SAR Report 3

FCC ID: EHTDECT1

RF Exposure Info

Download: PDF
FCCID_808601

DAT-P-152/98-01 Appendix for the Report Dosimetric Assessment of the Mitel Cordless Handset (FCC ID: EHTDECT1) According to the FCC Requirements SAR Distribution Plots May 21, 2007 IMST GmbH Carl-Friedrich-Gauß-Str. 2 D-47475 Kamp-Lintfort dasy_report_fcc_DECT_1900_plots_1.0.doc/110.05.2006/ABo Customer Nemko AS Gasevikveien 8 N-22027 Kjeller The test results only relate to the items tested. This report shall not be reproduced except in full without the written approval of the testing laboratory. SAR Report_Nemko_6620_636_FCC_DECT_SAR Plots_Mitel_Handset Page 1 of 11

SAR Report_Nemko_6620_636_FCC_DECT_SAR Plots_Mitel_Handset Page 2 of 11 Table of Contents 1 SAR DISTRIBUTION PLOTS, HEAD MEASUREMENTS, ANTENNA 1................................................ 3 2 SAR DISTRIBUTION PLOTS, HEAD MEASUREMENTS, ANTENNA 2................................................ 7 3 SAR Z-AXIS SCANS (VALIDATION) ......................................................................................................... 11 4 SAR Z-AXIS SCANS (MEASUREMENTS)................................................................................................ 11 dasy_report_fcc_DECT_1900_plots_1.0.doc/110.05.2006/ABo

SAR Report_Nemko_6620_636_FCC_DECT_SAR Plots_Mitel_Handset Page 3 of 11 1 SAR Distribution Plots, Head Measurements, Antenna 1 Test Laboratory: Imst GmbH, DASY Yellow (II); File Name: 5330_handset_yplm_1_Ant1.da4 DUT: MITEL; Type: Corless Handset Program Name: Cheek Left Communication System: DECT US; Frequency: 1924.99 MHz;Duty Cycle: 1:12 Medium parameters used (extrapolated): f = 1924.99 MHz; σ = 1.42 mho/m; εr = 40.4; ρ = 1000 kg/m3 Phantom section: Left Section DASY4 Configuration: - Probe: EX3DV4 - SN3536; ConvF(8.19, 8.19, 8.19); Calibrated: 27.09.2006 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn631; Calibrated: 11.07.2006 - Phantom: SAM Glycol 1340; Type: QD 000 P40 CB; Serial: TP-1340 - Measurement SW: DASY4, V4.7 Build 53; Postprocessing SW: SEMCAD, V1.8 Build 172 Cheek Left/Area Scan (8x17x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.001 mW/g Cheek Left/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Peak SAR (extrapolated) = 0.000 W/kg SAR(1 g) = n.a. ; SAR(10 g) = n.a. dasy_report_fcc_DECT_1900_plots_1.0.doc/110.05.2006/ABo Fig. 1: SAR distribution for DECT US, channel 2, cheek position, left side of head (May 15, 2007; Ambient Temperature: 21.9°C; Liquid Temperature: 21.0°C).

SAR Report_Nemko_6620_636_FCC_DECT_SAR Plots_Mitel_Handset Page 4 of 11 Test Laboratory: Imst GmbH, DASY Yellow (II); File Name: 5330_handset_yplm_2_Ant1.da4 DUT: MITEL; Type: Corless Handset Program Name: Tilted Left Communication System: DECT US; Frequency: 1924.99 MHz;Duty Cycle: 1:12 Medium parameters used (extrapolated): f = 1924.99 MHz; σ = 1.42 mho/m; εr = 40.4; ρ = 1000 kg/m3 Phantom section: Left Section DASY4 Configuration: - Probe: EX3DV4 - SN3536; ConvF(8.19, 8.19, 8.19); Calibrated: 27.09.2006 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn631; Calibrated: 11.07.2006 - Phantom: SAM Glycol 1340; Type: QD 000 P40 CB; Serial: TP-1340 - Measurement SW: DASY4, V4.7 Build 53; Postprocessing SW: SEMCAD, V1.8 Build 172 Tilted Left/Area Scan (8x17x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.001 mW/g Tilted Left/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Peak SAR (extrapolated) = 0.002 W/kg SAR(1 g) = n.a. ; SAR(10 g) = n.a. dasy_report_fcc_DECT_1900_plots_1.0.doc/110.05.2006/ABo Fig. 2: SAR distribution for DECT US, channel 2, tilted position, left side of head (May 15, 2007; Ambient Temperature: 21.9°C; Liquid Temperature: 21.0°C).

SAR Report_Nemko_6620_636_FCC_DECT_SAR Plots_Mitel_Handset Page 5 of 11 Test Laboratory: Imst GmbH, DASY Yellow (II); File Name: 5330_handset_yprm_1_Ant1.da4 DUT: MITEL; Type: Corless Handset Program Name: Cheek Right Communication System: DECT US; Frequency: 1924.99 MHz;Duty Cycle: 1:12 Medium parameters used (extrapolated): f = 1924.99 MHz; σ = 1.42 mho/m; εr = 40.4; ρ = 1000 kg/m3 Phantom section: Right Section DASY4 Configuration: - Probe: EX3DV4 - SN3536; ConvF(8.19, 8.19, 8.19); Calibrated: 27.09.2006 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn631; Calibrated: 11.07.2006 - Phantom: SAM Glycol 1340; Type: QD 000 P40 CB; Serial: TP-1340 - Measurement SW: DASY4, V4.7 Build 53; Postprocessing SW: SEMCAD, V1.8 Build 172 Cheek Right/Area Scan (8x17x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.001 mW/g Cheek Right/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Peak SAR (extrapolated) = 0.000 W/kg SAR(1 g) = n.a. ; SAR(10 g) = n.a. dasy_report_fcc_DECT_1900_plots_1.0.doc/110.05.2006/ABo Fig. 3: SAR distribution for DECT US, channel 2, cheek position, right side of head (May 15, 2007; Ambient Temperature: 21.9°C; Liquid Temperature: 21.0°C).

SAR Report_Nemko_6620_636_FCC_DECT_SAR Plots_Mitel_Handset Page 6 of 11 Test Laboratory: Imst GmbH, DASY Yellow (II); File Name: 5330_handset_yprm_2_Ant1.da4 DUT: MITEL; Type: Corless Handset Program Name: Tilted Right Communication System: DECT US; Frequency: 1924.99 MHz;Duty Cycle: 1:12 Medium parameters used (extrapolated): f = 1924.99 MHz; σ = 1.42 mho/m; εr = 40.4; ρ = 1000 kg/m3 Phantom section: Right Section DASY4 Configuration: - Probe: EX3DV4 - SN3536; ConvF(8.19, 8.19, 8.19); Calibrated: 27.09.2006 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn631; Calibrated: 11.07.2006 - Phantom: SAM Glycol 1340; Type: QD 000 P40 CB; Serial: TP-1340 - Measurement SW: DASY4, V4.7 Build 53; Postprocessing SW: SEMCAD, V1.8 Build 172 Tilted Right/Area Scan (8x17x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.001 mW/g Tilted Right/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Peak SAR (extrapolated) = 0.002 W/kg SAR(1 g) = n.a. ; SAR(10 g) = n.a. dasy_report_fcc_DECT_1900_plots_1.0.doc/110.05.2006/ABo Fig. 4: SAR distribution for DECT US, channel 2, tilted position, right side of head (May 15, 2007; Ambient Temperature: 21.9°C; Liquid Temperature: 21.0°C)

SAR Report_Nemko_6620_636_FCC_DECT_SAR Plots_Mitel_Handset Page 7 of 11 2 SAR Distribution Plots, Head Measurements, Antenna 2 Test Laboratory: Imst GmbH, DASY Yellow (II); File Name: 5330_handset_yplm_1_Ant2.da4 DUT: MITEL; Type: Corless Handset Program Name: Cheek Left Communication System: DECT US; Frequency: 1924.99 MHz;Duty Cycle: 1:12 Medium parameters used (extrapolated): f = 1924.99 MHz; σ = 1.42 mho/m; εr = 40.4; ρ = 1000 kg/m3 Phantom section: Left Section DASY4 Configuration: - Probe: EX3DV4 - SN3536; ConvF(8.19, 8.19, 8.19); Calibrated: 27.09.2006 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn631; Calibrated: 11.07.2006 - Phantom: SAM Glycol 1340; Type: QD 000 P40 CB; Serial: TP-1340 - Measurement SW: DASY4, V4.7 Build 53; Postprocessing SW: SEMCAD, V1.8 Build 172 Cheek Left/Area Scan (8x17x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.001 mW/g Cheek Left/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Peak SAR (extrapolated) = 0.002 W/kg SAR(1 g) = n.a. ; SAR(10 g) = n.a. dasy_report_fcc_DECT_1900_plots_1.0.doc/110.05.2006/ABo Fig. 5: SAR distribution for DECT US, channel 2, cheek position, left side of head (May 15, 2007; Ambient Temperature: 21.9°C; Liquid Temperature: 21.0°C).

SAR Report_Nemko_6620_636_FCC_DECT_SAR Plots_Mitel_Handset Page 8 of 11 Test Laboratory: Imst GmbH, DASY Yellow (II); File Name: 5330_handset_yplm_2_Ant2.da4 DUT: MITEL; Type: Corless Handset Program Name: Tilted Left Communication System: DECT US; Frequency: 1924.99 MHz;Duty Cycle: 1:12 Medium parameters used (extrapolated): f = 1924.99 MHz; σ = 1.42 mho/m; εr = 40.4; ρ = 1000 kg/m3 Phantom section: Left Section DASY4 Configuration: - Probe: EX3DV4 - SN3536; ConvF(8.19, 8.19, 8.19); Calibrated: 27.09.2006 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn631; Calibrated: 11.07.2006 - Phantom: SAM Glycol 1340; Type: QD 000 P40 CB; Serial: TP-1340 - Measurement SW: DASY4, V4.7 Build 53; Postprocessing SW: SEMCAD, V1.8 Build 172 Tilted Left/Area Scan (8x17x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.002 mW/g Tilted Left/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Peak SAR (extrapolated) = 0.051 W/kg SAR(1 g) = n.a. ; SAR(10 g) = n.a. Maximum value of SAR (measured) = 0.001 mW/g dasy_report_fcc_DECT_1900_plots_1.0.doc/110.05.2006/ABo Fig. 6: SAR distribution for DECT US, channel 2, tilted position, left side of head (May 15, 2007; Ambient Temperature: 21.9°C; Liquid Temperature: 21.0°C).

SAR Report_Nemko_6620_636_FCC_DECT_SAR Plots_Mitel_Handset Page 9 of 11 Test Laboratory: Imst GmbH, DASY Yellow (II); File Name: 5330_handset_yprm_1_Ant2.da4 DUT: MITEL; Type: Corless Handset Program Name: Cheek Right Communication System: DECT US; Frequency: 1924.99 MHz;Duty Cycle: 1:12 Medium parameters used (extrapolated): f = 1924.99 MHz; σ = 1.42 mho/m; εr = 40.4; ρ = 1000 kg/m3 Phantom section: Right Section DASY4 Configuration: - Probe: EX3DV4 - SN3536; ConvF(8.19, 8.19, 8.19); Calibrated: 27.09.2006 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn631; Calibrated: 11.07.2006 - Phantom: SAM Glycol 1340; Type: QD 000 P40 CB; Serial: TP-1340 - Measurement SW: DASY4, V4.7 Build 53; Postprocessing SW: SEMCAD, V1.8 Build 172 Cheek Right/Area Scan (8x17x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.001 mW/g Cheek Right/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Peak SAR (extrapolated) = 0.001 W/kg SAR(1 g) = n.a. ; SAR(10 g) = n.a. dasy_report_fcc_DECT_1900_plots_1.0.doc/110.05.2006/ABo Fig. 7: SAR distribution for DECT US, channel 2, cheek position, right side of head (May 15, 2007; Ambient Temperature: 21.9°C; Liquid Temperature: 21.0°C).

SAR Report_Nemko_6620_636_FCC_DECT_SAR Plots_Mitel_Handset Page 10 of 11 Test Laboratory: Imst GmbH, DASY Yellow (II); File Name: 5330_handset_yprm_2_Ant2.da4 DUT: MITEL; Type: Corless Handset Program Name: Tilted Right Communication System: DECT US; Frequency: 1924.99 MHz;Duty Cycle: 1:12 Medium parameters used (extrapolated): f = 1924.99 MHz; σ = 1.42 mho/m; εr = 40.4; ρ = 1000 kg/m3 Phantom section: Right Section DASY4 Configuration: - Probe: EX3DV4 - SN3536; ConvF(8.19, 8.19, 8.19); Calibrated: 27.09.2006 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn631; Calibrated: 11.07.2006 - Phantom: SAM Glycol 1340; Type: QD 000 P40 CB; Serial: TP-1340 - Measurement SW: DASY4, V4.7 Build 53; Postprocessing SW: SEMCAD, V1.8 Build 172 Tilted Right/Area Scan (8x17x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.001 mW/g Tilted Right/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Peak SAR (extrapolated) = 0.001 W/kg SAR(1 g) = n.a. ; SAR(10 g) = n.a. dasy_report_fcc_DECT_1900_plots_1.0.doc/110.05.2006/ABo Fig. 8: SAR distribution for DECT US, channel 2, tilted position, right side of head (May 15, 2007; Ambient Temperature: 21.9°C; Liquid Temperature: 21.0°C)

SAR Report_Nemko_6620_636_FCC_DECT_SAR Plots_Mitel_Handset Page 11 of 11 3 SAR z-axis scans (Validation) Fig. 9: SAR versus liquid depth, 1900 MHz, head (May 15, 2007; Ambient Temperature: 21.8° C; Liquid Temperature : 21.0° C). 4 SAR z-axis scans (Measurements) Due to the not detectable values, plots were not listed dasy_report_fcc_DECT_1900_plots_1.0.doc/110.05.2006/ABo


Document Created: 2007-05-22 11:35:38
Document Modified: 2007-05-22 11:35:38
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC