MPE report

FCC ID: EHA-IM11

RF Exposure Info

Download: PDF
FCCID_2612688

Intermec Technologies Corporation IP30C FCC 2.1091:2015 Report # INMC0898.1 NVLAP Lab Code: 200630-0 This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government of the United States of America. This Report may only be duplicated in its entirety

CERTIFICATE OF TEST 2014-12-10 Last Date of Test: March 18, 2015 Intermec Technologies Corporation Model: IP30C Radio Equipment Testing Standards Specification Method FCC 2.1091:2015 FCC KDB 447498 D01 v05r02 Results Method Test Description Applied Results Comments Clause 7.2 Maximum Permissible Exposure Yes Pass Deviations From Test Standards None Approved By: Don Facteau, IT Manager Product compliance is the responsibility of the client; therefore, the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. The results of this test pertain only to the sample(s) tested. The specific description is noted in each of the individual sections of the test report supporting this certificate of test. Report No. INMC0898.1 2/17

REVISION HISTORY REV 2014.10.14 Revision Description Date Page Number Number 00 None Report No. INMC0898.1 3/17

ACCREDITATIONS AND AUTHORIZATIONS REV 2015.2.19 United States FCC - Designated by the FCC as a Telecommunications Certification Body (TCB). Certification chambers, Open Area Test Sites, and conducted measurement facilities are listed with the FCC. A2LA - Accredited by A2LA to ISO / IEC 17065 as a product certifier. This allows Northwest EMC to certify transmitters to FCC and IC specifications. NVLAP - Each laboratory is accredited by NVLAP to ISO 17025 Canada IC - Recognized by Industry Canada as a Certification Body (CB). Certification chambers and Open Area Test Sites are filed with IC. European Union European Commission – Validated by the European Commission as a Conformity Assessment Body (CAB) under the EMC directive and as a Notified Body under the R&TTE Directive. Australia/New Zealand ACMA - Recognized by ACMA as a CAB for the acceptance of test data. Korea MSIP / RRA - Recognized by KCC’s RRA as a CAB for the acceptance of test data. Japan VCCI - Associate Member of the VCCI. Conducted and radiated measurement facilities are registered. Taiwan BSMI – Recognized by BSMI as a CAB for the acceptance of test data. NCC - Recognized by NCC as a CAB for the acceptance of test data. Singapore IDA – Recognized by IDA as a CAB for the acceptance of test data. Israel MOC – Recognized by MOC as a CAB for the acceptance of test data. Hong Kong OFCA – Recognized by OFCA as a CAB for the acceptance of test data. Vietnam MIC – Recognized by MIC as a CAB for the acceptance of test data. SCOPE For details on the Scopes of our Accreditations, please visit: http://www.nwemc.com/accreditations/ http://gsi.nist.gov/global/docs/cabs/designations.html Report No. INMC0898.1 4/17

FACILITIES REV 2015.2.19 California Minnesota New York Oregon Texas Washington Labs OC01-13 Labs MN01-08, MN10 Labs NY01-04 Labs EV01-12 Labs TX01-09 Labs NC01-05 41 Tesla 9349 W Broadway Ave. 4939 Jordan Rd. 22975 NW Evergreen Pkwy 3801 E Plano Pkwy 19201 120th Ave NE Irvine, CA 92618 Brooklyn Park, MN 55445 Elbridge, NY 13060 Hillsboro, OR 97124 Plano, TX 75074 Bothell, WA 9801 (949) 861-8918 (612)-638-5136 (315) 554-8214 (503) 844-4066 (469) 304-5255 (425)984-6600 NVLAP NVLAP Lab Code: 200676-0 NVLAP Lab Code: 200881-0 NVLAP Lab Code: 200761-0 NVLAP Lab Code: 200630-0 NVLAP Lab Code:201049-0 NVLAP Lab Code: 200629-0 Industry Canada 2834B-1, 2834B-3 2834E-1 N/A 2834D-1, 2834D-2 2834G-1 2834F-1 BSMI SL2-IN-E-1154R SL2-IN-E-1152R N/A SL2-IN-E-1017 SL2-IN-E-1158R SL2-IN-E-1153R VCCI A-0029 A-0109 N/A A-0108 A-0201 A-0110 Recognized Phase I CAB for ACMA, BSMI, IDA, KCC/RRA, MIC, MOC, NCC, OFCA US0158 US0175 N/A US0017 US0191 US0157 Report No. INMC0898.1 5/17

PRODUCT DESCRIPTION 2014-12-10 Client and Equipment Under Test (EUT) Information Company Name: Intermec Technologies Corporation Address: 6001 36th Avenue West City, State, Zip: Everett, WA 98203-1264 Test Requested By: Sean MacKellar Model: IP30C Evaluation Date: March 05, 2015 Information Provided by the Party Requesting the Test Functional Description of the EUT: The IP30C is an RFID scan handle that clips to the backside of the Intermec 70 series handheld computers. The Intermec IM11 is a previously certified RFID module that will be installed in the Intermec IP30C handheld RFID reader. The IP30C also contains a WT12 (Bluegiga) Bluetooth module use to communicate the data read by the IM11 to the Intermec 70 series handheld. Testing Objective: To demonstrate compliance with FCC requirements for RF exposure for 2.1091 mobile devices Report No. INMC0898.1 6/17

MAXIMUM PERMISSIBLE EXPOSURE (MPE) WTD.2014.12.17 OVERVIEW Human exposure to RF emissions from mobile devices (47 CFR §2.1091) may be evaluated based on the MPE limits adopted by the FCC for electric and magnetic field strength and/or power density, as appropriate, since exposures are assumed to occur at distances of 20 cm or more from persons. ANSI C95.1-1992 specifies a minimum separation distance of 20 cm for performing reliable field measurements to determine adherence to MPE limits. If the minimum separation distance between a transmitter and nearby persons is more than 20 cm under normal operating conditions, compliance with MPE limits may be determined at such distance from the transmitter. When applicable, operation instructions and prominent warning labels may be used to alert the exposed persons to maintain a specified distance from the transmitter or to limit their exposure durations and usage conditions to ensure compliance. If the use of warning labels on a transmitter is not effective or desirable, the alternative of performing SAR evaluation with the device at its closest range to persons under normal operating conditions may be used. The field strength and power density limits adopted by the FCC are based on whole-body averaged exposure and the assumption of RF field levels relate most accurately to estimating whole-body averaged SAR. This means some local values of exposures exceeding the stated field strength and power density limits may not necessarily imply non-compliance if the spatial average of spatially averaged RF fields over the exposed portions of a person’s body does not exceed the limits. COMPLIANCE WITH 2.1091 “Mobile devices that operate in the Cellular Radiotelephone Service, the Personal Communications Services, the Satellite Communications Services, the General Wireless Communications Service, the Wireless Communications Service, the Maritime Services and the Specialized Mobile Radio Service authorized under subpart H of part 22 of this chapter, parts 24, 25, 26 and 27 of this chapter, part 80 of this chapter (ship earth stations devices only) and part 90 of this chapter are subject to routine environmental evaluation for RF exposure prior to equipment authorization or use if they operate at frequencies of 1.5 GHz or below and their effective radiated power (ERP) is 1.5 watts or more, or if they operate at frequencies above 1.5 GHz and their ERP is 3 watts or more. Unlicensed personal communications service devices, unlicensed millimeter wave devices and unlicensed NII devices authorized under §§15.253, 15.255, and 15.257, and subparts D and E of part 15 of this chapter are also subject to routine environmental evaluation for RF exposure prior to equipment authorization or use if their ERP is 3 watts or more or if they meet the definition of a portable device as specified in §2.1093(b) requiring evaluation under the provisions of that section. All other mobile and unlicensed transmitting devices are categorically excluded from routine environmental evaluation for RF exposure prior to equipment authorization or use, except as specified in §§1.1307(c) and 1.1307(d) of this chapter. Applications for equipment authorization of mobile and unlicensed transmitting devices subject to routine environmental evaluation must contain a statement confirming compliance with the limits specified in paragraph (d) of this section as part of their application.” The EUT will only be used with a separation distance of 23 centimeters or greater between the antennas and the body of the user or nearby persons and can therefore be considered a mobile transmitter per 47 CFR 2.1091(b). Per 47 CFR 1.1310, the EUT meets the General Population / Uncontrolled exposure limits listed in Table 1. COMPLIANCE WITH FCC KDB 447498 D01 General RF Exposure Guidance v05r02 "KDB 447498 D01 General RF Exposure Guidance v05r02" provides the procedures, requirements, and authorization policies for mobile and portable devices. Section 7.2 best fits the exposure condition described in this report. Since these mobile devices are categorically excluded from routine evaluation; simple calculations may be used to estimate the power density to demonstrate compliance with 47 CFR 1.1310 requirements. The attached estimate shows MPE limits are met at a 23 cm boundary. Report No. INMC0898.1 7/17

MAXIMUM PERMISSIBLE EXPOSURE (MPE) WTD.2014.12.17 FCC LIMITS FOR MPE Limits for General Population /Uncontrolled Exposure: 47 CFR 1.1310 Electric Field Magnetic Field Frequency Range Strength Strength Power Density Averaging Time 2 (MHz) (V/m) (A/m) (mW/cm ) (minutes) 0.3 - 1.34 614 1.63 *(100) 30 1.34 - 30 824/f 2.19/f *(180/f2) 30 30 - 300 27.5 0.073 0.2 30 300 - 1500 f/1500 30 1500 - 100000 1 30 f = frequency in MHz * = Plane-wave equivalent power density METHOD OF EVALUATION The exposure level at a 23 cm distance from the EUT’s transmitting antenna is calculated using the general equation: P *G S  4* * R 2 Where: S = power density (mW/cm2) P = power input to the antenna (mW) G = numeric power gain relative to an isotropic radiator R = distance to the center of the radiation of the antenna (23 cm = limit for MPE estimates) P*G = EIRP Solving for S, the maximum power density 23 cm from the transmitting antenna is determined. This level is then compared to the applicable limit for that transmit frequency. This is called the “MPE Ratio”. The MPE ratios for each co-located radio are summed. If the sum is less than or equal to one, then the device is excluded from testing and is deemed compliant. The standalone MPE and summed MPE ratios are summarized in the following table: Report No. INMC0898.1 8/17

MAXIMUM PERMISSIBLE EXPOSURE (MPE) WTD.2014.12.17 EUT: IP30C Work Order: INMC0898 Serial Number: NA Date: 3/30/15 Customer: Intermec Technologies Corporation Temperature (°C): NA Attendees: NA Rel. Humidity (%): NA Customer Project: NA Bar. Pres. (mb): NA Evaluated By: Rod Peloquin Power: NA Job Site: NA TEST SPECIFICATIONS Specification: Method: FCC 2.1091:2012 KDB 447498 D01 General RF Exposure Guidance v05r02 COMMENTS The IP30C is an RFID scan handle that clips to the backside of the handheld computer as an optional accessory. Communication between the computer and the scan handle is via Bluetooth. There is no electrical connection between the two devices. The IM11 UHF RFID radio module is contained within the IP30 hand scanner and is co-located with CK70 hand held computers when they are mounted in the IP30. The duty cycle of the RFID radio is limited to 50% in the software. The IP30C RFID reader cannot operate while worn next to the body. The user is instructed to operate the reader from the hand, aimed toward the remote tags, and pull the trigger to engage the transmitter while maintaining at least a 23cm separation from the RFID antenna and the head or torso. DEVIATIONS FROM TEST STANDARD None Signature Report No. INMC0898.1 9/17

MAXIMUM PERMISSIBLE EXPOSURE (MPE) WTD.2014.12.17 Intermec IP30C containing FCC ID: EHA-IM11 and FCC ID: QOQWT12 co-located with Intermec handheld computer FCC ID: EHA-1000CP01X2 MPE Estimates for Individual Devices (Conducted Measurements) General Ratio of Power Max Peak Duty Cycle Minimum Population Antenna Transmit Power Density Density to the Radio Antenna Type Conducted Duty Cycle Corrected Antenna Gain Antenna Cable Exposure Manufacturer Frequency @ 23 cm Exposure Output Power Output Power Loss Limit from Limit 1.1310 (MHz) (mW) (mW) (dBi) (dB) (mW/cm2) (mW/cm2) UHF RFID Yagi Intermec 902.75 938.21 0.5 469.105 5.2 0 0.234 0.602 0.38827 in IP30C Bluetooth in Advanced Chip 2402 3.258 1 3.258 0.5 0 0.001 1.000 0.00055 IP30C Ceramic X 2462 53.2 1 53.2 3.2 0 0.017 1.000 0.01672 5220 25.1 1 25.1 3.7 0 0.009 1.000 0.00885 Wi-Fi in PIFA Laird 5300 24.5 1 24.5 3.7 0 0.009 1.000 0.00864 Handheld 5600 19.5 1 19.5 4.8 0 0.009 1.000 0.00886 5875 17 1 17 5.0 0 0.008 1.000 0.00809 Bluetooth in PIFA Laird 2480 7 1 7 0.5 0 0.001 1.000 0.00117 Handheld Worst Case Co-located Exposure Conditions Per KDB 447498 D01v05 Section 7.2, the Sum of Worst Case Power Ratios cannot exceed 1.0 IP30C Handheld PC Sum of Worst UHF RFID Bluetooth Wi-Fi Worst Bluetooth Case Ratios Worst Case Worst Case Case Ratio of Worst Case FCC Limit for (Power Ratio of Power Ratio of Power Power Density Ratio of Power Sum of Worst Density to the Density to the Density to the to the Exposure Density to the Case Ratios Exposure Exposure Limit Exposure Limit Limit Exposure Limit Limit) 0.38827 0.00055 0.01672 0.00117 0.40671 1.0 PASS Report No. INMC0898.1 10/17

MAXIMUM PERMISSIBLE EXPOSURE (MPE) WTD.2014.12.17 Intermec IP30C containing FCC ID: EHA-IM11 and FCC ID: QOQWT12 co-located with Intermec handheld computer FCC ID: EHA-1000CP01SX1 MPE Estimates for Individual Devices (Conducted Measurements) General Ratio of Power Max Peak Duty Cycle Minimum Population Antenna Transmit Power Density Density to the Radio Antenna Type Conducted Duty Cycle Corrected Antenna Gain Antenna Cable Exposure Manufacturer Frequency @ 23 cm Exposure Output Power Output Power Loss Limit from Limit 1.1310 (MHz) (mW) (mW) (dBi) (dB) (mW/cm2) (mW/cm2) UHF RFID Yagi Intermec 902.75 938.21 0.5 469.105 5.2 0 0.234 0.602 0.38827 in IP30C Bluetooth in Advanced Chip 2402 3.258 1 3.258 0.5 0 0.001 1.000 0.00055 IP30C Ceramic X 2462 53.2 1 53.2 3.2 0 0.017 1.000 0.01672 5220 25.1 1 25.1 3.7 0 0.009 1.000 0.00885 Wi-Fi in PIFA Laird 5300 24.5 1 24.5 3.7 0 0.009 1.000 0.00864 Handheld 5600 19.5 1 19.5 4.8 0 0.009 1.000 0.00886 5875 17 1 17 5.0 0 0.008 1.000 0.00809 Bluetooth in PIFA Laird 2480 7 1 7 0.5 0 0.001 1.000 0.00117 Handheld MPE Estimates for Individual Devices (Radiated Measurements) General Ratio of Power Duty Cycle Minimum Population Antenna Transmit Max Peak Power Density Density to the Radio Antenna Type Duty Cycle Corrected Antenna Gain Antenna Cable Exposure Manufacturer Frequency EIRP @ 23 cm Exposure Output Power Loss Limit from Limit 1.1310 (MHz) (mW) (mW) (dBi) (dB) (mW/cm2) (mW/cm2) PIFA Laird 836.6 1122 0.5 561 N/A N/A 0.084 0.558 0.15131 UMTS in PIFA Laird 1753 442 1 442 N/A N/A 0.066 1.000 0.06649 Handheld1 PIFA Laird 1880 1548.8 0.5 774.4 N/A N/A 0.116 1.000 0.11649 CDMA in PIFA Laird 824.6 527 1 527 N/A N/A 0.079 0.550 0.14421 Handheld1 PIFA Laird 1851.6 1420 1 1420 N/A N/A 0.214 1.000 0.21361 Note 1: Either the UMTS or CDMA radio is operational - never both at the same time Worst Case Co-located Exposure Conditions Per KDB 447498 D01v05 Section 7.2, the Sum of Worst Case Power Ratios cannot exceed 1.0 IP30C Handheld PC Sum of Worst UHF RFID Bluetooth Wi-Fi Worst Bluetooth UMTS/CDMA Case Ratios Worst Case Worst Case Case Ratio of Worst Case Worst Case FCC Limit for (Power Ratio of Power Ratio of Power Power Density Ratio of Power Ratio of Power Sum of Worst Density to the Density to the Density to the to the Exposure Density to the Density to the Case Ratios Exposure Exposure Limit Exposure Limit Limit Exposure Limit Exposure Limit Limit) 0.38827 0.00055 0.01672 0.00117 0.15131 0.55802 1.0 Pass Report No. INMC0898.1 11/17

MAXIMUM PERMISSIBLE EXPOSURE (MPE) WTD.2014.12.17 Intermec IP30C containing FCC ID: EHA-IM11 and FCC ID: QOQWT12 co-located with Intermec handheld computer FCC ID: EHA-1000CP01UX1 MPE Estimates for Individual Devices (Conducted Measurements) General Ratio of Power Max Peak Duty Cycle Minimum Population Antenna Transmit Power Density Density to the Radio Antenna Type Conducted Duty Cycle Corrected Antenna Gain Antenna Cable Exposure Manufacturer Frequency @ 23 cm Exposure Output Power Output Power Loss Limit from Limit 1.1310 (MHz) (mW) (mW) (dBi) (dB) (mW/cm2) (mW/cm2) UHF RFID Yagi Intermec 902.75 938.21 0.5 469.105 5.2 0 0.234 0.602 0.38827 in IP30C Bluetooth in Advanced Chip 2402 3.258 1 3.258 0.5 0 0.001 1.000 0.00055 IP30C Ceramic X 2462 53.2 1 53.2 3.2 0 0.017 1.000 0.01672 5220 25.1 1 25.1 3.7 0 0.009 1.000 0.00885 Wi-Fi in PIFA Laird 5300 24.5 1 24.5 3.7 0 0.009 1.000 0.00864 Handheld 5600 19.5 1 19.5 4.8 0 0.009 1.000 0.00886 5875 17 1 17 5.0 0 0.008 1.000 0.00809 Bluetooth in PIFA Laird 2480 7 1 7 0.5 0 0.001 1.000 0.00117 Handheld MPE Estimates for Individual Devices (Radiated Measurements) General Ratio of Power Duty Cycle Minimum Population Antenna Transmit Max Peak Power Density Density to the Radio Antenna Type Duty Cycle Corrected Antenna Gain Antenna Cable Exposure Manufacturer Frequency EIRP @ 23 cm Exposure Output Power Loss Limit from Limit 1.1310 (MHz) (mW) (mW) (dBi) (dB) (mW/cm2) (mW/cm2) UMTS in PIFA Laird 848.8 1370 0.5 685 N/A N/A 0.103 0.566 0.18210 Handheld PIFA Laird 1880 1130 0.5 565 N/A N/A 0.085 1.000 0.08499 Worst Case Co-located Exposure Conditions Per KDB 447498 D01v05 Section 7.2, the Sum of Worst Case Power Ratios cannot exceed 1.0 IP30C Handheld PC Sum of Worst UHF RFID Bluetooth Wi-Fi Worst Bluetooth UMTS Case Ratios Worst Case Worst Case Case Ratio of Worst Case Worst Case FCC Limit for (Power Ratio of Power Ratio of Power Power Density Ratio of Power Ratio of Power Sum of Worst Density to the Density to the Density to the to the Exposure Density to the Density to the Case Ratios Exposure Exposure Limit Exposure Limit Limit Exposure Limit Exposure Limit Limit) 0.38827 0.00055 0.01672 0.00117 0.18210 0.58881 1.0 PASS Report No. INMC0898.1 12/17

MAXIMUM PERMISSIBLE EXPOSURE (MPE) WTD.2014.12.17 Intermec IP30C containing FCC ID: EHA-IM11 and FCC ID: QOQWT12 co-located with Intermec handheld computer FCC ID: EHA-1000CP01CX2 MPE Estimates for Individual Devices (Conducted Measurements) General Ratio of Power Max Peak Duty Cycle Minimum Population Antenna Transmit Power Density Density to the Radio Antenna Type Conducted Duty Cycle Corrected Antenna Gain Antenna Cable Exposure Manufacturer Frequency @ 23 cm Exposure Output Power Output Power Loss Limit from Limit 1.1310 (MHz) (mW) (mW) (dBi) (dB) (mW/cm2) (mW/cm2) UHF RFID Yagi Intermec 902.75 938.21 0.5 469.105 5.2 0 0.234 0.602 0.38827 in IP30C Bluetooth in Advanced Chip 2402 3.258 1 3.258 0.5 0 0.001 1.000 0.00055 IP30C Ceramic X 2462 53.2 1 53.2 3.2 0 0.017 1.000 0.01672 5220 25.1 1 25.1 3.7 0 0.009 1.000 0.00885 Wi-Fi in PIFA Laird 5300 24.5 1 24.5 3.7 0 0.009 1.000 0.00864 Handheld 5600 19.5 1 19.5 4.8 0 0.009 1.000 0.00886 5875 17 1 17 5.0 0 0.008 1.000 0.00809 Bluetooth in PIFA Laird 2480 7 1 7 0.5 0 0.001 1.000 0.00117 Handheld MPE Estimates for Individual Devices (Radiated Measurements) General Ratio of Power Duty Cycle Minimum Population Antenna Transmit Max Peak Power Density Density to the Radio Antenna Type Duty Cycle Corrected Antenna Gain Antenna Cable Exposure Manufacturer Frequency EIRP @ 23 cm Exposure Output Power Loss Limit from Limit 1.1310 (MHz) (mW) (mW) (dBi) (dB) (mW/cm2) (mW/cm2) CDMA in PIFA Laird 836.1 667 1 667 N/A N/A 0.100 0.557 0.18001 Handheld PIFA Laird 1851.6 1148 1 1148 N/A N/A 0.173 1.000 0.17269 Worst Case Co-located Exposure Conditions Per KDB 447498 D01v05 Section 7.2, the Sum of Worst Case Power Ratios cannot exceed 1.0 IP30C Handheld PC Sum of Worst UHF RFID Bluetooth Wi-Fi Worst Bluetooth CDMA Case Ratios Worst Case Worst Case Case Ratio of Worst Case Worst Case FCC Limit for (Power Ratio of Power Ratio of Power Power Density Ratio of Power Ratio of Power Sum of Worst Density to the Density to the Density to the to the Exposure Density to the Density to the Case Ratios Exposure Exposure Limit Exposure Limit Limit Exposure Limit Exposure Limit Limit) 0.38827 0.00055 0.01672 0.00117 0.18001 0.58671 1.0 PASS Report No. INMC0898.1 13/17

MAXIMUM PERMISSIBLE EXPOSURE (MPE) WTD.2014.12.17 IP30C without hand held computer installed Report No. INMC0898.1 14/17

MAXIMUM PERMISSIBLE EXPOSURE (MPE) WTD.2014.12.17 CN70 Computer IP30C Report No. INMC0898.1 15/17

MAXIMUM PERMISSIBLE EXPOSURE (MPE) WTD.2014.12.17 CN70e Computer IP30C Report No. INMC0898.1 16/17

MAXIMUM PERMISSIBLE EXPOSURE (MPE) WTD.2014.12.17 CK70x Computer IP30C Report No. INMC0898.1 17/17


Document Created: 2015-04-27 15:37:05
Document Modified: 2015-04-27 15:37:05
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC