Test report (DTS)_rev

FCC ID: EMJKHSAP009K

Test Report

Download: PDF
FCCID_4394371

FCC Test Report Report No.: RF190708D10-1 FCC ID: EMJKHSAP009K Test Model: HSA-P009K Received Date: Jul. 8, 2019 Test Date: Jul. 16 to 22, 2019 Issued Date: Jul. 24, 2019 Applicant: PRIMAX ELECTRONICS LTD. Address: No. 669, Ruey Kuang Road, Neihu, Taipei, Taiwan, R.O.C. Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. FCC Registration / Designation Number: 198487 / TW2021 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF190708D10-1 Page No. 1 / 30 Report Format Version: 6.1.1

Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT ................................................................................................................ 7 3.2 Description of Test Modes ................................................................................................................... 7 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................. 8 3.3 Duty cycle of test signal ...................................................................................................................... 9 3.4 Description of Support Units ............................................................................................................. 10 3.4.1 Configuration of System under Test .................................................................................................. 10 3.5 General Description of Applied Standards ........................................................................................ 10 4 Test Types and Results ....................................................................................................................... 11 4.1 Radiated Emission and Bandedge Measurement.............................................................................. 11 4.1.1 Limits of Radiated Emission and Bandedge Measurement ............................................................... 11 4.1.2 Test Instruments ................................................................................................................................ 12 4.1.3 Test Procedures................................................................................................................................. 13 4.1.4 Deviation from Test Standard ............................................................................................................ 13 4.1.5 Test Setup .......................................................................................................................................... 14 4.1.6 EUT Operating Conditions................................................................................................................. 15 4.1.7 Test Results ....................................................................................................................................... 16 4.2 6dB Bandwidth Measurement ........................................................................................................... 21 4.2.1 Limits of 6dB Bandwidth Measurement ............................................................................................. 21 4.2.2 Test Setup .......................................................................................................................................... 21 4.2.3 Test Instruments ................................................................................................................................ 21 4.2.4 Test Procedure .................................................................................................................................. 21 4.2.5 Deviation fromTest Standard ............................................................................................................. 21 4.2.6 EUT Operating Conditions................................................................................................................. 21 4.2.7 Test Result ......................................................................................................................................... 22 4.3 Conducted Output Power Measurement........................................................................................... 23 4.3.1 Limits OF Conducted Output Power Measurement .......................................................................... 23 4.3.2 Test Setup .......................................................................................................................................... 23 4.3.3 Test Instruments ................................................................................................................................ 23 4.3.4 Test Procedures................................................................................................................................. 23 4.3.5 Deviation from Test Standard ............................................................................................................ 23 4.3.6 EUT Operating Conditions................................................................................................................. 23 4.3.7 Test Results ....................................................................................................................................... 24 4.4 Power Spectral Density Measurement .............................................................................................. 25 4.4.1 Limits of Power Spectral Density Measurement ................................................................................ 25 4.4.2 Test Setup .......................................................................................................................................... 25 4.4.3 Test Instruments ................................................................................................................................ 25 4.4.4 Test Procedure .................................................................................................................................. 25 4.4.5 Deviation from Test Standard ............................................................................................................ 25 4.4.6 EUT Operating Condition .................................................................................................................. 25 4.4.7 Test Results ....................................................................................................................................... 26 4.5 Conducted Out of Band Emission Measurement .............................................................................. 27 Report No.: RF190708D10-1 Page No. 2 / 30 Report Format Version: 6.1.1

4.5.1 Limits of Conducted Out of Band Emission Measurement................................................................ 27 4.5.2 Test Setup .......................................................................................................................................... 27 4.5.3 Test Instruments ................................................................................................................................ 27 4.5.4 Test Procedure .................................................................................................................................. 27 4.5.5 Deviation from Test Standard ............................................................................................................ 27 4.5.6 EUT Operating Condition .................................................................................................................. 27 4.5.7 Test Results ....................................................................................................................................... 28 5 Pictures of Test Arrangements .......................................................................................................... 29 Appendix – Information of the Testing Laboratories ................................................................................. 30 Report No.: RF190708D10-1 Page No. 3 / 30 Report Format Version: 6.1.1

Release Control Record Issue No. Description Date Issued RF190708D10-1 Original release. Jul. 24, 2019 Report No.: RF190708D10-1 Page No. 4 / 30 Report Format Version: 6.1.1

1 Certificate of Conformity Product: HP Ecosystem Wireless Keyboard Brand: hp Test Model: HSA-P009K Sample Status: Engineering sample Applicant: PRIMAX ELECTRONICS LTD. Test Date: Jul. 16 to 22, 2019 Standards: 47 CFR FCC Part 15, Subpart C (Section 15.247) ANSI C63.10: 2013 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date: Jul. 24, 2019 Annie Chang / Senior Specialist Approved by : , Date: Jul. 24, 2019 Rex Lai / Associate Technical Manager Report No.: RF190708D10-1 Page No. 5 / 30 Report Format Version: 6.1.1

2 Summary of Test Results 47 CFR FCC Part 15, Subpart C (SECTION 15.247) FCC Test Item Result Remarks Clause 15.207 AC Power Conducted Emission N/A Power supply is 3Vdc from batteries Radiated Emissions & Band Edge Meet the requirement of limit. 15.205 & 209 Measurement PASS Minimum passing margin is -7.89dB at & 15.247(d) 7206.00 MHz. 15.247(d) Antenna Port Emission PASS Meet the requirement of limit. 15.247(a)(2) 6dB bandwidth PASS Meet the requirement of limit. 15.247(b) Conducted power PASS Meet the requirement of limit. 15.247(e) Power Spectral Density PASS Meet the requirement of limit. 15.203 Antenna Requirement PASS No antenna connector is used. Note: Determining compliance based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: Expanded Uncertainty Measurement Frequency (k=2) (±) 9kHz ~ 30MHz 2.38 dB Radiated Emissions up to 1 GHz 30MHz ~ 1000MHz 5.43 dB Radiated Emissions above 1 GHz Above 1GHz 5.42 dB 2.2 Modification Record There were no modifications required for compliance. Report No.: RF190708D10-1 Page No. 6 / 30 Report Format Version: 6.1.1

3 General Information 3.1 General Description of EUT Product HP Ecosystem Wireless Keyboard Brand hp Test Model HSA-P009K Status of EUT Engineering Sample Power Supply Rating 3Vdc from batteries Modulation Type GFSK Transfer Rate Up to 1Mbps Operating Frequency 2402MHz ~ 2480MHz Number of Channel 40 Output Power 2.259mW Antenna Type Printed antenna with 3.12dBi gain Antenna Connector N/A Accessory Device N/A Data Cable Supplied N/A Note: 1. Bluetooth & GFSK technologies can not transmit at same time. 2. The above EUT information is declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or user's manual. 3.2 Description of Test Modes 40 channels are provided to this EUT: FREQ. FREQ. FREQ. FREQ. CHANNEL CHANNEL CHANNEL CHANNEL (MHz) (MHz) (MHz) (MHz) 0 2402 10 2422 20 2442 30 2462 1 2404 11 2424 21 2444 31 2464 2 2406 12 2426 22 2446 32 2466 3 2408 13 2428 23 2448 33 2468 4 2410 14 2430 24 2450 34 2470 5 2412 15 2432 25 2452 35 2472 6 2414 16 2434 26 2454 36 2474 7 2416 17 2436 27 2456 37 2476 8 2418 18 2438 28 2458 38 2478 9 2420 19 2440 29 2460 39 2480 Report No.: RF190708D10-1 Page No. 7 / 30 Report Format Version: 6.1.1

3.2.1 Test Mode Applicability and Tested Channel Detail EUT Configure Applicable To Description Mode RE1G RE<1G PLC APCM - √ √ Note 1 √ - Where RE1G: Radiated Emission above 1GHz RE<1G: Radiated Emission below 1GHz PLC: Power Line Conducted Emission APCM: Antenna Port Conducted Measurement NOTE 1: No need to concern of Conducted Emission due to the EUT is powered by batteries. Radiated Emission Test (Above 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Configure Mode Available Channel Tested Channel Modulation Type Data Rate (Mbps) - 0 to 39 0, 19, 39 GFSK 1 Radiated Emission Test (Below 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Configure Mode Available Channel Tested Channel Modulation Type Data Rate (Mbps) - 0 to 39 0 GFSK 1 Antenna Port Conducted Measurement: This item includes all test value of each mode, but only includes spectrum plot of worst value of each mode. Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Configure Mode Available Channel Tested Channel Modulation Type Data Rate (Mbps) - 0 to 39 0, 19, 39 GFSK 1 Test Condition: Applicable To Environmental Conditions Input Power Tested By RE1G 23deg. C, 79%RH 3Vdc Dalen Dai RE<1G 23deg. C, 79%RH 3Vdc Dalen Dai APCM 25deg. C, 76%RH 3Vdc Saxon Lee Report No.: RF190708D10-1 Page No. 8 / 30 Report Format Version: 6.1.1

3.3 Duty cycle of test signal Duty cycle of test signal is < 98% Duty cycle = 2.12/8.36 = 0.254, Duty factor = 10 * log( 1/0.254) = 5.95 Report No.: RF190708D10-1 Page No. 9 / 30 Report Format Version: 6.1.1

3.4 Description of Support Units The EUT has been tested as an independent unit together without any necessary accessory or support unit. 3.4.1 Configuration of System under Test EUT (Powered from batteries) 3.5 General Description of Applied Standards The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C (15.247) KDB 558074 D01 15.247 Meas Guidance v05r02 ANSI C63.10-2013 All test items have been performed and recorded as per the above standards. Report No.: RF190708D10-1 Page No. 10 / 30 Report Format Version: 6.1.1

4 Test Types and Results 4.1 Radiated Emission and Bandedge Measurement 4.1.1 Limits of Radiated Emission and Bandedge Measurement Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table. Other emissions shall be at least 20dB below the highest level of the desired power: Frequencies Field Strength Measurement Distance (MHz) (microvolts/meter) (meters) 0.009 ~ 0.490 2400/F(kHz) 300 0.490 ~ 1.705 24000/F(kHz) 30 1.705 ~ 30.0 30 30 30 ~ 88 100 3 88 ~ 216 150 3 216 ~ 960 200 3 Above 960 500 3 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF190708D10-1 Page No. 11 / 30 Report Format Version: 6.1.1

4.1.2 Test Instruments DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL HP Preamplifier 8447D 2432A03504 Feb. 20, 2019 Feb. 19, 2020 HP Preamplifier 8449B 3008A01201 Feb. 21, 2019 Feb. 20, 2020 MITEQ Preamplifier AMF-6F-260400-33-8P 892164 Feb. 20, 2019 Feb. 19, 2020 Agilent N9038A MY51210129 Mar. 05, 2019 Mar. 04, 2020 TEST RECEIVER Schwarzbeck Antenna VULB 9168 139 Nov. 26, 2018 Nov. 25, 2019 Schwarzbeck Antenna VHBA 9123 480 Jun. 3, 2019 Jun. 2, 2021 Schwarzbeck Horn BBHA-9170 212 Nov. 25, 2018 Nov. 24, 2019 Antenna Schwarzbeck Horn BBHA 9120-D1 D130 Nov. 25, 2018 Nov. 24, 2019 Antenna ADT. Turn Table TT100 0306 NA NA ADT. Tower AT100 0306 NA NA Software Radiated_V7.6.15.9.5 NA NA NA SUHNER RF cable SF102 Cable-CH6-01 Aug. 13, 2018 Aug. 12, 2019 With 4dB PAD SUHNER RF cable SF102 Cable-CH8-3.6m Aug. 13, 2018 Aug. 12, 2019 With 3/4dB PAD KEYSIGHT MIMO Powermeasurement Test U2021XA U2021XA-001 Jun. 11, 2019 Jun. 10, 2020 set KEYSIGHT N9030A MY54490260 Aug. 3, 2018 Aug. 2, 2019 Spectrum Analyzer Loop Antenna EMCI LPA600 270 Aug. 11, 2017 Aug. 10, 2019 EMCO Horn Antenna 3115 00028257 Nov. 25, 2018 Nov. 24, 2019 Highpass filter WHK 3.1/18G-10SS SN 8 NA NA Wainwright Instruments ROHDE & SCHWARZ FSV40 101042 Sep. 27, 2018 Sep. 26, 2019 Spectrum Analyzer NOTE: 1. The calibration interval of the above test instruments is 12/24 months. And the calibrations are traceable to NML/ROC and NIST/USA. 2. The horn antenna and HP preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 3. The test was performed in Chamber No. 6. Report No.: RF190708D10-1 Page No. 12 / 30 Report Format Version: 6.1.1

4.1.3 Test Procedures For Radiated emission below 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter chamber room. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. Parallel, perpendicular, and ground-parallel orientations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Quasi-Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. NOTE: The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 9kHz at frequency below 30MHz. For Radiated emission above 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters (for 30MHz ~ 1GHz) / 1.5 meters (for above 1GHz) above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is ≥ 1/T (Duty cycle < 98%) or 10Hz (Duty cycle ≥ 98%) for Peak detection at frequency above 1GHz. 4. All modes of operation were investigated and the worst-case emissions are reported. 4.1.4 Deviation from Test Standard No deviation. Report No.: RF190708D10-1 Page No. 13 / 30 Report Format Version: 6.1.1

4.1.5 Test Setup For Radiated emission below 30MHz 1m EUT& 3m Support Units Turn Table 80cm Ground Plane Test Receiver For Radiated emission 30MHz to 1GHz Ant. Tower 1-4m Variable EUT& 3m 10m Support Units Turn Table 80cm Ground Plane Test Receiver Report No.: RF190708D10-1 Page No. 14 / 30 Report Format Version: 6.1.1

For Radiated emission above 1GHz Ant. Tower 1-4m Variable EUT& 3m Support Units Turn Table Absorber 150cm Ground Plane Test Receiver For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT Operating Conditions Set the EUT under transmission condition continuously at specific channel frequency. Report No.: RF190708D10-1 Page No. 15 / 30 Report Format Version: 6.1.1

4.1.7 Test Results ABOVE 1GHz DATA CHANNEL TX Channel 0 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.00 46.76 PK 74.00 -27.24 1.00 H 48 46.98 -0.22 2 2390.00 32.80 AV 54.00 -21.20 1.00 H 48 33.02 -0.22 3 *2402.00 97.25 PK 1.00 H 48 97.47 -0.22 4 *2402.00 84.84 AV 1.00 H 48 85.06 -0.22 5 4804.00 52.33 PK 74.00 -21.67 1.00 H 321 45.86 6.47 6 4804.00 43.18 AV 54.00 -10.82 1.00 H 321 36.71 6.47 7 #7206.00 58.62 PK 74.00 -15.38 1.34 H 347 45.71 12.91 8 #7206.00 46.11 AV 54.00 -7.89 1.34 H 347 33.20 12.91 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.00 45.42 PK 74.00 -28.58 1.03 V 292 45.64 -0.22 2 2390.00 31.81 AV 54.00 -22.19 1.03 V 292 32.03 -0.22 3 *2402.00 93.04 PK 1.03 V 292 93.26 -0.22 4 *2402.00 81.50 AV 1.03 V 292 81.72 -0.22 5 4804.00 51.14 PK 74.00 -22.86 1.68 V 46 44.67 6.47 6 4804.00 41.57 AV 54.00 -12.43 1.68 V 46 35.10 6.47 7 #7206.00 56.42 PK 74.00 -17.58 1.53 V 110 43.51 12.91 8 #7206.00 44.27 AV 54.00 -9.73 1.53 V 110 31.36 12.91 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. Margin value = Emission Level – Limit value 4. The other emission levels were very low against the limit. 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF190708D10-1 Page No. 16 / 30 Report Format Version: 6.1.1

CHANNEL TX Channel 19 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2440.00 96.76 PK 1.00 H 52 96.96 -0.20 2 *2440.00 84.51 AV 1.00 H 52 84.71 -0.20 3 4880.00 51.89 PK 74.00 -22.11 1.03 H 327 45.73 6.16 4 4880.00 42.54 AV 54.00 -11.46 1.03 H 327 36.38 6.16 5 7320.00 58.25 PK 74.00 -15.75 1.28 H 339 45.29 12.96 6 7320.00 45.87 AV 54.00 -8.13 1.28 H 339 32.91 12.96 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2440.00 92.61 PK 1.01 V 279 92.81 -0.20 2 *2440.00 80.88 AV 1.01 V 279 81.08 -0.20 3 4880.00 49.71 PK 74.00 -24.29 1.74 V 53 43.55 6.16 4 4880.00 40.88 AV 54.00 -13.12 1.74 V 53 34.72 6.16 5 7320.00 56.14 PK 74.00 -17.86 1.44 V 123 43.18 12.96 6 7320.00 44.05 AV 54.00 -9.95 1.44 V 123 31.09 12.96 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. Margin value = Emission Level – Limit value 4. The other emission levels were very low against the limit. 5. " * ": Fundamental frequency. Report No.: RF190708D10-1 Page No. 17 / 30 Report Format Version: 6.1.1

CHANNEL TX Channel 39 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2480.00 97.05 PK 1.43 H 32 97.22 -0.17 2 *2480.00 84.97 AV 1.43 H 32 85.14 -0.17 3 2483.50 57.05 PK 74.00 -16.95 1.43 H 32 57.21 -0.16 4 2483.50 34.17 AV 54.00 -19.83 1.43 H 32 34.33 -0.16 5 4960.00 51.87 PK 74.00 -22.13 1.04 H 332 45.69 6.18 6 4960.00 42.69 AV 54.00 -11.31 1.04 H 332 36.51 6.18 7 7440.00 58.23 PK 74.00 -15.77 1.37 H 352 45.38 12.85 8 7440.00 45.92 AV 54.00 -8.08 1.37 H 352 33.07 12.85 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2480.00 92.98 PK 1.08 V 282 93.15 -0.17 2 *2480.00 81.49 AV 1.08 V 282 81.66 -0.17 3 2483.50 55.31 PK 74.00 -18.69 1.08 V 282 55.47 -0.16 4 2483.50 32.70 AV 54.00 -21.30 1.08 V 282 32.86 -0.16 5 4960.00 49.98 PK 74.00 -24.02 1.61 V 59 43.80 6.18 6 4960.00 41.10 AV 54.00 -12.90 1.61 V 59 34.92 6.18 7 7440.00 56.17 PK 74.00 -17.83 1.46 V 107 43.32 12.85 8 7440.00 44.00 AV 54.00 -10.00 1.46 V 107 31.15 12.85 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. Margin value = Emission Level – Limit value 4. The other emission levels were very low against the limit. 5. " * ": Fundamental frequency. Report No.: RF190708D10-1 Page No. 18 / 30 Report Format Version: 6.1.1

BELOW 1GHz WORST-CASE DATA CHANNEL TX Channel 0 DETECTOR Quasi-Peak (QP) FREQUENCY RANGE 9kHz ~ 1GHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 30.73 27.35 QP 40.00 -12.65 2.17 H 187 36.20 -8.85 2 150.52 20.24 QP 43.50 -23.26 1.52 H 109 27.07 -6.83 3 355.68 23.01 QP 46.00 -22.99 1.77 H 208 27.14 -4.13 4 472.56 25.98 QP 46.00 -20.02 1.34 H 360 27.62 -1.64 5 615.44 29.27 QP 46.00 -16.73 1.08 H 178 27.94 1.33 6 850.67 32.23 QP 46.00 -13.77 2.21 H 349 26.87 5.36 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. Margin value = Emission Level – Limit value 4. The other emission levels were very low against the limit of frequency range 30MHz~1000MHz. 5. The emission levels were very low against the limit of frequency range 9kHz~30MHz: the amplitude of spurious emissions attenuated more than 20 dB below the permissible value to be report. Report No.: RF190708D10-1 Page No. 19 / 30 Report Format Version: 6.1.1

CHANNEL TX Channel 0 DETECTOR Quasi-Peak (QP) FREQUENCY RANGE 9kHz ~ 1GHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 38.49 26.11 QP 40.00 -13.89 1.66 V 224 34.02 -7.91 2 153.58 20.53 QP 43.50 -22.97 1.35 V 163 27.29 -6.76 3 347.09 22.73 QP 46.00 -23.27 1.79 V 257 27.07 -4.34 4 461.46 25.84 QP 46.00 -20.16 2.11 V 349 27.70 -1.86 5 613.65 28.37 QP 46.00 -17.63 1.92 V 233 27.10 1.27 6 789.32 31.60 QP 46.00 -14.40 1.30 V 304 27.35 4.25 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. Margin value = Emission Level – Limit value 4. The other emission levels were very low against the limit of frequency range 30MHz~1000MHz. 5. The emission levels were very low against the limit of frequency range 9kHz~30MHz: the amplitude of spurious emissions attenuated more than 20 dB below the permissible value to be report. Report No.: RF190708D10-1 Page No. 20 / 30 Report Format Version: 6.1.1

4.2 6dB Bandwidth Measurement 4.2.1 Limits of 6dB Bandwidth Measurement The minimum of 6dB Bandwidth Measurement is 0.5 MHz. 4.2.2 Test Setup Spectrum EUT Attenuator Analyzer 4.2.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.2.4 Test Procedure a. Set resolution bandwidth (RBW) = 100kHz b. Set the video bandwidth (VBW) ≥ 3 x RBW, Detector = Peak. c. Trace mode = max hold. d. Sweep = auto couple. e. Measure the maximum width of the emission that is constrained by the frequencies associated with the two amplitude points (upper and lower) that are attenuated by 6 dB relative to the maximum level measured in the fundamental emission 4.2.5 Deviation fromTest Standard No deviation. 4.2.6 EUT Operating Conditions The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually. Report No.: RF190708D10-1 Page No. 21 / 30 Report Format Version: 6.1.1

4.2.7 Test Result 6dB Bandwidth Minimum Limit Channel Frequency (MHz) Pass / Fail (MHz) (MHz) 0 2402 0.50 0.5 Pass 19 2440 0.50 0.5 Pass 39 2480 0.50 0.5 Pass SPECTRUM PLOT OF WORST VALUE CH 0 Report No.: RF190708D10-1 Page No. 22 / 30 Report Format Version: 6.1.1

4.3 Conducted Output Power Measurement 4.3.1 Limits OF Conducted Output Power Measurement For systems using digital modulation in the 2400–2483.5 MHz bands: 1 Watt (30dBm) 4.3.2 Test Setup EUT Power Sensor Power Meter Attenuator 4.3.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.3.4 Test Procedures A peak power sensor was used on the output port of the EUT. A power meter was used to read the response of the peak power sensor. Record the power level. Average power sensor was used to perform output power measurement, trigger and gating function of wide band power meter is enabled to measure max output power of TX on burst. Duty factor is not added to measured value. 4.3.5 Deviation from Test Standard No deviation. 4.3.6 EUT Operating Conditions Same as Item 4.3.6. Report No.: RF190708D10-1 Page No. 23 / 30 Report Format Version: 6.1.1

4.3.7 Test Results FOR PEAK POWER Channel Frequency (MHz) Peak Power (mW) Peak Power (dBm) Limit (dBm) Pass/Fail 0 2402 2.254 3.53 30 Pass 19 2440 2.259 3.54 30 Pass 39 2480 2.223 3.47 30 Pass FOR AVERAGE POWER Frequency Average Power Average Power Channel (MHz) (mW) (dBm) 0 2402 2.213 3.45 19 2440 2.218 3.46 39 2480 2.178 3.38 Report No.: RF190708D10-1 Page No. 24 / 30 Report Format Version: 6.1.1

4.4 Power Spectral Density Measurement 4.4.1 Limits of Power Spectral Density Measurement The Maximum of Power Spectral Density Measurement is 8dBm per 3 kHz. 4.4.2 Test Setup EUT Spectrum Attenuator Analyzer 4.4.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.4.4 Test Procedure a. Set analyzer center frequency to DTS channel center frequency. b. Set the span to 1.5 times the DTS bandwidth. c. Set the RBW to: 3 kHz ≤ RBW ≤ 100 kHz. d. Set the VBW ≥ 3 × RBW. e. Detector = peak. f. Sweep time = auto couple. g. Trace mode = max hold. h. Allow trace to fully stabilize. i. Use the peak marker function to determine the maximum amplitude level within the RBW. 4.4.5 Deviation from Test Standard No deviation. 4.4.6 EUT Operating Condition Same as Item 4.3.6. Report No.: RF190708D10-1 Page No. 25 / 30 Report Format Version: 6.1.1

4.4.7 Test Results Freq. PSD Limit PASS Channel (MHz) (dBm/3kHz) (dBm/3kHz) /FAIL 0 2402 -7.45 8 PASS 19 2440 -7.56 8 PASS 39 2480 -6.53 8 PASS Spectrum Plot Of Worst Value CH 39 Report No.: RF190708D10-1 Page No. 26 / 30 Report Format Version: 6.1.1

4.5 Conducted Out of Band Emission Measurement 4.5.1 Limits of Conducted Out of Band Emission Measurement Below –20dB of the highest emission level of operating band (in 100kHz Resolution Bandwidth). 4.5.2 Test Setup EUT Spectrum Attenuator Analyzer 4.5.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.5.4 Test Procedure MEASUREMENT PROCEDURE REF 1. Set the RBW = 100 kHz. 2. Set the VBW ≥ 300 kHz. 3. Detector = peak. 4. Sweep time = auto couple. 5. Trace mode = max hold. 6. Allow trace to fully stabilize. 7. Use the peak marker function to determine the maximum power level in any 100 kHz band segment within the fundamental EBW. MEASUREMENT PROCEDURE OOBE 1. Set RBW = 100 kHz. 2. Set VBW ≥ 300 kHz. 3. Detector = peak. 4. Sweep = auto couple. 5. Trace Mode = max hold. 6. Allow trace to fully stabilize. 7. Use the peak marker function to determine the maximum amplitude level. 4.5.5 Deviation from Test Standard No deviation. 4.5.6 EUT Operating Condition Same as Item 4.3.6. Report No.: RF190708D10-1 Page No. 27 / 30 Report Format Version: 6.1.1

4.5.7 Test Results CH 0 CH 19 CH 39 CH 0 Band edge CH 39 Band edge Report No.: RF190708D10-1 Page No. 28 / 30 Report Format Version: 6.1.1

5 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: RF190708D10-1 Page No. 29 / 30 Report Format Version: 6.1.1

Appendix – Information of the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are FCC recognized accredited test firms and accredited according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Lin Kou EMC/RF Lab Hsin Chu EMC/RF/Telecom Lab Tel: 886-2-26052180 Tel: 886-3-6668565 Fax: 886-2-26051924 Fax: 886-3-6668323 Hwa Ya EMC/RF/Safety Lab Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. --- END --- Report No.: RF190708D10-1 Page No. 30 / 30 Report Format Version: 6.1.1


Document Created: 2019-08-12 08:50:56
Document Modified: 2019-08-12 08:50:56
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC