DCD

FCC ID: EMJC50-6AT05

Test Report

Download: PDF
FCCID_2117110

Report No: C130527Z02-RP1 FCC 47 CFR PART 15 SUBPART C TEST REPORT for TX wireless charger Model: 50-6AT05 Trade Name: Philips/Primax Test Report Number: C130527Z02-RP1 Issued for: Primax Electronics Ltd. No.669, Ruey Kuang Road, Neihu, Taipei, Taiwan, R.O.C Issued by COMPLIANCE CERTIFICATION SERVICES (SHENZHEN) INC. No.10-1, Mingkeda Logistics Park, No.18, Huanguan South Rd., Guan Lan Town, Baoan District, Shenzhen, China TEL: 86-755-28055000 FAX: 86-755-28055221 Issued Date: July 8, 2013 Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by TAF, A2LA, NVLAP, NIST or any government agencies. The test result of this report relate only to the tested sample identified in this report. FCC ID: EMJC50-6AT05 Page 1 / 18

Report No: C130527Z02-RP1 Revision History Issue Effect Rev. No. Revisions Page Revised By 00 C130527Z02-RP1 Initial Issue ALL Nancy Fu FCC ID: EMJC50-6AT05 Page 2 / 18 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Report No: C130527Z02-RP1 TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION .....................................................................................4 2 EUT DESCRIPTION..........................................................................................................5 3 TEST METHODOLOGY....................................................................................................6 3.1. EUT CONFIGURATION............................................................................................6 3.2. EUT EXERCISE........................................................................................................6 3.3. GENERAL TEST PROCEDURES.............................................................................6 3.4. FCC PART 15.205 RESTRICTED BANDS OF OPERATIONS .................................7 3.5. DESCRIPTION OF TEST MODES............................................................................7 4 INSTRUMENT CALIBRATION .........................................................................................8 4.1. MEASURING INSTRUMENT CALIBRATION ...........................................................8 4.2. MEASUREMENT EQUIPMENT USED .....................................................................8 5 FACILITIES AND ACCREDITATIONS .............................................................................9 5.1. FACILITIES...............................................................................................................9 5.2. EQUIPMENT.............................................................................................................9 5.3. TABLE OF ACCREDITATIONS AND LISTINGS.......................................................9 5.4. MEASUREMENT UNCERTAINTY..........................................................................10 6 SETUP OF EQUIPMENT UNDER TEST ........................................................................11 6.1. SETUP CONFIGURATION OF EUT .......................................................................11 6.2. SUPPORT EQUIPMENT ........................................................................................11 7 FCC PART 15.209 REQUIREMENTS ............................................................................12 7.1. RADIATED EMISSIONS .........................................................................................12 7.2. POWERLINE CONDUCTED EMISSIONS..............................................................17 FCC ID: EMJC50-6AT05 Page 3 / 18 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Report No: C130527Z02-RP1 1 TEST RESULT CERTIFICATION Product TX wireless charger Model 50-6AT05 Brand Philips/Primax Tested May 27~July 5, 2013 Applicant Primax Electronics Ltd. No.669, Ruey Kuang Road, Neihu, Taipei, Taiwan, R.O.C Manufacturer Dongguan Primax Electronic & Telecommunication Products Ltd. (1). Liu Wu District, Shek Kit Town, Dongguan City, Guang Dong Province, P.R.China (2).YuHong Industrial Zone, ChenDong, ShekKit Town, DongGuan City, GuangDong, P.R.China APPLICABLE STANDARDS STANDARD TEST RESULT FCC 47 CFR Part 15 Subpart C No non-compliance noted We hereby certify that: The above equipment was tested by Compliance Certification Services Inc. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4: 2009 and the energy emitted by the sample tested as described in this report is in compliance with the requirements of FCC Rules Part 15.207, 15.209.. The test results of this report relate only to the tested sample identified in this report. Approved by: Reviewed by: Tom Gan Ruby Zhang Supervisor of EMC Dept. Supervisor of Report Dept. Compliance Certification Service Inc. Compliance Certification Service Inc. FCC ID: EMJC50-6AT05 Page 4 / 18 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Report No: C130527Z02-RP1 2 EUT DESCRIPTION Product TX wireless charger Model Number 50-6AT05 Brand Philips/Primax Model Discrepancy N/A Identify Number C130527Z02-RP1 Power Supply DC5V Supplied by the adapter Dongguan City Yingju Electronics Co., Ltd./ Adapter Manufacturer/Model YJC010C-0502000U Name I/P: 100-240Vac, 50/60Hz, 350mA O/P: 5Vdc, 2000mA Received Date May 27, 2013 Operating Frequency Range 112kHz-205kHz Antenna Specification Coil antenna Temperature Range 0°C ~ +45°C Remark: 1. The sample selected for test was engineering sample that approximated to production product and was provided by manufacturer. 2. This submittal(s) (test report) is intended for FCC ID: EMJC50-6AT05 filing to comply with Section 15.209 of the FCC Part 15, Subpart C Rules. FCC ID: EMJC50-6AT05 Page 5 / 18 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Report No: C130527Z02-RP1 3 TEST METHODOLOGY The tests documented in this report were performed in accordance with ANSI C63.4 (2003) and FCC CFR 47 Part 2, 15.207, 15.209. 3.1. EUT CONFIGURATION The EUT configuration for testing is installed on RF field strength measurement to meet the Commissions requirement and operating in a manner that intends to maximize its emission characteristics in a continuous normal application. 3.2. EUT EXERCISE The EUT was operated in the engineering mode to fix the TX frequency that was for the purpose of the measurements. 3.3. GENERAL TEST PROCEDURES Conducted Emissions The EUT is placed on the turntable, which is 0.8 m above ground plane. According to the requirements in Section 13.1.4.1 of ANSI C63.4 (2003). Conducted emissions from the EUT measured in the frequency range between 0.15 MHz and 30MHz using CISPR Quasi-peak and average detector modes. Radiated Emissions The EUT is placed on a turn table, which is 0.8 m above ground plane. The turntable shall rotate 360 degrees to determine the position of maximum emission level. EUT is set 3m away from the receiving antenna, which varied from 1m to 4m to find out the highest emission. And also, each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. In order to find out the maximum emissions, exploratory radiated emission measurements were made according to the requirements in Section 13.1.4.1 of ANSI C63.4 (2003). FCC ID: EMJC50-6AT05 Page 6 / 18 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Report No: C130527Z02-RP1 3.4. FCC PART 15.205 RESTRICTED BANDS OF OPERATIONS (a) Except as shown in paragraph (d) of this section, only spurious emissions are permitted in any of the frequency bands listed below: MHz MHz MHz GHz 0.090 - 0.110 16.42 - 16.423 399.9 - 410 4.5 - 5.15 1 0.495 - 0.505 16.69475 - 16.69525 608 - 614 5.35 - 5.46 2.1735 - 2.1905 16.80425 - 16.80475 960 - 1240 7.25 - 7.75 4.125 - 4.128 25.5 - 25.67 1300 - 1427 8.025 - 8.5 4.17725 - 4.17775 37.5 - 38.25 1435 - 1626.5 9.0 - 9.2 4.20725 - 4.20775 73 - 74.6 1645.5 - 1646.5 9.3 - 9.5 6.215 - 6.218 74.8 - 75.2 1660 - 1710 10.6 - 12.7 6.26775 - 6.26825 108 - 121.94 1718.8 - 1722.2 13.25 - 13.4 6.31175 - 6.31225 123 - 138 2200 - 2300 14.47 - 14.5 8.291 - 8.294 149.9 - 150.05 2310 - 2390 15.35 - 16.2 8.362 - 8.366 156.52475 - 2483.5 - 2500 17.7 - 21.4 8.37625 - 8.38675 156.52525 2655 - 2900 22.01 - 23.12 8.41425 - 8.41475 156.7 - 156.9 3260 - 3267 23.6 - 24.0 12.29 - 12.293 162.0125 - 167.17 3332 - 3339 31.2 - 31.8 12.51975 - 12.52025 167.72 - 173.2 3345.8 - 3358 36.43 - 36.5 12.57675 - 12.57725 240 - 285 3600 - 4400 ( 2) 13.36 - 13.41 322 - 335.4 1 Until February 1, 1999, this restricted band shall be 0.490-0.510 MHz. 2 Above 38.6 (b) Except as provided in paragraphs (d) and (e), the field strength of emissions appearing within these frequency bands shall not exceed the limits shown in Section 15.209. At frequencies equal to or less than 1000 MHz, compliance with the limits in Section 15.209 shall be demonstrated using measurement instrumentation employing a CISPR quasi-peak detector. Above 1000 MHz, compliance with the emission limits in Section 15.209 shall be demonstrated based on the average value of the measured emissions. The provisions in Section 15.35 apply to these measurements. 3.5. DESCRIPTION OF TEST MODES The EUT (model: 50-6AT05) had been tested under operating condition. Test program used to control the EUT for staying in continuous transmitting mode was programmed. After verification,all tests were carried out with the worst case test modes as shown below 1GHz. RF ID: Channel 175kHz was chosen for full testing. FCC ID: EMJC50-6AT05 Page 7 / 18 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Report No: C130527Z02-RP1 4 INSTRUMENT CALIBRATION 4.1. MEASURING INSTRUMENT CALIBRATION The measuring equipment, which was utilized in performing the tests documented herein, has been calibrated in accordance with the manufacturer's recommendations for utilizing calibration equipment, which is traceable to recognized national standards. 4.2. MEASUREMENT EQUIPMENT USED Equipment Used for Emissions Measurement Radiated Emission Test Site 966(2) Serial Last Due Name of Equipment Manufacturer Model Number Number Calibration Calibration PSA Series Spectrum Agilent E4446A US44300399 03/09/2013 03/08/2014 Analyzer EMI TEST RECEIVER ROHDE&SCHWARZ ESCI 100783 03/09/2013 03/08/2014 Amplifier MITEQ AM-1604-3000 1123808 03/18/2013 03/18/2014 High Noise Amplifier Agilent 8449B 3008A01838 03/18/2013 03/18/2014 Board-Band Horn Schwarzbeck BBHA 9170 9170-497 06/21/2013 06/21/2014 Antenna Bilog Antenna SCHAFFNER CBL6143 5082 03/02/2013 03/01/2014 Horn Antenna SCHWARZBECK BBHA9120 D286 03/02/2013 03/01/2014 Loop Antenna A、R、A PLA-1030/B 1029 03/23/2013 03/23/2014 Turn Table N/A N/A N/A N.C.R N.C.R Controller Sunol Sciences SC104V 022310-1 N.C.R N.C.R Controller CT N/A N/A N.C.R N.C.R Temp. / Humidity Meter Anymetre JR913 N/A 03/04/2013 03/03/2014 Test S/W FARAD LZ-RF / CCS-SZ-3A2 NOTE: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The FCC Site Registration number is 101879. 3. N.C.R = No Calibration Required. Conducted Emission Test Site Name of Last Due Manufacturer Model Number Serial Number Equipment Calibration Calibration EMI TEST RECEIVER ROHDE&SCHWARZ ESCI 100783 03/09/2013 03/08/2014 LISN(EUT) ROHDE&SCHWARZ ENV216 101543-WX 04/20/2013 04/19/2014 LISN EMCO 3825/2 8901-1459 03/09/2013 03/08/2014 Temp. / Humidity Meter VICTOR HTC-1 N/A 03/04/2013 03/03/2014 Test S/W FARAD EZ-EMC/ CCS-3A1-CE NOTE: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. N.C.R = No Calibration Request. FCC ID: EMJC50-6AT05 Page 8 / 18 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Report No: C130527Z02-RP1 5 FACILITIES AND ACCREDITATIONS 5.1. FACILITIES All measurement facilities used to collect the measurement data are located at No.10-1, Mingkeda Logistics Park, No.18, Huanguan South Rd., Guan Lan Town, Baoan District, Shenzhen, China The sites are constructed in conformance with the requirements of ANSI C63.7, ANSI C63.4 (2003) and CISPR Publication 22. 5.2. EQUIPMENT Radiated emissions are measured with one or more of the following types of linearly polarized antennas: tuned dipole, biconical, log periodic, bi-log, and/or ridged waveguide, horn. Spectrum analyzers with pre-selectors and quasi-peak detectors are used to perform radiated measurements. Conducted emissions are measured with Line Impedance Stabilization Networks and EMI Test Receivers. Calibrated wideband preamplifiers, coaxial cables, and coaxial attenuators are also used for making measurements. All receiving equipment conforms to CISPR Publication 16-1, “Radio Interference Measuring Apparatus and Measurement Methods.” 5.3. TABLE OF ACCREDITATIONS AND LISTINGS Our laboratories are accredited and approved by the following accreditation body according to ISO/IEC 17025. USA A2LA China CNAS The measuring facility of laboratories has been authorized or registered by the following approval agencies. USA FCC Japan VCCI(C-3478, R-3135, T-652, G-624) Canada INDUSTRY CANADA Taiwan BSMI Norway Nemko Copies of granted accreditation certificates are available for downloading from our web site, http://www.ccsrf.com FCC ID: EMJC50-6AT05 Page 9 / 18 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Report No: C130527Z02-RP1 5.4. MEASUREMENT UNCERTAINTY Parameter Uncertainty Radiated Emission, 30 to 200 MHz +/-3.6880dB Test Site : 966(2) Radiated Emission, 200 to 1000 MHz +/-3.6695dB Test Site : 966(2) Radiated Emission, 1 to 8 GHz +/-5.1782dB Radiated Emission, 8 to 18 GHz +/-5.2173dB Conducted Emissions +/-3.6836dB Band Width 178kHz Peak Output Power MU +/-1.906dB Band Edge MU +/-0.182dB Channel Separation MU 416.178Hz Duty Cycle MU 0.054ms Frequency Stability MU 226Hz This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. The measured result is above (below) the specification limit by a margin less than the measurement uncertainty; it is therefore not possible to state compliance based on the 95% level of confidence. However, the result indicates that compliance (non-compliance) is more probable than non-compliance) with the specification limit. FCC ID: EMJC50-6AT05 Page 10 / 18 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Report No: C130527Z02-RP1 6 SETUP OF EQUIPMENT UNDER TEST 6.1. SETUP CONFIGURATION OF EUT See test photographs attached in Appendix 1 for the actual connections between EUT and support equipment. 6.2. SUPPORT EQUIPMENT No. Equipment Model No. Serial No. FCC ID Brand Data Cable Power Cord Windows 1 Lumia 920 N/A N/A N/A N/A N/A Phone Remark: Grounding was established in accordance with the manufacturer’s requirements and conditions for the intended use. FCC ID: EMJC50-6AT05 Page 11 / 18 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Report No: C130527Z02-RP1 7 FCC PART 15.209 REQUIREMENTS 7.1. RADIATED EMISSIONS LIMIT 1. According to §15.209(a), except as provided elsewhere in this Subpart, the emissions from an intentional radiator shall not exceed the field strength levels specified in the following table: Field Strength Measurement Distance Frequency (MHz) (μV/m) (m) 0.009–0.490 2400/F(kHz) 300 0.490–1.705 24000/F(kHz) 30 1.705–30.0 30 30 30–88 100** 3 88–216 150** 3 216–960 200** 3 Above 960 500 3 Remark: Except as provided in paragraph (g), fundamental emissions from intentional radiators operating under this Section shall not be located in the frequency bands 54-72 MHz, 76-88 MHz, 174-216 MHz or 470-806 MHz. However, operation within these frequency bands is permitted under other sections of this Part, e.g., Sections 15.231 and 15.241. 2. In the emission table above, the tighter limit applies at the band edges. Field Strength Field Strength Frequency (Hz) (μV/m at 3-meter) (dBμV/m at 3-meter) 30-88 100 40 88-216 150 43.5 216-960 200 46 Above 960 500 54 FCC ID: EMJC50-6AT05 Page 12 / 18 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Report No: C130527Z02-RP1 TEST CONFIGURATION 9kHz ~ 30MHz Antenna tower 3m Loop antenna EUT 4m Spectrum / Receiver Turntable 1m 0.8m Pre-amp Reference ground plane 30MHz ~ 1 GHz Antenna tower 3m Bi-log antenna EUT 4m Spectrum analyzer Turntable 1m 0.8m Reference ground plane FCC ID: EMJC50-6AT05 Page 13 / 18 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Report No: C130527Z02-RP1 TEST PROCEDURE For 9kHz ~ 30MHz 1. The EUT is placed on a turntable, which is 0.8m above ground plane. 2. The turntable shall be rotated for 360 degrees to determine the position of maximum emission level. 3. EUT is set 3m away from the receiving antenna, The center of the loop shall be 1 m above the ground then to find out the highest emissions. 4. Maximum procedure was performed on the six highest emissions to ensure EUT compliance. 5. And also, each emission was to be maximized by rotated of receiving antenna axis 6. Set the spectrum analyzer in the following setting as: RBW=10kHz / VBW=30kHz / Sweep=AUTO 7. Repeat above procedures until the measurements for all frequencies are complete. For 30MHz ~ 1GHz 1. The EUT is placed on a turntable, which is 0.8m above ground plane. 2. The turntable shall be rotated for 360 degrees to determine the position of maximum emission level. 3. EUT is set 3m away from the receiving antenna, which is varied from 1m to find out the highest emissions. 4. Maximum procedure was performed on the six highest emissions to ensure EUT compliance. 5. And also, each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. 6. Set the spectrum analyzer in the following setting as: RBW=100kHz / VBW=300kHz / Sweep=AUTO 7. Repeat above procedures until the measurements for all frequencies are complete. TEST RESULTS No non-compliance noted. FCC ID: EMJC50-6AT05 Page 14 / 18 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Report No: C130527Z02-RP1 TEST DATA Operation Mode: TX mode Test Date: July 5, 2013 Temperature: 24°C Tested by: Mack Li Humidity: 52 % RH Polarity: Ver. / Hor. Correction Frequency Reading Result Limit 3m Margin Detector Mode Factor (MHz) (dBuV) (dBuV/m) (dBuV/m) (dB) (PK/QP/AVG) (dB/m) 0.0142 35.29 82.46 117.75 122.26 -4.51 Peak 0.0687 24.95 70.49 95.44 100.69 -5.25 Peak 0.1023 22.45 66.31 88.76 95.24 -6.48 Peak 0.1500 23.64 62.70 86.34 90.00 -3.66 Peak 3.4334 14.59 40.29 54.88 69.50 -14.62 Peak 7.1150 14.76 34.71 49.47 69.50 -20.03 Peak Remark: 1. Measuring frequencies from 9kHz to the 30MHz. 2. Radiated emissions measured in frequency range from 9kHz to 1000MHz were made with an instrument using peak/quasi-peak/average detector mode. 3. Measurements above show only up to 6 maximum emissions noted, or would be lesser, with “ N/A ” remark, if no specific emissions from the EUT are recorded (ie: margin>20dB from the applicable limit) and considered that's already beyond the background noise floor. 4. Margin (dB) = Result (dBuV/m) – Limit (dBuV/m). FCC ID: EMJC50-6AT05 Page 15 / 18 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Report No: C130527Z02-RP1 Operation Mode: Normal Link Test Date: June 5, 2013 Temperature: 24oC Tested by: Mack Li Humidity: 52 % RH Polarity: Ver. / Hor. Frequency Reading Correction Result Limit Margin Antenna Remark (MHz) (dBμV) Factor (dBμV/m) (dBμV/m) (dB) Pole (dB/m) (V/H) 41.3167 52.65 -14.73 37.92 40.00 -2.08 V QP 199.7500 45.74 -18.72 27.02 43.50 -16.48 V QP 409.9166 32.91 -15.24 17.67 46.00 -28.33 V QP 539.2500 33.11 -14.14 18.97 46.00 -27.03 V QP 717.0833 33.63 -10.92 22.71 46.00 -23.29 V QP 776.9000 33.33 -11.31 22.02 46.00 -23.98 V QP 60.7167 45.17 -21.49 23.68 40.00 -16.32 H QP 202.9832 50.02 -18.43 31.59 43.50 -11.91 H QP 361.4166 36.73 -16.78 19.95 46.00 -26.05 H QP 506.9167 33.07 -14.46 18.61 46.00 -27.39 H QP 605.5333 33.56 -12.58 20.98 46.00 -25.02 H QP 684.7500 32.92 -11.04 21.88 46.00 -24.12 H QP Remark:1. Measuring frequencies from 30 MHz to the 1GHz. 2. Radiated emissions measured in frequency range from 30 MHz to 1000MHz were made with an instrument using Peak detector mode. 3. Data of measurement within this frequency range shown “ --- ” in the table above means the reading of emissions are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. 4. The IF bandwidth of receiver between 30MHz to 1GHz was 100kHz. FCC ID: EMJC50-6AT05 Page 16 / 18 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Report No: C130527Z02-RP1 7.2. POWERLINE CONDUCTED EMISSIONS LIMIT For an intentional radiator which is designed to be connected to the public utility (AC) power line, the radio frequency voltage that is conducted back onto the AC power line on any frequency or frequencies within the band 150 kHz to 30 MHz shall not exceed 250 microvolts (The limit decreases linearly with the logarithm of the frequency in the range 0.15 MHz to 0.50 MHz). The limits at specific frequency range is listed as follows: Limits Frequency Range (dBμV) (MHz) Quasi-peak Average 0.15 to 0.50 66 to 56* 56 to 46* 0.50 to 5 56 46 5 to 30 60 50 Compliance with this provision shall be based on the measurement of the radio frequency voltage between each power line (LINE and NEUTRAL) and ground at the power terminals. TEST CONFIGURATION See test photographs attached in Appendix I for the actual connections between EUT and support equipment. TEST PROCEDURE 1. The EUT was placed on a table, which is 0.8m above ground plane. 2. Maximum procedure was performed on the six highest emissions to ensure EUT compliance. 3. Repeat above procedures until all frequency measured were complete. TEST RESULTS The initial step in collecting conducted data is a spectrum analyzer peak scan of the measurement range. Significant peaks are then marked as shown on the following data page, and these signals are then quasi-peaked. FCC ID: EMJC50-6AT05 Page 17 / 18 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Report No: C130527Z02-RP1 TEST DATA The initial step in collecting conducted data is a spectrum analyzer peak scan of the measurement range. Significant peaks are then marked as shown on the following data page, and these signals are then quasi-peaked. Operation Mode: Charge Test Date: June 13, 2013 Temperature: 22°C Tested by: Sun Guo Humidity: 45% RH QuasiPeak Average Correction QuasiPeak Average QuasiPeak Average QuasiPeak Average Frequency Line (MHz) Reading Reading Factor Result Result Limit Limit Margin Margin (L1/L2) (dBuV) (dBuV) (dB) (dBuV) (dBuV) (dBuV) (dBuV) (dB) (dB) 0.4660 21.93 9.87 9.68 31.61 19.55 56.58 46.58 -24.97 -27.03 L1 0.5899 34.14 1.56 9.69 43.83 11.25 56.00 46.00 -12.17 -34.75 L1 1.1900 28.64 -6.11 9.68 38.32 3.57 56.00 46.00 -17.68 -42.43 L1 2.1180 19.60 6.33 9.68 29.28 16.01 56.00 46.00 -26.72 -29.99 L1 4.7020 21.77 6.37 9.75 31.52 16.12 56.00 46.00 -24.48 -29.88 L1 13.5540 25.61 -6.28 9.86 35.47 3.58 60.00 50.00 -24.53 -46.42 L1 0.5860 27.51 6.89 9.70 37.21 16.59 56.00 46.00 -18.79 -29.41 L2 0.6700 22.59 -8.03 9.69 32.28 1.66 56.00 46.00 -23.72 -44.34 L2 0.9900 21.88 -3.74 9.67 31.55 5.93 56.00 46.00 -24.45 -40.07 L2 1.2020 26.31 -9.38 9.67 35.98 0.29 56.00 46.00 -20.02 -45.71 L2 2.3780 19.67 -11.76 9.71 29.38 -2.05 56.00 46.00 -26.62 -48.05 L2 2.8820 19.63 1.54 9.71 29.34 11.25 56.00 46.00 -26.66 -34.75 L2 Remark: 1. Measuring frequencies from 0.15 MHz to 30MHz. 2. The emissions measured in frequency range from 0.15 MHz to 30MHz were made with an instrument using Quasi-peak detector and average detector. 3. The IF bandwidth of SPA between 0.15MHz and 30MHz was 10kHz; the IF bandwidth of Test Receiver between 0.15MHz and 30MHz was 9kHz; 4. L1 = Line One (Live Line) / L2 = Line Two (Neutral Line) FCC ID: EMJC50-6AT05 Page 18 / 18 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.


Document Created: 2013-08-28 09:45:24
Document Modified: 2013-08-28 09:45:24
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC