Conducted emissions test report

FCC ID: EJM-IMOTE1

Test Report

Download: PDF
FCCID_760614

Corporate Certification Environmental Labs CCEL FCC Part 15 Class B Emissions Compliance Test Report for Product: iMOTE 1 Oregon Certification & Environmental Lab (OCEL) 5200 NE Elam Young Parkway Hillsboro, OR 97124 Report Number: 06OR174 December 21, 2006

iMOTE 1 Contents 1 EQUIPMENT UNDER TEST............................................................................................................................9 1.1 Condition of EUT upon Laboratory Receipt.........................................................................................................9 1.2 Applicable Model Numbers..................................................................................................................................9 1.3 System Modification.............................................................................................................................................9 2 TEST CONFIGURATION...............................................................................................................................11 2.1 Adapters/ Peripherals/ I/O Devices ...................................................................................................................11 3 CONDUCTED EMISSIONS TEST.................................................................................................................13 3.1 Test Procedure ..................................................................................................................................................13 3.2 Test Instruments ................................................................................................................................................13 3.3 Power Line Conducted Test Data......................................................................................................................14 3.4 Conducted Emission Test Setup Photos ...........................................................................................................19 Page 2 of 20 This report may only be reproduced in its entirety 06OR174

iMOTE 1 Supplemental Information Contents....................................................................................................................................................................2 Supplemental Information .........................................................................................................................................3 Background ...............................................................................................................................................................3 Signatures .................................................................................................................................................................4 Applicant Information ................................................................................................................................................4 Facility Accreditation and Authorization....................................................................................................................5 Disclaimer .................................................................................................................................................................6 Regulatory Compliance Statement ...........................................................................................................................7 Compliance Summary...............................................................................................................................................8 Background This test report documents the results of the electromagnetic compatibility testing performed by Intel Corporation, Oregon Environmental Laboratory. The results contained within this test report pertain only to the equipment under test. Details and results of testing performed on 12/15/06 are contained within. Page 3 of 20 This report may only be reproduced in its entirety 06OR174

iMOTE 1 Signatures To ensure the quality and accuracy of this documentation, the contents and test data have been thoroughly reviewed by the following qualified personnel from the Intel Oregon Environmental Lab. Written By: Heidi Dayoob Signature: Technical Writer Reviewed/ Pete Berquist Signature: Approved By: EMC Engineer Applicant Information Manufactured by: Intel Corporation Applicant: Intel Corporation Product Address: 5200 NE Elam young Parkway Hillsboro, OR 97124 Product: Bluetooth Sensor Model Number: iMOTE 1 Page 4 of 20 This report may only be reproduced in its entirety 06OR174

iMOTE 1 Facility Accreditation and Authorization American Association for Laboratory Accreditation (A2LA) The Intel Corporation OCEL (Oregon Certification and Environmental Lab) is accredited for emissions and immunity testing. The scope of this accreditation is in adherence to the requirements of ISO/IEC 17025: 2005. A2LA Lab Code: 110083, CERT # 1130-01 Federal Communication Commission (FCC) The 3 & 10 meter Open Area Test Site and conducted measurement facilities have been fully described in reports filed with the Federal Communication Commission, and accepted by the FCC in a letter dated May 2002. Registration number: 90687. The Voluntary Control Council for Interference (VCCI) The Intel Corporation OCEL has been accepted as an Associate Member to the VCCI (Voluntary Control Counsel for Interference). The 3 & 10 meter Open Area Test Site radiated measurement facility and conducted measurement facility have been registered in accordance with Regulations for Voluntary Control Measures. Registration number: R-484 and C-500. NEMKO The Intel Corporation OCEL is authorized by NEMKO under the test by manufacturer scheme with Laboratory Authorization number 361 as re-stated in a letter dated December 2005. Registration number: TBM-EMC 361. The data produced by TBM-361 is accepted into the Territory of the Russian Federation. The certificate of accreditation, dated Sept. 10, 1998, was issued by the Certification Body of information, instrumental, medical & electrical equipment on behalf of the Russian Goststandart (GOST R) organization. Through MRA between NEMKO and the current Russian Organization of Certified Bodies, acceptance of data by TBM-361 remains valid for a scope, which includes GOST R 51318.22 and GOST R 50628-95. APEC Conformity Assessment of Telecommunications Equipment This laboratory (identifier# US0069) participates in the NIST phase-1 Laboratory CAB designation for the following economies. Chinese - Taipei BSMI Korea – MIC’s Radio Research Lab Accreditation # SL2-IN-E-1023 The CAB status’ remains in effect while the Laboratory’s A2LA scope of accreditation is valid. Page 5 of 20 This report may only be reproduced in its entirety 06OR174

iMOTE 1 Disclaimer THIS TEST REPORT IS PROVIDED "AS IS" WITH NO WARRANTIES WHATSOEVER, INCLUDING ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR ANY WARRANTY OTHERWISE ARISING OUT OF ANY PROPOSAL, SPECIFICATION OR SAMPLE. Information in this document is provided in connection with Intel products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by the sale of Intel products. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel products are not intended for use in medical, life saving, or life sustaining applications. Intel retains the right to make changes to its test specifications at any time, without notice. The hardware vendor remains solely responsible for the design, sale and functionality of its product, including any liability arising from product infringement or product warranty. Intel, Celeron, Itanium, Pentium, and Xeon are a trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. * Other product and corporate names may be trademarks of other companies and are used only for explanation and to the owners' benefit, without intent to infringe. Copyright © Intel Corporation 2006 Page 6 of 20 This report may only be reproduced in its entirety 06OR174

iMOTE 1 Regulatory Compliance Statement This device, Intel Model: iMOTE 1 complies with the following regulatory standards: FCC 47 CFR Part 15, Subpart B This device, Intel Model: iMOTE 1, complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference. (2) this device must accept any interference received, including interference that may cause undesired operation. Intel Corporation 5200 Elam Young Parkway Hillsboro, Oregon 97124 (503) 696-5257 In addition to the above information, the following text should be placed in the instructions to the user: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. NOTE: Consult the dealer or an experienced radio/TV technician for help. Page 7 of 20 This report may only be reproduced in its entirety 06OR174

iMOTE 1 Compliance Summary Laboratory Receipt Date Of Sample: 12/15/06 The results contained within this test report pertain only to the equipment under test (EUT). Power Line Conducted Emissions Test: Laboratory Job Number: 06-2600-OR Date of Test: 12/15/06 Judgment: 120VAC / 60Hz Passed by 8.6 dBμV Measured Results Line 1 Tested by: Mike Haines Signature: Page 8 of 20 This report may only be reproduced in its entirety 06OR174

iMOTE 1 1 Equipment Under Test The EUT is an Intel® Bluetooth transmitter model iMOTE 1. 1.1 Condition of EUT upon Laboratory Receipt The laboratory received the EUT in an operational condition. 1.2 Applicable Model Numbers Additional model numbers encompassed by the findings documented in this report: • N/A 1.3 System Modification Use of EMI suppression devices was not required to achieve regulatory compliance therefore; the EUT was tested as received. Page 9 of 20 This report may only be reproduced in its entirety 06OR174

iMOTE 1 Table 1. Hardware Internal to the EUT Description Manufacturer Model Number Serial Number Bluetooth Beacon Intel IMOTE1 87348 Page 10 of 20 This report may only be reproduced in its entirety 06OR174

iMOTE 1 2 Test Configuration Pre-scans of the EUT were performed in a 3 meter semi-anechoic chamber to investigate the worst case of cable placement, video resolution and refresh rate. All test data in this report refers to the established worst-case configuration. 2.1 Adapters/ Peripherals/ I/O Devices The peripheral devices and cables (external of the EUT) used during testing are reflected in the table and diagram below. Table 2. Peripherals and I/O Cables External of the EUT Diagram Description Manufacturer Model Serial Cable Description Number Number B AC-DC-USB Dynex DX-IPAC GWKS 6J06 No Cable Adapter C USB to mini- ---------- ---------- ---------- No Cable USB Adapter S LAN Hub LinkSys SD2008 REE105600 6.0m unshielded LAN cable w/o 0965 ferrite. T Client PC IBM T30 78-FDAP2 1.0m unshielded LAN cable w/o ferrite. Page 11 of 20 This report may only be reproduced in its entirety 06OR174

iMOTE 1 Diagram 1 Test Setup Block Diagram Page 12 of 20 This report may only be reproduced in its entirety 06OR174

iMOTE 1 3 Conducted Emissions Test Power line conducted data was taken with the test methodologies stated in FCC 47 CFR Part 15, Subpart B. No modifications or deviations from the test methods were implemented to achieve regulatory compliance. 3.1 Test Procedure Using the spectrum analyzer mode of the receiver, peaks of the disturbances are identified by sweeping from 0.15 to 30 MHz of the spectrum. The sweeps are repeated fifty times, capturing the maximum emission during that time period. Based on those peak disturbances, the maximum quasi-peak and average emission is measure by scanning across the peak disturbances in the EMI receiver mode. Both AC lines are measured and reported independently. The frequency and amplitude of the highest six emissions are reported. A LISN was used to test the power line ports. 3.2 Test Instruments The following table contains detailed information of the lab test equipment utilized during conducted emissions testing. Table 3. Conducted Emissions Test Equipment Equipment Manufacturer/ Model Number Serial Number Calibration Due Receiver Rohde & Schwarz ESBI 8400498/024 09-27-2007 1005.4000.52 LISN Fischer Custom Communications 04014 04-27-2007 FCC-LISN-50-25-2 Page 13 of 20 This report may only be reproduced in its entirety 06OR174

iMOTE 1 3.3 Power Line Conducted Test Data Temperature: 24°C Relative Humidity: 23 % 3.3.1 120VAC/60Hz Measured Test Data EUT Input Power for Test: 120VAC/ 60Hz Test Method: ANSI C63.4 Specification Limits: FCC, Class B Judgment: Passed by –8.6 dB(uV), Line 1 Intel Conducted Emissions Results Report Oregon Certification & Environmental Lab EUT: Imote 1 Manufacturer: Intel Corporation Operating Condition: 120 VAC/60 Hz Line 1 Test Site: OCEL-06-2600-OR Operator: Mike Haines Test Specification: CISPR 22 B Comment: EUT operating normally Start of Test: 12/15/2006 / 10:35:21AM SCAN TABLE: "Mains LISN" Short Description: EN 55022 Voltage Start Stop Step Detector Meas. IF Transducer Frequency Frequency Width Time Bandw. 150.0 kHz 30.0 MHz 5.0 kHz MaxPeak 20.0 ms 10 kHz None Average Page 14 of 20 This report may only be reproduced in its entirety 06OR174

iMOTE 1 Level [dBµV] 70 60 50 40 xx x x x x 30 20 10 150k 300k 500k 1M 2M 3M 5M 7M 10M 30M Frequency [Hz] x MES 120 L1_fin QP x MES 120 L1_fin AV MES 120 L1_pre PK LIM EN 55022B Mains QP Voltage QP Limit LIM EN 55022B Mains AV Voltage AV Limit Page 15 of 20 This report may only be reproduced in its entirety 06OR174

iMOTE 1 MEASUREMENT RESULT: "120 L1_fin QP" 12/15/2006 10:39AM Frequency Level Transd Limit Margin Line PE MHz dBµV dB dBµV dB 0.550000 37.30 0.3 56 -18.7 L1 GND 1.835000 37.20 0.2 56 -18.8 L1 GND 2.610000 37.20 0.2 56 -18.8 L1 GND 6.190000 37.20 0.2 60 -22.8 L1 GND 6.255000 37.20 0.2 60 -22.8 L1 GND 24.000000 37.40 0.4 60 -22.6 L1 GND MEASUREMENT RESULT: "120 L1_fin AV" 12/15/2006 10:39AM Frequency Level Transd Limit Margin Line PE MHz dBµV dB dBµV dB 0.500000 37.40 0.4 46 -8.6 L1 GND 1.835000 37.20 0.2 46 -8.8 L1 GND 2.610000 37.20 0.2 46 -8.8 L1 GND 6.190000 37.20 0.2 50 -12.8 L1 GND 6.255000 37.20 0.2 50 -12.8 L1 GND 24.000000 37.40 0.4 50 -12.6 L1 GND Intel Conducted Emissions Results Report Oregon Certification & Environmental Lab EUT: Imote 1 Manufacturer: Intel Corporation Operating Condition: 120 VAC/60 Hz Line 2 Test Site: OCEL-06-2600-OR Operator: Mike Haines Test Specification: CISPR 22 B Comment: EUT operating normally Start of Test: 12/15/2006 / 10:41:37AM SCAN TABLE: "Mains LISN" Short Description: EN 55022 Voltage Start Stop Step Detector Meas. IF Transducer Frequency Frequency Width Time Bandw. 150.0 kHz 30.0 MHz 5.0 kHz MaxPeak 20.0 ms 10 kHz None Average Page 16 of 20 This report may only be reproduced in its entirety 06OR174

iMOTE 1 Level [dBµV] 70 60 50 40 xx x x xxx 30 20 10 150k 300k 500k 1M 2M 3M 5M 7M 10M 30M Frequency [Hz] x MES 120 L2_fin QP x MES 120 L2_fin AV MES 120 L2_pre PK LIM EN 55022B Mains QP Voltage QP Limit LIM EN 55022B Mains AV Voltage AV Limit Page 17 of 20 This report may only be reproduced in its entirety 06OR174

iMOTE 1 MEASUREMENT RESULT: "120 L2_fin QP" 12/15/2006 10:45AM Frequency Level Transd Limit Margin Line PE MHz dBµV dB dBµV dB 0.490000 37.40 0.4 56 -18.8 L2 GND 1.820000 37.20 0.2 56 -18.8 L2 GND 2.640000 37.20 0.2 56 -18.8 L2 GND 5.360000 37.20 0.2 60 -22.8 L2 GND 5.660000 37.20 0.2 60 -22.8 L2 GND 5.795000 37.20 0.2 60 -22.8 L2 GND MEASUREMENT RESULT: "120 L2_fin AV" 12/15/2006 10:45AM Frequency Level Transd Limit Margin Line PE MHz dBµV dB dBµV dB 0.500000 37.40 0.4 46 -8.6 L2 GND 1.805000 37.20 0.2 46 -8.8 L2 GND 2.640000 37.20 0.2 46 -8.8 L2 GND 5.360000 37.20 0.2 50 -12.8 L2 GND 5.660000 37.20 0.2 50 -12.8 L2 GND 5.795000 37.20 0.2 50 -12.8 L2 GND Page 18 of 20 This report may only be reproduced in its entirety 06OR174

iMOTE 1 3.4 Conducted Emission Test Setup Photos Test Setup, Front View Page 19 of 20 This report may only be reproduced in its entirety 06OR174

iMOTE 1 Test Setup, Rear View Page 20 of 20 This report may only be reproduced in its entirety 06OR174


Document Created: 2006-12-21 13:55:56
Document Modified: 2006-12-21 13:55:56
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC