SAR Report FCC ID EHAEM3420 - 1900 PLOTS

FCC ID: EHABTS080

RF Exposure Info

Download: PDF
FCCID_460759

Date/Time: 07/07/04 09:42:25 Test Laboratory: Compliance Certification Services File Name: 1_L-Touch (Antenna -204).da4 DUT: Intermec Technologies Corporation; Type: EM3420; Serial: N/A Program Name: 1_Left Touch (Antenna -204) Ambient Temp.: 24.0 deg. C; Liquid Temp.: 23.0 deg. C Communication System: PCS CDMA; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.38 mho/m; εr = 40.1; ρ = 1000 kg/m3 Phantom section: Left Section DASY4 Configuration: - Probe: ES3DV2 - SN3021; ConvF(5.1, 5.1, 5.1); Calibrated: 7/29/2003 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 12/23/2003 - Phantom: SAM 1; Type: SAM 1; Serial: 1185 - Measurement SW: DASY4, V4.2 Build 44; Postprocessing SW: SEMCAD, V1.8 Build 112 M-ch/Area Scan (9x14x1): Measurement grid: dx=15mm, dy=15mm Reference Value = 8.43 V/m; Power Drift = 0.0 dB Maximum value of SAR (measured) = 0.264 mW/g M-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 8.43 V/m; Power Drift = 0.0 dB Maximum value of SAR (measured) = 0.274 mW/g Peak SAR (extrapolated) = 0.358 W/kg SAR(1 g) = 0.260 mW/g; SAR(10 g) = 0.169 mW/g M-ch/Zoom Scan (5x5x7)/Cube 1: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 8.43 V/m; Power Drift = 0.0 dB Maximum value of SAR (measured) = 0.212 mW/g Peak SAR (extrapolated) = 0.293 W/kg SAR(1 g) = 0.199 mW/g; SAR(10 g) = 0.134 mW/g

Date/Time: 07/07/04 11:20:12 Test Laboratory: Compliance Certification Services File Name: 1-2_L-Touch (Antenna -102).da4 DUT: Intermec Technologies Corporation; Type: EM3420; Serial: N/A Program Name: 1-2_Left Touch (Antenna -102) Ambient Temp.: 24.0 deg. C; Liquid Temp.: 23.0 deg. C Communication System: PCS CDMA; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.38 mho/m; εr = 40.1; ρ = 1000 kg/m3 Phantom section: Left Section DASY4 Configuration: - Probe: ES3DV2 - SN3021; ConvF(5.1, 5.1, 5.1); Calibrated: 7/29/2003 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 12/23/2003 - Phantom: SAM 1; Type: SAM 1; Serial: 1185 - Measurement SW: DASY4, V4.2 Build 44; Postprocessing SW: SEMCAD, V1.8 Build 112 M-ch/Area Scan (9x14x1): Measurement grid: dx=15mm, dy=15mm M-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 8.22 V/m; Power Drift = -0.0 dB Maximum value of SAR (measured) = 0.215 mW/g Peak SAR (extrapolated) = 0.289 W/kg SAR(1 g) = 0.201 mW/g; SAR(10 g) = 0.130 mW/g M-ch/Zoom Scan (5x5x7)/Cube 1: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 8.22 V/m; Power Drift = -0.0 dB Maximum value of SAR (measured) = 0.177 mW/g Peak SAR (extrapolated) = 0.243 W/kg SAR(1 g) = 0.170 mW/g; SAR(10 g) = 0.114 mW/g

Date/Time: 07/07/04 13:38:00 Test Laboratory: Compliance Certification Services File Name: 1-3_L-Tilt (Antenna -204).da4 DUT: Intermec Technologies Corporation; Type: EM3420; Serial: N/A Program Name: 1-3_Left Tilt (Antenna -204) Ambient Temp.: 24.0 deg. C; Liquid Temp.: 23.0 deg. C Communication System: PCS CDMA; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.38 mho/m; εr = 40.1; ρ = 1000 kg/m3 Phantom section: Left Section DASY4 Configuration: - Probe: ES3DV2 - SN3021; ConvF(5.1, 5.1, 5.1); Calibrated: 7/29/2003 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 12/23/2003 - Phantom: SAM 1; Type: SAM 1; Serial: 1185 - Measurement SW: DASY4, V4.2 Build 44; Postprocessing SW: SEMCAD, V1.8 Build 112 M-ch/Area Scan (9x13x1): Measurement grid: dx=15mm, dy=15mm Reference Value = 8.12 V/m; Power Drift = 0.1 dB Maximum value of SAR (measured) = 0.499 mW/g M-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 8.12 V/m; Power Drift = 0.1 dB Maximum value of SAR (measured) = 0.505 mW/g Peak SAR (extrapolated) = 0.696 W/kg SAR(1 g) = 0.481 mW/g; SAR(10 g) = 0.301 mW/g

Date/Time: 07/07/04 12:42:26 Test Laboratory: Compliance Certification Services File Name: 1-4_L-Tilt (Antenna -102).da4 DUT: Intermec Technologies Corporation; Type: EM3420; Serial: N/A Program Name: 1-4_Left Tilt (Antenna -102) Ambient Temp.: 24.0 deg. C; Liquid Temp.: 23.0 deg. C Communication System: PCS CDMA; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.38 mho/m; εr = 40.1; ρ = 1000 kg/m3 Phantom section: Left Section DASY4 Configuration: - Probe: ES3DV2 - SN3021; ConvF(5.1, 5.1, 5.1); Calibrated: 7/29/2003 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 12/23/2003 - Phantom: SAM 1; Type: SAM 1; Serial: 1185 - Measurement SW: DASY4, V4.2 Build 44; Postprocessing SW: SEMCAD, V1.8 Build 112 M-ch/Area Scan (9x14x1): Measurement grid: dx=15mm, dy=15mm Reference Value = 7.21 V/m; Power Drift = -0.13 dB Maximum value of SAR (measured) = 0.349 mW/g M-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 7.21 V/m; Power Drift = -0.13 dB Maximum value of SAR (measured) = 0.377 mW/g Peak SAR (extrapolated) = 0.498 W/kg SAR(1 g) = 0.352 mW/g; SAR(10 g) = 0.224 mW/g

Date/Time: 07/07/04 14:07:53 Test Laboratory: Compliance Certification Services File Name: 2-1_R-Touch (Antenna -204).da4 DUT: Intermec Technologies Corporation; Type: EM3420; Serial: N/A Program Name: 2-1_Right Touch (Antenna -204) Ambient Temp.: 24.0 deg. C; Liquid Temp.: 23.0 deg. C Communication System: PCS CDMA; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.38 mho/m; εr = 40.1; ρ = 1000 kg/m3 Phantom section: Right Section DASY4 Configuration: - Probe: ES3DV2 - SN3021; ConvF(5.1, 5.1, 5.1); Calibrated: 7/29/2003 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 12/23/2003 - Phantom: SAM 1; Type: SAM 1; Serial: 1185 - Measurement SW: DASY4, V4.2 Build 44; Postprocessing SW: SEMCAD, V1.8 Build 112 M-ch/Area Scan (9x13x1): Measurement grid: dx=15mm, dy=15mm Reference Value = 9.7 V/m; Power Drift = -0.1 dB Maximum value of SAR (measured) = 0.334 mW/g M-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 9.7 V/m; Power Drift = -0.1 dB Maximum value of SAR (measured) = 0.358 mW/g Peak SAR (extrapolated) = 0.497 W/kg SAR(1 g) = 0.333 mW/g; SAR(10 g) = 0.205 mW/g M-ch/Zoom Scan (5x5x7)/Cube 1: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 9.7 V/m; Power Drift = -0.1 dB Maximum value of SAR (measured) = 0.358 mW/g Peak SAR (extrapolated) = 0.482 W/kg SAR(1 g) = 0.328 mW/g; SAR(10 g) = 0.206 mW/g

Date/Time: 07/07/04 14:49:27 Test Laboratory: Compliance Certification Services File Name: 2-2_R-Touch (Antenna -102).da4 DUT: Intermec Technologies Corporation; Type: EM3420; Serial: N/A Program Name: 2-2_Right Touch (Antenna -102) Ambient Temp.: 24.0 deg. C; Liquid Temp.: 23.0 deg. C Communication System: PCS CDMA; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.38 mho/m; εr = 40.1; ρ = 1000 kg/m3 Phantom section: Right Section DASY4 Configuration: - Probe: ES3DV2 - SN3021; ConvF(5.1, 5.1, 5.1); Calibrated: 7/29/2003 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 12/23/2003 - Phantom: SAM 1; Type: SAM 1; Serial: 1185 - Measurement SW: DASY4, V4.2 Build 44; Postprocessing SW: SEMCAD, V1.8 Build 112 M-ch/Area Scan (9x14x1): Measurement grid: dx=15mm, dy=15mm Reference Value = 8.12 V/m; Power Drift = 0.1 dB Maximum value of SAR (measured) = 0.272 mW/g M-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 8.12 V/m; Power Drift = 0.1 dB Maximum value of SAR (measured) = 0.290 mW/g Peak SAR (extrapolated) = 0.384 W/kg SAR(1 g) = 0.265 mW/g; SAR(10 g) = 0.166 mW/g M-ch/Zoom Scan (5x5x7)/Cube 1: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 8.12 V/m; Power Drift = 0.1 dB Maximum value of SAR (measured) = 0.263 mW/g Peak SAR (extrapolated) = 0.359 W/kg SAR(1 g) = 0.243 mW/g; SAR(10 g) = 0.153 mW/g

Date/Time: 07/07/04 16:04:39 Test Laboratory: Compliance Certification Services File Name: 2-3_R-Tilt (Antenna -204).da4 DUT: Intermec Technologies Corporation; Type: EM3420; Serial: N/A Program Name: 2-3_Right Tilt (Antenna -204) Ambient Temp.: 24.0 deg. C; Liquid Temp.: 23.0 deg. C Communication System: PCS CDMA; Frequency: 1851.25 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 1851.25 MHz; σ = 1.36 mho/m; εr = 40.2; ρ = 1000 kg/m3 Phantom section: Right Section DASY4 Configuration: - Probe: ES3DV2 - SN3021; ConvF(5.1, 5.1, 5.1); Calibrated: 7/29/2003 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 12/23/2003 - Phantom: SAM 1; Type: SAM 1; Serial: 1185 - Measurement SW: DASY4, V4.2 Build 44; Postprocessing SW: SEMCAD, V1.8 Build 112 L-ch/Area Scan (9x12x1): Measurement grid: dx=15mm, dy=15mm Reference Value = 8.6 V/m; Power Drift = 0.0 dB Maximum value of SAR (measured) = 0.833 mW/g Info: Interpolated medium parameters used for SAR evaluation! L-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 8.6 V/m; Power Drift = 0.0 dB Maximum value of SAR (measured) = 1 mW/g Peak SAR (extrapolated) = 1.45 W/kg SAR(1 g) = 0.931 mW/g; SAR(10 g) = 0.538 mW/g Info: Interpolated medium parameters used for SAR evaluation!

Date/Time: 07/07/04 16:04:39 Test Laboratory: Compliance Certification Services File Name: 2-3_R-Tilt (Antenna -204).da4 DUT: Intermec Technologies Corporation; Type: EM3420; Serial: N/A Program Name: 2-3_Right Tilt (Antenna -204) Ambient Temp.: 24.0 deg. C; Liquid Temp.: 23.0 deg. C Communication System: PCS CDMA; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.38 mho/m; εr = 40.1; ρ = 1000 kg/m3 Phantom section: Right Section DASY4 Configuration: - Probe: ES3DV2 - SN3021; ConvF(5.1, 5.1, 5.1); Calibrated: 7/29/2003 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 12/23/2003 - Phantom: SAM 1; Type: SAM 1; Serial: 1185 - Measurement SW: DASY4, V4.2 Build 44; Postprocessing SW: SEMCAD, V1.8 Build 112 M-ch/Area Scan (9x13x1): Measurement grid: dx=15mm, dy=15mm Reference Value = 8.74 V/m; Power Drift = 0.1 dB Maximum value of SAR (measured) = 0.950 mW/g M-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 8.74 V/m; Power Drift = 0.1 dB Maximum value of SAR (measured) = 1.08 mW/g Peak SAR (extrapolated) = 1.57 W/kg SAR(1 g) = 1 mW/g; SAR(10 g) = 0.581 mW/g

Date/Time: 07/07/04 16:04:39 Test Laboratory: Compliance Certification Services File Name: 2-3_R-Tilt (Antenna -204).da4 DUT: Intermec Technologies Corporation; Type: EM3420; Serial: N/A Program Name: 2-3_Right Touch (Antenna -204) Ambient Temp.: 24.0 deg. C; Liquid Temp.: 23.0 deg. C Communication System: PCS CDMA; Frequency: 1908.75 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 1908.75 MHz; σ = 1.41 mho/m; εr = 40; ρ = 1000 kg/m3 Phantom section: Right Section DASY4 Configuration: - Probe: ES3DV2 - SN3021; ConvF(5.1, 5.1, 5.1); Calibrated: 7/29/2003 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 12/23/2003 - Phantom: SAM 1; Type: SAM 1; Serial: 1185 - Measurement SW: DASY4, V4.2 Build 44; Postprocessing SW: SEMCAD, V1.8 Build 112 H-ch/Area Scan (9x12x1): Measurement grid: dx=15mm, dy=15mm Reference Value = 8.92 V/m; Power Drift = 0.1 dB Maximum value of SAR (measured) = 1.04 mW/g Info: Interpolated medium parameters used for SAR evaluation! H-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 8.92 V/m; Power Drift = 0.1 dB Maximum value of SAR (measured) = 1.23 mW/g Peak SAR (extrapolated) = 1.74 W/kg SAR(1 g) = 1.14 mW/g; SAR(10 g) = 0.656 mW/g Info: Interpolated medium parameters used for SAR evaluation!

Date/Time: 07/07/04 16:04:39 Test Laboratory: Compliance Certification Services File Name: 2-3_R-Tilt (Antenna -204).da4 DUT: Intermec Technologies Corporation; Type: EM3420; Serial: N/A Program Name: 2-3_Right Tilt (Antenna -204) Ambient Temp.: 24.0 deg. C; Liquid Temp.: 23.0 deg. C Communication System: PCS CDMA; Frequency: 1908.75 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 1908.75 MHz; σ = 1.41 mho/m; εr = 40; ρ = 1000 kg/m3 Phantom section: Right Section DASY4 Configuration: - Probe: ES3DV2 - SN3021; ConvF(5.1, 5.1, 5.1); Calibrated: 7/29/2003 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 12/23/2003 - Phantom: SAM 1; Type: SAM 1; Serial: 1185 - Measurement SW: DASY4, V4.2 Build 44; Postprocessing SW: SEMCAD, V1.8 Build 112 Co-location H-ch/Area Scan (9x12x1): Measurement grid: dx=15mm, dy=15mm Reference Value = 8.97 V/m; Power Drift = 0.0 dB Maximum value of SAR (measured) = 1.06 mW/g Info: Interpolated medium parameters used for SAR evaluation! Co-location H-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 8.97 V/m; Power Drift = 0.0 dB Maximum value of SAR (measured) = 1.27 mW/g Peak SAR (extrapolated) = 1.83 W/kg SAR(1 g) = 1.17 mW/g; SAR(10 g) = 0.674 mW/g Info: Interpolated medium parameters used for SAR evaluation!

Date/Time: 07/07/04 16:04:39 Test Laboratory: Compliance Certification Services File Name: 2-3_R-Tilt (Antenna -204).da4 DUT: Intermec Technologies Corporation; Type: EM3420; Serial: N/A Program Name: 2-3_Right Tilt (Antenna -204) Communication System: PCS CDMA; Frequency: 1908.75 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 1908.75 MHz; σ = 1.41 mho/m; εr = 40; ρ = 1000 kg/m3 Phantom section: Right Section Co-location H-ch/Z Scan (1x1x51): Measurement grid: dx=20mm, dy=20mm, dz=2mm Reference Value = 8.97 V/m; Power Drift = 0.0 dB Maximum value of SAR (measured) = 1.08 mW/g Info: Interpolated medium parameters used for SAR evaluation!

Date/Time: 07/07/04 15:26:05 Test Laboratory: Compliance Certification Services File Name: 2-4_R-Tilt (Antenna -102).da4 DUT: Intermec Technologies Corporation; Type: EM3420; Serial: N/A Program Name: 2-4_Right Tilt (Antenna -102) Ambient Temp.: 24.0 deg. C; Liquid Temp.: 23.0 deg. C Communication System: PCS CDMA; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.38 mho/m; εr = 40.1; ρ = 1000 kg/m3 Phantom section: Right Section DASY4 Configuration: - Probe: ES3DV2 - SN3021; ConvF(5.1, 5.1, 5.1); Calibrated: 7/29/2003 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 12/23/2003 - Phantom: SAM 1; Type: SAM 1; Serial: 1185 - Measurement SW: DASY4, V4.2 Build 44; Postprocessing SW: SEMCAD, V1.8 Build 112 M-ch/Area Scan (9x14x1): Measurement grid: dx=15mm, dy=15mm Reference Value = 7.42 V/m; Power Drift = -0.13 dB Maximum value of SAR (measured) = 0.648 mW/g M-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 7.42 V/m; Power Drift = -0.13 dB Maximum value of SAR (measured) = 0.738 mW/g Peak SAR (extrapolated) = 1.03 W/kg SAR(1 g) = 0.677 mW/g; SAR(10 g) = 0.409 mW/g

Date/Time: 07/07/04 18:02:35 Test Laboratory: Compliance Certification Services File Name: 3-1_Face-held (Antenna -204).da4 DUT: Intermec Technologies Corporation; Type: EM3420; Serial: N/A Program Name: 3-1_Face-held (Antenna -204) Ambient Temp.: 24.0 deg. C; Liquid Temp.: 23.0 deg. C Communication System: PCS CDMA; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.38 mho/m; εr = 40.1; ρ = 1000 kg/m3 Phantom section: Flat Section DASY4 Configuration: - Probe: ES3DV2 - SN3021; ConvF(5.1, 5.1, 5.1); Calibrated: 7/29/2003 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 12/23/2003 - Phantom: SAM 1; Type: SAM 1; Serial: 1185 - Measurement SW: DASY4, V4.2 Build 44; Postprocessing SW: SEMCAD, V1.8 Build 112 M-ch/Area Scan (9x13x1): Measurement grid: dx=15mm, dy=15mm Reference Value = 5.86 V/m; Power Drift = 0.1 dB Maximum value of SAR (measured) = 0.203 mW/g M-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 5.86 V/m; Power Drift = 0.1 dB Maximum value of SAR (measured) = 0.218 mW/g Peak SAR (extrapolated) = 0.312 W/kg SAR(1 g) = 0.202 mW/g; SAR(10 g) = 0.126 mW/g

Date/Time: 07/07/04 18:02:35 Test Laboratory: Compliance Certification Services File Name: 3-1_Face-held (Antenna -204).da4 DUT: Intermec Technologies Corporation; Type: EM3420; Serial: N/A Program Name: 3-1_Face-held (Antenna -204) Communication System: PCS CDMA; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.38 mho/m; εr = 40.1; ρ = 1000 kg/m3 Phantom section: Flat Section M-ch/Z Scan (1x1x51): Measurement grid: dx=20mm, dy=20mm, dz=2mm Reference Value = 5.86 V/m; Power Drift = 0.0 dB Maximum value of SAR (measured) = 0.225 mW/g

Date/Time: 07/07/04 18:35:43 Test Laboratory: Compliance Certification Services File Name: 3-2_Face-held (Antenna -102).da4 DUT: Intermec Technologies Corporation; Type: EM3420; Serial: N/A Program Name: 3-2_Face-held (Antenna -102) Ambient Temp.: 24.0 deg. C; Liquid Temp.: 23.0 deg. C Communication System: PCS CDMA; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.38 mho/m; εr = 40.1; ρ = 1000 kg/m3 Phantom section: Flat Section DASY4 Configuration: - Probe: ES3DV2 - SN3021; ConvF(5.1, 5.1, 5.1); Calibrated: 7/29/2003 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 12/23/2003 - Phantom: SAM 1; Type: SAM 1; Serial: 1185 - Measurement SW: DASY4, V4.2 Build 44; Postprocessing SW: SEMCAD, V1.8 Build 112 M-ch/Area Scan (9x13x1): Measurement grid: dx=15mm, dy=15mm Reference Value = 5.6 V/m; Power Drift = 0.0 dB Maximum value of SAR (measured) = 0.200 mW/g M-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 5.6 V/m; Power Drift = 0.0 dB Maximum value of SAR (measured) = 0.203 mW/g Peak SAR (extrapolated) = 0.286 W/kg SAR(1 g) = 0.188 mW/g; SAR(10 g) = 0.119 mW/g

Date/Time: 07/07/04 19:09:36 Test Laboratory: Compliance Certification Services File Name: 4-1_Body worn - Belt clip (Antenna -204).da4 DUT: Intermec Technologies Corporation; Type: 700C; Serial: 05400400870 Program Name: 4-1_Body worn - Belt clip (Antenna -204) Ambient Temp.: 24. 0 deg. C; Liquid Temp.: 23.0 deg. C Communication System: PCS CDMA; Frequency: 1851.25 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 1851.25 MHz; σ = 1.47 mho/m; εr = 54.1; ρ = 1000 kg/m3 Phantom section: Flat Section DASY4 Configuration: - Probe: ES3DV2 - SN3021; ConvF(4.8, 4.8, 4.8); Calibrated: 7/29/2003 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 12/23/2003 - Phantom: SAM 2; Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.2 Build 44; Postprocessing SW: SEMCAD, V1.8 Build 112 L-ch/Area Scan (9x13x1): Measurement grid: dx=15mm, dy=15mm Reference Value = 3.96 V/m; Power Drift = -0.1 dB Maximum value of SAR (measured) = 0.425 mW/g Info: Interpolated medium parameters used for SAR evaluation! L-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 3.96 V/m; Power Drift = -0.1 dB Maximum value of SAR (measured) = 0.628 mW/g Peak SAR (extrapolated) = 0.898 W/kg SAR(1 g) = 0.542 mW/g; SAR(10 g) = 0.270 mW/g Info: Interpolated medium parameters used for SAR evaluation!

Date/Time: 07/07/04 19:09:36 Test Laboratory: Compliance Certification Services File Name: 4-1_Body worn - Belt clip (Antenna -204).da4 DUT: Intermec Technologies Corporation; Type: EM3420; Serial: N/A Program Name: 4-1_Body worn - Belt clip (Antenna -204) Ambient Temp.: 24.0 deg. C; Liquid Temp.: 23.0 deg. C Communication System: PCS CDMA; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.49 mho/m; εr = 54.1; ρ = 1000 kg/m3 Phantom section: Flat Section DASY4 Configuration: - Probe: ES3DV2 - SN3021; ConvF(4.8, 4.8, 4.8); Calibrated: 7/29/2003 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 12/23/2003 - Phantom: SAM 2; Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.2 Build 44; Postprocessing SW: SEMCAD, V1.8 Build 112 M-ch/Area Scan (9x13x1): Measurement grid: dx=15mm, dy=15mm Reference Value = 4.06 V/m; Power Drift = 0.2 dB Maximum value of SAR (measured) = 0.463 mW/g M-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 4.06 V/m; Power Drift = 0.2 dB Maximum value of SAR (measured) = 0.565 mW/g Peak SAR (extrapolated) = 0.777 W/kg SAR(1 g) = 0.489 mW/g; SAR(10 g) = 0.248 mW/g

Date/Time: 07/07/04 19:09:36 Test Laboratory: Compliance Certification Services File Name: 4-1_Body worn - Belt clip (Antenna -204).da4 DUT: Intermec Technologies Corporation; Type: EM3420; Serial: N/A Program Name: 4-1_Body worn - Belt clip (Antenna -204) Ambient Temp.: 24.0 deg. C; Liquid Temp.: 23.0 deg. C Communication System: PCS CDMA; Frequency: 1908.75 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 1908.75 MHz; σ = 1.52 mho/m; εr = 53.9; ρ = 1000 kg/m3 Phantom section: Flat Section DASY4 Configuration: - Probe: ES3DV2 - SN3021; ConvF(4.8, 4.8, 4.8); Calibrated: 7/29/2003 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 12/23/2003 - Phantom: SAM 2; Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.2 Build 44; Postprocessing SW: SEMCAD, V1.8 Build 112 H-ch/Area Scan (9x13x1): Measurement grid: dx=15mm, dy=15mm Reference Value = 4.02 V/m; Power Drift = 0.13 dB Maximum value of SAR (measured) = 0.422 mW/g Info: Interpolated medium parameters used for SAR evaluation! H-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 4.02 V/m; Power Drift = 0.13 dB Maximum value of SAR (measured) = 0.595 mW/g Peak SAR (extrapolated) = 0.862 W/kg SAR(1 g) = 0.523 mW/g; SAR(10 g) = 0.258 mW/g Info: Interpolated medium parameters used for SAR evaluation!

Date/Time: 07/07/04 19:09:36 Test Laboratory: Compliance Certification Services File Name: 4-1_Body worn - Belt clip (Antenna -204).da4 DUT: Intermec Technologies Corporation; Type: EM3420; Serial: N/A Program Name: 4-1_Body worn - Belt clip (Antenna -204) Ambient Temp.: 24.0 deg. C; Liquid Temp.: 23.0 deg. C Communication System: PCS CDMA; Frequency: 1851.25 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 1851.25 MHz; σ = 1.47 mho/m; εr = 54.1; ρ = 1000 kg/m3 Phantom section: Flat Section DASY4 Configuration: - Probe: ES3DV2 - SN3021; ConvF(4.8, 4.8, 4.8); Calibrated: 7/29/2003 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 12/23/2003 - Phantom: SAM 2; Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.2 Build 44; Postprocessing SW: SEMCAD, V1.8 Build 112 C-location L-ch/Area Scan (9x13x1): Measurement grid: dx=15mm, dy=15mm Reference Value = 3.97 V/m; Power Drift = -0.2 dB Maximum value of SAR (measured) = 0.478 mW/g Info: Interpolated medium parameters used for SAR evaluation! C-location L-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 3.97 V/m; Power Drift = -0.2 dB Maximum value of SAR (measured) = 0.619 mW/g Peak SAR (extrapolated) = 0.890 W/kg SAR(1 g) = 0.539 mW/g; SAR(10 g) = 0.266 mW/g Info: Interpolated medium parameters used for SAR evaluation!

Date/Time: 07/07/04 19:09:36 Test Laboratory: Compliance Certification Services File Name: 4-1_Body worn - Belt clip (Antenna -204).da4 DUT: Intermec Technologies Corporation; Type: EM3420; Serial: N/A Program Name: 4-1_Body worn - Belt clip (Antenna -204) Communication System: PCS CDMA; Frequency: 1851.25 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 1851.25 MHz; σ = 1.47 mho/m; εr = 54.1; ρ = 1000 kg/m3 Phantom section: Flat Section C-location L-ch/Z Scan (1x1x51): Measurement grid: dx=20mm, dy=20mm, dz=2mm Reference Value = 3.97 V/m; Power Drift = -0.2 dB Maximum value of SAR (measured) = 0.632 mW/g Info: Interpolated medium parameters used for SAR evaluation!

Date/Time: 07/07/04 20:30:03 Test Laboratory: Compliance Certification Services File Name: 4-2_Body worn - Belt clip (Antenna -102).da4 DUT: Intermec Technologies Corporation; Type: EM3420; Serial: N/A Program Name: 4-2_Body worn - Belt clip (Antenna -102) Ambient Temp.: 24.0 deg. C; Liquid Temp.: 23.0 deg. C Communication System: PCS CDMA; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.49 mho/m; εr = 54.1; ρ = 1000 kg/m3 Phantom section: Flat Section DASY4 Configuration: - Probe: ES3DV2 - SN3021; ConvF(4.8, 4.8, 4.8); Calibrated: 7/29/2003 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 12/23/2003 - Phantom: SAM 2; Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.2 Build 44; Postprocessing SW: SEMCAD, V1.8 Build 112 M-ch/Area Scan (9x13x1): Measurement grid: dx=15mm, dy=15mm Reference Value = 3.79 V/m; Power Drift = -0.1 dB Maximum value of SAR (measured) = 0.294 mW/g M-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 3.79 V/m; Power Drift = -0.1 dB Maximum value of SAR (measured) = 0.438 mW/g Peak SAR (extrapolated) = 0.628 W/kg SAR(1 g) = 0.391 mW/g; SAR(10 g) = 0.199 mW/g

Date/Time: 07/07/04 23:08:06 Test Laboratory: Compliance Certification Services File Name: 5-1_Holster (Antenna -204).da4 DUT: Intermec Technologies Corporation; Type: EM3420; Serial: N/A Program Name: 5-1_Body worn - Holster (Antenna -204) Ambient Temp.: 24.0 deg. C; Liquid Temp.: 23.0 deg. C Communication System: PCS CDMA; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.49 mho/m; εr = 54.1; ρ = 1000 kg/m3 Phantom section: Flat Section DASY4 Configuration: - Probe: ES3DV2 - SN3021; ConvF(4.8, 4.8, 4.8); Calibrated: 7/29/2003 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 12/23/2003 - Phantom: SAM 2; Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.2 Build 44; Postprocessing SW: SEMCAD, V1.8 Build 112 M-ch/Area Scan (9x13x1): Measurement grid: dx=15mm, dy=15mm Reference Value = 6.9 V/m; Power Drift = 0.0 dB Maximum value of SAR (measured) = 0.410 mW/g M-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 6.9 V/m; Power Drift = 0.0 dB Maximum value of SAR (measured) = 0.451 mW/g Peak SAR (extrapolated) = 0.632 W/kg SAR(1 g) = 0.413 mW/g; SAR(10 g) = 0.254 mW/g

Date/Time: 07/07/04 23:34:41 Test Laboratory: Compliance Certification Services File Name: 5-2_Holster (Antenna -102).da4 DUT: Intermec Technologies Corporation; Type: EM3420; Serial: N/A Program Name: 5-2_Body worn - Holster (Antenna -104) Ambient Temp.: 24.0 deg. C; Liquid Temp.: 23.0 deg. C Communication System: PCS CDMA; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.49 mho/m; εr = 54.1; ρ = 1000 kg/m3 Phantom section: Flat Section DASY4 Configuration: - Probe: ES3DV2 - SN3021; ConvF(4.8, 4.8, 4.8); Calibrated: 7/29/2003 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 12/23/2003 - Phantom: SAM 2; Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.2 Build 44; Postprocessing SW: SEMCAD, V1.8 Build 112 M-ch/Area Scan (9x13x1): Measurement grid: dx=15mm, dy=15mm Reference Value = 6.57 V/m; Power Drift = 0.1 dB Maximum value of SAR (measured) = 0.413 mW/g M-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 6.57 V/m; Power Drift = 0.1 dB Maximum value of SAR (measured) = 0.428 mW/g Peak SAR (extrapolated) = 0.589 W/kg SAR(1 g) = 0.398 mW/g; SAR(10 g) = 0.253 mW/g


Document Created: 2004-07-16 16:07:05
Document Modified: 2004-07-16 16:07:05
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC