMATION ............................................................................ 5 3.1 GENERAL DESCRIPTION OF EUT .............................................................. 5 3.2 DESCRIPTION OF TEST MODES ................................................................ 6 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST ........................................... 6 3.2.3 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ................ 7 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................... 8 3.4 DESCRIPTION OF SUPPORT UNITS .......................................................... 8 4 TEST PROCEDURE AND RESULT .............................................................. 9 4.1 CONDUCTED EMISSION MEASUREMENT ................................................ 9 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT .............................. 9 4.1.2 TEST INSTRUMENTS .................................................................................. 9 4.1.3 TEST PROCEDURES ................................................................................. 10 4.1.4 DEVIATION FROM TEST STANDARD ....................................................... 10 4.1.5 TEST SETUP ...............................................................................................11 4.1.6 EUT OPERATING CONDITIONS .................................................................11 4.1.7 TEST RESULTS .......................................................................................... 12 4.2 RADIATED EMISSION MEASUREMENT ................................................... 14 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT ................................. 14 4.2.2 TEST INSTRUMENT ................................................................................... 15 4.2.3 TEST PROCEDURE ................................................................................... 16 4.2.4 DEVIATION FROM TEST STANDARD ....................................................... 16 4.2.5 TEST SETUP .............................................................................................. 17 4.2.6 EUT OPERATING CONDITION .................................................................. 17 4.2.7 TEST RESULT ............................................................................................ 18 4.2.8 TEST RESULTS (SPECTRUM BANDWIDTH) ............................................ 20 5 PHOTOGRAPHS OF THE TEST CONFIGURATION .................................. 21 6 INFORMATION ON THE TESTING LABORATORIES ................................ 22 7 APPENDIX A – MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB ....................................................... 23 Report No.: RF980615A03 2 Report Format Version 3.0.0

1 CERTIFICATION PRODUCT: Pen & Touch Tablet BRAND NAME: WACOM MODEL NO.: CTH-461, CTH-460, CTH-661 APPLICANT: PRIMAX ELECTRONICS LTD. TESTED: July 13 ~ 17, 2009 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 15, Subpart C (Section 15.209), ANSI C63.4 -2003 The above equipment (model: CTH-461) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: July 22, 2009 ( Jessica Cheng / Specialist ) TECHNICAL ACCEPTANCE : , DATE: July 22, 2009 Responsible for RF ( Jamison Chan / Supervisor ) APPROVED BY : , DATE: July 22, 2009 ( Ken Liu / Assistant Manager) Report No.: RF980615A03 3 Report Format Version 3.0.0

2 SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications: APPLIED STANDARD: FCC Part 15, Subpart C STANDARD TEST TYPE RESULT REMARK PARAGRAPH Meet the requirement of limit. 15.207 Conducted Emission Test PASS Minimum passing margin is –19.63dB at 0.216MHz. Meet the requirement of limit. 15.209 Radiated Emission Test PASS Minimum passing margin is –4.38dB at 47.495MHz. 2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. MEASUREMENT UNCERTAINTY Conducted emissions 2.44 dB Radiated emissions 3.72 dB Report No.: RF980615A03 4 Report Format Version 3.0.0

3 GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT PRODUCT Pen & Touch Tablet MODEL NO. CTH-461, CTH-460, CTH-661 FCC ID EMJTCTH661 POWER SUPPLY 5Vdc from PC MODULATION TYPE FSK CARRIER FREQUENCY 666kHz OF EACH CHANNEL NUMBER OF CHANNEL 1 ANTENNA TYPE Integral antenna DATA CABLE Shielded USB cable (1.5m) I/O PORTS N/A ASSOCIATED DEVICES Refer to note 1 as below NOTE: 1. The EUT is the ideal tool to enhance your presentations and documents. The pen (Brand: WACOM, Model: LP-160E for model CH-460; Brand: WACOM, Model: LP-161E for model CTH-461, CTH-661) will be sold together with the EUT. 2. The EUT has several models, which are identical to each other except for outer appearance differences only, as follows: Model No. Differences CTH-461 CTH-460 outer appearance differences CTH-661 During the test, model no.: CTH-461 was selected as the representative one for the test and only its test data were recorded in this report. 3. For a more detailed features description, please refer to the manufacturer's specifications or the User's Manual. Report No.: RF980615A03 5 Report Format Version 3.0.0

3.2 DESCRIPTION OF TEST MODES 1 channel was provided to this EUT Channel Frequency (MHz) 1 666kHz 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST Adapter Modem Notebook Printer USB Cable (1.5m) Test table EUT EUT (pen) (Powered from host equipment) Report No.: RF980615A03 6 Report Format Version 3.0.0

3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL EUT Applicable to CONFIGURE Description MODE PLC RE<1G - √ √ - Where PLC: Power Line Conducted Emission RE<1G RE: Radiated Emission below 1GHz POWER LINE CONDUCTED EMISSION TEST: Following channel(s) was (were) selected for the final test as listed below. AVAILABLE CHANNEL TESTED CHANNEL MODULATION TYPE 1 1 FSK RADIATED EMISSION TEST (BELOW 1 GHZ): Following channel(s) was (were) selected for the final test as listed below. AVAILABLE CHANNEL TESTED CHANNEL MODULATION TYPE 1 1 FSK Report No.: RF980615A03 7 Report Format Version 3.0.0

3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS The EUT is a RF product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C. (15.209) ANSI C63.4 -2003 All test items have been performed and recorded as per the above standards. NOTE: The product has been verified to comply with the requirements of FCC Part 15, Subpart B, Class B (DoC). The test report has been issued separately. 3.4 DESCRIPTION OF SUPPORT UNITS The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. NO. PRODUCT BRAND MODEL NO. SERIAL NO. FCC ID 1 PRINTER EPSON LQ-300+ DCGY017054 FCC DoC Approved 2 MODEM ACEEX 1414 980020520 IFAXDM1414 NOTEBOOK 3 DELL PP05L 20375526736 FCC DoC Approved COMPUTER NO. SIGNAL CABLE DESCRIPTION OF THE ABOVE SUPPORT UNITS 1.8m braid shielded wire, terminated with DB25 and Centronics connector via metallic 1 frame, w/o core 1.2 m braid shielded wire, terminated with DB25 and DB9 connector via metallic frame, 2 w/o core. 3 N/A NOTE: All power cords of the above support units are non shielded (1.8m). Report No.: RF980615A03 8 Report Format Version 3.0.0

4 TEST PROCEDURE AND RESULT 4.1 CONDUCTED EMISSION MEASUREMENT 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT FREQUENCY OF EMISSION (MHz) CONDUCTED LIMIT (dBµV) Quasi-peak Average 0.15-0.5 66 to 56 56 to 46 0.5-5 56 46 5-30 60 50 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50 MHz. 3. All emanations from a class A/B digital device or system, including any network of conductors and apparatus connected thereto, shall not exceed the level of field strengths specified above. 4.1.2 TEST INSTRUMENTS DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL ROHDE & SCHWARZ ESCS 30 838251/021 Mar. 05, 2009 Mar. 04, 2010 Test Receiver ROHDE & SCHWARZ Artificial Mains Network ESH3-Z5 100218 Nov. 26, 2008 Nov. 25, 2009 (for EUT) LISN With Adapter AD10 C10Ada-001 Nov. 26, 2008 Nov. 25, 2009 (for EUT) ROHDE & SCHWARZ Artificial Mains Network ESH3-Z5 100219 Nov. 20, 2008 Nov. 19, 2009 (for peripherals) Software ADT_Cond_V7.3.7 NA NA NA Software ADT_ISN_V7.3.7 NA NA NA RF cable (JYEBAO) 5D-FB Cable-C10.01 Feb. 26, 2009 Feb. 25, 2010 SUHNER Terminator (For ROHDE & 65BNC-5001 E1-010773 Feb. 27, 2009 Feb. 26, 2010 SCHWARZ LISN) NOTE: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in Shielded Room No. 10. 3. The VCCI Site Registration No. C-1852. Report No.: RF980615A03 9 Report Format Version 3.0.0

4.1.3 TEST PROCEDURES a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The frequency range from 150kHz to 30MHz was searched. Emission levels under (Limit - 20dB) were not recorded. 4.1.4 DEVIATION FROM TEST STANDARD No deviation Report No.: RF980615A03 10 Report Format Version 3.0.0

4.1.5 TEST SETUP V e r t ic a l G r o u n d R e fe re n c e P la n e T e s t R e c e iv e r EUT 40cm 80cm L IS N H o r iz o n t a l G r o u n d R e fe re n c e P la n e N o te : 1 .S u p p o rt u n its w e re c o n n e c te d to s e c o n d L IS N . 2 . B o t h o f L I S N s ( A M N ) a r e 8 0 c m f r o m E U T a n d a t le a s t 8 0 c m f r o m o t h e r u n it s a n d o t h e r m e t a l p l a n e s s u p p o r t u n i t s . For the actual test configuration, please refer to the related item – Photographs of the Test Configuration. 4.1.6 EUT OPERATING CONDITIONS a. Connected the Touch Tablet (EUT) to Notebook via USB cable. b. Turned on the power of all equipment. c. Notebook ran a test program to enable all functions. d. Set the EUT under transmission/receiving condition continuously at specific channel frequency. e. Notebook read and wrote messages from HDD. f. Notebook sent messages to printer and the printer printed them out. g. Notebook sent messages to modem. h. Steps e-h were repeated. Report No.: RF980615A03 11 Report Format Version 3.0.0

4.1.7 TEST RESULTS TEST MODE Operating 6dB BANDWIDTH 9 kHz INPUT POWER 120Vac, 60 Hz PHASE Line 1 (SYSTEM) ENVIRONMENTAL 27deg. C, 77% RH, TESTED BY Jamison Chan CONDITIONS 1003hPa Emission Freq. Corr. Reading Value Limit Margin Level No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.185 0.12 37.25 - 37.37 - 64.25 54.25 -26.88 - 2 0.213 0.13 42.65 - 42.78 - 63.11 53.11 -20.33 - 3 0.318 0.18 31.64 - 31.82 - 59.76 49.76 -27.94 - 4 0.661 0.23 26.84 - 27.07 - 56.00 46.00 -28.93 - 5 1.984 0.28 27.19 - 27.47 - 56.00 46.00 -28.53 - 6 9.039 0.60 25.63 - 26.23 - 60.00 50.00 -33.77 - REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value. Report No.: RF980615A03 12 Report Format Version 3.0.0

TEST MODE Operating 6dB BANDWIDTH 9 kHz INPUT POWER 120Vac, 60 Hz PHASE Line 2 (SYSTEM) ENVIRONMENTAL 27deg. C, 77% RH, TESTED BY Jamison Chan CONDITIONS 1003hPa Emission Freq. Corr. Reading Value Limit Margin Level No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.185 0.09 37.05 - 37.14 - 64.25 54.25 -27.11 - 2 0.216 0.10 43.23 - 43.33 - 62.96 52.96 -19.63 - 3 0.330 0.16 33.09 - 33.25 - 59.46 49.46 -26.21 - 4 0.660 0.21 21.13 - 21.34 - 56.00 46.00 -34.66 - 5 1.922 0.25 25.50 - 25.75 - 56.00 46.00 -30.25 - 6 9.980 0.52 26.30 - 26.82 - 60.00 50.00 -33.18 - REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value. Report No.: RF980615A03 13 Report Format Version 3.0.0

4.2 RADIATED EMISSION MEASUREMENT 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT FOR FREQUENCY BELOW 30MHz FREQUENCY FIELD STRENGTH (dBuV/m) MEASUREMENT DISTANCE (MHz) uV/m dBuV/m (meters) 0.009 – 0.490 2400 / F (kHz) 48.52-13.80 300 0.490 – 1.705 24000 / F (kHz) 33.80-22.97 30 1.705 – 30.0 30 29.54 30 FOR FREQUENCY BETWEEN 30-1000MHz FREQUENCY Class A (at 10m) Class B (at 3m) (MHz) uV/m dBuV/m uV/m dBuV/m 30-88 90 39.1 100 40.0 88-216 150 43.5 150 43.5 216-960 210 46.4 200 46.0 Above 960 300 49.5 500 54.0 FOR FREQUENCY ABOVE 1000MHz FREQUENCY Class A (at 10m) Class B (at 3m) (MHz) PEAK AVERAGE PEAK AVERAGE Above 1000 80.0 60.0 74.0 54.0 Note: (1) The lower limit shall apply at the transition frequencies. (2) Emission level (dBuV/m) = 20 log Emission level (uV/m). (3) All emanation from a class A/B digital device or system, including any network of conductors and apparatus connected thereto, shall not exceed the level of fieldstrengths specified above. Report No.: RF980615A03 14 Report Format Version 3.0.0

4.2.2 TEST INSTRUMENT DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL HP Preamplifier 8447D 2432A03504 May 04, 2009 May 03, 2010 HP Preamplifier 8449B 3008A01924 Sep. 03, 2008 Sep. 02, 2009 HP Preamplifier 8449B 3008A01292 Aug. 06, 2008 Aug. 05, 2009 ROHDE & SCHWARZ ESI7 836697/012 Dec. 04, 2008 Dec. 03, 2009 TEST RECEIVER Schwarzbeck Antenna VULB 9168 137 Apr. 29, 2009 Apr. 28, 2010 Schwarzbeck Antenna VHBA 9123 480 Apr. 21, 2009 Apr. 20, 2010 ADT. Turn Table TT100 0306 NA NA ADT. Tower AT100 0306 NA NA ADT_Radiated_V Software NA NA NA 7.6.15.9.2 CABLE-CH6-17m SUHNER RF cable SF104-26.5 Aug. 22, 2008 Aug. 21, 2009 -01 ROHDE & SCHWARZ FSP 40 100036 Apr. 03, 2009 Apr. 02, 2010 Spectrum Analyzer Loop Antenna R & S HFH2-Z2 100070 Jan. 14, 2009 Jan. 13, 2010 NOTE: 1. The calibration interval of the above test instruments is 12 months. And the calibrations are traceable to NML/ROC and NIST/USA. 2. The horn antenna and HP preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 3. The test was performed in Chamber No. 6. 4. The Industry Canada Reference No. IC 7450E-6. 5. The FCC Site Registration No. is 447212. Report No.: RF980615A03 15 Report Format Version 3.0.0

4.2.3 TEST PROCEDURE a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter semi-anechoic chamber. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. f. If the emission level of the EUT in peak mode was lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions would be re-tested one by one using peak, quasi-peak method or average method as specified and then reported in data sheet. g. For measurement of frequency above 1000 MHz, the EUT was set 3 meters away from the interference antenna and the detect function was set to Peak or Average. 4.2.4 DEVIATION FROM TEST STANDARD No deviation Report No.: RF980615A03 16 Report Format Version 3.0.0

4.2.5 TEST SETUP For the actual test configuration, please refer to the related item in this test report - Photographs of the Test Configuration. 4.2.6 EUT OPERATING CONDITION Same as item 4.1.6. Report No.: RF980615A03 17 Report Format Version 3.0.0

4.2.7 TEST RESULT TEST MODE Operating FREQUENCY RANGE 9 kHz ~ 30 MHz INPUT POWER DETECTOR 120Vac, 60 Hz Quasi-Peak (SYSTEM) FUNCTION ENVIRONMENTAL 25deg. C, 55% RH, TESTED BY Nick Chen CONDITIONS 1002hPa ANTENNA POLARITY & TEST DISTANCE: AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 0.666 61.33 QP 71.13 -9.80 1.00 327 42.17 19.16 2 2.000 46.43 QP 69.54 -23.11 1.00 321 26.88 19.55 3 3.332 40.18 QP 69.54 -29.36 1.00 342 20.64 19.54 4 4.669 36.49 QP 69.54 -33.05 1.00 330 16.93 19.56 5 6.001 34.03 QP 69.54 -35.51 1.00 335 14.43 19.60 6 7.341 31.07 QP 69.54 -38.47 1.00 347 11.42 19.65 7 8.667 30.80 QP 69.54 -38.74 1.00 311 11.08 19.72 REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. 5. Above limits have been translated by the formula 6. Loop antenna was used for all radiated emission below 30MHz. The measured field strength was extrapolated to distance 30 meters, using the formula that the limit of field strength varies as the inverse distance square (40dB per decade of distance) Example: 24000/666kHz =36.03 uV/m 30m =31.13 dBuV/m 30m 2 =31.13+20log(30/3) 3m =71.13 dBuV/m Report No.: RF980615A03 18 Report Format Version 3.0.0

TEST MODE Operating FREQUENCY RANGE 30-1000MHz INPUT POWER DETECTOR 120Vac, 60 Hz Quasi-Peak (SYSTEM) FUNCTION ENVIRONMENTAL 25deg. C, 55% RH, TESTED BY Nick Chen CONDITIONS 1002hPa ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 47.495 29.82 QP 40.00 -10.18 1.14 H 118 16.60 13.22 2 107.756 31.44 QP 43.50 -12.06 1.22 H 229 21.59 9.85 3 156.353 30.88 QP 43.50 -12.62 1.07 H 247 16.72 14.16 4 191.343 35.38 QP 43.50 -8.12 1.12 H 241 23.61 11.77 5 216.613 36.79 QP 46.00 -9.21 1.15 H 208 24.96 11.83 6 346.854 34.13 QP 46.00 -11.87 1.06 H 82 17.50 16.63 7 865.872 36.70 QP 46.00 -9.30 1.00 H 232 9.10 27.60 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 47.495 35.62 QP 40.00 -4.38 1.00 V 310 22.40 13.22 2 72.766 25.04 QP 40.00 -14.96 1.00 V 187 13.53 11.51 3 109.699 31.38 QP 43.50 -12.12 1.00 V 286 21.29 10.09 4 199.118 29.27 QP 43.50 -14.23 1.00 V 274 17.99 11.28 5 346.854 30.90 QP 46.00 -15.10 1.00 V 175 14.27 16.63 6 465.431 30.39 QP 46.00 -15.61 1.00 V 256 10.31 20.07 7 731.743 35.01 QP 46.00 -10.99 1.05 V 262 9.57 25.44 8 865.872 40.09 QP 46.00 -5.91 1.17 V 247 12.49 27.60 REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. Report No.: RF980615A03 19 Report Format Version 3.0.0

4.2.8 TEST RESULTS (SPECTRUM BANDWIDTH) 666kHz Report No.: RF980615A03 20 Report Format Version 3.0.0

5 PHOTOGRAPHS OF THE TEST CONFIGURATION Please refer to the attached file (Test Setup Photo). Report No.: RF980615A03 21 Report Format Version 3.0.0

6 INFORMATION ON THE TESTING LABORATORIES We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved by the following approval agencies according to ISO/IEC 17025. USA FCC, NVLAP Germany TUV Rheinland Japan VCCI Norway NEMKO Canada INDUSTRY CANADA, CSA R.O.C. TAF, BSMI, NCC Netherlands Telefication Singapore GOST-ASIA(MOU) Russia CERTIS(MOU) Copies of accreditation certificates of our laboratories obtained from approval agencies can be downloaded from our web site: www.adt.com.tw/index.5/phtml. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab: Hsin Chu EMC/RF Lab: Tel: 886-2-26052180 Tel: 886-3-5935343 Fax: 886-2-26051924 Fax: 886-3-5935342 Hwa Ya EMC/RF/Safety Telecom Lab: Tel: 886-3-3183232 Fax: 886-3-3185050 Web Site: www.adt.com.tw The address and road map of all our labs can be found in our web site also. Report No.: RF980615A03 22 Report Format Version 3.0.0

7 APPENDIX A – MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB No any modifications are made to the EUT by the lab during the test. ---END--- Report No.: RF980615A03 23 Report Format Version 3.0.0


Document Created: 2009-08-05 17:50:39
Document Modified: 2009-08-05 17:50:39
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC