Test Report

FCC ID: E8HRG-1452-1

Test Report

Download: PDF
FCCID_3178566

FCC Test Report Report No.: RF161017D08 FCC ID: E8HRG-1452-1 Test Model: RG-1452 Received Date: Sep. 22, 2016 Test Date: Sep. 22 ~ Oct. 19, 2016 Issued Date: Oct. 20, 2016 Applicant: Chicony Electronics Co., Ltd. Address: No.69, Sec. 2, Guangfu Rd., Sanchong Dist., New Taipei City 241, Taiwan(R.O.C.) Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan (R.O.C.) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF161017D08 Page No. 1 / 25 Report Format Version: 6.1.1

Table of Contents Release Control Record ............................................................................................................................. 3 1 Certificate of Conformity ................................................................................................................. 4 2 Summary of Test Results ................................................................................................................ 5 2.1 Measurement Uncertainty............................................................................................................... 5 2.2 Modification Record........................................................................................................................ 5 3 General Information ......................................................................................................................... 6 3.1 General Description of EUT ............................................................................................................ 6 3.2 Description of Test Modes .............................................................................................................. 7 3.2.1 Test Mode Applicability and Tested Channel Detail .......................................................................... 8 3.3 Description of Support Units ........................................................................................................... 9 3.3.1 Configuration of System under Test ................................................................................................ 9 3.4 General Description of Applied Standards ..................................................................................... 10 4 Test Types and Results.................................................................................................................. 11 4.1 Radiated Emission and Bandedge Measurement...........................................................................11 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................11 4.1.2 Test Instruments ........................................................................................................................... 12 4.1.3 Test Procedures ........................................................................................................................... 13 4.1.4 Deviation from Test Standard ........................................................................................................ 13 4.1.5 Test Setup .................................................................................................................................... 14 4.1.6 EUT Operating Conditions ............................................................................................................ 15 4.1.7 Test Results.................................................................................................................................. 16 4.2 Conducted Emission Measurement .............................................................................................. 20 4.2.1 Limits of Conducted Emission Measurement................................................................................. 20 4.2.2 Test Instruments ........................................................................................................................... 20 4.2.3 Test Procedures ........................................................................................................................... 21 4.2.4 Deviation from Test Standard ........................................................................................................ 21 4.2.5 Test Setup .................................................................................................................................... 21 4.2.6 EUT Operating Conditions ............................................................................................................ 21 4.2.7 Test Results.................................................................................................................................. 22 5 Pictures of Test Arrangements...................................................................................................... 24 Appendix – Information on the Testing Laboratories ............................................................................. 25 Report No.: RF161017D08 Page No. 2 / 25 Report Format Version: 6.1.1

Release Control Record Issue No. Description Date Issued RF161017D08 Original release. Oct. 20, 2016 Report No.: RF161017D08 Page No. 3 / 25 Report Format Version: 6.1.1

1 Certificate of Conformity Product: Dongle Brand: hp Test Model: RG-1452 Sample Status: Engineering sample Applicant: Chicony Electronics Co., Ltd. Test Date: Sep. 22 ~ Oct. 19, 2016 Standards: 47 CFR FCC Part 15, Subpart C (Section 15.249) ANSI C63.10: 2013 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: Oct. 20, 2016 Celia Chen / Supervisor Approved by : , Date: Oct. 20, 2016 Rex Lai / Assistant Manager Report No.: RF161017D08 Page No. 4 / 25 Report Format Version: 6.1.1

2 Summary of Test Results 47 CFR FCC Part 15, Subpart C (SECTION 15.249) FCC Test Item Result Remarks Clause Meet the requirement of limit. 15.207 AC Power Conducted Emission PASS Minimum passing margin is -19.33dB at 3.26953MHz. Radiated Emission Test Band Edge Measurement 15.209 Meet the requirement of limit. Limit: 50dB less than the peak value 15.249 PASS Minimum passing margin is of fundamental frequency or meet 15.249 (d) -11.33dB at 47.99MHz. radiated emission limit in section 15.209 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: Expanded Uncertainty Measurement Frequency (k=2) (±) Conducted Emissions at mains ports 150kHz ~ 30MHz 2.78 dB 9kHz ~ 30MHz 2.38 dB Radiated Emissions up to 1 GHz 30MHz ~ 1000MHz 5.32 dB Radiated Emissions above 1 GHz 1GHz ~ 40GHz 3.36 dB 2.2 Modification Record There were no modifications required for compliance. Report No.: RF161017D08 Page No. 5 / 25 Report Format Version: 6.1.1

3 General Information 3.1 General Description of EUT Product Dongle Brand hp Test Model RG-1452 Status of EUT Engineering sample Power Supply Rating 5Vdc from host equipment Modulation Type GFSK Operating Frequency 2403MHz ~ 2480MHz Number of Channel 78 Antenna Type Printed antenna with 0.5dBi gain Antenna Connector N/A Accessory Device N/A Data Cable Supplied N/A Note: 1. The EUT is a Dongle. 2. The above EUT information is declared by the manufacturer and for more detailed features description, please refer to the manufacturer's specifications or User's Manual. Report No.: RF161017D08 Page No. 6 / 25 Report Format Version: 6.1.1

3.2 Description of Test Modes 78 channels are provided to this EUT: FREQ. FREQ. FREQ. FREQ. CHANNEL CHANNEL CHANNEL CHANNEL (MHz) (MHz) (MHz) (MHz) 1 2403 21 2423 41 2443 61 2463 2 2404 22 2424 42 2444 62 2464 3 2405 23 2425 43 2445 63 2465 4 2406 24 2426 44 2446 64 2466 5 2407 25 2427 45 2447 65 2467 6 2408 26 2428 46 2448 66 2468 7 2409 27 2429 47 2449 67 2469 8 2410 28 2430 48 2450 68 2470 9 2411 29 2431 49 2451 69 2471 10 2412 30 2432 50 2452 70 2472 11 2413 31 2433 51 2453 71 2473 12 2414 32 2434 52 2454 72 2474 13 2415 33 2435 53 2455 73 2475 14 2416 34 2436 54 2456 74 2476 15 2417 35 2437 55 2457 75 2477 16 2418 36 2438 56 2458 76 2478 17 2419 37 2439 57 2459 77 2479 18 2420 38 2440 58 2460 78 2480 19 2421 39 2441 59 2461 20 2422 40 2442 60 2462 Report No.: RF161017D08 Page No. 7 / 25 Report Format Version: 6.1.1

3.2.1 Test Mode Applicability and Tested Channel Detail EUT APPLICABLE TO CONFIGURE DESCRIPTION MODE RE≥1G RE<1G PLC - √ √ √ - Where RE≥1G: Radiated Emission above 1GHz & Bandedge Measurement RE<1G: Radiated Emission below 1GHz PLC: Power Line Conducted Emission NOTE: The EUT had been pre-tested on the positioned of each 3 axis. The worst case was found when positioned on Y-plane. NOTE: “-”means no effect. Radiated Emission Test (Above 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT CONFIGURE MODE AVAILABLE CHANNEL TESTED CHANNEL MODULATION TYPE - 1 to 78 1, 39, 78 GFSK Radiated Emission Test (Below 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT CONFIGURE MODE AVAILABLE CHANNEL TESTED CHANNEL MODULATION TYPE - 1 to 78 1 GFSK Power Line Conducted Emission Test: Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT CONFIGURE MODE AVAILABLE CHANNEL TESTED CHANNEL MODULATION TYPE - 1 to 78 1 GFSK Test Condition: APPLICABLE TO ENVIRONMENTAL CONDITIONS INPUT POWER (System) TESTED BY RE≥1G 29deg. C, 75%RH 120Vac, 60Hz Ian Chang RE<1G 29deg. C, 75%RH 120Vac, 60Hz Ian Chang PLC 26deg. C, 78%RH 120Vac, 60Hz Aaron You Report No.: RF161017D08 Page No. 8 / 25 Report Format Version: 6.1.1

3.3 Description of Support Units The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. ID Product Brand Model No. Serial No. FCC ID Remarks A. Notebook DELL E5410 BW33YM1 FCC DoC Approved Provided by Lab Note: All power cords of the above support units are non-shielded (1.8m). 3.3.1 Configuration of System under Test EUT (Dongle) (Powered from host equipment) Notebook (A) Report No.: RF161017D08 Page No. 9 / 25 Report Format Version: 6.1.1

3.4 General Description of Applied Standards The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C (15.249) ANSI C63.10-2013 All test items have been performed and recorded as per the above standards. NOTE: The EUT has been verified to comply with the requirements of FCC Part 15, Subpart B, Class B (DoC). The test report has been issued separately. Report No.: RF161017D08 Page No. 10 / 25 Report Format Version: 6.1.1

4 Test Types and Results 4.1 Radiated Emission and Bandedge Measurement 4.1.1 Limits of Radiated Emission and Bandedge Measurement The field strength of emissions from intentional radiators operated within these frequency bands shall comply with the following Fundamental Field Strength of Fundamental Field Strength of Harmonics Frequency (millivolts/meter) (microvolts/meter) 902 ~ 928 MHz 50 500 2400 ~ 2483.5 MHz 50 500 5725 ~ 5875 MHz 50 500 24 ~ 24.25 GHz 250 2500 Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated emission limits as below table, whichever is the lesser attenuation Frequencies Field Strength Measurement Distance (MHz) (microvolts/meter) (meters) 0.009 ~ 0.490 2400/F(kHz) 300 0.490 ~ 1.705 24000/F(kHz) 30 1.705 ~ 30.0 30 30 30 ~ 88 100 3 88 ~ 216 150 3 216 ~ 960 200 3 Above 960 500 3 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF161017D08 Page No. 11 / 25 Report Format Version: 6.1.1

4.1.2 Test Instruments DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL HP Preamplifier 8447D 2432A03504 Feb. 26, 2016 Feb. 25, 2017 HP Preamplifier 8449B 3008A01201 Feb. 26, 2016 Feb. 25, 2017 MITEQ Preamplifier AMF-6F-260400-33-8P 892164 Mar. 01, 2016 Feb. 28, 2017 Agilent N9038A MY51210129 Feb. 02, 2016 Feb. 01, 2017 TEST RECEIVER Schwarzbeck Antenna VULB 9168 139 Jan. 04, 2016 Jan. 03, 2017 Schwarzbeck Antenna VHBA 9123 480 May 29, 2015 May 28, 2017 Schwarzbeck Horn Antenna BBHA-9170 212 Jan. 08, 2016 Jan. 07, 2017 Schwarzbeck Horn Antenna BBHA 9120-D1 D130 Jan. 21, 2016 Jan. 20, 2017 ADT. Turn Table TT100 0306 NA NA ADT. Tower AT100 0306 NA NA Software Radiated_V7.6.15.9.5 NA NA NA SUHNER RF cable SF104 CABLE-CH6 Aug. 15, 2016 Aug. 14, 2017 With 4dB PAD SUHNER RF cable SF102 Cable-CH8-3.6m Aug. 15, 2016 Aug. 14, 2017 With 3dB PAD KEYSIGHT MIMO U2021XA U2021XA-001 May 25, 2016 May 24, 2017 Powermeasurement Test set KEYSIGHT N9030A MY54490260 Jul. 26, 2016 Jul. 25, 2017 Spectrum Analyzer Loop Antenna EMCI LPA600 270 Aug. 20, 2015 Aug. 19, 2017 EMCO Horn Antenna 3115 00028257 Jan. 19, 2016 Jan. 18, 2017 Highpass filter WHK 3.1/18G-10SS SN 8 NA NA Wainwright Instruments NOTE: 1. The calibration interval of the above test instruments is 12/24 months. And the calibrations are traceable to NML/ROC and NIST/USA. 2. The horn antenna and HP preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 3. The test was performed in Chamber No. 6. 4. The Industry Canada Reference No. IC 7450E-6. 5. The FCC Site Registration No. is 447212. Report No.: RF161017D08 Page No. 12 / 25 Report Format Version: 6.1.1

4.1.3 Test Procedures For Radiated emission below 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter chamber room. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. Both X and Y axes of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Quasi-Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. Note: The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 9kHz at frequency below 30MHz. For Radiated emission above 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters (for 30MHz ~ 1GHz) / 1.5 meters (for above 1GHz) above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 3. All modes of operation were investigated and the worst-case emissions are reported. 4.1.4 Deviation from Test Standard No deviation. Report No.: RF161017D08 Page No. 13 / 25 Report Format Version: 6.1.1

4.1.5 Test Setup For Radiated emission below 30MHz 1m EUT& 3m Support Units Turn Table 80cm Ground Plane Test Receiver For Radiated emission 30MHz to 1GHz Ant. Tower 1-4m Variable 3m 10m EUT& Support Units Turn Table 80cm Ground Plane Test Receiver Report No.: RF161017D08 Page No. 14 / 25 Report Format Version: 6.1.1

For Radiated emission above 1GHz Ant. Tower 1-4m Variable EUT& 3m Support Units Turn Table Absorber 150cm Ground Plane Test Receiver For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT Operating Conditions Set the EUT under transmission condition continuously at specific channel frequency. Report No.: RF161017D08 Page No. 15 / 25 Report Format Version: 6.1.1

4.1.7 Test Results ABOVE 1GHz DATA CHANNEL TX Channel 1 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.00 59.85 PK 74.00 -14.15 1.09 H 343 59.42 0.43 2 2390.00 41.08 AV 54.00 -12.92 1.09 H 343 40.65 0.43 3 2400.00 58.63 PK 74.00 -15.37 1.09 H 343 58.15 0.48 4 2400.00 30.65 AV 54.00 -23.35 1.09 H 343 30.17 0.48 5 *2403.00 94.82 PK 114.00 -19.18 1.09 H 343 94.32 0.50 6 *2403.00 66.84 AV 94.00 -27.16 1.09 H 343 66.34 0.50 7 4806.00 46.04 PK 74.00 -27.96 1.59 H 180 39.23 6.81 8 4806.00 18.06 AV 54.00 -35.94 1.59 H 180 11.25 6.81 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.00 60.06 PK 74.00 -13.94 2.91 V 60 59.63 0.43 2 2390.00 41.28 AV 54.00 -12.72 2.91 V 60 40.85 0.43 3 2400.00 58.92 PK 74.00 -15.08 2.91 V 60 58.44 0.48 4 2400.00 30.94 AV 54.00 -23.06 2.91 V 60 30.46 0.48 5 *2403.00 95.11 PK 114.00 -18.89 2.91 V 60 94.61 0.50 6 *2403.00 67.13 AV 94.00 -26.87 2.91 V 60 66.63 0.50 7 4806.00 46.70 PK 74.00 -27.30 1.45 V 239 39.89 6.81 8 4806.00 18.72 AV 54.00 -35.28 1.45 V 239 11.91 6.81 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF161017D08 Page No. 16 / 25 Report Format Version: 6.1.1

CHANNEL TX Channel 39 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2441.00 95.85 PK 114.00 -18.15 1.12 H 351 95.12 0.73 2 *2441.00 67.87 AV 94.00 -26.13 1.12 H 351 67.14 0.73 3 4882.00 47.06 PK 74.00 -26.94 1.36 H 216 40.22 6.84 4 4882.00 19.73 AV 54.00 -34.27 1.36 H 216 12.89 6.84 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2441.00 96.18 PK 114.00 -17.82 2.89 V 56 95.45 0.73 2 *2441.00 68.20 AV 94.00 -25.80 2.89 V 56 67.47 0.73 3 4882.00 48.00 PK 74.00 -26.00 1.84 V 206 41.16 6.84 4 4882.00 20.02 AV 54.00 -33.98 1.84 V 206 13.18 6.84 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF161017D08 Page No. 17 / 25 Report Format Version: 6.1.1

CHANNEL TX Channel 78 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2480.00 92.95 PK 114.00 -21.05 1.13 H 341 91.98 0.97 2 *2480.00 64.97 AV 94.00 -29.03 1.13 H 341 64.00 0.97 3 2483.50 48.81 PK 74.00 -25.19 1.13 H 341 47.82 0.99 4 2483.50 20.83 AV 54.00 -33.17 1.13 H 341 19.84 0.99 5 4960.00 46.62 PK 74.00 -27.38 1.38 H 241 39.64 6.98 6 4960.00 18.59 AV 54.00 -35.41 1.38 H 241 11.61 6.98 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2480.00 93.21 PK 114.00 -20.79 2.71 V 64 92.24 0.97 2 *2480.00 65.23 AV 94.00 -28.77 2.71 V 64 64.26 0.97 3 2483.50 48.97 PK 74.00 -25.03 2.71 V 64 47.98 0.99 4 2483.50 20.99 AV 54.00 -33.01 2.71 V 64 20.00 0.99 5 4960.00 47.14 PK 74.00 -26.86 2.01 V 23 40.16 6.98 6 4960.00 19.16 AV 54.00 -34.84 2.01 V 23 12.18 6.98 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF161017D08 Page No. 18 / 25 Report Format Version: 6.1.1

BELOW 1GHz WORST-CASE DATA CHANNEL TX Channel 1 DETECTOR Quasi-Peak (QP) FREQUENCY RANGE 9kHz ~ 1GHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 32.72 23.65 QP 40.00 -16.35 2.39 H 288 34.77 -11.12 2 99.94 19.99 QP 43.50 -23.51 2.41 H 302 34.06 -14.07 3 199.12 27.19 QP 43.50 -16.31 1.95 H 142 39.02 -11.83 4 240.00 28.81 QP 46.00 -17.19 1.55 H 264 39.08 -10.27 5 290.30 29.22 QP 46.00 -16.78 1.74 H 262 37.07 -7.85 6 386.09 27.20 QP 46.00 -18.80 1.02 H 163 32.96 -5.76 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 47.99 28.67 QP 40.00 -11.33 1.52 V 234 38.31 -9.64 2 143.97 26.60 QP 43.50 -16.90 1.33 V 309 36.24 -9.64 3 165.95 27.91 QP 43.50 -15.59 2.05 V 299 37.37 -9.46 4 199.90 25.83 QP 43.50 -17.67 2.41 V 283 37.66 -11.83 5 240.00 25.45 QP 46.00 -20.55 1.87 V 272 35.72 -10.27 6 528.00 27.27 QP 46.00 -18.73 1.10 V 305 30.14 -2.87 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value Report No.: RF161017D08 Page No. 19 / 25 Report Format Version: 6.1.1

4.2 Conducted Emission Measurement 4.2.1 Limits of Conducted Emission Measurement Conducted Limit (dBuV) Frequency (MHz) Quasi-peak Average 0.15 - 0.5 66 - 56 56 - 46 0.50 - 5.0 56 46 5.0 - 30.0 60 50 Note: 1. The lower limit shall apply at the transition frequencies. 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50MHz. 4.2.2 Test Instruments Description & Manufacturer Model No. Serial No. Cal. Date Cal. Due ROHDE & SCHWARZ ESCS 30 838251/021 Oct. 26, 2015 Oct. 25, 2016 TEST RECEIVER ROHDE & SCHWARZ Artificial Mains Network (For ENV216 101195 Apr. 25, 2016 Apr. 24, 2017 EUT) LISN With Adapter AD10 C03Ada-002 Apr. 25, 2016 Apr. 24, 2017 (for EUT) EMCO L.I.S.N. 3825/2 9504-2359 Jul. 25, 2016 Jul. 24, 2017 (For peripherals) SCHWARZBECK Artificial Mains Network (For NNLK8129 8129229 May 04, 2016 May 03, 2017 EUT) Software Cond_V7.3.7.4 NA NA NA RF cable (JYEBAO) 5D-FB Cable-C03.01 Sep. 22, 2016 Sep. 21, 2017 With10dB PAD LYNICS Terminator (For 0900510 E1-01-300 Jan. 20, 2016 Jan. 19, 2017 EMCO LISN) LYNICS Terminator (For 0900510 E1-01-301 Jan. 20, 2016 Jan. 19, 2017 EMCO LISN) ROHDE & SCHWARZ Artificial Mains Network (For ESH3-Z5 100220 Nov. 13, 2015 Nov. 12, 2016 TV EUT) LISN With Adapter 100220 N/A Nov. 13, 2015 Nov. 12, 2016 (for TV EUT) Notes: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in Shielded Room No. 3. 3. The VCCI Site Registration No. C-274. Report No.: RF161017D08 Page No. 20 / 25 Report Format Version: 6.1.1

4.2.3 Test Procedures a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The frequency range from 150kHz to 30MHz was searched. Emission levels under (Limit - 20dB) was not recorded. NOTE: The resolution bandwidth and video bandwidth of test receiver is 9kHz for quasi-peak detection (QP) and average detection (AV) at frequency 0.15MHz-30MHz. 4.2.4 Deviation from Test Standard No deviation. 4.2.5 Test Setup Vertical Ground Reference Plane Test Receiver EUT 40cm 80cm LISN Horizontal Ground Reference Plane Note: Support units were connected to second LISN. For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.2.6 EUT Operating Conditions Same as item 4.1.6. Report No.: RF161017D08 Page No. 21 / 25 Report Format Version: 6.1.1

4.2.7 Test Results Detector Function & Quasi-Peak (QP) / Frequency Range 150kHz ~ 30MHz Resolution Bandwidth Average (AV), 9kHz Phase Of Power : Line (L) Frequency Correction Reading Value Emission Level Limit Margin No Factor (dBuV) (dBuV) (dBuV) (dB) (MHz) (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.16172 9.74 34.92 19.61 44.66 29.35 65.38 55.38 -20.72 -26.03 2 0.21250 9.75 28.01 14.82 37.76 24.57 63.11 53.11 -25.35 -28.54 3 1.05469 9.78 20.07 9.69 29.85 19.47 56.00 46.00 -26.15 -26.53 4 1.55859 9.80 19.57 8.46 29.37 18.26 56.00 46.00 -26.63 -27.74 5 3.26953 9.81 25.31 16.86 35.12 26.67 56.00 46.00 -20.88 -19.33 6 18.03125 10.00 13.92 7.64 23.92 17.64 60.00 50.00 -36.08 -32.36 7 29.74219 10.00 15.70 8.59 25.70 18.59 60.00 50.00 -34.30 -31.41 Remarks: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level – Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: RF161017D08 Page No. 22 / 25 Report Format Version: 6.1.1

Detector Function & Quasi-Peak (QP) / Frequency Range 150kHz ~ 30MHz Resolution Bandwidth Average (AV), 9kHz Phase Of Power : Neutral (N) Frequency Correction Reading Value Emission Level Limit Margin No Factor (dBuV) (dBuV) (dBuV) (dB) (MHz) (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.16562 9.70 33.53 19.75 43.23 29.45 65.18 55.18 -21.95 -25.73 2 0.18516 9.70 32.00 14.35 41.70 24.05 64.25 54.25 -22.55 -30.20 3 0.21250 9.70 27.25 10.58 36.95 20.28 63.11 53.11 -26.16 -32.83 4 0.37656 9.72 20.83 13.84 30.55 23.56 58.35 48.35 -27.80 -24.79 5 1.87500 9.74 20.65 10.93 30.39 20.67 56.00 46.00 -25.61 -25.33 6 2.20703 9.75 20.94 12.48 30.69 22.23 56.00 46.00 -25.31 -23.77 7 3.13672 9.76 21.88 13.53 31.64 23.29 56.00 46.00 -24.36 -22.71 8 29.69141 10.06 16.09 8.90 26.15 18.96 60.00 50.00 -33.85 -31.04 Remarks: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level – Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: RF161017D08 Page No. 23 / 25 Report Format Version: 6.1.1

5 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: RF161017D08 Page No. 24 / 25 Report Format Version: 6.1.1

Appendix – Information on the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab Hsin Chu EMC/RF/Telecom Lab Tel: 886-2-26052180 Tel: 886-3-6668565 Fax: 886-2-26051924 Fax: 886-3-6668323 Hwa Ya EMC/RF/Safety Lab Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. --- END --- Report No.: RF161017D08 Page No. 25 / 25 Report Format Version: 6.1.1


Document Created: 2016-10-25 09:21:38
Document Modified: 2016-10-25 09:21:38
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC