UNII Band Declaration

FCC ID: EHA-1007CP02

Cover Letter(s)

Download: PDF
FCCID_2869270

Honeywell International Inc Honeywell Sensing & Product Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA Date: January 7, 2016 UNII Device Declaration Letter To Whom It May Concern, We declare the features below for FCC equipment authorization for Device FCC ID: EHA-1007CP02 (1) DFS Device -- Master Client with Radar detection capability, Client without radar detection capability N/A (2) Active / Passive Scanning, ad-hoc mode access point capability Frequency Band Active Scanning passive scanning Ad Hoc Mode or Access point (MHz) (the device can (where the device WIFI Direct capability transmit a probe is can listen only capability (beacon)) with no probes) 5150-5250 Yes No Yes No Yes No Yes No 5250-5350 Yes No Yes No Yes No Yes No 5470-5725 Yes No Yes No Yes No Yes No 5725-5850 Yes No Yes No Yes No Yes No (3) Yes, No -- The client software and associated drivers will not initiate any transmission on DFS frequencies without initiation by a master. This includes restriction on transmissions for beacons and support for ad-hoc peer-to- peer modes (4) Meet 15.202 requirement - Yes, No, Please check below: A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices. A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network.

Honeywell International Inc Honeywell Sensing & Product Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA (5) Country code selection ability - Yes, No If yes, please explain how it was implemented: (please also help to provide detail of options for each country selection) It is implemented using 802.11d. When connected to an AP, the client would adopt the connected AP’s 802.11d country code and activate the radio driver’s internal channel list and power limit per the adopted country code. (6) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and /or hardware is implemented to ensure that proper operations modes cannot be modified by end user or an installer. Apply, Not Apply, ( If apply, please help to provide explanation on it was implement, and how software was controlled) The software cannot be modified by the end user. Changes are prevented through the use of a proprietary secure boot process. Sincerely yours, Sean MacKellar Product Compliance, Sr. Compliance Engineer Honeywell Sensing and Productivity Solutions 16201 25th Ave West Lynnwood, WA 98087 Tel: +14259214243 sean.mackellar@honeywell.com


Document Created: 2016-01-07 13:45:08
Document Modified: 2016-01-07 13:45:08
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC