700C RF exposure

FCC ID: EHA700C-SMC45

RF Exposure Info

Download: PDF
FCCID_300950

Intermec Technologies Corporation 550 Second Street S.E. Cedar Rapids, IA 52401 319.369.3865 tel 319.369.3299 fax www.intermec.com November 20, 2002 To Whom It May Concern: Intermec Technologies, Corp. hereby declares that our Model 700C Pen Computer for Data Collection with 2.4 GHz DSSS transceiver is categorically excluded from routine environmental evaluation for RF exposure by its classification as a 15.247 handheld mobile radio operating with approximately 100 mW EIRP. Below is a table showing MPE evaluation of the product with both antenna options. S = (PG)/4πR2 Where: S = power density (mW/cm2) P = power input to the antenna (mW) G = linear power gain relative to an isotropic radiator R = distance to the center of the radiation of the antenna (20 cm = limit for MPE estimates) Solving for S, the maximum power densities 20 cm from the transmitting antennas are as follows: Max Peak Maximum Conducted Power Permitted Antenna Transmit Output Antenna Density @ Power Manufacturer Antenna Type Antenna Part No. Frequency Power Gain 20 cm Density (MHz) (mW) (dBi) (mW/cm2) (mW/cm2) Mobilemark tuned dipole 805-606-001 2400 89 1.3 0.024 1 SeaRay folded monopole 805-608-002 2400 89 -2 0.011 1

Intermec Technologies Corporation 550 Second Street S.E. Cedar Rapids, IA 52401 Intermec Technologies, Corp. hereby declares that our Model 700C Pen Computer for Data Collection with 2.4 GHz FHSS transceiver is categorically excluded from routine environmental evaluation for RF exposure by its classification as a 15.247 handheld mobile radio operating with approximately 1 mW EIRP. Below is a table showing MPE evaluation of the product with the integral antenna. S = (PG)/4πR2 Where: S = power density (mW/cm2) P = power input to the antenna (mW) G = linear power gain relative to an isotropic radiator R = distance to the center of the radiation of the antenna (20 cm = limit for MPE estimates) Solving for S, the maximum power densities 20 cm from the transmitting antennas are as follows: Max Peak Maximum Conducted Power Permitted Antenna Antenna Transmit Output Antenna Density @ Power Type Part No. Frequency Power Gain 20 cm Density (MHz) (mW) (dBi) (mW/cm2) (mW/cm2) Integral ABTM3 2400 3.78 -5.77 .00020 1

Intermec Technologies Corporation 550 Second Street S.E. Cedar Rapids, IA 52401 Intermec Technologies, Corp. hereby declares that our Model 700C Pen Computer for Data Collection with 1900 MHz GSM/GPRS transceiver is categorically excluded from routine environmental evaluation for RF exposure by its classification as a Part 24 handheld mobile radio operating with approximately 470 mW EIRP. Below is a table showing MPE evaluation of the product. S = (PG)/4πR2 Where: S = power density (mW/cm2) P = power input to the antenna (mW) G = linear power gain relative to an isotropic radiator R = distance to the center of the radiation of the antenna (20 cm = limit for MPE estimates) Solving for S, the maximum power densities 20 cm from the transmitting antennas are as follows: Max Peak Maximum Conducted Power Permitted Antenna Antenna Transmit Output Antenna Density @ Power Manufacturer Antenna Type Part No. Frequency Power Gain 20 cm Density (MHz) (mW) (dBi) (mW/cm2) (mW/cm2) Mobilemark ¼ wave monopole 805-606-003 1900 933 -3 0.093 1

Intermec Technologies Corporation 550 Second Street S.E. Cedar Rapids, IA 52401 Intermec Technologies, Corp. hereby declares that our Model 700C Pen Computer for Data Collection with 2.4 GHz DSSS, 2.4 GHz FHSS, and 1900 MHz GSM/GPRS transceivers is categorically excluded from routine environmental evaluation for RF exposure by its classification as a Part 15/24 handheld mobile radio operating with a total output power of approximately 570 mW EIRP. Below is a table showing MPE evaluation of the product with all antenna options. S = (PG)/4πR2 Where: S = power density (mW/cm2) P = power input to the antenna (mW) G = linear power gain relative to an isotropic radiator R = distance to the center of the radiation of the antenna (20 cm = limit for MPE estimates) Solving for S, the maximum power densities 20 cm from the transmitting antennas are as follows: Max Peak Maximum Conducted Power Permitted Antenna Antenna Transmit Output Antenna Density @ Power Manufacturer Antenna Type Part No. Frequency Power Gain 20 cm Density (MHz) (mW) (dBi) (mW/cm2) (mW/cm2) Mobilemark ¼ wave monopole 805-606-003 1900 933 -3 0.093 1 Mobilemark tuned dipole 805-606-001 2400 89 1.3 0.024 1 SeaRay folded monopole 805-608-002 2400 89 -2 0.011 1 Integral Integral Ceramic ABTM3 2400 3.78 -5.77 .00020 1 The worst case total for these radio options is .117 mW/cm2 on a 1 mW/cm2 limit. If you have any questions regarding this product, please feel free to contact me (phone: 319 369 3865, fax: 319 369 3299, email: scott.holub@intermec.com). Sincerely, Scott Holub Regulatory Compliance Engineer III Intermec Technologies Corp.


Document Created: 2003-02-05 07:09:46
Document Modified: 2003-02-05 07:09:46
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC