Test Report

FCC ID: E4EG8D-444H-A

Test Report

Download: PDF
FCCID_126151

EMISSION TEST REPORT : Test Report No. :) 19L0021—02 Applicant: OMRON Corporation Type of Equipment: Keyless Entry System (Transmitter) Model No.: G8D—444H—A Test standard: FCC Part 15 Subpart C Test Result: Complies This report may not be reproduced in full, partial reproduction may only be made with the written consent of the laboratory. The results in this report apply only to the sample tested. Date of test: December 9, 1999 Tested by: QE@M Hiroka Umeyama Approved by; Issued date:Uecember December 14, 1999 Kazutoyo Nakanishi Revised date; November 20, 2000 Group Leader of EMC section Testing Laboratory A—pex International Co., Ltd: Téelephone: .—+81 596 391485 108 Yokowa—cho; Ise—<hi "Mie—ken 5161106 IAPAN Facsimile; +814 596 39 0232

Test report FCC ID : E4EG8D-444H-A Our reference : 19L0021-02 Page : 2 of 13 Issued date : 99-12-14 Revised date : 00-11-20 Table of Contents Page 1 GENERAL INFORMATION 3 1.1 Tested Methodology 4 1.2 Test Facility 4 2 PRODUCT DESCRIPTION 5 3 TESTED SYSTEM DETAILS 5 4 SYSTEM TEST CONFIGURATION 6 4.1 Justification 6 4.2 Test Procedure 6 Figure 4.2 Configuration of Tested System 7 5 RADIATED MEASUREMENT PHOTOS 8 Figure 5.1 Radiated Measurement Photos 8 5.1 Measurement Uncertainty 9 6 RADIATED EMISSION DATA 10 6.1 Field Strength Calculation 11 7 TEST EQUIPMENT USED 12 APPENDIX 13 Test Data A1 - A3 Testing Laboratory A-pex International Co., Ltd. Telephone: +81 596 39 1485 108 Yokowa-cho, Ise-shi Mie-ken 516-1106 JAPAN Facsimile: +81 596 39 0232

Test report FCC ID : E4EG8D-444H-A Our reference : 19L0021-02 Page : 3 of 13 Issued date : 99-12-14 Revised date : 00-11-20 1 GENERAL INFORMATION APPLICANT : OMRON Corporation ADDRESS : 1-501, Yashirogaoka, Meito-ku, Nagoya-city Aichi, 465-0051 Japan Tel: +81-52-704-2525 Fax: +81-52-704-2769 REGULATION(S) : FCC Part 15 Subpart C MODEL NUMBER : G8D-444H-A SERIAL NUMBER :- KIND OF EQUIPMENT : Keyless Entry System (Transmitter) TESTED DATE : December 9, 1999 RECEIPT DATE OF SAMPLE : December 2, 1999 REPORT FILE NUMBER : 19L0021-02 TEST SITE : A-PEX Yokowa NO.3 Open Test Site Testing Laboratory A-pex International Co., Ltd. Telephone: +81 596 39 1485 108 Yokowa-cho, Ise-shi Mie-ken 516-1106 JAPAN Facsimile: +81 596 39 0232

Test report FCC ID : E4EG8D-444H-A Our reference : 19L0021-02 Page : 4 of 13 Issued date : 99-12-14 Revised date : 00-11-20 1.1 Tested Methodology Radiated testing were performed according to the procedures in FCC/ANSI C63.4(1992). Radiated testing was performed at a distance of 3 meters from the antenna to EUT . 1.2 Test Facility The open area test site and conducted measurement facility used to collect the radiated data is located on 108 Yokowa-cho, Ise-shi, Mie-ken 516-1106 Japan. This site has been fully described in a report submitted to FCC office, and listed on September 12, 2000 (Registration number: 90412). Testing Laboratory A-pex International Co., Ltd. Telephone: +81 596 39 1485 108 Yokowa-cho, Ise-shi Mie-ken 516-1106 JAPAN Facsimile: +81 596 39 0232

Test report FCC ID : E4EG8D-444H-A Our reference : 19L0021-02 Page : 5 of 13 Issued date : 99-12-14 Revised date : 00-11-20 2 PRODUCT DESCRIPTION OMRON Corporation, Model G8D-444H-A (referred to as the EUT in this report) is a Keyless Entry System (Transmitter). The specification is as following : Operation Frequency : 4.19MHz Carrier Frequency : 307.9MHz Operation Voltage : DC 3V, 20mA (Battery) 3 TESTED EQUIPMENT DETAILS The FCC IDs for all equipment, plus description of all cables used in the tested system are: Model FCC ID Description Cable description Backshell Material (1) OMRON E4EG8D-444H-A Keyless Entry System - - M/N: G8D-444H-A (Transmitter) S/N: - (EUT) Testing Laboratory A-pex International Co., Ltd. Telephone: +81 596 39 1485 108 Yokowa-cho, Ise-shi Mie-ken 516-1106 JAPAN Facsimile: +81 596 39 0232

Test report FCC ID : E4EG8D-444H-A Our reference : 19L0021-02 Page : 6 of 13 Issued date : 99-12-14 Revised date : 00-11-20 4 SYSTEM TEST CONFIGURATION 4.1 Justification The measurement was performed with the system configuration shown in Figure 4.2. Running mode was taken for the EUT operation mode. 4.2 Test Procedure Tabletop Equipment Radiated Emissions EUT was placed on a platform of nominal size, 1m by 1.0m, raised 80cm above the conducting ground plane. Test was made with the antenna positioned in both the horizontal and vertical planes of polarization. The measurement antenna was varied in height above the conducting ground plane to obtain the maximum signal strength. Testing Laboratory A-pex International Co., Ltd. Telephone: +81 596 39 1485 108 Yokowa-cho, Ise-shi Mie-ken 516-1106 JAPAN Facsimile: +81 596 39 0232

Test report FCC ID : E4EG8D-444H-A Our reference : 19L0021-02 Page : 7 of 13 Issued date : 99-12-14 Revised date : 00-11-20 Figure 4.2 Configuration of Tested System Front View (1) Top View (1) Testing Laboratory A-pex International Co., Ltd. Telephone: +81 596 39 1485 108 Yokowa-cho, Ise-shi Mie-ken 516-1106 JAPAN Facsimile: +81 596 39 0232

Test report FCC ID : E4EG8D-444H-A Our reference : 19L0021-02 Page : 8 of 13 Issued date : 99-12-14 Revised date : 00-11-20 5 RADIATED MEASUREMENT PHOTOS Figure 5.1 Radiated Measurement Photos Testing Laboratory A-pex International Co., Ltd. Telephone: +81 596 39 1485 108 Yokowa-cho, Ise-shi Mie-ken 516-1106 JAPAN Facsimile: +81 596 39 0232

Test report FCC ID : E4EG8D-444H-A Our reference : 19L0021-02 Page : 9 of 13 Issued date : 99-12-14 Revised date : 00-11-20 5.1 Measurement Uncertainty Radiated Emission Test The measurement uncertainty (with a 95% confidence level) for this test was +3.3dB. The data listed in this test report has enough margin, more than 3.3dB. Testing Laboratory A-pex International Co., Ltd. Telephone: +81 596 39 1485 108 Yokowa-cho, Ise-shi Mie-ken 516-1106 JAPAN Facsimile: +81 596 39 0232

Test report FCC ID : E4EG8D-444H-A Our reference : 19L0021-02 Page : 10 of 13 Issued date : 99-12-14 Revised date : 00-11-20 6 RADIATED EMISSION DATA The initial step in collecting radiated data was a spectrum analyzer peak scan of the measurement range (30MHz-3100MHz). The final data was reported in the worst-case emissions. The minimum margin to the limit is as follows : * 30MHz - 1000MHz : QP Detect *1000MHz - 3100MHz : PK Detect Receiver Correction Field Frequency Reading Factor Strength Limit Margin (GHz) (dBuV) (dBuV) (dBuV/m) (dBuV/m) (dBuV) 307.9 68.6 -2.0 66.6 75.1 8.5 The Fundamental Frequency of this equipment is 307.9MHz. The peak of output level of fundamental frequency was confirmed at the 307.9MHz by perfarming the meaurement. It was corroborated that equipment was within of the tolerance which is prescribed in the FCC requlation Part 15 Subpart C sec. 15.231 (c). Since the fundamental frequency is 307.9MHz, the upper limit could be 308.6 MHz and lower limit could be 307.2MHz. The measurement result was 308.1MHz when the limit was 308.6MHz and also another measurement result was 307.6 MHz when the limit was 307.2MHz. Any spurious emissions did not detect except fundamental frequency’s spurious. Testing Laboratory A-pex International Co., Ltd. Telephone: +81 596 39 1485 108 Yokowa-cho, Ise-shi Mie-ken 516-1106 JAPAN Facsimile: +81 596 39 0232

Test report FCC ID : E4EG8D-444H-A Our reference : 19L0021-02 Page : 11 of 13 Issued date : 99-12-14 Revised date : 00-11-20 6.1 Field Strength Calculation The field strength is calculated by adding the Antenna Factor, Cable Factor and Antenna Pad, and subtracting the Amplifier Gain from the measured reading. The sample calculation is as follows : FS = RA + AF + CF + AT - AG where FS = Field Strength RA = Receiver Reading AF = Antenna Factor CF = Cable Factor AT = Antenna Pad AG = Amplifier Gain Assume a receiver reading of 68.6 dBuV is obtained. The antenna Factor of 14.2 dB, Cable Factor of 5.2 dB is added The Antenna Pad of 6.0 dB (30MHz - 1000MHz) and Amplifier Gain of 27.4 dB is subtracted, giving a field strength of 66.6 dBuV/m. FS = 68.6 + 14.2 + 5.2 + 6.0 - 27.4 = 66.6 dBuV/m Testing Laboratory A-pex International Co., Ltd. Telephone: +81 596 39 1485 108 Yokowa-cho, Ise-shi Mie-ken 516-1106 JAPAN Facsimile: +81 596 39 0232

Test report FCC ID : E4EG8D-444H-A Our reference : 19L0021-02 Page : 12 of 13 Issued date : 99-12-14 Revised date : 00-11-20 7 TEST EQUIPMENT USED NAME MANUFACTURER MODEL Control No. Calibrated Until Pre Amplifier Hewlett Puckered 8447D AF1 May 16, 2000 Pre Amplifier Hewlett Packard 8449B AF4 May 16, 2000 Biconical Antenna Schwarzbeck BBA9106 BA3 April 30, 2000 Logperiodic Antenna Schwarzbeck UHALP9108-A LA6 February 14 , 2000 Horn Antenna AH System, Inc SAS-200/571 HA1 February 5 , 2000 Spectrum Analyzer Hewlett Packard 8567A SA4 May 16, 2000 Spectrum Analyzer Advantest R3265 APSPA04 May 16, 2000 Test Receiver Rohde & Schwarz ESVS-10 TR6 April 20, 2000 Microwave Cable Suhner Sucoflex104 CC-C1 April 30, 2000 Assembly Microwave Cable Suhner Sucoflex104 CC-C2 April 30, 2000 Assembly indicates EMI Test Equipment used. All measurement equipment is traceable to national standard Testing Laboratory A-pex International Co., Ltd. Telephone: +81 596 39 1485 108 Yokowa-cho, Ise-shi Mie-ken 516-1106 JAPAN Facsimile: +81 596 39 0232

Test report FCC ID : E4EG8D-444H-A Our reference : 19L0021-02 Page : 13 of 13 Issued date : 99-12-14 Revised date : 00-11-20 APPENDIX Test Data Radiated emissions A1-A3 Testing Laboratory A-pex International Co., Ltd. Telephone: +81 596 39 1485 108 Yokowa-cho, Ise-shi Mie-ken 516-1106 JAPAN Facsimile: +81 596 39 0232


Document Created: 2000-11-21 03:08:14
Document Modified: 2000-11-21 03:08:14
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC