Operational Description

FCC ID: ELVMTBA

Operational Description

Download: PDF
FCCID_233109

                                (CARC5HF)
                              Operational Description

The NUTEK CORPORATION Model: CARC5HF (referred to as the EUT in this report)
is a Transmitter of car alarm security system. It offers wireless remote control, ideal for
use in vehicle security system to activate the function of center door lock control system
and car searching except the alarm system.

A major technical descriptions of EUT is described as following:

A). Fundamental Frequency: 433.92 MHz

B). Modulation : Pulse Modulation

C). Antenna Designation: Non-User Replaceable (Fixed)

D). Power Supply: 12V, Battery Operated

E). Receiver type : Superheterodyne


Fundamental Frequency                                  433.92MHz
Power Source                                           12V Battery
Transmitting Time                                      Periodic ≤ 5 seconds
Associated Receiver                                    FCC DOC


The car alarm transmitter is a low powered, hand unit for remote controlling the car
locks and other features. See the function description in attached. The transmitter is
powered by a 12 volt battery. It is designed to operated on a single fixed frequency at
434MHz. See the attached block diagram and schematic.


There are 4 buttons trigger the integrated circuit (IC1) which produces the digital
control signals and will modulate the carrier signal. The carrier signal is generated by
a crystal oscillator/amplifier circuit comprised of a 434MHz crystal(XTAL) and a npn
transmitter(TR1). The modulated output of the RF amplifier stage is coupled to the
PCB strip antenna. The coupling network comprised of C2,C3, C4 and C5. The strip
antenna is attached on PCB permanently around 30mm.


The transmitter is manually operated by the buttons pushed and will automatically
deactivated instant after the button being released. This feature is incorporated by the
IC1 internally.


All tuning and verification are performed by the manufacture and there are no
adjustments can be made by the user. No external ground is required or used with this
transmitter.



Document Created: 2019-09-13 20:34:54
Document Modified: 2019-09-13 20:34:54

© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC