SAR Report 2 of 8

FCC ID: EHABTS080

RF Exposure Info

Download: PDF
FCCID_530733

Date/Time: 3/24/2005 11:38:12 AMDate/Time: 3/24/2005 11:50:02 AM Test Laboratory: Compliance Certification Services 1_Left hand side DUT: Intermec Technologies Corporation; Type: 700C; Serial: 18190400042 (with 802.11bg, GSM and Bluetooth) Communication System: GSM850; Frequency: 836.4 MHz;Duty Cycle: 1:8 Medium parameters used (interpolated): f = 836.4 MHz; σ = 0.938 mho/m; εr = 41.5; ρ = 1000 kg/m3 Phantom section: Left Section Room Ambient Temperature: 23.5 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(10.7, 10.7, 10.7); Calibrated: 7/18/2004 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 2; Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 Tilt position_M-ch/Area Scan (9x15x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.220 mW/g Tilt position_M-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 9.00 V/m; Power Drift = -0.171 dB Peak SAR (extrapolated) = 0.265 W/kg SAR(1 g) = 0.205 mW/g; SAR(10 g) = 0.150 mW/g Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.233 mW/g 0 dB = 0.233mW/g

Date/Time: 3/24/2005 11:56:34 AM Test Laboratory: Compliance Certification Services 1_Left hand side DUT: Intermec Technologies Corporation; Type: 700C; Serial: 18190400042 (with 802.11bg, GSM and Bluetooth) Communication System: GSM850; Frequency: 836.4 MHz;Duty Cycle: 1:8 Tilt position_M-ch/Z Scan (1x1x41): Measurement grid: dx=20mm, dy=20mm, dz=2.5mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.205 mW/g

Date/Time: 3/29/2005 3:00:20 PMDate/Time: 3/29/2005 3:09:17 PM Test Laboratory: Compliance Certification Services 1_Left hand side DUT: Intermec Technologies Corporation; Type: 700C; Serial: 18190400042 (with 802.11bg, GSM and Bluetooth) Communication System: 802.11bg; Frequency: 2437 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2437 MHz; σ = 1.86 mho/m; εr = 39.6; ρ = 1000 kg/m3 Phantom section: Left Section Room Ambient Temperature: 23.5 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.11, 8.11, 8.11); Calibrated: 7/18/2004 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 2; Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 Tilt position_M-ch/Area Scan (9x11x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.126 mW/g Tilt position_M-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 1.69 V/m; Power Drift = -0.155 dB Peak SAR (extrapolated) = 0.182 W/kg SAR(1 g) = 0.095 mW/g; SAR(10 g) = 0.047 mW/g Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.129 mW/g 0 dB = 0.129mW/g

Date/Time: 3/29/2005 3:41:49 PMDate/Time: 3/29/2005 3:50:46 PM Test Laboratory: Compliance Certification Services 1_Left hand side DUT: Intermec Technologies Corporation; Type: 700C; Serial: 18190400042 (with 802.11bg, GSM and Bluetooth) Communication System: Bluetooth; Frequency: 2441 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2441 MHz; σ = 1.87 mho/m; εr = 39.5; ρ = 1000 kg/m3 Phantom section: Left Section Room Ambient Temperature: 23.5 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.11, 8.11, 8.11); Calibrated: 7/18/2004 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 2; Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 Tilt position_M-ch/Area Scan (9x11x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.00 mW/g Tilt position_M-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 0.455 V/m; Power Drift = -0.154 dB Peak SAR (extrapolated) = 0.012 W/kg SAR(1 g) = 0.0029 mW/g; SAR(10 g) = 0.00133 mW/g Info: Interpolated medium parameters used for SAR evaluation!

Date/Time: 3/29/2005 8:00:57 PMDate/Time: 3/29/2005 8:12:07 PM Test Laboratory: Compliance Certification Services 1_Left hand side DUT: Intermec Technologies Corporation; Type: 700C; Serial: 18190400042 (with 802.11bg, GSM and Bluetooth) Communication System: DCS 1900; Frequency: 1880 MHz;Duty Cycle: 1:8 Medium parameters used: f = 1880 MHz; σ = 1.41 mho/m; εr = 41.9; ρ = 1000 kg/m3 Phantom section: Left Section Room Ambient Temperature: 23.5 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.98, 8.98, 8.98); Calibrated: 7/18/2004 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 2; Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 Tilt position_M-ch/Area Scan (9x15x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.115 mW/g Tilt position_M-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 4.69 V/m; Power Drift = -0.216 dB Peak SAR (extrapolated) = 0.150 W/kg SAR(1 g) = 0.103 mW/g; SAR(10 g) = 0.065 mW/g Maximum value of SAR (measured) = 0.125 mW/g 0 dB = 0.125mW/g

Date/Time: 3/24/2005 10:58:01 AMDate/Time: 3/24/2005 11:09:01 AM Test Laboratory: Compliance Certification Services 2_Right hand side DUT: Intermec Technologies Corporation; Type: 700C; Serial: 18190400042 (with 802.11bg, GSM and Bluetooth) Communication System: GSM850; Frequency: 848.8 MHz;Duty Cycle: 1:8 Medium parameters used (interpolated): f = 848.8 MHz; σ = 0.948 mho/m; εr = 41.3; ρ = 1000 kg/m3 Phantom section: Right Section Room Ambient Temperature: 23.5 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(10.7, 10.7, 10.7); Calibrated: 7/18/2004 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 2; Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 Tilt position_H-ch/Area Scan (9x15x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.438 mW/g Tilt position_H-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 11.3 V/m; Power Drift = -0.120 dB Peak SAR (extrapolated) = 0.534 W/kg SAR(1 g) = 0.387 mW/g; SAR(10 g) = 0.266 mW/g Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.453 mW/g 0 dB = 0.453mW/g

Date/Time: 3/24/2005 11:15:40 AM Test Laboratory: Compliance Certification Services 2_Right hand side DUT: Intermec Technologies Corporation; Type: 700C; Serial: 18190400042 (with 802.11bg, GSM and Bluetooth) Communication System: GSM850; Frequency: 848.8 MHz;Duty Cycle: 1:8 Tilt position_H-ch/Z Scan (1x1x41): Measurement grid: dx=20mm, dy=20mm, dz=2.5mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.461 mW/g

Date/Time: 3/29/2005 2:05:05 PMDate/Time: 3/29/2005 2:13:40 PM Test Laboratory: Compliance Certification Services 2_Right hand side DUT: Intermec Technologies Corporation; Type: 700C; Serial: 18190400042 (with 802.11bg, GSM and Bluetooth) Communication System: 802.11bg; Frequency: 2437 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2437 MHz; σ = 1.86 mho/m; εr = 39.6; ρ = 1000 kg/m3 Phantom section: Right Section Room Ambient Temperature: 23.5 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.11, 8.11, 8.11); Calibrated: 7/18/2004 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 2; Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 Tilt position_M-ch/Area Scan (9x11x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.053 mW/g Tilt position_M-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 1.25 V/m; Power Drift = -0.041 dB Peak SAR (extrapolated) = 0.073 W/kg SAR(1 g) = 0.041 mW/g; SAR(10 g) = 0.022 mW/g Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.054 mW/g 0 dB = 0.054mW/g

Date/Time: 3/29/2005 2:32:58 PMDate/Time: 3/29/2005 2:41:32 PM Test Laboratory: Compliance Certification Services 2_Right hand side DUT: Intermec Technologies Corporation; Type: 700C; Serial: 18190400042 (with 802.11bg, GSM and Bluetooth) Communication System: Bluetooth; Frequency: 2441 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2441 MHz; σ = 1.87 mho/m; εr = 39.5; ρ = 1000 kg/m3 Phantom section: Right Section Room Ambient Temperature: 23.5 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.11, 8.11, 8.11); Calibrated: 7/18/2004 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 2; Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 Tilt position_M-ch/Area Scan (9x11x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.00 mW/g Tilt position_M-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 0.563 V/m; Power Drift = -0.271 dB Peak SAR (extrapolated) = 0.011 W/kg SAR(1 g) = 0.00366 mW/g; SAR(10 g) = 0.00161 mW/g Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.01 mW/g 0 dB = 0.010mW/g

Date/Time: 3/29/2005 9:40:27 PMDate/Time: 3/29/2005 9:52:33 PM Test Laboratory: Compliance Certification Services 1_Right hand side DUT: Intermec Technologies Corporation; Type: 700C; Serial: 18190400042 (with 802.11bg, GSM and Bluetooth) Communication System: DCS 1900; Frequency: 1880 MHz;Duty Cycle: 1:8 Medium parameters used: f = 1880 MHz; σ = 1.41 mho/m; εr = 41.9; ρ = 1000 kg/m3 Phantom section: Right Section Room Ambient Temperature: 23.5 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.98, 8.98, 8.98); Calibrated: 7/18/2004 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 2; Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 Tilt position_L-ch/Area Scan (9x14x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.201 mW/g Tilt position_L-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 4.61 V/m; Power Drift = -0.126 dB Peak SAR (extrapolated) = 0.253 W/kg SAR(1 g) = 0.169 mW/g; SAR(10 g) = 0.105 mW/g Maximum value of SAR (measured) = 0.207 mW/g 0 dB = 0.207mW/g

Date/Time: 3/24/2005 3:17:43 PMDate/Time: 3/24/2005 3:30:51 PM Test Laboratory: Compliance Certification Services 3_Body Worn - With holster (815-047-002) left DUT: Intermec Technologies Corporation; Type: 700C; Serial: 18190400042 (with 802.11bg, GSM and Bluetooth) Communication System: GSM850; Frequency: 836.4 MHz;Duty Cycle: 1:4 Medium parameters used (interpolated): f = 836.4 MHz; σ = 1 mho/m; εr = 57.1; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 23.5 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(10.5, 10.5, 10.5); Calibrated: 7/18/2004 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 1; Type: SAM 1; Serial: 1185 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 M-ch/Area Scan (9x17x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.343 mW/g M-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 13.4 V/m; Power Drift = -0.239 dB Peak SAR (extrapolated) = 0.475 W/kg SAR(1 g) = 0.335 mW/g; SAR(10 g) = 0.223 mW/g Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.402 mW/g 0 dB = 0.402mW/g

Date/Time: 3/24/2005 3:37:40 PM Test Laboratory: Compliance Certification Services 3_Body Worn - With holster (815-047-002) left DUT: Intermec Technologies Corporation; Type: 700C; Serial: 18190400042 (with 802.11bg, GSM and Bluetooth) Communication System: GSM850; Frequency: 836.4 MHz;Duty Cycle: 1:4 M-ch/Z Scan (1x1x41): Measurement grid: dx=20mm, dy=20mm, dz=2.5mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.411 mW/g

Date/Time: 3/29/2005 5:59:59 PMDate/Time: 3/29/2005 6:11:38 PM Test Laboratory: Compliance Certification Services 3_Body Worn - With holster (815-047-002) left DUT: Intermec Technologies Corporation; Type: 700C; Serial: 18190400042 (with 802.11bg, GSM and Bluetooth) Communication System: 802.11bg; Frequency: 2437 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2437 MHz; σ = 2 mho/m; εr = 52.6; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 23.5 deg. C; Liquid Temperature: 24.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.32, 8.32, 8.32); Calibrated: 7/18/2004 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 1; Type: SAM 1; Serial: 1185 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 M-ch/Area Scan (10x13x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.012 mW/g M-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 2.41 V/m; Power Drift = -0.171 dB Peak SAR (extrapolated) = 0.026 W/kg SAR(1 g) = 0.00973 mW/g; SAR(10 g) = 0.005 mW/g Info: Interpolated medium parameters used for SAR evaluation! 0 dB = 0.012mW/g

Date/Time: 3/29/2005 5:08:08 PMDate/Time: 3/29/2005 5:20:22 PM Test Laboratory: Compliance Certification Services 3_Body Worn - With holster (815-047-002) left DUT: Intermec Technologies Corporation; Type: 700C; Serial: 18190400042 (with 802.11bg, GSM and Bluetooth) Communication System: Bluetooth; Frequency: 2441 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2441 MHz; σ = 2.01 mho/m; εr = 52.6; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 23.5 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.32, 8.32, 8.32); Calibrated: 7/18/2004 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 1; Type: SAM 1; Serial: 1185 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 L-ch/Area Scan (10x13x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.00 mW/g L-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 1.15 V/m; Power Drift = -0.187 dB Peak SAR (extrapolated) = 0.011 W/kg SAR(1 g) = 0.00337 mW/g; SAR(10 g) = 0.00145 mW/g Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.01 mW/g 0 dB = 0.010mW/g

Date/Time: 3/29/2005 10:16:48 PMDate/Time: 3/29/2005 10:28:16 PM Test Laboratory: Compliance Certification Services 3_Body Worn - With holster (815-047-002) left DUT: Intermec Technologies Corporation; Type: 700C; Serial: 18190400042 (with 802.11bg, GSM and Bluetooth) Communication System: DCS 1900; Frequency: 1880 MHz;Duty Cycle: 1:4 Medium parameters used: f = 1880 MHz; σ = 1.52 mho/m; εr = 53.6; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 23.5 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.1, 8.1, 8.1); Calibrated: 7/18/2004 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 1; Type: SAM 1; Serial: 1185 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 M-ch/Area Scan (9x14x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.202 mW/g M-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 6.01 V/m; Power Drift = -0.150 dB Peak SAR (extrapolated) = 0.271 W/kg SAR(1 g) = 0.188 mW/g; SAR(10 g) = 0.121 mW/g Maximum value of SAR (measured) = 0.229 mW/g 0 dB = 0.229mW/g

Date/Time: 3/24/2005 5:50:06 PMDate/Time: 3/24/2005 6:16:46 PM Test Laboratory: Compliance Certification Services 4_Body Worn - With Holster (815-047-001) DUT: Intermec Technologies Corporation; Type: 700C; Serial: 18190400042 (with 802.11bg, GSM and Bluetooth) Communication System: GSM850; Frequency: 836.4 MHz;Duty Cycle: 1:4 Medium parameters used (interpolated): f = 836.4 MHz; σ = 1 mho/m; εr = 57.1; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 23.5 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(10.5, 10.5, 10.5); Calibrated: 7/18/2004 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 1; Type: SAM 1; Serial: 1185 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 M-ch/Area Scan (9x17x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.441 mW/g M-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 11.0 V/m; Power Drift = -0.205 dB Peak SAR (extrapolated) = 0.609 W/kg SAR(1 g) = 0.433 mW/g; SAR(10 g) = 0.303 mW/g Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.502 mW/g 0 dB = 0.502mW/g

Date/Time: 3/24/2005 6:22:40 PM Test Laboratory: Compliance Certification Services 4_Body Worn - With Holster (815-047-001 DUT: Intermec Technologies Corporation; Type: 700C; Serial: 18190400042 (with 802.11bg, GSM and Bluetooth) Communication System: GSM850; Frequency: 836.4 MHz;Duty Cycle: 1:4 M-ch/Z Scan (1x1x41): Measurement grid: dx=20mm, dy=20mm, dz=2.5mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.499 mW/g

Date/Time: 3/28/2005 7:09:01 PMDate/Time: 3/28/2005 7:20:16 PM Test Laboratory: Compliance Certification Services 4_Body Worn - With holster (815-047-001) DUT: Intermec Technologies Corporation; Type: 700C; Serial: 18190400042 (with 802.11bg, GSM and Bluetooth) Communication System: 802.11bg; Frequency: 2437 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2437 MHz; σ = 1.99 mho/m; εr = 52.1; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 23.5 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.32, 8.32, 8.32); Calibrated: 7/18/2004 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 1; Type: SAM 1; Serial: 1185 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 M-ch/Area Scan (9x14x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.426 mW/g M-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 3.07 V/m; Power Drift = -0.233 dB Peak SAR (extrapolated) = 0.702 W/kg SAR(1 g) = 0.306 mW/g; SAR(10 g) = 0.130 mW/g Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.466 mW/g 0 dB = 0.466mW/g

Date/Time: 3/28/2005 7:36:55 PMDate/Time: 3/28/2005 7:48:09 PM Test Laboratory: Compliance Certification Services 4_Body Worn - With holster (815-047-001) DUT: Intermec Technologies Corporation; Type: 700C; Serial: 18190400042 (with 802.11bg, GSM and Bluetooth) Communication System: Bluetooth; Frequency: 2441 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2441 MHz; σ = 2 mho/m; εr = 52.1; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 23.5 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.32, 8.32, 8.32); Calibrated: 7/18/2004 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 1; Type: SAM 1; Serial: 1185 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 M-ch/Area Scan (10x12x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.00 mW/g M-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 0.447 V/m; Power Drift = -0.182 dB Peak SAR (extrapolated) = 0.014 W/kg SAR(1 g) = 0.00258 mW/g; SAR(10 g) = 0.001 mW/g Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.01 mW/g 0 dB = 0.010mW/g

Date/Time: 3/29/2005 10:44:36 PMDate/Time: 3/29/2005 10:56:18 PM Test Laboratory: Compliance Certification Services 4_Body Worn - With holster (815-047-001) DUT: Intermec Technologies Corporation; Type: 700C; Serial: 18190400042 (with 802.11bg, GSM and Bluetooth) Communication System: DCS 1900; Frequency: 1880 MHz;Duty Cycle: 1:4 Medium parameters used: f = 1880 MHz; σ = 1.52 mho/m; εr = 53.6; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 23.5 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.1, 8.1, 8.1); Calibrated: 7/18/2004 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 1; Type: SAM 1; Serial: 1185 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 M-ch/Area Scan (9x14x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.370 mW/g M-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 6.29 V/m; Power Drift = -0.167 dB Peak SAR (extrapolated) = 0.451 W/kg SAR(1 g) = 0.312 mW/g; SAR(10 g) = 0.199 mW/g Maximum value of SAR (measured) = 0.380 mW/g 0 dB = 0.380mW/g

Date/Time: 3/24/2005 11:48:10 AMDate/Time: 3/24/2005 12:00:13 PM Test Laboratory: Compliance Certification Services 5_Body Worn - Belt-clip (805-612-001) DUT: Intermec Technologies Corporation; Type: 700C; Serial: 18190400042 (with 802.11bg, GSM and Bluetooth) Communication System: GSM850; Frequency: 836.4 MHz;Duty Cycle: 1:4 Medium parameters used (interpolated): f = 836.4 MHz; σ = 1 mho/m; εr = 57.1; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 23.5 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(10.5, 10.5, 10.5); Calibrated: 7/18/2004 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 1; Type: SAM 1; Serial: 1185 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 M-ch/Area Scan (9x15x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.204 mW/g M-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 12.0 V/m; Power Drift = -0.199 dB Peak SAR (extrapolated) = 0.241 W/kg SAR(1 g) = 0.176 mW/g; SAR(10 g) = 0.126 mW/g Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.207 mW/g 0 dB = 0.207mW/g

Date/Time: 3/28/2005 4:09:23 PMDate/Time: 3/28/2005 4:20:39 PM Test Laboratory: Compliance Certification Services 5_Body Worn - Belt-clip (805-612-001) DUT: Intermec Technologies Corporation; Type: 700C; Serial: 18190400042 (with 802.11bg, GSM and Bluetooth) Communication System: 802.11bg; Frequency: 2437 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2437 MHz; σ = 1.99 mho/m; εr = 52.1; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 23.5 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.32, 8.32, 8.32); Calibrated: 7/18/2004 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 1; Type: SAM 1; Serial: 1185 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 M-ch/Area Scan (9x14x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.059 mW/g M-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 1.52 V/m; Power Drift = -0.262 dB Peak SAR (extrapolated) = 0.100 W/kg SAR(1 g) = 0.053 mW/g; SAR(10 g) = 0.026 mW/g Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.071 mW/g 0 dB = 0.071mW/g

Date/Time: 3/28/2005 4:57:40 PMDate/Time: 3/28/2005 5:09:14 PM Test Laboratory: Compliance Certification Services 5_Body Worn - Belt-clip (805-612-001) DUT: Intermec Technologies Corporation; Type: 700C; Serial: 18190400042 (with 802.11bg, GSM and Bluetooth) Communication System: Bluetooth; Frequency: 2441 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2441 MHz; σ = 2 mho/m; εr = 52.1; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 23.5 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.32, 8.32, 8.32); Calibrated: 7/18/2004 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 1; Type: SAM 1; Serial: 1185 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 M-ch/Area Scan (10x13x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.013 mW/g M-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 1.21 V/m; Power Drift = -0.145 dB Peak SAR (extrapolated) = 0.020 W/kg SAR(1 g) = 0.011 mW/g; SAR(10 g) = 0.0049 mW/g Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.014 mW/g 0 dB = 0.014mW/g

Date/Time: 3/29/2005 11:18:28 PMDate/Time: 3/29/2005 11:30:57 PM Test Laboratory: Compliance Certification Services 5_Body Worn - Belt-clip (805-612-001) DUT: Intermec Technologies Corporation; Type: 700C; Serial: 18190400042 (with 802.11bg, GSM and Bluetooth) Communication System: DCS 1900; Frequency: 1880 MHz;Duty Cycle: 1:4 Medium parameters used: f = 1880 MHz; σ = 1.52 mho/m; εr = 53.6; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 23.5 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.1, 8.1, 8.1); Calibrated: 7/18/2004 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 1; Type: SAM 1; Serial: 1185 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 M-ch/Area Scan (10x14x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.391 mW/g M-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 4.43 V/m; Power Drift = -0.127 dB Peak SAR (extrapolated) = 0.593 W/kg SAR(1 g) = 0.346 mW/g; SAR(10 g) = 0.166 mW/g Maximum value of SAR (measured) = 0.463 mW/g 0 dB = 0.463mW/g

Date/Time: 3/29/2005 11:36:54 PM Test Laboratory: Compliance Certification Services 5_Body Worn - Belt-clip (805-612-001) DUT: Intermec Technologies Corporation; Type: 700C; Serial: 18190400042 (with 802.11bg, GSM and Bluetooth) Communication System: DCS 1900; Frequency: 1880 MHz;Duty Cycle: 1:4 M-ch/Z Scan (1x1x41): Measurement grid: dx=20mm, dy=20mm, dz=2.5mm Maximum value of SAR (measured) = 0.486 mW/g


Document Created: 2005-04-07 16:28:05
Document Modified: 2005-04-07 16:28:05
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC