test report

FCC ID: EMJMMORFE3UL

Test Report

Download: PDF
FCCID_1142557

Reference No.: Report No.: SZ090703B02-RP(Mouse) FCC TEST REPORT for Rocketfish 2.4GHz Ergo laser mouse MODEL: RF-MSE14 Brand Name: Bestbuy/Rocketfish/Primax Test Report Number: SZ090703B02-RP Issued for Primax Electronics Ltd. No. 669, Ruey Kuang Road, Neihu 114 Taipei, Taiwan. R.O.C. Issued by: COMPLIANCE CERTIFICATION SERVICES (SHENZHEN) INC. No10-1, Mingkeda Logistics Park, No.18 Huanguan South RD. Guan lan Town, Baoan District, Shenzhen China TEL: 86-755-28055000 FAX: 86-755-28055221 Issued Date: July 14, 2009 Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by TAF, A2LA, NVLAP, NIST or any government agencies. The test results in the report only apply to the tested sample. FCC ID : EMJMMORFE3UL Page 1 / 26

Reference No.: Report No.: SZ090703B02-RP(Mouse) Revision History Issue Effect Rev. Date Revisions Page Revised By 00 July 14, 2009 Initial Issue ALL Clinton Kao FCC ID : EMJMMORFE3UL Page 2 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Reference No.: Report No.: SZ090703B02-RP(Mouse) TABLE OF CONTENTS 1 TEST CERTIFICATION........................................................................................... 4 2 EUT DESCRIPTION................................................................................................ 5 3 TEST METHODOLOGY.......................................................................................... 6 3.1. DESCRIPTION OF TEST MODES ...................................................................................... 6 4 TEST METHODOLOGY.......................................................................................... 7 4.1. EUT EXERCISE...................................................................................................................7 4.2. FCC PART 15.205 RESTRICTED BANDS OF OPERATIONS ........................................... 7 5 INSTRUMENT CALIBRATION ............................................................................... 8 6 SETUP OF EQUIPMENT UNDER TEST ................................................................ 8 6.1. DESCRIPTION OF SUPPORT UNITS................................................................................. 8 6.2. CONFIGURATION OF SYSTEM UNDER TEST ................................................................. 8 7 FACILITIES AND ACCREDITATIONS ................................................................... 9 7.1. FACILITIES .......................................................................................................................... 9 7.2. ACCREDITATIONS ............................................................................................................. 9 7.3. MEASUREMENT UNCERTAINTY....................................................................................... 9 8 FCC PART 15.249 REQUIREMENTS................................................................... 10 8.1. BAND EDGES MEASUREMENT....................................................................................... 10 8.2. POWER LINE CONDUCTED EMISSIONS MEASUREMENT........................................... 16 8.3. SPURIOUS EMISSIONS MEASUREMENT....................................................................... 19 FCC ID : EMJMMORFE3UL Page 3 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Reference No.: Report No.: SZ090703B02-RP(Mouse) 1 TEST CERTIFICATION Product: Rocketfish 2.4GHz Ergo laser mouse Model: RF-MSE14 Brand: Bestbuy/Rocketfish/Primax Tested: July 05-14, 2009 Applicant: Primax Electronics Ltd. No. 669, Ruey Kuang Road, Neihu 114 Taipei, Taiwan. R.O.C. Manufacturer: Dongguan Primax Electronic & Telecommunication Products Ltd. Liu Wu District, Shek Kit Town, Dongguan City, Guang Dong Province, P.R. China APPLICABLE STANDARDS STANDARD TEST RESULT FCC 47 CFR Part 15 Subpart C No non-compliance noted DEVIATION FROM APPLICABLE STANDARD None We hereby certify that: The above equipment was tested by Compliance Certification Services Inc. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4:2003 and the energy emitted by the sample EUT tested as described in this report is in compliance with the requirements of FCC Rules Part 15.207, 15.209, 15.249. The test results of this report relate only to the tested sample EUT identified in this report. Approved by: Reviewed by: Clinton Kao Vincent Yao Manager Assistant manager Compliance Certification Service Inc. Compliance Certification Service Inc. FCC ID : EMJMMORFE3UL Page 4 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Reference No.: Report No.: SZ090703B02-RP(Mouse) 2 EUT DESCRIPTION Product Rocketfish 2.4GHz Ergo laser mouse Trade Name Bestbuy/Rocketfish/Primax Model Number RF-MSE14 Model Discrepancy N/A Serial Number SZ090703B02-RP Power Supply DC1.5V supplied by the battery Frequency Range 2402-2474MHz Transmit Power 88.88 dBuV/m (Max.) Modulation Technique GFSK Number of Channels 13 Channel Antenna Specification PCB Antenna with 3.85 dBi gain(Max) Note: 1. The sample selected for test was engineering sample that approximated to production product and was provided by manufacturer. 2. This submittal(s) (test report) is intended for FCC ID: EMJMMORFE3UL filing to comply with Section 15.207, 15.209 and 15.249 of the FCC Part 15, Subpart C Rules. FCC ID : EMJMMORFE3UL Page 5 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Reference No.: Report No.: SZ090703B02-RP(Mouse) 3 TEST METHODOLOGY 3.1. DESCRIPTION OF TEST MODES The EUT had been tested under operating condition. After verification, all tests were carried out with the worst case test modes as shown below except radiated spurious emission below 1GHz, which worst case was in normal link mode only. Channel Low (2402MHz), Channel Mid (2438MHz) and Channel High (2474MHz) were chosen for the final testing. FCC ID : EMJMMORFE3UL Page 6 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Reference No.: Report No.: SZ090703B02-RP(Mouse) 4 TEST METHODOLOGY The tests documented in this report were performed in accordance with ANSI C63.4:2003 and FCC CFR 15.209 and 15.249. 4.1. EUT EXERCISE The EUT was operated in the engineering mode to fix the TX frequency that was for the purpose of the measurements. According to its specifications, the EUT must comply with the requirements of the Section 15.109 under the FCC Rules Part 15 Subpart B and Section 15.209,15.249 under the FCC Rules Part 15 Subpart C. 4.2. FCC PART 15.205 RESTRICTED BANDS OF OPERATIONS (a) Except as shown in paragraph (d) of this section, only spurious emissions are permitted in any of the frequency bands listed below: MHz MHz MHz GHz 0.090 - 0.110 16.42 - 16.423 399.9 - 410 4.5 - 5.15 1 0.495 - 0.505 16.69475 - 16.69525 608 - 614 5.35 - 5.46 2.1735 - 2.1905 16.80425 - 16.80475 960 - 1240 7.25 - 7.75 4.125 - 4.128 25.5 - 25.67 1300 - 1427 8.025 - 8.5 4.17725 - 4.17775 37.5 - 38.25 1435 - 1626.5 9.0 - 9.2 4.20725 - 4.20775 73 - 74.6 1645.5 - 1646.5 9.3 - 9.5 6.215 - 6.218 74.8 - 75.2 1660 - 1710 10.6 - 12.7 6.26775 - 6.26825 108 - 121.94 1718.8 - 1722.2 13.25 - 13.4 6.31175 - 6.31225 123 - 138 2200 - 2300 14.47 - 14.5 8.291 - 8.294 149.9 - 150.05 2310 - 2390 15.35 - 16.2 8.362 - 8.366 156.52475 - 2483.5 - 2500 17.7 - 21.4 8.37625 - 8.38675 156.52525 2655 - 2900 22.01 - 23.12 8.41425 - 8.41475 156.7 - 156.9 3260 - 3267 23.6 - 24.0 12.29 - 12.293 162.0125 - 167.17 3332 - 3339 31.2 - 31.8 12.51975 - 12.52025 167.72 - 173.2 3345.8 - 3358 36.43 - 36.5 12.57675 - 12.57725 240 - 285 3600 - 4400 ( 2) 13.36 - 13.41 322 - 335.4 1 Until February 1, 1999, this restricted band shall be 0.490-0.510 MHz. 2 Above 38.6 (b) Except as provided in paragraphs (d) and (e), the field strength of emissions appearing within these frequency bands shall not exceed the limits shown in Section 15.209. At frequencies equal to or less than 1000 MHz, compliance with the limits in Section 15.209 shall be demonstrated using measurement instrumentation employing a CISPR quasi-peak detector. Above 1000 MHz, compliance with the emission limits in Section 15.209 shall be demonstrated based on the average value of the measured emissions. The provisions in Section 15.35 apply to these measurements. FCC ID : EMJMMORFE3UL Page 7 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Reference No.: Report No.: SZ090703B02-RP(Mouse) 5 INSTRUMENT CALIBRATION The measuring equipment, which was utilized in performing the tests documented herein, has been calibrated in accordance with the manufacturer's recommendations for utilizing calibration equipment, which is traceable to recognized national standards. 6 SETUP OF EQUIPMENT UNDER TEST 6.1. DESCRIPTION OF SUPPORT UNITS The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. Trade No. Equipment Model No. Serial No. FCC ID Data Cable Power Cord Name Unshielded, 1 Notebook 2672 992F2VG DoC IBM N/A 2.00m Rocketfish 2 2.4GHz Nano RF-MSE14A N/A EMJDMORFE3UL Primax N/A N/A dongle Note: 1) All the equipment/cables were placed in the worst-case configuration to maximize the emission during the test. 2) Grounding was established in accordance with the manufacturer’s requirements and conditions for the intended use. 6.2. CONFIGURATION OF SYSTEM UNDER TEST See test photographs attached in Appendix II for the actual connections between EUT and support equipment. FCC ID : EMJMMORFE3UL Page 8 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Reference No.: Report No.: SZ090703B02-RP(Mouse) 7 FACILITIES AND ACCREDITATIONS 7.1. FACILITIES All measurement facilities used to collect the measurement data are located at No10-1, Mingkeda Logistics Park, No.18 Huanguan South RD. Guan lan Town, Baoan District, Shenzhen China The sites are constructed in conformance with the requirements of ANSI C63.4:2003, ANSI C63.7 and CISPR Publication 22. All receiving equipment conforms to CISPR Publication 16-1, “Radio Interference Measuring Apparatus and Measurement Methods.” 7.2. ACCREDITATIONS Our laboratories are accredited and approved by the following accreditation body according to ISO/IEC 17025. Taiwan TAF The measuring facility of laboratories has been authorized or registered by the following approval agencies. USA FCC Japan VCCI Canada INDUSTRY CANADA Taiwan BSMI Norway Nemko Copies of granted accreditation certificates are available for downloading from our web site, http://www.ccsrf.com 7.3. MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: Measurement Frequency Uncertainty Conducted emissions 9kHz~30MHz +/- 3.18dB 30MHz ~ 200MHz +/- 3.79dB Radiated emissions 200MHz ~1000MHz +/- 3.62dB This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. The measured result is above (below) the specification limit by a margin less than the measurement uncertainty; it is therefore not possible to state compliance based on the 95% level of confidence. However, the result indicates that compliance (non-compliance) is more probable than non-compliance) with the specification limit. FCC ID : EMJMMORFE3UL Page 9 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Reference No.: Report No.: SZ090703B02-RP(Mouse) 8 FCC PART 15.249 REQUIREMENTS 8.1. BAND EDGES MEASUREMENT LIMIT 1. In the above emission table, the tighter limit applies at the band edges. Field Strength Field Strength Frequency (Hz) (μV/m at 3-meter) (dBμV/m at 3-meter) 30-88 100 40 88-216 150 43.5 216-960 200 46 Above 960 500 54 2. As shown in Section 15.35(b), for frequencies above 1000 MHz, the above field strength limits in paragraphs (a) and (b) of this section are based on average limits. However, the peak field strength of any emission shall not exceed the maximum permitted average limits specified above by more than 20 dB under any condition of modulation. For point-to-point operation under paragraph (b) of this section, the peak field strength shall not exceed 2500 millivolts/meter at 3 meters along the antenna azimuth. 3. As shown in Section 15.249(d) Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated emission limits in Section 15.209, whichever is the lesser attenuation. MEASUREMENT EQUIPMENT USED 966 RF CHAMBER (2) EQUIPMENT MODEL SERIAL LAST CAL. MFR TYPE NUMBER NUMBER CAL. DUE ESCI EMI TEST ROHDE&SCHWARZ 1166.5950 03 100783 03/20/2009 03/20/2010 RECEIVE.ESCI Spectrum Analyzer Agilent E4446A US44300399 03/01/2009 03/01/2010 Low Noise Amplifier MITEQ AM-1604-3000 1123808 02/06/2009 02/06/2010 Turn Table EMCO 2081-1.21 N/A N.C.R N.C.R Controller CT N/A N/A N.C.R N.C.R High Noise Amplifier Agilent 8449B 3008A01838 05/29/2009 05/29/2010 Site NSA C&C N/A N/A N.C.R N.C.R BILOG ANTENNA SCHAFFNER CBL6143 5082 06/08/2008 06/09/2009 Horn Antenna SCHAFFNER BBHA9120D 1201 03/19/2009 03/19/2010 Signal Generator Anritsu MG3694A #050125 03/01/2009 03/01/2010 Remark: Each piece of equipment is scheduled for calibration once a year. FCC ID : EMJMMORFE3UL Page 10 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Reference No.: Report No.: SZ090703B02-RP(Mouse) Test Configuration Antenna tower 3m Horn antenna EUT 4m Spectrum analyzer Turntable 1m 0.8m Pre-amp TEST PROCEDURE 1. The EUT is placed on a turntable, which is 0.8m above the ground plane. 2. The turntable shall be rotated for 360 degrees to determine the position of maximum emission level. 3. EUT is set 3m away from the receiving antenna, which is varied from 1m to 4m to find out the highest emission. 4. Set the spectrum analyzer in the following setting in order to capture the lower and upper band-edges of the emission: (a) PEAK: RBW=VBW=1MHz / Sweep=AUTO (b) AVERAGE: RBW=1MHz / VBW=10Hz / Sweep=AUTO 5. Repeat the procedures until all the PEAK and AVERAGE versus POLARIZATION are measured. TEST RESULTS Refer to attach spectrum analyzer data chart. FCC ID : EMJMMORFE3UL Page 11 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Reference No.: Report No.: SZ090703B02-RP(Mouse) Test Data Band Edges (CH-Low) Detector mode: Peak Polarity: Vertical Detector mode: Average Polarity: Vertical FCC ID : EMJMMORFE3UL Page 12 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Reference No.: Report No.: SZ090703B02-RP(Mouse) Detector mode: Peak Polarity: Horizontal Detector mode: Average Polarity: Horizontal FCC ID : EMJMMORFE3UL Page 13 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Reference No.: Report No.: SZ090703B02-RP(Mouse) Band Edges (CH-High) Detector mode: Peak Polarity: Vertical Detector mode: Average Polarity: Vertical FCC ID : EMJMMORFE3UL Page 14 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Reference No.: Report No.: SZ090703B02-RP(Mouse) Detector mode: Peak Polarity: Horizontal Detector mode: Average Polarity: Horizontal FCC ID : EMJMMORFE3UL Page 15 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Reference No.: Report No.: SZ090703B02-RP(Mouse) 8.2. POWER LINE CONDUCTED EMISSIONS MEASUREMENT 8.2.1. LIMITS OF CONDUCTED EMISSIONS MEASUREMENT According to §15.207(a), except as shown in paragraphs (b) and (c) of this section, for an intentional radiator that is designed to be connected to the public utility (AC) power line, the radio frequency voltage that is conducted back onto the AC power line on any frequency or frequencies within the band 150 kHz to 30 MHz shall not exceed the limits in the following table, as measured using a 50 µH/50 ohms line impedance stabilization network (LISN). Compliance with the provisions of this paragraph shall be based on the measurement of the radio frequency voltage between each power line and ground at the power terminal. The lower limit applies at the boundary between the frequency ranges. Limits Frequency Range (dBμV) (MHz) Quasi-peak Average 0.15 to 0.50 66 to 56* 56 to 46* 0.50 to 5 56 46 5 to 30 60 50 NOTE: (1) The lower limit shall apply at the transition frequencies. (2) The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50 MHz. (3) All emanations from a class A/B digital device or system, including any network of conductors and apparatus connected thereto, shall not exceed the level of field strengths specified above. TEST INSTRUMENTS Conducted Emission Test Site EQUIPMENT MODEL SERIAL LAST CAL. MFR TYPE NUMBER NUMBER CAL. DUE ESCI EMI TEST ROHDE&SCHWARZ 1166.5950 03 100145 03/20/2009 03/20/2010 RECEIVE.ESCI LISN FCC FCC-LISN-50-50-2-M 01068 03/01/2009 03/01/2010 LISN EMCO 3825/2 8901-1459 03/01/2009 03/01/2010 CDN FCC FCC-TILISN-T4 20182 03/01/2009 03/01/2010 CDN FCC FCC-TLISN-T8-02 20183 03/01/2009 03/01/2010 CDN FCC FCC-TLISN-T4-02 20382 03/01/2009 03/01/2010 CDN FCC FCC-TLISN-T4-02 20383 03/01/2009 03/01/2010 CDN FCC FCC-801-T8-RJ45 04030 03/01/2009 03/01/2010 STODDART Current Probe 91550-1 345-73 03/01/2009 03/01/2010 AIRCRAFT NOTE: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. N.C.R = No Calibration Request. FCC ID : EMJMMORFE3UL Page 16 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Reference No.: Report No.: SZ090703B02-RP(Mouse) 8.2.2. TEST PROCEDURES (please refer to measurement standard) The EUT and Support equipment, if needed, was placed on a non-conducted table, which is 0.8m above the ground plane and 0.4m away from the conducted wall. The test equipment EUT installed received AC main power, through a Line Impedance Stabilization Network (LISN), which supplied power source and was grounded to the ground plane. All support equipment power received from a second LISN. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the measuring instrument. The EUT test program was started. Emissions were measured on each current carrying line of the EUT using an EMI Test Receiver connected to the LISN powering the EUT. The frequency range from 150 kHz to 30 MHz was searched. The test data of the worst-case condition(s) was recorded. Emission levels under limit 20dB were not recorded. FCC ID : EMJMMORFE3UL Page 17 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Reference No.: Report No.: SZ090703B02-RP(Mouse) 8.2.3. TEST SETUP Vert. reference plane EMI receiver 40cm EUT 80cm LISN Reference ground plane For the actual test configuration, please refer to the related item – Photographs of the Test Configuration. 8.2.4. Data Sample: PEAK Q.P. AVG Q.P. AVG Q.P. AVG FREQ RAW RAW RAW Limit Limit Margin Margin Note MHz dBuV dBuV dBuV dBuV dBuV dB dB x.xx 50.27 49.16 48.17 65.47 55.47 -16.31 -7.30 L Freq. = Emission frequency in MHz RAW dBuV = Uncorrected Analyzer/Received Reading +INSERTION LOSS of LISN+CABLE LOSS+pulse limiter loss Q.P. Limit dBuV = Limit stated in standard AVG Limit dBuV = Limit stated in standard Q.P. Margin dB = Q.P. RAW (dBuV) –Q.P. Limit (dBuV) AVG Margin dB = AVG RAW (dBuV) –AVG Limit (dBuV) Note = Current carrying line of reading Q.P.: =Quasi-Peak 8.2.5. TEST RESULTS Not applicable, since the EUT is powered by the battery. FCC ID : EMJMMORFE3UL Page 18 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Reference No.: Report No.: SZ090703B02-RP(Mouse) 8.3. SPURIOUS EMISSIONS MEASUREMENT 8.3.1. LIMITS OF RADIATED EMISSIONS MEASUREMENT 1. In the section 15.249(a): Except as provided in paragraph (b) of this section, the field strength of emissions from intentional radiators operated within these frequency bands shall comply with the following: Fundamental Field Strength of Fundamental Field Strength of Harmonics Frequency Field Strength (mV/m) (μV/m) 902-928 MHz 50 500 2400 - 2483.5 MHz 50 500 5725 - 5875 MHz 50 500 24.0 - 24.25 GHz 250 2500 2. Except as provided elsewhere in this Subpart, the emissions from an intentional radiator shall not exceed the field strength levels specified in the following table: Frequency (MHz) Field Strength (μV/m) Measurement Distance (m) 30-88 100* 3 88-216 150* 3 216-960 200* 3 Above 960 500 3 Remark: Except as provided in paragraph (g), fundamental emissions from intentional radiators operating under this Section shall not be located in the frequency bands 54-72 MHz, 76-88 MHz, 174-216 MHz or 470-806 MHz. However, operation within these frequency bands is permitted under other sections of this Part, e.g., Sections 15.231 and 15.241. 3. In the above emission table, the tighter limit applies at the band edges. Field Strength Field Strength Frequency (Hz) (μV/m at 3-meter) (dBμV/m at 3-meter) 30-88 100 40 88-216 150 43.5 216-960 200 46 Above 960 500 54 FCC ID : EMJMMORFE3UL Page 19 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Reference No.: Report No.: SZ090703B02-RP(Mouse) 8.3.2. TEST INSTRUMENTS 966 RF CHAMBER (2) EQUIPMENT MODEL SERIAL LAST CAL. MFR TYPE NUMBER NUMBER CAL. DUE ESCI EMI TEST ROHDE&SCHWARZ 1166.5950 03 100783 03/20/2009 03/20/2010 RECEIVE.ESCI Spectrum Analyzer Agilent E4446A US44300399 03/01/2009 03/01/2010 Low Noise Amplifier MITEQ AM-1604-3000 1123808 02/06/2009 02/06/2010 Turn Table EMCO 2081-1.21 N/A N.C.R N.C.R Controller CT N/A N/A N.C.R N.C.R High Noise Amplifier Agilent 8449B 3008A01838 05/29/2009 05/29/2010 Site NSA C&C N/A N/A N.C.R N.C.R BILOG ANTENNA SCHAFFNER CBL6143 5082 06/08/2008 06/09/2009 Horn Antenna SCHAFFNER BBHA9120D 1201 03/19/2009 03/19/2010 Signal Generator Anritsu MG3694A #050125 03/01/2009 03/01/2010 NOTE: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The FCC Site Registration number is 101879. 4. N.C.R = No Calibration Required. 8.3.3 TEST PROCEDURE (please refer to measurement standard) 1. The EUT is placed on a turntable, which is 0.8m above ground plane. 2. The turntable shall be rotated for 360 degrees to determine the position of maximum emission level. 3. EUT is set 3m away from the receiving antenna, which is varied from 1m to 4m to find out the highest emissions. 4. Maximum procedure was performed on the six highest emissions to ensure EUT compliance. 5. And also, each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. 6. Set the spectrum analyzer in the following setting as: Below 1GHz: RBW=100kHz / VBW=300kHz / Sweep=AUTO Above 1GHz: (a) PEAK: RBW=VBW=1MHz / Sweep=AUTO (b) AVERAGE: RBW=1MHz / VBW=10Hz / Sweep=AUTO 7. Repeat above procedures until the measurements for all frequencies are complete. FCC ID : EMJMMORFE3UL Page 20 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Reference No.: Report No.: SZ090703B02-RP(Mouse) 8.3.2.1. TEST SETUP Below 1 GHz Antenna tower 3m Bi-log antenna EUT 4m Spectrum analyzer Turntable 1m 0.8m Reference ground plane Above 1 GHz Antenna tower 3m Horn antenna EUT 4m Spectrum analyzer Turntable 1m 0.8m Pre-amp For the actual test configuration, please refer to the related item – Photographs of the Test Configuration. FCC ID : EMJMMORFE3UL Page 21 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Reference No.: Report No.: SZ090703B02-RP(Mouse) 8.3.2.2. Data Sample: Below 1 GHz Reading Correction Result Limit Frequency Ant.Pol. Margin (Remark) Factor (Remark) (Peak) Remark (MHz) (H/V) (dB) (dBuV) (dB/m) (dBuV/m) (dBuV/m) xxx V 12.12 10.21 22.33 40.00 -17.67 Peak Above 1 GHz Reading Reading Correction Result Result Limit Limit Frequency Ant.Pol. Margin (Peak) (Average) Factor (Peak) (Average) (Peak) (Average) Remark (MHz) (H/V) (dB) (dBuV) (dBuV) (dB/m) (dBuV/m) (dBuV/m) (dBuV/m) (dBuV/m) xxx V 65.45 63.00 -11.12 54.33 51.88 74.00 54.00 -2.12 AVG Frequency (MHz) = Emission frequency in MHz Ant.Pol. (H/V) = Antenna polarization Reading (dBuV) = Uncorrected Analyzer / Receiver reading Correction Factor (dB/m) = Antenna factor + Cable loss – Amplifier gain Result (dBuV/m) = Reading (dBuV) + Correction Factor (dB/m) Limit (dBuV/m) = Limit stated in standard Margin (dB) = Remark Result (dBuV/m) – Limit (dBuV/m) Peak = Peak Reading QP = Quasi-peak Reading AVG = Average Reading FCC ID : EMJMMORFE3UL Page 22 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Reference No.: Report No.: SZ090703B02-RP(Mouse) 8.3.2.3. TEST RESULTS Below 1 GHz Operation Mode: Normal Link Test Date: July 08, 2009 Temperature: 24.6°C Tested by: Tom Gan Humidity: 48 % RH Polarity: Ver. / Hor. Safe Freq. Ant.Pol. Detector Reading Factor Actual FS Limit 3m Margin (MHz) H/V Mode (dBuV) (dB) (dBuV/m) (dBuV/m) (dB) (PK/QP) 59.218 V Peak 40.75 -23.08 17.67 40.00 -22.33 102.505 V Peak 43.34 -24.60 18.74 43.50 -24.76 146.332 V Peak 39.24 -22.98 16.26 43.50 -27.24 361.723 V Peak 36.45 -17.01 19.44 46.00 -26.56 617.034 V Peak 31.27 -10.87 20.40 46.00 -25.60 789.579 V Peak 31.63 -8.40 23.23 46.00 -22.77 72.204 H Peak 45.61 -23.70 21.91 40.00 -18.09 98.717 H Peak 40.29 -24.69 15.60 43.50 -27.90 142.004 H Peak 37.44 -23.04 14.40 43.50 -29.10 452.905 H Peak 31.52 -14.08 17.44 46.00 -28.56 569.338 H Peak 31.71 -11.44 20.27 46.00 -25.73 748.897 H Peak 31.21 -8.39 22.82 46.00 -23.18 **Remark: No emission found between lowest internal used/generated frequency to 30 MHz. REMARKS: 1. Measuring frequencies from 30 MHz to the 1GHz. 2. Radiated emissions measured in frequency range from 30 MHz to 1000MHz were made with an instrument using peak/quasi-peak detector mode. 3. Quasi-peak test would be performed if the peak result were greater than the quasi-peak limit or as required by the applicant. 4. Measurements above show only up to 6 maximum emissions noted, or would be lesser, with “ N/A ” remark, if no specific emissions from the EUT are recorded (ie: margin>20dB from the applicable limit) and considered that's already beyond the background noise floor. 5. Margin (dB) = Remark result (dBuV/m) – Quasi-peak limit (dBuV/m). FCC ID : EMJMMORFE3UL Page 23 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Reference No.: Report No.: SZ090703B02-RP(Mouse) Above 1 GHz Operation Mode: TX / CH Low Test Date: July 08, 2009 Temperature: 24.6°C Tested by: Tom Gan Humidity: 48 % RH Polarity: Ver. / Hor. Fundamental Freq. Ant. Pol Peak AV Ant. / CL Peak AV Peak AV Actual Fs (MHz) H/V Reading Reading CF Limit Limit Margin Margin (dBuV) (dBuV) (dB) Peak AV (dBuV/m) (dBuV/m) (dB) (dB) (dBuV/m) (dBuV/m) 2402 V 89.56 34.13 -3.86 85.70 30.27 114 94 -28.30 -63.73 2402 H 91.61 35.24 -3.86 87.75 31.38 114 94 -26.25 -62.62 Freq. Ant. Pol Peak AV Ant. / CL Peak AV Margin Actual Fs (MHz) H/V Reading Reading CF Limit Limit (dB) Remark (dBuV) (dBuV) (dB) Peak AV (dBuV/m) (dBuV/m) (dBuV/m) (dBuV/m) 1486.66 V 56.93 --- -9.49 47.44 --- 74.00 54.00 -6.56 Peak 1666.66 V 55.76 --- -8.10 47.66 --- 74.00 54.00 -6.34 Peak 1946.66 V 56.48 --- -5.88 50.60 --- 74.00 54.00 -3.40 Peak 4466.66 V 45.15 --- 2.09 47.24 --- 74.00 54.00 -6.76 Peak N/A 1530.00 H 56.00 --- -9.18 46.82 --- 74.00 54.00 -7.18 Peak 1740.00 H 56.58 --- -7.52 49.06 --- 74.00 54.00 -4.94 Peak 2183.33 H 56.82 55.64 -4.73 52.09 50.91 74.00 54.00 -3.09 AVG. 4641.66 H 46.58 --- 2.36 48.94 --- 74.00 54.00 -5.06 Peak N/A REMARKS: 1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. Radiated emissions measured in frequency above 1000MHz were made with an instrument using peak/average detector mode. 3. Average test would be performed if the peak result were greater than the average limit or as required by the applicant. 4. Data of measurement within this frequency range shown “ --- ” in the table above means the reading of emissions are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. 5. Measurements above show only up to 6 maximum emissions noted, or would be lesser, with “ N/A ” remark, if no specific emissions from the EUT are recorded (ie: margin>20dB from the applicable limit) and considered that's already beyond the background noise floor. 6. Margin (dB) = Remark result (dBuV/m) – Average limit (dBuV/m). FCC ID : EMJMMORFE3UL Page 24 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Reference No.: Report No.: SZ090703B02-RP(Mouse) Operation Mode: TX / CH Mid Test Date: July 08, 2009 Temperature: 24.6°C Tested by: Tom Gan Humidity: 48% RH Polarity: Ver. / Hor. Fundamental Freq. Ant. Pol Peak AV Ant. / CL Peak AV Peak AV Actual Fs (MHz) H/V Reading Reading CF Limit Limit Margin Margin (dBuV) (dBuV) (dB) Peak AV (dBuV/m) (dBuV/m) (dB) (dB) (dBuV/m) (dBuV/m) 2438 V 90.99 35.84 -3.73 87.26 32.11 114 94 -26.74 -61.89 2438 H 92.14 36.09 -3.73 88.41 32.36 114 94 -25.59 -61.64 Freq. Ant. Pol Peak AV Ant. / CL Peak AV Margin Actual Fs (MHz) H/V Reading Reading CF Limit Limit (dB) Remark (dBuV) (dBuV) (dB) Peak AV (dBuV/m) (dBuV/m) (dBuV/m) (dBuV/m) 1406.66 V 56.08 --- -9.93 46.15 --- 74.00 54.00 -7.85 Peak 1700.00 V 56.22 --- -7.84 48.38 --- 74.00 54.00 -5.62 Peak 2300.00 V 58.25 49.53 -4.27 53.98 45.26 74.00 54.00 -8.74 AVG. 4508.33 V 44.26 --- 2.13 46.39 --- 74.00 54.00 -7.61 Peak N/A 1436.66 H 56.65 --- -9.77 46.88 --- 74.00 54.00 -7.12 Peak 1690.00 H 56.93 --- -7.92 49.01 --- 74.00 54.00 -4.99 Peak 2040.00 H 56.71 --- -5.30 51.41 --- 74.00 54.00 -2.59 Peak 4616.66 H 45.68 --- 2.32 48.00 --- 74.00 54.00 -6.00 Peak N/A REMARKS: 1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. Radiated emissions measured in frequency above 1000MHz were made with an instrument using peak/average detector mode. 3. Average test would be performed if the peak result were greater than the average limit or as required by the applicant. 4. Data of measurement within this frequency range shown “ --- ” in the table above means the reading of emissions are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. 5. Measurements above show only up to 6 maximum emissions noted, or would be lesser, with “ N/A ” remark, if no specific emissions from the EUT are recorded (ie: margin>20dB from the applicable limit) and considered that's already beyond the background noise floor. 6. Margin (dB) = Remark result (dBuV/m) – Average limit (dBuV/m). FCC ID : EMJMMORFE3UL Page 25 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Reference No.: Report No.: SZ090703B02-RP(Mouse) Operation Mode: TX / CH High Test Date: July 08, 2009 Temperature: 24.6°C Tested by: Tom Gan Humidity: 48 % RH Polarity: Ver. / Hor. Fundamental Freq. Ant. Pol Peak AV Ant. / CL Peak AV Peak AV Actual Fs (MHz) H/V Reading Reading CF Limit Limit Margin Margin (dBuV) (dBuV) (dB) Peak AV (dBuV/m) (dBuV/m) (dB) (dB) (dBuV/m) (dBuV/m) 2474 V 92.47 35.31 -3.59 88.88 31.72 114 94 -25.12 -62.28 2474 H 91.24 34.22 -3.59 87.65 30.63 114 94 -26.35 -63.37 Freq. Ant. Pol Peak AV Ant. / CL Peak AV Margin Actual Fs (MHz) H/V Reading Reading CF Limit Limit (dB) Remark (dBuV) (dBuV) (dB) Peak AV (dBuV/m) (dBuV/m) (dBuV/m) (dBuV/m) 1826.66 V 55.18 --- -6.83 48.35 --- 74.00 54.00 -5.65 Peak 1976.66 V 56.54 --- -5.64 50.90 --- 74.00 54.00 -3.10 Peak 2230.00 V 56.55 --- -4.55 52.00 --- 74.00 54.00 -2.00 Peak 5100.00 V 44.69 --- 3.33 48.02 --- 74.00 54.00 -5.98 Peak N/A 1800.00 H 56.95 --- -7.04 49.91 --- 74.00 54.00 -4.09 Peak 2070.00 H 56.53 --- -5.18 51.35 --- 74.00 54.00 -2.65 Peak 3933.33 H 46.09 --- 1.04 47.13 --- 74.00 54.00 -6.87 Peak 4775.00 H 45.54 --- 2.59 48.13 --- 74.00 54.00 -5.87 Peak N/A REMARKS: 1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. Radiated emissions measured in frequency above 1000MHz were made with an instrument using peak/average detector mode. 3. Average test would be performed if the peak result were greater than the average limit or as required by the applicant. 4. Data of measurement within this frequency range shown “ --- ” in the table above means the reading of emissions are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. 5. Measurements above show only up to 6 maximum emissions noted, or would be lesser, with “ N/A ” remark, if no specific emissions from the EUT are recorded (ie: margin>20dB from the applicable limit) and considered that's already beyond the background noise floor. 6. Margin (dB) = Remark result (dBuV/m) – Average limit (dBuV/m). FCC ID : EMJMMORFE3UL Page 26 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.


Document Created: 2009-07-21 11:17:33
Document Modified: 2009-07-21 11:17:33
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC