Test Report.pdf

FCC ID: E8HRG-1452

Test Report

Download: PDF
FCCID_2496970

FCC TEST REPORT REPORT NO.: RF141218D05-2 MODEL NO.: RG-1452 FCC ID: E8HRG-1452 RECEIVED: Dec. 18, 2014 TESTED: Dec. 22, 2014 ISSUED: Jan. 5, 2015 APPLICANT: Chicony Electronics Co., Ltd. ADDRESS: NO. 25, Wu-Gong 6th Rd., Wugu Dist., New Taipei City 248, Taiwan, R.O.C ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB LOCATION: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C. ) This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: RF141218D05-2 1 of 27 Report Format Version 5.0.0

Table of Contents RELEASE CONTROL RECORD.................................................................................. 3 1. CERTIFICATION ............................................................................................... 4 2. SUMMARY OF TEST RESULTS ....................................................................... 5 2.1 MEASUREMENT UNCERTAINTY .................................................................... 5 3. GENERAL INFORMATION ............................................................................... 6 3.1 GENERAL DESCRIPTION OF EUT .................................................................. 6 3.2 DESCRIPTION OF TEST MODES .................................................................... 7 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL .................... 8 3.3 DESCRIPTION OF SUPPORT UNITS ............................................................ 10 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST ............................................. 10 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ................................. 11 4. TEST TYPES AND RESULTS ......................................................................... 12 4.1 CONDUCTED EMISSION MEASUREMENT .................................................. 12 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT................................ 12 4.1.2 TEST INSTRUMENTS .................................................................................... 12 4.1.3 TEST PROCEDURES ..................................................................................... 13 4.1.4 DEVIATION FROM TEST STANDARD ........................................................... 13 4.1.5 TEST SETUP .................................................................................................. 14 4.1.6 EUT OPERATING CONDITIONS .................................................................... 14 4.1.7 TEST RESULTS .............................................................................................. 15 4.2 RADIATED EMISSION AND BAND EDGE MEASUREMENT ......................... 17 4.2.1 LIMITS OF RADIATED EMISSION AND BAND EDGE MEASUREMENT ...... 17 4.2.2 TEST INSTRUMENTS .................................................................................... 18 4.2.3 TEST PROCEDURES ..................................................................................... 19 4.2.4 DEVIATION FROM TEST STANDARD ........................................................... 19 4.2.5 TEST SETUP .................................................................................................. 20 4.2.6 EUT OPERATING CONDITIONS .................................................................... 20 4.2.7 TEST RESULTS .............................................................................................. 21 5. PHOTOGRAPHS OF THE TEST CONFIGURATION ...................................... 25 6. INFORMATION ON THE TESTING LABORATORIES .................................... 26 7. APPENDIX A – MODIFICATION RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB ......................................................... 27 Report No.: RF141218D05-2 2 of 27 Report Format Version 5.0.0

RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED RF141218D05-2 Original release Jan. 5, 2015 Report No.: RF141218D05-2 3 of 27 Report Format Version 5.0.0

1. CERTIFICATION PRODUCT: Dongle BRAND NAME: hp MODEL NO.: RG-1452 APPLICANT: Chicony Electronics Co., Ltd. TESTED: Dec. 22, 2014 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 15, Subpart C (Section 15.249) ANSI C63.10-2009 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: Jan. 5, 2015 ( Jessica Cheng / Senior Specialist ) APPROVED BY : , DATE: Jan. 5, 2015 ( Rex Lai / Assistant Manager ) Report No.: RF141218D05-2 4 of 27 Report Format Version 5.0.0

2. SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications: APPLIED STANDARD: FCC Part 15, Subpart C (Section 15.249) STANDARD TEST TYPE RESULT REMARK PARAGRAPH Meet the requirement of limit. 15.207 Conducted Emission Test PASS Minimum passing margin is -7.16dB at 0.55615MHz. Radiated Emission Test 15.209 Band Edge Measurement Meet the requirement of limit. 15.249 Limit: 50dB less than the peak value of PASS Minimum passing margin is 15.249 (d) fundamental frequency or meet radiated -13.0dB at 899.27MHz. emission limit in section 15.209 2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. Measurement Frequency Uncertainty Conducted emissions 150kHz~30MHz 3.43 dB 30MHz ~ 1GHz 4.00 dB Radiated emissions Above 1GHz 3.36 dB Report No.: RF141218D05-2 5 of 27 Report Format Version 5.0.0

3. GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT EUT Dongle MODEL NO. RG-1452 POWER SUPPLY 5Vdc from host equipment MODULATION TYPE GFSK OPERATING FREQUENCY 2403MHz ~ 2480MHz NUMBER OF CHANNEL 78 ANTENNA TYPE Printed antenna with 0.5dBi gain DATA CABLE N/A I/O PORT USB port ACCESSORY DEVICES N/A NOTE: 1. The EUT is a Dongle. 2. The above EUT information is declared by the manufacturer and for more detailed features description, please refer to the manufacturer's specifications or User's Manual. Report No.: RF141218D05-2 6 of 27 Report Format Version 5.0.0

3.2 DESCRIPTION OF TEST MODES 78 channels are provided to this EUT: FREQ. FREQ. FREQ. FREQ. CHANNEL CHANNEL CHANNEL CHANNEL (MHz) (MHz) (MHz) (MHz) 1 2403 21 2423 41 2443 61 2463 2 2404 22 2424 42 2444 62 2464 3 2405 23 2425 43 2445 63 2465 4 2406 24 2426 44 2446 64 2466 5 2407 25 2427 45 2447 65 2467 6 2408 26 2428 46 2448 66 2468 7 2409 27 2429 47 2449 67 2469 8 2410 28 2430 48 2450 68 2470 9 2411 29 2431 49 2451 69 2471 10 2412 30 2432 50 2452 70 2472 11 2413 31 2433 51 2453 71 2473 12 2414 32 2434 52 2454 72 2474 13 2415 33 2435 53 2455 73 2475 14 2416 34 2436 54 2456 74 2476 15 2417 35 2437 55 2457 75 2477 16 2418 36 2438 56 2458 76 2478 17 2419 37 2439 57 2459 77 2479 18 2420 38 2440 58 2460 78 2480 19 2421 39 2441 59 2461 20 2422 40 2442 60 2462 Report No.: RF141218D05-2 7 of 27 Report Format Version 5.0.0

3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL EUT APPLICABLE TO CONFIGURE DESCRIPTION MODE PLC RE≥1G RE<1G BM - √ √ √ √ - Where PLC: Power Line Conducted Emission RE≥1G: Radiated Emission above 1GHz RE<1G: Radiated Emission below 1GHz BM: Bandedge Measurement NOTE: The EUT had been pre-tested on the positioned of each 3 axis. The worst case was found when positioned on Z-plane. POWER LINE CONDUCTED EMISSION TEST: Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT CONFIGURE AVAILABLE TESTED MODULATION MODE CHANNEL CHANNEL TYPE - 1 to 78 78 GFSK RADIATED EMISSION TEST (ABOVE 1 GHz):  Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT CONFIGURE AVAILABLE TESTED MODULATION MODE CHANNEL CHANNEL TYPE - 1 to 78 1, 39, 78 GFSK RADIATED EMISSION TEST (BELOW 1 GHz):  Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT CONFIGURE AVAILABLE TESTED MODULATION MODE CHANNEL CHANNEL TYPE - 1 to 78 78 GFSK Report No.: RF141218D05-2 8 of 27 Report Format Version 5.0.0

BANDEDGE MEASUREMENT:  Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT CONFIGURE AVAILABLE TESTED MODULATION MODE CHANNEL CHANNEL TYPE - 1 to 78 1, 78 GFSK TEST CONDITION: APPLICABLE ENVIRONMENTAL INPUT POWER TO TESTED BY CONDITIONS (SYSTEM) PLC 18deg. C, 52%RH 120Vac, 60Hz T. H. Tseng RE≥1G 18deg. C, 75% RH 120Vac, 60Hz Aaron You RE<1G 18deg. C, 75% RH 120Vac, 60Hz Aaron You BM 18deg. C, 75% RH 120Vac, 60Hz Aaron You Report No.: RF141218D05-2 9 of 27 Report Format Version 5.0.0

3.3 DESCRIPTION OF SUPPORT UNITS The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. NO. PRODUCT BRAND MODEL NO. SERIAL NO. FCC ID NOTEBOOK 1 DELL PP27L 8SNZ12S FCC DoC Approved COMPUTER 2 Adapter DELL DA90PS2-00 N/A N/A NOTE: All power cords of the above support units are non shielded (1.8m). 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST EUT (Powered from host equipment) Adapter Notebook Test Table Report No.: RF141218D05-2 10 of 27 Report Format Version 5.0.0

3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C (Section 15.249) ANSI C63.10-2009 All test items have been performed and recorded as per the above standards. NOTE: The product has been verified to comply with the requirements of FCC Part 15, Subpart B, Class B (DoC). The test report has been issued separately. Report No.: RF141218D05-2 11 of 27 Report Format Version 5.0.0

4. TEST TYPES AND RESULTS 4.1 CONDUCTED EMISSION MEASUREMENT 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT FREQUENCY OF EMISSION (MHz) CONDUCTED LIMIT (dBµV) Quasi-peak Average 0.15 ~ 0.5 66 to 56 56 to 46 0.5 ~ 5 56 46 5 ~ 30 60 50 NOTE: 1.The lower limit shall apply at the transition frequencies. 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50MHz. 4.1.2 TEST INSTRUMENTS Description & Manufacturer Model No. Serial No. Cal. Date Cal. Due ROHDE & SCHWARZ ESCS 30 100292 Dec. 18, 2014 Dec. 17, 2015 TEST RECEIVER ROHDE & SCHWARZ Artificial Mains Network ESH2-Z5 100104 Dec. 04, 2014 Dec. 03, 2015 (for EUT) LISN With Adapter (for AD10 C09Ada-001 Dec. 04, 2014 Dec. 03, 2015 EUT) ROHDE & SCHWARZ Artificial Mains Network ESH3-Z5 847265/023 Oct. 21, 2014 Oct. 20, 2015 (for peripherals) SCHWARZBECK Artificial Mains Network NNLK8129 8129229 May 08, 2014 May 07, 2015 (For EUT) Software ADT_Cond_V7.3.7 NA NA NA RF cable (JYEBAO) 5D-FB Cable-C09.01 Feb. 20, 2014 Feb. 19, 2015 SUHNER Terminator (For ROHDE & SCHWARZ 65BNC-5001 E1-010789 May 20, 2014 May 19, 2015 LISN) ROHDE & SCHWARZ Artificial Mains Network ESH3-Z5 100220 Nov. 20, 2014 Nov. 19, 2015 (For TV EUT) LISN With Adapter 100220 N/A Nov. 20, 2014 Nov. 19, 2015 (for TV EUT) Notes: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in Shielded Room No. 9. 3. The VCCI Site Registration No. C-1312. Report No.: RF141218D05-2 12 of 27 Report Format Version 5.0.0

4.1.3 TEST PROCEDURES a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The frequency range from 150kHz to 30MHz was searched. Emission levels under (Limit - 20dB) was not recorded. NOTE: All modes of operation were investigated and the worst-case emissions are reported. 4.1.4 DEVIATION FROM TEST STANDARD No deviation. Report No.: RF141218D05-2 13 of 27 Report Format Version 5.0.0

4.1.5 TEST SETUP V e r ti c a l G ro u n d R e fe r e n c e P l a n e T e s t R e c e iv e r E UT 4 0c m 8 0c m L IS N H o r i z o n ta l G r o u n d R e fe re n c e P l a n e N o te : S u p p o r t u n i ts w e r e c o n n e c te d to s e c o n d L I S N . For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT OPERATING CONDITIONS a. Turn on the power of all equipment. b. Notebook ran a test program (provided by manufacture) to enable EUT under transmitting condition at specific channel continuously. Report No.: RF141218D05-2 14 of 27 Report Format Version 5.0.0

4.1.7 TEST RESULTS CONDUCTED WORST-CASE DATA： PHASE Line 1 6dB BANDWIDTH 9kHz Freq. Corr. Reading Value Emission Level Limit Margin No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.15926 0.20 46.89 45.86 47.09 46.06 65.50 55.50 -18.41 -9.44 2 0.23955 0.22 42.17 40.06 42.39 40.28 62.11 52.11 -19.72 -11.83 3 0.31797 0.23 38.93 36.87 39.16 37.10 59.76 49.76 -20.60 -12.66 4 0.47677 0.26 40.18 37.81 40.44 38.07 56.40 46.40 -15.96 -8.33 5 0.55615 0.27 41.77 38.57 42.04 38.84 56.00 46.00 -13.96 -7.16 6 0.63523 0.28 39.03 34.91 39.31 35.19 56.00 46.00 -16.69 -10.81 7 2.14035 0.39 32.82 28.17 33.21 28.56 56.00 46.00 -22.79 -17.44 Remarks: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level – Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: RF141218D05-2 15 of 27 Report Format Version 5.0.0

PHASE Line 2 6dB BANDWIDTH 9kHz Freq. Corr. Reading Value Emission Level Limit Margin No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.15909 0.20 47.05 45.50 47.25 45.70 65.51 55.51 -18.26 -9.81 2 0.23856 0.23 39.51 35.86 39.74 36.09 62.15 52.15 -22.41 -16.06 3 0.39734 0.26 34.37 33.08 34.63 33.34 57.91 47.91 -23.28 -14.57 4 0.47557 0.27 39.42 37.27 39.69 37.54 56.42 46.42 -16.73 -8.88 5 0.56016 0.28 41.03 36.23 41.31 36.51 56.00 46.00 -14.69 -9.49 6 0.63438 0.29 37.43 34.23 37.72 34.52 56.00 46.00 -18.28 -11.48 7 2.06505 0.40 35.17 30.62 35.57 31.02 56.00 46.00 -20.43 -14.98 Remarks: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level – Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: RF141218D05-2 16 of 27 Report Format Version 5.0.0

4.2 RADIATED EMISSION AND BAND EDGE MEASUREMENT 4.2.1 LIMITS OF RADIATED EMISSION AND BAND EDGE MEASUREMENT The field strength of emissions from intentional radiators operate d within these frequency bands shall comply with the following Field Strength of Field Strength of Fundamental Fundamental Harmonics Frequency (millivolts/meter) (microvolts/meter) 902 ~ 928 MHz 50 500 2400 ~ 2483.5 MHz 50 500 5725 ~ 5875 MHz 50 500 24 ~ 24.25 GHz 250 2500 Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated emission limits as below table, whichever is the lesser attenuation Frequencies Field strength Measurement distance (MHz) (microvolts/meter) (meters) 0.009 ~ 0.490 2400/F(kHz) 300 0.490 ~ 1.705 24000/F(kHz) 30 1.705 ~ 30.0 30 30 30 ~ 88 100 3 88 ~ 216 150 3 216 ~ 960 200 3 Above 960 500 3 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF141218D05-2 17 of 27 Report Format Version 5.0.0

4.2.2 TEST INSTRUMENTS DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL HP Preamplifier 8447D 2432A03504 Feb. 26, 2014 Feb. 25, 2015 HP Preamplifier 8449B 3008A01201 Feb. 26, 2014 Feb. 25, 2015 AMF-6F-260400-3 MITEQ Preamplifier 892164 Mar. 01, 2014 Feb. 28, 2015 3-8P Agilent Spectrum E4446A MY51100009 Jun. 14, 2014 Jun. 13, 2015 Agilent N9038A MY51210129 Jan. 18, 2014 Jan. 17, 2015 TEST RECEIVER Schwarzbeck Antenna VULB 9168 139 Feb. 24, 2014 Feb. 23, 2015 Schwarzbeck Antenna VHBA 9123 480 May 29, 2013 May 28, 2015 Schwarzbeck Horn BBHA-9170 212 Aug. 26, 2014 Aug. 25, 2015 Antenna Schwarzbeck Horn BBHA 9120-D1 D130 Aug. 26, 2014 Aug. 25, 2015 Antenna ADT. Turn Table TT100 0306 NA NA ADT. Tower AT100 0306 NA NA ADT_Radiated_V7. Software NA NA NA 6.15.9.4 SUHNER RF cable SF104 CABLE-CH6 Aug. 15, 2014 Aug. 14, 2015 SUHNER RF cable SF102 Cable-CH8-3.6m Aug. 15, 2014 Aug. 14, 2015 EMCO Horn Antenna 3115 00028257 Aug. 28, 2014 Aug. 27, 2015 Highpass filter WHK SN 8 NA NA Wainwright Instruments 3.1/18G-10SS NOTE: 1. The calibration interval of the above test instruments is 12/24 months. And the calibrations are traceable to NML/ROC and NIST/USA. 2. The horn antenna and HP preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 3. The test was performed in Chamber No. 6. 4. The Industry Canada Reference No. IC 7450E-6. 5. The FCC Site Registration No. is 447212. Report No.: RF141218D05-2 18 of 27 Report Format Version 5.0.0

4.2.3 TEST PROCEDURES a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter semi-anechoic chamber. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The antenna is a broadband antenna, and its height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. f. If the emission level of the EUT in peak mode was lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions would be re-tested one by one using peak, quasi-peak or average method as specified and then reported in a data sheet. NOTE: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and video bandwidth is 3MHz for Peak detection at frequency above 1GHz. 3. All modes of operation were investigated and the worst-case emissions are reported. 4.2.4 DEVIATION FROM TEST STANDARD No deviation. Report No.: RF141218D05-2 19 of 27 Report Format Version 5.0.0

4.2.5 TEST SETUP Frequency range 30MHz~1GHz Ant. Tower 1-4m Variable 3m EUT& Support Units Turn Table 80cm Ground Plane Spectrum analyzer Frequency range above 1GHz For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.2.6 EUT OPERATING CONDITIONS Set the EUT under transmission condition continuously at specific channel frequency. Report No.: RF141218D05-2 20 of 27 Report Format Version 5.0.0

4.2.7 TEST RESULTS ABOVE 1GHz DATA CHANNEL TX Channel 1 Peak (PK) DETECTOR FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.00 53.4 PK 74.0 -20.6 1.06 H 321 57.56 -4.20 2 2390.00 38.9 AV 54.0 -15.2 1.06 H 321 43.05 -4.20 3 2400.00 45.2 PK 74.0 -28.8 1.06 H 321 49.33 -4.14 4 2400.00 24.6 AV 54.0 -29.4 1.06 H 321 28.74 -4.14 5 *2403.00 86.1 PK 114.0 -27.9 1.06 H 321 90.19 -4.12 6 *2403.00 65.5 AV 94.0 -28.5 1.06 H 321 69.60 -4.12 7 4806.00 45.1 PK 74.0 -28.9 1.00 H 135 42.76 2.35 8 4806.00 32.6 AV 54.0 -21.4 1.00 H 135 30.25 2.35 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.00 52.2 PK 74.0 -21.8 1.00 V 175 56.43 -4.20 2 2390.00 38.7 AV 54.0 -15.3 1.00 V 175 42.92 -4.20 3 2400.00 42.7 PK 74.0 -31.3 1.00 V 175 46.84 -4.14 4 2400.00 24.1 AV 54.0 -30.0 1.00 V 175 28.19 -4.14 5 *2403.00 83.7 PK 114.0 -30.4 1.00 V 175 87.77 -4.12 6 *2403.00 65.0 AV 94.0 -29.0 1.00 V 175 69.12 -4.12 7 4806.00 45.7 PK 74.0 -28.3 1.03 V 152 43.38 2.35 8 4806.00 33.7 AV 54.0 -20.3 1.03 V 152 31.32 2.35 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF141218D05-2 21 of 27 Report Format Version 5.0.0

CHANNEL TX Channel 39 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2441.00 88.2 PK 114.0 -25.8 1.08 H 358 92.11 -3.95 2 *2441.00 67.0 AV 94.0 -27.0 1.08 H 358 70.94 -3.95 3 4882.00 45.7 PK 74.0 -28.3 1.00 H 127 43.19 2.47 4 4882.00 33.4 AV 54.0 -20.6 1.00 H 127 30.97 2.47 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2441.00 81.8 PK 114.0 -32.2 1.00 V 179 85.77 -3.95 2 *2441.00 63.4 AV 94.0 -30.7 1.00 V 179 67.30 -3.95 3 4882.00 46.5 PK 74.0 -27.5 1.05 V 161 44.02 2.47 4 4882.00 33.7 AV 54.0 -20.3 1.05 V 161 31.25 2.47 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF141218D05-2 22 of 27 Report Format Version 5.0.0

CHANNEL TX Channel 78 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2480.00 85.8 PK 114.0 -28.2 1.10 H 360 89.57 -3.78 2 *2480.00 65.5 AV 94.0 -28.5 1.10 H 360 69.32 -3.78 3 2483.50 42.4 PK 74.0 -31.6 1.10 H 360 46.15 -3.77 4 2483.50 22.1 AV 54.0 -31.9 1.10 H 360 25.90 -3.77 5 4960.00 45.8 PK 74.0 -28.2 1.00 H 140 43.25 2.59 6 4960.00 33.2 AV 54.0 -20.8 1.00 H 140 30.62 2.59 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2480.00 80.3 PK 114.0 -33.8 1.00 V 112 84.03 -3.78 2 *2480.00 63.2 AV 94.0 -30.8 1.00 V 112 66.97 -3.78 3 2483.50 38.7 PK 74.0 -35.3 1.00 V 112 42.49 -3.77 4 2483.50 21.7 AV 54.0 -32.3 1.00 V 112 25.43 -3.77 5 4960.00 46.6 PK 74.0 -27.4 1.05 V 168 43.98 2.59 6 4960.00 34.0 AV 54.0 -20.0 1.05 V 168 31.37 2.59 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF141218D05-2 23 of 27 Report Format Version 5.0.0

BELOW 1GHz WORST-CASE DATA CHANNEL TX Channel 78 DETECTOR Quasi-Peak (QP) FREQUENCY RANGE 30MHz ~ 1GHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 165.90 31.5 QP 43.5 -12.0 2.27 H 51 44.97 -13.49 2 221.14 33.3 QP 46.0 -12.8 2.51 H 338 49.27 -16.02 3 299.51 30.5 QP 46.0 -15.5 1.88 H 338 42.63 -12.10 4 380.99 33.6 QP 46.0 -12.4 1.63 H 120 44.11 -10.52 5 527.95 27.5 QP 46.0 -18.5 1.27 H 130 35.30 -7.77 6 899.27 33.0 QP 46.0 -13.0 1.00 H 226 34.42 -1.40 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 35.87 25.2 QP 40.0 -14.8 1.12 V 197 40.30 -15.10 2 67.54 24.5 QP 40.0 -15.5 1.00 V 46 39.75 -15.27 3 166.58 29.8 QP 43.5 -13.7 1.00 V 49 43.37 -13.53 4 374.30 28.0 QP 46.0 -18.0 1.34 V 281 38.57 -10.59 5 528.05 25.1 QP 46.0 -20.9 2.08 V 164 32.86 -7.77 6 800.03 29.3 QP 46.0 -16.7 1.96 V 87 32.18 -2.91 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value Report No.: RF141218D05-2 24 of 27 Report Format Version 5.0.0

5. PHOTOGRAPHS OF THE TEST CONFIGURATION Please refer to the attached file (Test Setup Photo). Report No.: RF141218D05-2 25 of 27 Report Format Version 5.0.0

6. INFORMATION ON THE TESTING LABORATORIES We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab Hsin Chu EMC/RF/Telecom Lab Tel: 886-2-26052180 Tel: 886-3-5935343 Fax: 886-2-26051924 Fax: 886-3-5935342 Hwa Ya EMC/RF/Safety Lab Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. Report No.: RF141218D05-2 26 of 27 Report Format Version 5.0.0

7. APPENDIX A – MODIFICATION RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB No modifications were made to the EUT by the lab during the test. ---END--- Report No.: RF141218D05-2 27 of 27 Report Format Version 5.0.0


Document Created: 2015-01-08 17:23:39
Document Modified: 2015-01-08 17:23:39
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC