Test report

FCC ID: E8HAS2001

Test Report

Download: PDF
FCCID_4292407

FCC Test Report Report No.: RF190402D14 FCC ID: E8HAS2001 Test Model: AS2001 Received Date: Mar. 21, 2019 Test Date: Mar. 21, 2019 Issued Date: Apr. 10, 2019 Applicant: Chicony Electronics Co., Ltd. Address: No.69, Sec. 2, Guangfu Rd., Sanchong Dist., New Taipei City 241, Taiwan(R.O.C.) Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. FCC Registration / Designation Number: 198487 / TW2021 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF190402D14 Page No. 1 / 21 Report Format Version: 6.1.1

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity...................................................................................................................... 4 2 Summary of Test Results ..................................................................................................................... 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Modification Record ............................................................................................................................ 5 3 General Information .............................................................................................................................. 6 3.1 General Description of EUT ................................................................................................................ 6 3.2 Description of Test Modes ................................................................................................................... 6 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................. 7 3.3 Description of Support Units ............................................................................................................... 8 3.3.1 Configuration of System under Test .................................................................................................... 8 3.4 General Description of Applied Standards .......................................................................................... 8 4 Test Types and Results ........................................................................................................................ 9 4.1 Radiated Emission and Bandedge Measurement............................................................................... 9 4.1.1 Limits of Radiated Emission and Bandedge Measurement ................................................................ 9 4.1.2 Test Instruments ................................................................................................................................ 10 4.1.3 Test Procedures.................................................................................................................................. 11 4.1.4 Deviation from Test Standard ............................................................................................................. 11 4.1.5 Test Set Up ........................................................................................................................................ 12 4.1.6 EUT Operating Conditions................................................................................................................. 12 4.1.7 Test Results ....................................................................................................................................... 13 4.2 Channel Bandwidth ........................................................................................................................... 18 4.2.1 Test SetUp ......................................................................................................................................... 18 4.2.2 Test Instruments ................................................................................................................................ 18 4.2.3 Test Procedure .................................................................................................................................. 18 4.2.4 Deviation from Test Standard ............................................................................................................ 18 4.2.5 EUT Operating Conditions................................................................................................................. 18 4.2.6 Test Results ....................................................................................................................................... 19 5 Pictures of Test Arrangements .......................................................................................................... 20 Appendix – Information of the Testing Laboratories ................................................................................. 21 Report No.: RF190402D14 Page No. 2 / 21 Report Format Version: 6.1.1

Release Control Record Issue No. Description Date Issued RF190402D14 Original release Apr. 10, 2019 Report No.: RF190402D14 Page No. 3 / 21 Report Format Version: 6.1.1

1 Certificate of Conformity Product: Active Stylus Brand: DELL Test Model: AS2001 Sample Status: Engineering sample Applicant: Chicony Electronics Co., Ltd. Test Date: Mar. 21, 2019 Standards: 47 CFR FCC Part 15, Subpart C (Section 15.209) ANSI C63.10: 2013 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date: Apr. 10, 2019 Jessica Cheng / Senior Specialist Approved by : , Date: Apr. 10, 2019 Rex Lai / Associate Technical Manager Report No.: RF190402D14 Page No. 4 / 21 Report Format Version: 6.1.1

2 Summary of Test Results 47 CFR FCC Part 15, Subpart C (Section 15.209) FCC Test Item Result Remarks Clause 15.207 AC Power Conducted Emission N/A Power supply is 1.5Vdc from battery 15.215 Channel Bandwidth Measurement Meet the requirement of limit. 15.209 Radiated Emission Test Pass Minimum passing margin is -16.12 dB at 50.758 MHz Note: Determining compliance based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: Expanded Uncertainty Measurement Frequency (k=2) (±) 9kHz ~ 30MHz 2.38 dB Radiated Emissions up to 1 GHz 30MHz ~ 1000MHz 5.54 dB 2.2 Modification Record There were no modifications required for compliance. Report No.: RF190402D14 Page No. 5 / 21 Report Format Version: 6.1.1

3 General Information 3.1 General Description of EUT Product Active Stylus Brand DELL Test Model AS2001 Sample Status Engineering sample Power Supply Rating 1.5Vdc from AAAA battery Modulation Type ASK Operating Frequency 18kHz ~ 44kHz Antenna Type Loop antenna Field Strength 49.75dBuV/m Accessory Device N/A Data Cable Supplied N/A Note: 1. The EUT is an Active Stylus. 2. The above EUT information is declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or user's manual. 3.2 Description of Test Modes The following test frequency is provided to this EUT. Operating Frequency (kHz) Tested Frequency (kHz) 18-44 25 Report No.: RF190402D14 Page No. 6 / 21 Report Format Version: 6.1.1

3.2.1 Test Mode Applicability and Tested Channel Detail EUT Configure Applicable To Description Mode RE<1G PLC CBW - √ Note 1 √ - Where RE<1G: Radiated Emission below 1GHz PLC: Power Line Conducted Emission CBW: Channel Bandwidth NOTE: 1. No need to concern of Conducted Emission due to the EUT is powered by battery. 2. The EUT had been pre-tested on the positioned of each 2 axis (X.Z). The worst case was found when positioned on Z-plane. Radiated Emission Test (Below 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Configure Mode Operating Frequency (kHz) Tested Frequency (kHz) Modulation Type - 18-44 25 ASK Channel Bandwidth Test: Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Configure Mode Operating Frequency (kHz) Tested Frequency (kHz) Modulation Type - 18-44 25 ASK Test Condition: Applicable To Environmental Conditions Input Power Tested by RE<1G 25 deg. C, 76% RH 1.5Vdc Ian Chang CBW 25 deg. C, 76% RH 1.5Vdc Saxon Lee Report No.: RF190402D14 Page No. 7 / 21 Report Format Version: 6.1.1

3.3 Description of Support Units The EUT has been tested as an independent unit without any necessary accessories or support units. 3.3.1 Configuration of System under Test EUT (Powered from battery) 3.4 General Description of Applied Standards The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C (15.209) ANSI C63.10-2013 All test items have been performed and recorded as per the above standards. Report No.: RF190402D14 Page No. 8 / 21 Report Format Version: 6.1.1

4 Test Types and Results 4.1 Radiated Emission and Bandedge Measurement 4.1.1 Limits of Radiated Emission and Bandedge Measurement For Frequency Below 30MHz Frequency Field Strength (dBuV/m) Measurement Distance (MHz) uV/m dBuV/m (meters) 0.009 – 0.490 2400 / F (kHz) 48.52-13.80 300 0.490 – 1.705 24000 / F (kHz) 33.80-22.97 30 1.705 – 30.0 30 29.54 30 For Frequency Between 30-1000MHz Frequency Class A (at 10m) Class B (at 3m) (MHz) uV/m dBuV/m uV/m dBuV/m 30-88 90 39.1 100 40.0 88-216 150 43.5 150 43.5 216-960 210 46.4 200 46.0 Above 960 300 49.5 500 54.0 Report No.: RF190402D14 Page No. 9 / 21 Report Format Version: 6.1.1

4.1.2 Test Instruments DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL HP Preamplifier 8447D 2432A03504 Feb. 20, 2019 Feb. 19, 2020 HP Preamplifier 8449B 3008A01201 Feb. 21, 2019 Feb. 20, 2020 MITEQ Preamplifier AMF-6F-260400-33-8P 892164 Feb. 20, 2019 Feb. 19, 2020 Agilent N9038A MY51210129 Mar. 05, 2019 Mar. 04, 2020 TEST RECEIVER Schwarzbeck Antenna VULB 9168 139 Nov. 26, 2018 Nov. 25, 2019 Schwarzbeck Antenna VHBA 9123 480 May 19, 2017 May 18, 2019 Schwarzbeck Horn BBHA-9170 212 Nov. 25, 2018 Nov. 24, 2019 Antenna Schwarzbeck Horn BBHA 9120-D1 D130 Nov. 25, 2018 Nov. 24, 2019 Antenna ADT. Turn Table TT100 0306 NA NA ADT. Tower AT100 0306 NA NA Software Radiated_V7.6.15.9.5 NA NA NA SUHNER RF cable SF102 Cable-CH6-01 Aug. 13, 2018 Aug. 12, 2019 With 4dB PAD SUHNER RF cable SF102 Cable-CH8-3.6m Aug. 13, 2018 Aug. 12, 2019 With 3/4dB PAD KEYSIGHT MIMO Powermeasurement Test U2021XA U2021XA-001 Jun. 4, 2018 Jun. 3, 2019 set KEYSIGHT N9030A MY54490260 Aug. 3, 2018 Aug. 2, 2019 Spectrum Analyzer Loop Antenna EMCI LPA600 270 Aug. 11, 2017 Aug. 10, 2019 EMCO Horn Antenna 3115 00028257 Nov. 25, 2018 Nov. 24, 2019 Highpass filter WHK 3.1/18G-10SS SN 8 NA NA Wainwright Instruments ROHDE & SCHWARZ FSV40 101042 Sep. 27, 2018 Sep. 26, 2019 Spectrum Analyzer NOTE: 1. The calibration interval of the above test instruments is 12/24 months. And the calibrations are traceable to NML/ROC and NIST/USA. 2. The horn antenna and HP preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 3. The test was performed in Chamber No. 6. Report No.: RF190402D14 Page No. 10 / 21 Report Format Version: 6.1.1

4.1.3 Test Procedures For Radiated emission below 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter chamber room. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. Parallel, perpendicular, and ground-parallel orientations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Quasi-Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 9kHz at frequency below 30MHz. For Radiated emission above 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters (for below 1GHz) / 1.5 meters (for above 1GHz) above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is ≥ 1/T (Duty cycle < 98%) or 10Hz (Duty cycle ≥ 98%) for Average detection (AV) at frequency above 1GHz. 4. All modes of operation were investigated and the worst-case emissions are reported. 4.1.4 Deviation from Test Standard No deviation. Report No.: RF190402D14 Page No. 11 / 21 Report Format Version: 6.1.1

4.1.5 Test Set Up For Radiated emission below 30MHz EUT& 3m Loop antenna Support Units Turn Table 80cm Ground Plane Test Receiver For Radiated emission 30MHz to 1GHz Ant. Tower 1-4m Variable EUT& 3m 10m Support Units Turn Table 80cm Ground Plane Test Receiver For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT Operating Conditions Set the EUT under transmission condition continuously at specific channel frequency. Report No.: RF190402D14 Page No. 12 / 21 Report Format Version: 6.1.1

4.1.7 Test Results Below 30MHz Data: Test Frequency 25kHz Detector Function Quasi-Peak Frequency Range 9 kHz ~ 30 MHz Antenna Polarity & Test Distance: Loop Antenna Parallel At 3m Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *0.025 49.75 QP 119.65 -69.90 1.00 183 15.41 34.34 2 0.050 43.06 QP 113.63 -70.57 1.00 316 15.52 27.54 3 0.453 31.77 QP 94.48 -62.71 1.00 284 21.99 9.78 4 0.931 28.25 QP 68.23 -39.98 1.00 128 22.91 5.34 5 2.065 24.82 QP 69.54 -44.72 1.00 176 22.02 2.80 6 6.394 23.46 QP 69.54 -46.08 1.00 312 21.85 1.61 7 7.707 23.98 QP 69.54 -45.56 1.00 240 22.44 1.54 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. “ * “: Fundamental frequency. 6. Loop antenna was used for all radiated emission below 30MHz. 7. Limit @3m=Limit@300m+40log(300 / 3)=Limit@300m+80 8. Limit @3m=Limit@30m+40log(30 / 3)=Limit@30m+40 Report No.: RF190402D14 Page No. 13 / 21 Report Format Version: 6.1.1

Test Frequency 25kHz Detector Function Quasi-Peak Frequency Range 9 kHz ~ 30 MHz Antenna Polarity & Test Distance: Loop Antenna Perpendicular At 3m Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *0.025 46.82 QP 119.65 -72.83 1.00 0 12.48 34.34 2 0.050 39.65 QP 113.63 -73.98 1.00 129 12.11 27.54 3 0.811 29.07 QP 69.42 -40.35 1.00 53 22.86 6.21 4 1.741 25.85 QP 69.54 -43.69 1.00 98 22.39 3.46 5 5.760 23.99 QP 69.54 -45.55 1.00 118 22.40 1.59 6 9.538 23.38 QP 69.54 -46.16 1.00 302 22.13 1.25 7 13.047 25.75 QP 69.54 -43.79 1.00 360 24.51 1.24 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. “ * “: Fundamental frequency. 6. Loop antenna was used for all radiated emission below 30MHz. 7. Limit @3m=Limit@300m+40log(300 / 3)=Limit@300m+80 8. Limit @3m=Limit@30m+40log(30 / 3)=Limit@30m+40 Report No.: RF190402D14 Page No. 14 / 21 Report Format Version: 6.1.1

Test Frequency 25kHz Detector Function Quasi-Peak Frequency Range 9 kHz ~ 30 MHz Antenna Polarity & Test Distance: Loop Antenna Ground-parallel At 3m Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *0.025 49.07 QP 119.65 -70.58 1.00 277 14.73 34.34 2 0.050 41.65 QP 113.63 -71.98 1.00 161 14.11 27.54 3 0.481 36.59 QP 93.96 -57.37 1.00 119 27.17 9.42 4 0.691 31.55 QP 70.81 -39.26 1.00 94 24.37 7.18 5 5.220 25.81 QP 69.54 -43.73 1.00 150 24.20 1.61 6 8.699 26.06 QP 69.54 -43.48 1.00 179 24.72 1.34 7 12.208 24.58 QP 69.54 -44.96 1.00 206 23.42 1.16 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. “ * “: Fundamental frequency. 6. Loop antenna was used for all radiated emission below 30MHz. 7. Limit @3m=Limit@300m+40log(300 / 3)=Limit@300m+80 8. Limit @3m=Limit@30m+40log(30 / 3)=Limit@30m+40 Report No.: RF190402D14 Page No. 15 / 21 Report Format Version: 6.1.1

Below 1GHz Data: Test Frequency 25kHz Detector Function Quasi-Peak Frequency Range 30 MHz ~ 1GHz Antenna Polarity & Test Distance: Horizontal At 3m Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 33.007 22.03 QP 40.00 -17.97 1.96 H 193 30.80 -8.77 2 109.103 23.13 QP 43.50 -20.37 1.82 H 272 33.21 -10.08 3 150.086 21.28 QP 43.50 -22.22 1.74 H 358 28.13 -6.85 4 244.661 20.99 QP 46.00 -25.01 1.85 H 198 28.14 -7.15 5 310.136 22.06 QP 46.00 -23.94 1.26 H 129 26.80 -4.74 6 358.636 23.48 QP 46.00 -22.52 1.43 H 360 27.54 -4.06 7 412.423 24.30 QP 46.00 -21.70 1.25 H 198 27.39 -3.09 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value Report No.: RF190402D14 Page No. 16 / 21 Report Format Version: 6.1.1

Test Frequency 25kHz Detector Function Quasi-Peak Frequency Range 30 MHz ~ 1GHz Antenna Polarity & Test Distance: Vertical At 3m Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 50.758 23.88 QP 40.00 -16.12 1.34 V 123 31.02 -7.14 2 100.276 23.40 QP 43.50 -20.10 1.25 V 172 34.64 -11.24 3 137.815 20.89 QP 43.50 -22.61 1.08 V 276 28.28 -7.39 4 256.786 20.89 QP 46.00 -25.11 1.21 V 135 27.61 -6.72 5 342.486 23.52 QP 46.00 -22.48 1.11 V 351 27.88 -4.36 6 390.791 24.23 QP 46.00 -21.77 1.10 V 341 27.63 -3.40 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value Report No.: RF190402D14 Page No. 17 / 21 Report Format Version: 6.1.1

4.2 Channel Bandwidth 4.2.1 Test SetUp EUT& 3m Loop antenna Support Units Turn Table 80cm Ground Plane Test Receiver 4.2.2 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.2.3 Test Procedure a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter Semi-anechoic chamber room. The table was rotated 360 degrees to determine the position of the highest radiation. Then the Loop antenna was rotated 360 degrees to determine the position of the highest radiation. b. The antenna is a broadband loop antenna, which is fixed of a 1m height above the ground, and set away from 3m to the EUT to find the disturbance reading on each frequency. c. The test-receiver system was set to Quasi-peak detect function and specified bandwidth. 4.2.4 Deviation from Test Standard No deviation. 4.2.5 EUT Operating Conditions The software provided by client to enable the EUT under transmission condition continuously. Report No.: RF190402D14 Page No. 18 / 21 Report Format Version: 6.1.1

4.2.6 Test Results Frequency (kHz) 20dB Bandwidth (kHz) 25 0.784 Spectrum Plot Of Worst Value Report No.: RF190402D14 Page No. 19 / 21 Report Format Version: 6.1.1

5 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: RF190402D14 Page No. 20 / 21 Report Format Version: 6.1.1

Appendix – Information of the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are FCC recognized accredited test firms and accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Lin Kou EMC/RF Lab Hsin Chu EMC/RF/Telecom Lab Tel: 886-2-26052180 Tel: 886-3-6668565 Fax: 886-2-26051924 Fax: 886-3-6668323 Hwa Ya EMC/RF/Safety Lab Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. --- END --- Report No.: RF190402D14 Page No. 21 / 21 Report Format Version: 6.1.1


Document Created: 2019-05-24 17:08:38
Document Modified: 2019-05-24 17:08:38
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC