Cover Letter (Modular Approval Request).pdf

FCC ID: EMJDRCRF08D

Cover Letter(s)

Download: PDF

FCCID_2307455

FCC ID: EMJDRCRF08D

Modular Approval Request Letter

Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch

June 17, 2014

Dear Application Examiner,

PRIMAX ELECTRONICS LTD., RF module, FCC ID: EMJDRCRF08D would like to
have your authorization as a modular approval specific to the mobile RF exposure condition.

The requirements of Public Notice DA00-1407 have been met and shown on the
following statements.
1. “The modular transmitter must have its own RF shielding.” The radio portion of
this module has been shielded, please see exhibition External Photo.

2. “The modular transmitter must have buffered modulation/data inputs.” The EUT
has buffered data inputs, it is integrated in chip nRF24LU1P .

3. “The modular transmitter must have its own power supply regulation.” The part
number of this regulator is nRF24LU1P .

4. “The modular transmitter must comply with the antenna requirements of section
15.203 and 15.204(C).” The EUT meets the FCC antenna requirements. The
spurious emission, unique antenna connector and photo of antennas are shown
in the test report.

5. “The modular transmitter must be tested in a stand-alone configuration” The EUT
was tested in a stand-alone configuration via a USB extender. Please see section
Photographs of Test Configuration in the test report, the EUT was plugged in this
extender.

6. “The modular transmitter must be labeled with its own FCC ID number.” Please
see exhibition Label Sample for the FCC ID of this module. And also in the
exhibition Users Manual, there are instructions give to the OEM on how to label
the end product.

Report No.: RF140610D06-1

Document Created: 2014-06-25 14:02:17
Document Modified: 2014-06-25 14:02:17

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC