Test Report

FCC ID: E8HKR-0309

Test Report

Download: PDF
FCCID_363267

______] weurrRon Emc iaB. | Report No. : NEI—FCC—P—03032 Measurement Report FCC ID:E8HKR—0309 This report concerns (check one) : {WiWfOriginal Grant |__|Class II Change Issued Date : Oct. 02, 2003 Project No. : 03E0590 Equipment : Wireless Keyboard Model No. : KR—0309 Applicant : Chicony Electronics Co., Ltd. No. 25 Wu—Gong 6 Th Rd., Wu—Ku Industrial Park, Taipei Hsien, Taiwan, R.O.C. Tested by : Neutron Engineering Inc. EMC Laboratory Data of Test : Sep. 23, 2003 ~ Sep. 30, 2003 Testing Engineer : Technical Manager : Authorized Signatory : NEUTRON ENGINEERING INC. No. 132—1, Lane 329, Sec. 2, Palain Rd., Shijr Jen, Taipei, Taiwan TEL : (02) 2646—5426 FAX : (02) 2646—6815 o d b Eis NVLM 4 1acMra Lab Code: 200145—0 1/35

[ weurhow eme Las. Report No. : NELFCG—P—03032 Declaration Neutron represents to the clientthattestng is done in accordence with stendard procedures as applicable and that testinstruments used has been callbrated with the stendards tracoable to Netlonal Meesurement Laboratory (NML) of R.0.C.,or Natlonl Insfute of Standards and Technology (NIST) of U.SA, Neutron‘s reports apply only t the spacifc samples tested under conditons. Itis menufacture‘ s responsibiity to ensure that addilonalproduction uts ofthis model are manufactured wth the Identical electrcal and mechanical components. Neutron shall have no labity for eny declarations , inferences or generalizations drewn by the clent or otners from Neutron issued reponts. Neutrons reports must not be used by the clentto laim product endorsement by the authorites or any agency ofthe Government. "This reportis the contidentiaprogerty ofthe clent. As a mutualprotection to the clients,the public and Neutron—self, extrects from the test report shall not be reproduced excaptiul with Neutron‘ s authorized writen approval. Neutron‘s leboratory quality assurance procedures are in complience with the IS0 Guide 17028 requirements, and acoredited by the conformity assessment authorites lsted in this tost report. Limitation For the use ofthe authorty‘slogo is Imited unless the Test Stendard(s)/Scopa(s)tem{s) mentioned in this test regort s (are) ncluded in the conformily assessment authorties acceptance respectve. Assessment Authorities Test Standard/Scopetem Acceptance [L& j FOO Pert 15 Subpart B NV uoadred iECoisrhee ASNzSaSis ons 1siae FCG Part 16 Subpart B CiSPR 22EN seoze ap Asnzsasie % VCOI Technical Requirement Prope P Ss iEcicispn 22 uds iEceN sto0042 iecren s1o00— 1666 IECEN s1000—3—3 IEOIEN 61000— IECEN 8100042 IEOIEN 61000— IECEN 8100043 IEOIEN 61000— iEcEN st00044 ans

NEUTRON EMC LAB. Report No.：NEI-FCC-P-03032 Table of Contents Page 1 General Information 5 1.1 Applicant 5 1.2 Manufacturer 5 1.3 Equipment Under Tested 5 1.4 OEM Brand/Model 5 1.5 Product Description 5 1.6 Connecting I/O Port(s) 5 1.7 Power Supplied 5 1.8 Products Covered 6 1.9 Model Difference (Series, Versions, if any) 6 1.10 EUT Modifications 6 1.11 Electric Block Diagram 6 1.12 Photos of EUT 6 2 RFI Emissions Measurement 7 2.1 Test Facility 7 2.2 Standard Compliance 7 2.3 Test Conditions and Channel 7 2.4 Test Methodology 7 2.5 Deviations from Standard Test Method 7 2.6 Sample(s) Tested 8 2.7 Measurement Instrument 8 2.8 Measurement Uncertainty 8 2.9 Tested System Set-Up/Configuration Details 8 Table -1 Equipments Used in Tested System 9 Diagram -1 Block diagram showing the configuration of system tested 10 Table - 2 Equipments Used in Tested System 11 Table - 3 Information of Interface Cable 11 2.10 Max.(Worst Case) RF Emission Evaluation 12 2.11 EUT Operation 12 3 Justification 13 3.1 Limitations 13 3.1.1 Power Line Conducted Emission 13 3.1.2 Radiated Emission Limits 13 3.2 Measurement Justification 14 3.2.1 Conducted Emission 14 3.2.2 Radiated Emission 14 3.2.3 Field Strength Calculation 15 3.3 Measurement Data 15 Table 4 Conducted Emission Data 15 Table 5 Radiated Emission Data 15 3/35

NEUTRON EMC LAB. Report No.：NEI-FCC-P-03032 Table of Contents Page Attachment 18 A. Electric Block Diagram 19 B. EUT Modification Description 20 C. EUT Test Photos 21 D. EUT Photos 23 E. User’s Manual 29 F. Product Labeling 30 G. Bandwidth Requirement 32 H. Laboratory Accreditation Certificate 35 4/35

NEUTRON EMC LAB. Report No.：NEI-FCC-P-03032 1. General Information 1.1 Applicant Name Chicony Electronics Co., Ltd. Address No. 25 Wu-Gong 6 Th Rd., Wu-Ku Industrial Park, Taipei Hsien, Taiwan, R.O.C. 1.2 Manufacturer Name N/A Address N/A 1.3 Equipment Under Tested Name: Wireless Keyboard Trade Name: Chicony Model No.: KR-0309 1.4 OEM Brand/Model (if applicable) OEM Brand(s)/Model(s) except the basic model in sub-clause 1.3 is(are) the follows: OEM Brand: N/A Model No.: N/A 1.5 Product Descriptions(Application/Features/Specification) The EUT is a Wireless Keyboard. A major technical descriptions of EUT is described as following: A. Operation Frequency CH1: 27.145 MHz and CH2: 27.195 MHz B. Modulation Type FSK C. Antenna Designation Integral D. Number Of Channel 2 E. Channel Spacing N/A F. Operation Methodology The EUT encoder generates a pulse code serially transmit (typical designation) into the modulator(or called as mixer) stage in circuit. This pulse signal mixed with the carrier at modulator(mixer) stage by way of FSK mode frequency modulation. The modulation depth is designed such as ± 5KHz in this application, that means the pulse(may be at high level state or low level state) will trigger the oscillator to generate a frequency at a specified fundamental frequency +5KHz or −5KHz, depended on the designation. For example, if the carrier frequency defined as fundamental frequency +5KHz at high level state, then the alternative carrier frequency will be fundamental frequency −5KHz at low level state. Based on the application, features, or specification exhibited in User's Manual, the EUT is considered as an ITE/Computing Device. More details of EUT technical specification, please refer to the User's Manual (Attachment - E.) 5/35

NEUTRON EMC LAB. Report No.：NEI-FCC-P-03032 1.6 Connecting I/O Port(s) Please refer to the User's Manual ( Attachment - E.) 1.7 Power Supplied Power Source: Battery supplied Power Cord: N/A Power Rating : DC 3 V, 50mA(Max) 1.8 Products Covered (if applicable) The sample tested including the following sub-system/module/accessory : Sub-system/ Module/ Accessory Model/Type No. Int. Inst./ Ext. Cont. Wireless Mouse MR-0350T Ext. Receiver RR-0350U Ext. 1.9 Model Difference (Series, Versions, if any) Except the basic model no. (model designation of the sample tested in this test report), additional model no. covered is(are) : N/A. 1.10 EUT Modifications (if applicable) No any modification required for the EUT to comply with the standards. 1.11 Electric Block Diagram Please refer to the Attachment – A. 1.12 Photos of EUT Please refer to the Attachment – D. 6/35

NEUTRON EMC LAB. Report No.：NEI-FCC-P-03032 2. RFI Emissions Measurement 2.1Test Facility The test facilities used to collect the test data in this report located at No.132-1, Lane 329, Sec. 2, Palain Road, Shijr City, Taipei, Taiwan. 2.2 Standard Compliance The test data contained in this report relate only to the item(s) listed below : FCC Part15, Subpart C / RSS-210: 2001/ ANCI C63.4 : 1992 The composite system (including receiver and transmitter) in compliance with Subpart B is authorized under a DOC procedure. 2.3 Test Conditions and Channel Test Channel (1) EUT Channel Test Frequency(MHz) 1 CH 1 27.145 2 CH2 27.195 Note: (1)The measurements are performed at the highest and lowest available channels with the modulation enabled. 2.4 Test Methodolog Only radiated testing was performed during the max. EMI emission evaluation. Conducted testing excepted because of the EUT is a battery operating device and no any other cable connection to PC device. Test procedures according to the technical standards: (Antenna to EUT distance is 3 m) FCC Part15 (15.227), Subpart C Frequency Range Section Test Item Limit Result (MHz) 15.209 Radiated Emission Class B 30-1000 PASS 15.227 Radiated Emission 10000 µV/m (80dBµV/m) @ 3 m 26.96-27.28 PASS 7/35

NEUTRON EMC LAB. Report No.：NEI-FCC-P-03032 2.5 Deviations from Standard Test Method N/A 2.6 Sample(s) Tested The representative sample tested in this reports is(are): KR-0309 Test results in this test report relate only to the sample(s) tested. The EUT has been tested according to the following environmental condition: Input Power DC: 3V Temperature 29 ℃ Relative Humidity 63 ％ 2.7 Measurement Instruments Valid measurement instruments used in this report refer to Table-1 enclosed. 2.8 Measurement Uncertainty Measurement Uncertainty for a Level of Confidence of 95 % , U=2xUc(y) Radiated Emission Measurement ± 2.47 dB Conducted Emission Measurement ± 2.29 dB 2.9 Tested System Set-Up/Configuration Details The system was configured for testing in a typical fashion (as a user would normally use) or in-accordance with the operating configuration specified in the user's manual. A Block Diagram(please refer to the Diagram - 1) and Photos(please refer to the attachment - C) showing the set-up/configuration of system tested. In addition, Table-2 and Table-3 provide a detail of all equipment items and cables information used in the system tested. 8/35

NEUTRON EMC LAB. Report No.：NEI-FCC-P-03032 Table -1 Measurement Instruments List Item Instruments Mfr/Brand Model/Type No. Serial No. Calibrated Date Next Cali. Date Note 1 LISN EMCO 3825/2 9605-2539 2003-06-10 2004-06-09 ü 2 LISN Rolf Heine NNB-2/16Z 98083 2002-11-01 2003-10-31 ü 3 LISN Rolf Heine NNB-2/16Z 98053 2002-11-15 2003-11-14 4 Pulse Limiter Electro-Metrics EM-7600 112644 2002-12-09 2003-12-08 ü 5 50Ω Terminator N/A N/A N/A 2003-05-09 2004-05-08 ü 6 Test Cable N/A C01 N/A 2002-12-10 2003-12-09 ü 7 Log-Bicon Antenna MESS-ELEKTRONIK VULB 9160 3058 2002-10-23 2003-10-22 ü 8 Log-Bicon Antenna MESS-ELEKTRONIK VULB 9160 3060 2002-10-23 2003-10-22 9 Log-Bicon Antenna MESS-ELEKTRONIK VULB 9161 4022 2003-07-14 2004-07-13 10 Test Cable N/A 10M_OS01 N/A 2002-12-10 2003-12-09 ü 11 Test Cable N/A OS01-1/-2 N/A 2002-12-10 2003-12-09 ü 12 Test Cable N/A 10M_OS02 N/A 2002-12-10 2003-12-09 13 Test Cable N/A OS02-1/-2/-3 N/A 2002-12-10 2003-12-09 14 RF Switch Anritsu MP59B M65982 2001-12-09 2003-12-08 ü 15 Quasi-Peak Adapter HP 85650A 2521A00844 2003-04-21 2003-10-20 16 RF Pre-Selector HP 85685A 2648A00417 2003-04-21 2003-10-20 17 Spectrum Analyzer HP 85680B 2634A03025 2003-04-21 2003-10-20 18 Spectrum Monitor HP 85662B 2648A13616 2003-04-21 2003-10-20 19 Pre-Amplifier Anritsu MH648A M09961 2002-12-09 2003-12-08 ü 20 Spectrum Analyzer ADVAN TEST R3261C 81720298 2003-08-13 2004-08-12 ü 21 Test Receiver R&S ESH3 860156/018 2002-10-22 2003-10-21 22 Test Receiver R&S ESVP 860687/009 2002-12-06 2003-12-05 ü 23 Test Receiver MEB SMV41 130 2002-12-06 2003-12-05 ü 24 Test Receiver PMM PMM 9000 4310J01002 2002-10-06 2003-10-03 25 Horn Antenna EMCO 3115 9605-4803 2003-05-23 2004-05-22 26 Test Receiver R&S ESMI 843977/005 2003-01-13 2004-01-12 1045.5020.9801 27 Pre-Amplifier R&S ESMI-Z7 2003-05-19 2004-05-18 (612.278 041 00) 28 Absorbing Clamp R&S MDS-21 841077/011 2003-08-14 2004-08-13 29 Voltage Probe R&S ESH2-Z3 841.800/023 2003-08-26 2004-08-25 30 Signal Generator HP 8648A 3426A01034 2002-10-11 2004-10-08 31 Antenna Mast Chance Most CMTB-1.5 N/A N/A N/A ü 32 Turn Table Chance Most CMTB-1.5 N/A N/A N/A ü Remark : (1)” ü” indicates the instrument used in Test Report. (2)” N/A” denotes No Model No. / Serial No. and No Calibration specified. 9/35

NEUTRON EMC LAB. Report No.：NEI-FCC-P-03032 Diagram - 1 Block diagram showing the configuration of system tested E-1 EUT(Tx) 10/35

NEUTRON EMC LAB. Report No.：NEI-FCC-P-03032 Table - 2 Equipments Used in Tested System Item Equipment Mfr/Brand Model/Type No. FCC ID Series No. Note E-1 Wireless Keyboard Chicony KR-0309 E8HKR-0309 N/A EUT Note: (1) Unless otherwise denoted as EUT in『Remark』column , device(s) used in tested system is a support equipment. (2) Unless otherwise marked as ※ in『Remark』column, Neutron consigns the support equip- ment to the tested system. (3) The support equipment was authorized by Declaration of Confirmation. Table - 3 Information of Interface Cable Item Shielded Type Ferrite Core Length Note N/A N/A N/A Note: (1) Unless otherwise marked as ※ in『Remark』column, Neutron consigns the support equip- ment to the tested system. (2) For detachable type I/O cable should be specified the length in cm in『Length』column. 11/35

NEUTRON EMC LAB. Report No.：NEI-FCC-P-03032 2.10 Max.(Worst Case) RF Emission Evaluation (a) Only radiated testing was performed during the max. EMI emission evaluation. Conducted testing excepted because of the EUT is a battery operating device and no any other cable connection to PC device. (b) The EUT was configured for testing in a typical fashion (as a customer would normally use it). The EUT has been programmed to continuously transmit during test. This operating condition was tested and used to collect the included data. 2.11 EUT Operation The EUT exercise program used during radiated and emission measurement was designed to exercise the various system components in a manner similar to a typical use. 12/35

NEUTRON EMC LAB. Report No.：NEI-FCC-P-03032 3. Justification 3.1 Limitations 3.1.1 Power Line Conducted Emission Measurement Mains Terminal Mains Terminals Note Frequency Class A Limits Class B Limits CISPR Range (dBuV) (dBuV) FCC (MHz) QP Mode AV Mode QP Mode AV Mode Std. 0.15 - 0.50 79.00 66.00 66 - 56 * 56 - 46 * CISPR 0.50 - 5.00 73.00 60.00 56.00 46.00 CISPR 5.00 - 30.0 73.00 60.00 60.00 50.00 CISPR 0.45-1.705 60.00 N/A 48.00 N/A FCC 1.705-30.0 69.50 N/A 48.00 N/A FCC Notes: (1). The tighter limit applies at the band edges. (2). The limit of " * " marked band means the limitation decreases linearly with the logarithm of the frequency in the range. 3.1.2 Radiated Emission Limits (Frequency Range 30MHz-1000MHz) Measurement Quasi-Peak Mode Quasi-Peak Mode Note Frequency Class A Limits Class B Limits CISPR Range (dBuV/m) (dBuV/m) FCC (MHz) 10m 30m 10m 3m Std. 30.00 -230.00 40.00 30.00 30.00 40.00 CISPR 230.0 -1000.0 47.00 37.00 37.00 47.00 CISPR 30.00 - 88.00 39.00 N/A 30.00 40.00 FCC 88.00 - 216.0 43.50 N/A 33.50 43.50 FCC 216.0 -960.0 46.00 N/A 36.00 46.00 FCC above 960.0 49.50 N/A 46.00 54.00 FCC Notes: (1). The tighter limit applies at the band edges. (2). Emission level (dBuV/m)=20log Emission level (uV/m). (3). A measuring distance 0f 10m is a primary used. However, either 3m or 10m (instead of 10m) distance my be allowed. If the distance is 3m, add 10dB to the QP-limit above. If the distance is 10m, subtract 10dB from the QP-limit above. 13/35

NEUTRON EMC LAB. Report No.：NEI-FCC-P-03032 3.2 Measurement Justification 3.2.1 Conducted Emission The EUT is a placed on as table which is 0.8 m above ground plane. According to the requirements in Section 13.1.4.1 of ANSI C63.4-1992. Conducted emissions from the EUT measured in the frequency range between 0.15 MHz and 30MHz were made with a Spectrum Analyzer using CISPR Quasi-Peak detector mode. The initial step in collecting conducted emission data is a spectrum analyzer peak detector mode pre-scanning the measurement frequency range. Significant peaks are then marked and these signals are then Quasi Peak detector mode and/or Average detector mode re-measured. Data of Table - 4. lists the significant emission frequencies, measured levels, limits and safe margins. All readings are Peak Mode measured unless otherwise stated as QP or AV in column of " Remark ". If the Peak Mode measured value lower than both QP Mode and AV Mode Limit, EUT shall be deemed to compliance with both QP & AV Limits and then no additional QP Mode or AV Mode measurement performed. If additional QP or AV Mode measurement needed, and if the QP Mode measured value compliance with the QP Mode Limit and lower than AV Mode Limit, the EUT shall be deemed to meet both QP & AV Limits and then only QP Mode was measured, but AV Mode was not performed。 3.2.2 Radiated Emission The EUT is a placed on as turn table which is 0.8 m above ground plane. The turn table shall rotate 360 degrees to determine the position of maximum emission level. EUT is set 3m away from the receiving antenna which varied from 1m to 4m to find out the highest emission. And also, each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. In order to find out the max. emission, the relative positions of this hand-held transmitter(EUT) was rotated through three orthogonal axes according to the requirements in Section 13.1.4.1 of ANSI C63.4-1992. The initial step in collecting conducted emission data is a spectrum analyzer peak detector mode pre-scanning the measurement frequency range. Significant peaks are then marked and then Quasi Peak, Peak or Average detector mode re-measured. Data of Table – 5 lists the significant emission frequencies, measured levels, limits and safe margins. All readings are Peak Mode measured unless otherwise stated as QP or AV in column of " Remark ". If the Peak Mode measured value compliance with and lower than Quasi Peak or Average Mode Limit, the EUT shall be deemed to meet QP/AV Limits and then no additional QP/AV Mode measurement performed. 14/35

NEUTRON EMC LAB. Report No.：NEI-FCC-P-03032 3.2.3 Field Strength Calculation The field strength is calculated by adding the Antenna Factor and Cable Factor and subtracting the Amplifier Gain (if any) from the measured reading. The basic equation with a sample calculation is as FS = RA + AF + CL - AG Where FS = Field Strength RA = Receiver Amplitude AF = Antenna Factor (1) CL = Cable Attenuation Factor(Cable Loss) (1) AG = Amplifier Gain (1) Remark : (1) The Correction Factor = AF + CL - AG, as shown in the data tables' Correction Factor column. 3.3 Measurement Data Table - 4. Conducted Emission Data (015-30MHz) – Not Applicable Table - 5. Radiated Emission Data (30-1000MHz) 15/35

[ weurhow eme Las. Report No. : NELFCG—P—03032 (4) Radiated Emizsion Test Set—Up, Frequency Below 1000MEz Fsith lnctalin Spectrum \ B Analyzer Ground Plane Coatil Cable (E) Radiated Emission Test Set—UP Frequency Over 1 GHz Turntable \ E01 . Test 08 m| Im o 4m |:| Receiver Ground Plane Coaxial Cable mss

NEUTRON EMC LAB. Report No.：NEI-FCC-P-03032 Table 5 Radiated Emission Data (30-1000MHz) Special Notes：(EUT Operation Mode or Test Configuration Mode, if applicable) CH1 Freq. Ant.Pol. DetectorMode Reading Ant./CL/ Actual FS Limit3m Safe Margin Note (MHz) H/V (PK/AV) (dBuV) Amp. CF(dB) (dBuV/m) (dBuV/m) (dB) 27.145 V Peak 68.70 -15.49 53.21 80.00 -26.79 F 26.960 V Peak 32.60 -15.53 17.07 69.50 -52.43 E 27.280 V Peak 20.60 -15.46 5.14 69.50 -64.36 E 54.290 V Peak 28.90 -13.05 15.85 40.00 -24.15 H 81.435 V Peak 31.10 -15.93 15.17 40.00 -24.83 H 108.580 V Peak 34.90 -13.57 21.33 43.50 -22.17 H 135.725 V Peak 33.10 -10.68 22.42 43.50 -21.08 H 162.870 V Peak 32.40 -10.18 22.22 43.50 -21.28 H 27.145 H Peak 71.10 -15.49 55.61 80.00 -24.39 F 26.960 H Peak 35.70 -15.53 20.17 69.50 -49.33 E 27.280 H Peak 37.80 -15.46 22.34 69.50 -47.16 E 54.290 H Peak 36.20 -13.05 23.15 40.00 -16.85 H 81.435 H Peak 38.60 -15.93 22.67 40.00 -17.33 H 108.580 H Peak 39.30 -13.57 25.73 43.50 -17.77 H 135.725 H Peak 37.80 -10.68 27.12 43.50 -16.38 H 162.870 H Peak 32.70 -10.18 22.52 43.50 -20.98 H Remark： (1) Spectrum Setting : 30MHz – 1000MHz , RBW= 100KHz, VBW=100KHz, Sweep time = 200 ms. 1GHz- 25GHz, RBW= 1MHz, VBW= 1MHz, Sweep time = 200 ms (2) All readings are Peak unless otherwise stated QP in column of『Note』. Peak denotes that the Peak reading compliance with the QP Limits and then QP Mode measurement didn‘t perform。 (3) Measuring frequency range from 25MHz to 1000MHz or the 10th harmonic of highest fundamental frequency。“F” denotes fundamental frequency; “ H” denotes spurious frequency. “E” denotes band edge frequency. (4) Radiated emissions measured in frequency range from 30 MHz to 1000 MHz were made with an instrument using Peak detector mode or QP detector mode of the emission 。 (5) Data of measurement within this frequency range shown “ - ” in the table above means the reading of emissions are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. 17/35

NEUTRON EMC LAB. Report No.：NEI-FCC-P-03032 Table 5 Radiated Emission Data (30-1000MHz) Special Notes：(EUT Operation Mode or Test Configuration Mode, if applicable) CH2 Freq. Ant.Pol. DetectorMode Reading Ant./CL/ Actual FS Limit3m Safe Margin Note (MHz) H/V (PK/AV) (dBuV) Amp. CF(dB) (dBuV/m) (dBuV/m) (dB) 27.195 V Peak 67.90 -15.48 52.42 80.00 -27.58 F 26.960 V Peak 22.70 -15.53 7.17 69.50 -62.33 E 27.280 V Peak 39.60 -15.46 24.14 69.50 -45.36 E 54.390 V Peak 31.90 -13.05 18.85 40.00 -21.15 H 81.585 V Peak 32.60 -15.91 16.69 40.00 -23.31 H 108.780 V Peak 33.90 -13.56 20.34 43.50 -23.16 H 135.975 V Peak 31.00 -10.65 20.35 43.50 -23.15 H 163.170 V Peak 31.40 -10.21 21.19 43.50 -22.31 H 27.195 H Peak 73.30 -15.48 57.82 80.00 -22.18 F 26.960 H Peak 33.80 -15.53 18.27 69.50 -51.23 E 27.280 H Peak 44.60 -15.46 29.14 69.50 -40.36 E 54.390 H Peak 37.30 -13.05 24.25 40.00 -15.75 H 81.585 H Peak 37.00 -15.91 21.09 40.00 -18.91 H 108.780 H Peak 37.10 -13.56 23.54 43.50 -19.96 H 135.975 H Peak 36.20 -10.65 25.55 43.50 -17.95 H 163.170 H Peak 34.00 -10.21 23.79 43.50 -19.71 H Remark： (1) Spectrum Setting : 30MHz – 1000MHz , RBW= 100KHz, VBW=100KHz, Sweep time = 200 ms. 1GHz- 25GHz, RBW= 1MHz, VBW= 1MHz, Sweep time = 200 ms (2) All readings are Peak unless otherwise stated QP in column of『Note』. Peak denotes that the Peak reading compliance with the QP Limits and then QP Mode measurement didn‘t perform。 (3) Measuring frequency range from 25MHz to 1000MHz or the 10th harmonic of highest fundamental frequency。“F” denotes fundamental frequency; “ H” denotes spurious frequency. “E” denotes band edge frequency. (4) Radiated emissions measured in frequency range from 30 MHz to 1000 MHz were made with an instrument using Peak detector mode or QP detector mode of the emission 。 (5) Data of measurement within this frequency range shown “ - ” in the table above means the reading of emissions are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. 18/35

NEUTRON EMC LAB. Report No.：NEI-FCC-P-03032 Attachment Table Contents A. Electric Block Diagram B. EUT Modification Description C. EUT Photos D. EUT Test Photos E. User’s Manual F. Product Labeling G. Bandwidth Requirement (Plot) H. Laboratory Accreditation Certificate 19/35

NEUTRON EMC LAB. Report No.：NEI-FCC-P-03032 Attachment - A. Electric Block Diagram 20/35

NEUTRON EMC LAB. Report No.：NEI-FCC-P-03032 Attachment - B. EUT Modification Description 21/35

NEUTRON EMC LAB. Report No.：NEI-FCC-P-03032 Attachment - C. EUT Test Photos 22/35

NEUTRON EMC LAB. Report No.：NEI-FCC-P-03032 Attachment – D EUT Photos 1. Photo # 1 Front View/ Rear View 2. Photo # 2~5 Unit Partially Disassembled 24/35

NEUTRON EMC LAB. Report No.：NEI-FCC-P-03032 Attachment – E User’s Manual 29/35

NEUTRON EMC LAB. Report No.：NEI-FCC-P-03032 Attachment - F Product Labeling 30/35

NEUTRON EMC LAB. Report No.：NEI-FCC-P-03032 Attachment - G. Bandwidth Requirement 32/35

NEUTRON EMC LAB. Report No.：NEI-FCC-P-03032 Attachment - H. Laboratory Accreditation Certificate 35/35


Document Created: 2003-10-04 11:12:34
Document Modified: 2003-10-04 11:12:34
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC