DIPOLE CALIBRATION

FCC ID: EJE-WB0046

RF Exposure Info

Download: PDF
FCCID_795785


Measurement Conditions DASY system configuration, as far as not iven on page 1. DASY Version DASY4 V4.7 Extrapolation Advanced Extrapolation Phantom Modular Flat Phantom V5.0 Distance Dipole Center — TS 10 mm with Spacer Zoom Scan Resolution dx, dy, dz =5 mm Frequency 2450 MHz + 1 MHz Head TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 30.2 1.80 mhoim Measured Head TSL parameters (22.0 £.0.2)°C 37.7 46 % 1.77 mholm £ 6 % Head TSL temperature during test (21.8 £0.2) °C —— ——— SAR result with Head TSL SAR averaged over 1 cm‘ (1 g) of Head TSL condition SAR measured 250 mW input power 13.5 mW /g SAR normalized normalized to 1W 54.0 mW /g SAR for nominal Head TSL parameters i normalized to 1W 53.3 mW / g £ 17.0 % (k=2) SAR averaged over 10 cm‘ (10 g) of Head TSL condition SAR measured 250 mW input power 6.24 mW /g SAR normalized normalized to 1W 25.0 mW /g SAR for nominal Head TSL parameters 1 normalized to 1W 24.7 mW / g £ 16.5 % (k=2) " Correction to nominal TSL parameters according to d), chapter "SAR Sensitivities® Certificate No: D2450V2—724_Dec06 Page 3 of 6



Document Created: 2007-05-09 11:08:57
Document Modified: 2007-05-09 11:08:57
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC