Test Report OMRON

FCC ID: E4EG8D-320A-B

Test Report

Download: PDF
FCCID_25349

FCC ID: E4EG8D—320A—B TUV FCC PART 15 SUBPART B Class B Limit MANUFACTURER‘S NAME OMRON Corp NAME OF EQUIPMENT Superheterodyne Receiver, RF Keyless Entry System MODEL NUMBER G8D—320A—B MANUFACTURER‘S ADDRESS 1—1203, Yashirogaoka, Meito—Ku Nagoya—City, Aichi., 465—0051 Japan TEST REPORT NUMBER W8570.2 TEST DATE 10 December 1998 According to testing performed at TUV Product Service Inc, the above—mentioned unit is in compliance with the electromagnetic compatibility requirements defined in FCC Part 15. It is the manufacturer‘s responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical characteristics. Any modifications necessary for compliance made during testing on the above mentioned date(s) must be implemented in all production units for compliance to be maintained. TUV Product Service Inc, as an independent testing laboratory, declares that the equipment tested as specified above conforms to the requirements of FCC Part 15. Date: 31 December 1998 * Location: Taylors Falls MN . M. Jotyj/son J[]T. Schneider USA Test Engineer NVLAP Signatory Not Transferable

FCC ID: E4EG8D—320A—B . PRODUCT SERVICE_ EMC EMISSION — TEST REPOR T Test Report File No. WO11854101.2 Date of issue: 31 December 1998 Model / Serial No. G8D—320A—B / Product Type Superheterodyne Receiver, RF Keyless Entry System Applicant OMRON Corp Manufacturer OMRON Corp License holder OMRON Corp Address 1—1203, Yashirogaoka, Meito—Ku Nagoya—City, Aichi., 465—0051 Japan Test Result E Positive O Negative Test Project Number Reference(s) w8B570.2 Total pages including Appendices 22 TUV Product Service inc is a subcontractor to TUV Product Service, GmbH according to the principles outlined in ISO/IEC Guide 25 and EN 45001. TUV Product Service Inc reports apply only to the specific samples tested under stated test conditions. It is the manufacturer‘s responsibility to assure that additional production units of this model are manufactured with identical efectrical and mechanicat components. TUV Product Service Inc shall have no liability for any deductions, inferences or generalizations drawn by the client or others from TUV Product Service Inc issued reports. This report is the confidential property of the client. As a mutual protection to our clients, the public and ourselves, extracts from the test report shall not be reproduced except in full without our written approval. This report shall not be used by the client to claim product endorsement by NVLAP or any agency of the US government. TUV Product Service Inc andits professional staff hold government and professional organization certifications and are members of AAMI, ACIL, AEA, ANSI, IEEE, NVLAP, and VCCI File No. WO11857001.2, Page 1 of 12 TUV PRODUCT SERVICE INC 19035 Wild Mountain Road Taylors Falls MN 55084—1758 Tel: 651 638 0297 Fax: 651 638 0298 Rev.No 1.0 >

FCC ID: E4EG8D—320A—B TUV PRODUCT SERVICE _ DIRECTORY — EMISSIONS Page(s) A) Documentation Test report 1 — 10 Directory Test Regulations Deviations from standard / Summary 10 Test—setups (Photos) 11 — 12 Test—setup (drawing) Appendix A B) Test data Conducted emissions 10/150 kHz — 30 MHz 5, 9 Radiated emissions 10 kHz — 30 MHz 5, 9 Radiated emissions 30 MHz — 1000 MHz 6, 9 Interference power 30 MHz — 300 MHz 6, 9 Equivalent Radiated emissions 1 GHz — 18 GHz 7, 9 C) Appendix A Test Data Sheets and Test Setup Drawing(s) A2 — AS D) Appendix B Constructional Data Form B2 Product Information Form{(s) B3 E) Appendix C Measurement Protocol C1 — C2 File No. WO11857001.2, Page 2 of 12 TUV PRODUCT SERVICE INC 19035 Wild Mountain Road Taylors Falls MN 55084—1758 Tel: 651 638 0297 Fax: 651 638 0298 Rev.No 1.0

~_ "EMISSIONS TE FCC ID: E4EG8D—320A—B TUV PRODUCT SERVICE ST REGULATIONS : The emissions tests were performed according to following regulations: 0 — EN 50081—1 / 1991 0 — EN 55011 / 1991 J — Group 1 0A — Group 2 0 — Class A 0 — Class B O — EN 55013 / 1990 0 — EN 55014 / 1987 O — Household appliances and similar 0 — Portable tools 0 — Semiconductor devices L — EN 55014 / A2:1990 O — EN 55014 / 1993 0 — Household appliances and similar 0 — Portable tools L — Semiconductor devices 0 — EN 55015 / 1987 O — EN 55015 / A1:1990 O — EN 55015 / 1993 Q — EN 55022 / 1987 {Q — Class A 0O — Class B O — EN 55022 / 1994 0 — Class A Q — Class B oA — Bs A — vecl 0O — Class A 0 — Class B m — FCC 0 — Class A I — Class B 0 — AS 3548 (1992) 0 — Class A 0 — Class B 0 — CISPR 11 (1990) {Q — Group 1 0 — Group 2 0O — Class A 0 — Class B 0 — CISPR 22 (1993) {Q — Class A 0O — Class B File No. W0O11857001.2, Page 3 of 12 TUV PRODUCT SERVICE INC 19035 Wild Mountain Road Taylors Fallis MN 55084—1758 Tel: 651 638 0297 Fax: 651 638 0298 Rev.No 1.0

FCC ID: E4EGS8D—320A—B TUV PRODUCT SERVICE Environmental conditions in the lab: C Actual Temperature :16 °C Relative Humidity : 35 % Atmospheric pressure : 99.6 kPa Power supply system : 12 VDC Sign Explanations: 0 — not applicable ® — applicable File No. W011857001.2, Page 4 of 12 TUV PRODUCT SERVICE INC 19035 Wild Mountain Road Taylors Falls MN 55084—1758 Tel: 651 638 0297 Fax: 651 638 0298 Rev.No 1.0

FCC ID: E4EG8D—320A—B TV PRODUCT SER\IICE _ Emissions Test Conditions: CONDUCTED EMISSIONS (Interference Voltage) 0 |The CONDUCTED EMISSIONS (INTERFERENCE VOLTAGE) measurements were performed at the following test location: fl — Test not applicable l 0 — Wild River Lab Large Test Site (Open Area Test Site) O — Wild River Lab Small Test Site (Open Area Test Site) 0 — Oakwood Lab (Open Area Test Site) 0 — Wild River Lab Screen Room 0 — New Brighton Lab Shielded Room Test equipment used : Model Number Manufacturer Description Serial Number Cal Date Emissions Test Conditions: RADIATED EMISSIONS (Magnetic Field) [The RaptaTED Emissions (MacNETIc FIELD) measurements were performed at the following test location: 0 — Wild River Lab Large Test Site (Open Area Test Site) 0 — Wild River Lab Small Test Site (Open Area Test Site) 0 — Oakwood Lab (Open Area Test Site) at a test distance of : CA — 3 meters O — 30 meters |LTest not applicable J Test equipment used : Model Number Manufacturer Description Serial Number Cal Date File No. W011857001.2, Page 5 of 12 TUV PRODUCT SERVICE INC 19035 Wild Mountain Road Taylors Falls MN 55084—1758 Tel: 651 638 0297 Fax: 651 638 0298 Rev.No 1.0

FCC ID: EA4EG8D—320A—B TWV PRODUCT SERVICE _ Emissions Test Conditions: RADIATED EMISSIONS (Electric Field) i The RapiaTED Emissions (ELECTRIC FIELD) measurements, in the frequency range of 30 MHz—1000 MHz, were tested in a horizontal and vertical polarization at the following test location : E — Test not applicable l 0 — Wild River Lab Large Test Site (Open Area Test Site) E® — Wild River Lab Small Test Site (Open Area Test Site) 0 — Oakwood Lab (Open Area Test Site) at a test distance of : N — 3 meters 0O — 10 meters L — 30 meters Test equipment used : Model Number Manufacturer Description Serial Number Cal Date m — 3146 Electro—Mechanics (EMCO) Log Periodic Antenna 9406—3865 7—98 — 3108 Electro—Mechanics (EMCO) Biconical Antenna 2119 7—98 n— 8566B Hewlett—Packard Spectrum Analyzer 2430A00930 4—98 I — 85662A Hewlett—Packard Analyzer Display 2403A08134 4—98 m— 85650A Hewlett—Packard Quasi—Peak Adapter 2521A01006 4—98 m— 8447D Hewlett—Packard Preamplifier 2648A04942 3—98 Use of the calibrated equipment on this list ensures traceability to national and international standards. Emissions Test Conditions: INTERFERENCE POWER The InTERFERENCE PoOwER measurements were performed by using the absorbing clamp on the mains and interface cables in the frequency range 30 MHz — 300 MHz at the following test location : i — Test not applicable T A — Wild River Lab Large Test Site (Open Area Test Site) 0 — Wild River Lab Small Test Site (Open Area Test Site) 0 — Oakwood Lab (Open Area Test Site) A — Wild River Lab Screen Room C — New Brighton Lab Shielded Room Test equipment used : Model Number Manufacturer Description Serial Number Cal Date File No. W0O11857001.2, Page 6 of 12 TUV PRODUCT SERVICE INC 19035 Wild Mountain Road Taylors Falls MN 55084—1758 Tel: 651 638 0297 Fax: 651 638 0298 Rev.No 1.0

FCC ID: E4EG8D—320A—B TVPRODUCT SERVICE _ Emissions Test Conditions: RADIATED EMISSIONS (Electric Field) | The EquivaLcent RaDIATED EmissiOoNns measurements in the frequency range 1 GHz — 2 GHz were performed in a horizontal and vertical polarization at the following test location : 0O — Wild River Lab Large Test Site (Open Area Test Site) E — Wild River Lab Small Test Site (Open Area Test Site) 0 — Oakwood Lab (Open Area Test Site) 0 — Wiid River Lab Screen Room at a test distance of: O — 1 meters M — 3 meters 0 — 10 meters [El — Test not applicable Test equipment used : Model Number Manufacturer Description Serial Number Cal Date n — 3115 Electro—Mechanics (EMCO) Horn Antenna 2483 11—98 n — 8566B Hewlett—Packard Spectrum Analyzer 2430A00930 4—98 ui — 85662A Hewlett—Packard Analyzer Display 2403408134 4—98 m — 85650A Hewlett—Packard Quasi—Peak Adapter 2521401006 4—98 m — ZHL—1042J Mini—Circuits Preamplifier 32296 4—98 Use of the calibrated equipment on this list ensures traceability to national and international standards. File No. WO11857001.2, Page 7 of 12 TUV PRODUCT SERVICE INC 19035 Wild Mountain Road Taylors Falls MN 55084—1758 Tel: 651638 0297 Fax: 651 638 0298 Rev.No 1.0

FCC ID: E4EG8D—320A—B TV PRODUCT SERVICE Equipment Under Test (EUT) Test Operation Mode — Emission tests : The device under test was operated under the following conditions during emissions testing: 0 — Standby 0 — Test program (H — Pattern) 0 — Test program (color bar) 0 — Test program (customer specific) 0O — Practice operation iE — Normal Operating Mode Q — Configuration of the device under test: 0A — See Constructional Data Form in Appendix B — Page B2 E — See Product Information Form in Appendix B — beginning on Page B3 The following peripheral devices and interface cables were connected during the measurement: 0— Type : 0 — Type : O— Type : 0— Type : 0— Type : 0O — Type : 0O — Type: 0— Type : 0 — unshielded power cable E — unshielded cables 0A — shielded cables MPS.No.: O — customer specific cables C— [ — File No. WO11857001.2, Page 8 of 12 =~ TUV PRODUCT SERVICE INC 19035 Wild Mountain Road Taylors Falls MN 55084—1758 Tel: 651 638 0297 Fax: 651638 0298 Rev.No 1.0

FCC ID: E4EG8D—320A—B TUV PRODUCT SERVICE Emission Test Results: |Conducted emissions 450 kHz — 30 MHz The requirements are 0 — MET 0 — NOT MET Minimum limit margin dB at MHz Maximum limit exceeding dB at MHz Remarks: lRadiated emissions (magnetic field) 10 kHz — 30 MHz The requirements are Q — MET 0 — NOT MET Minimum limit margin dB at MHz Maximum limit exceeding dB at MHz Remarks: Radiated emissions (electric field) 30 MHz — 1000 MHz ] The requirements are E — MET 0 — NOT MET Minimum limit margin >10 dB at MHz Maximum limit exceeding dB at MHz Remarks: Interference Power at the mains and interface cables 30 MHz — 300 MHz The requirements are 0O — MET 0O — NOT MET Minimum limit margin dB at MHz Maximum timit exceeding dB at MHz Remarks: Equivalent Radiated emissions 1 GHz — 2 GHz | The requirements are m — MET 0 — NOT MET Minimum limit margin >10 dB at MHz Maximum limit exceeding dB at MHz Remarks: File No. WO11857001.2, Page 9 of 12 TUV PRODUCT SERVICE INC 19035 Wild Mountain Road Taylors Falis MN 55084—1758 Tel: 651 638 0297 Fax: 651 638 0298 Rev.No 1.0

FCC ID: E4EG8D—320A—B TV PRODUCT SERVICE DEVIATIONS FROM STANDARD: None. GENERAL REMARKS: SUMMARY: The requirements according to the technical regulations are E — met 0 — not met. The device under test does E — fulfill the general approval requirements mentioned on page 3. 0 — not fulfill the general approval requirements mentioned on page 3. Testing Start Date: 10 December 1998 Testing End Date: 10 December 1998 — TUV PRODUCT SERVICE INC — MUAT $ Ameitcc J. T. bchneider NVLAP Signatory R. M. Johnson File No. WO11857001.2, Page 10 of 12 TUV PRODUCT SERVICE INC 19035 Wild Mountain Road Taylors Falls MN 55084—1758 Tel: 651 638 0297 Fax: 651 638 0298 Rev.No 1.0

FCC ID: E4EG8D—320A—B oy _ propuct sER hanl Test—setup photo(s): Conducted emission 10/150 kHz — 30 MHz Not Applicable File No. WO11857001.2, Page 11 of 12 :s4 TUV PRODUCT SERVICE INC 19035 Wild Mountain Road Taylors Falls MN 55084—1758 Tel: 651 638 0297 Fax: 651 638 0298 Rev.No 1.0 ;

FCC ID: E4EGBD—320A—B TUV rronuer service Testsotup photo(s) Radiated emission 90 tktz File No. W011887001.2, Page 12 of 12 1w rroover servce io 1s08 Wiieanan Roas Tayersraiht statise Tecesteseom? Fac ootewnoese Recio i0

FCC ID: EA4EG8D—320A—B TV s C PRODUCTSERVIC AppendixA Test Data Sheets and Test Setup Drawing(s) File No. WO11857001.2, Page A1 of AS Taylors Falls MN 55084—1758 Tel: 651 638 0297 Fax: 651 638 0298 Rev.No ‘17.’0‘ TUV PRODUCT SERVICE INC 19035 V\fildlMounfiain Road

FCC ID: E4EG8D—320A—B TEST SETUP FOR EMISSIONS TESTING TVPRODUCT SERVICE WILD RIVER LAB Small Test Site (STS) =Z~~ ................................................................. STS Building x 8 meters 30 meter antenna Non—conducting Shelter (18.82m X 9.41m) 4.71m End View of Sheiter 10 meter antenna 3 meter antenna Enlarged View of InsideSheliter (4 meters square) Inside o Shelter EUT 270 Turntable Control Cable Ground Screen (34 meters long x 12 meters wide) 60 180 50 Hz Hz Turntable is 1.2 meters in diameter File No. WO11857001.2, Page A2 of A5 TUV PRODUCT SERVICE INC 19035 Wild Mountain Road Taylors Falls MN 55084—1758 Tel: 651 638 0297 Fax: 651 638 0298 Rev.No 1.0

FCC ID: E4EG8D—320A—B TW PRODUCT SERVICE EL REPORT #W8570 RADIATED EMISSIONS AT 3 METERS 12/10/98 3 RUN 1 OMRON G8D—320A—B RECEIVER Linits: 10 100 Freq.— MHz 1000 10008 File No. WO11857001.2, Page A3 of AS TUV PRODUCT SERVICEINC 19035 WIdMountaln Road Taylors Falls MN 55084—1758 Tel 651 638 0297 Fax: 651 638 0298 RevNo1 .0

FCC ID: E4EG8D—320A—B eropuct service. 3 T U V P R O D U C T S Eo R V I C E RADIATED EMISSIONS d Small Test Site Report W8570 Run 1 3 3 Meter Antenna Distance Date 12/10/98 Page 1 6 Equipment Under Test: Engineer / | OMRON Tech: RMJ 6 ‘,;y GB8D—320A—B RECEIVER Requester l © Notes: ; Frequency Level Factor Cable Final Az Polar\ Delta Delta MHz dBuv dB dB dBuV/m deg Height PCC B FCC A 0 DEGREES VERTICAL 1 METER HIGH. NO EMISSIONS DETECTED 30 — 1000MHZ IN IDLE MODE OR ACTIVE MODE. END OF SCAN. File No. WO11857001.2, Page A4 of AS TUV PRODUCT SERVICE INC 19035 Wild Mountain Road Taylors Falls MN 55084—1758 Tel: 651 638 0297 Fax: 651 638 0298 Rev.No 1.0 s Engsnecs — P reure seponimvntinetiaroms nyx wesrerar‘s pomesvee: NobireeZ mceigush acterenainprtsry renprrenperecrrome1 ome (ens

FCC ID: E4EG8D—320A—B PROOUCT SERVICE ppenmmnfastCt T U V P R O D U C T S E R V I C E RADIATED EMISSIONS Small Test Site Figure Report W8570 Run 1 3 Meter Antenna Distance Date 12/10/98 Pa 2 Equipment Under Test: Engineer OMRON Tech: RMJ GB8D—32Z0A—B RECEIVER Requester Notes: Measurement Summary Frequency —————~— Final ————— Azimuth Polar\ Delta Delta MHz dBuV /m uV /m deg Height FCC B FCC A Minimum Passing Margin for FCC B is 99 dB at 0 MHz Minimum Passing Margin for FCC A is 99 dB at 0 MHz File W8570 Run 1 File No. WO11857001.2, Page AS of AS TUV PRODUCT SERVICE INC 19035 Wild Mountain Road Taylors Falls MN 55084—1758 Tel: §51 638 0297 Fax: 651 638 0298 o2 neeenE hafde o 4 + x oo

FCC ID: E4EG8D—320A—B fapitnerafiinail — PRODUCT SERVICE AppendixB Constructional Data Form and Product Information Form(s) File No. WO11857001.2, Page B1 of B3 TUV PRODUCT SERVICE INC 19035 Wild Mountain Road Taylors Falls MN 55084—1758 Tel: 651 638 0297 Fax: 651 638 0208 Rev.No 1.0—

FCC ID: E4EG8D—320A—B en ien __PRODUCT SERVICE 23 Constructional Data Form Not Applicable File No. WO11857001.2, Page B2 of B3 TUV PRODUCT SERVICE INC 19035 Wild Mountain Road Taylors Falls MN 55084—1758 Tel: 651 638 0297 Fax: 651638 0298 Rev. No 1.0 $ 2o

FCC ID: E4EG8D—320A—B TVPRODUCT SERV'ICVE Technical Description of the system CPU — TYPE :68HC805P 18 (8bit) — Motorola — ROM :8K BYTES — RAM :192 BYTES — EEPROM :128 BYTES — CLOCK FREQUENCY ©4.00 MHZ — CLOCK FREQUENCY GENERATION :CERAMIC RESONATOR — PACKAGE :28pin SOP RF BLOCK — Carrier frequency :324.55 MHz — Frequency generation :Crystal resonator — Modulation :Single superheterodyne — Bandwidth :+£200 KkHz — Carrier detect sensitivity :58 dBuVemf OTHERS — Dimension :62 mm X 60 mm X 30 mm — Weight :80 g — Battery :Car battery — Operation voltage :12 VDC, 10 mA — Operation temperature :—30 to +80 degrees C File No. WO11857001.2, Page B3 of B3 _ TUV PRODUCT SERVICE INC 19035 Wild Mountain Road Taylors Falls MN 55084—1758 Tel: 651 638 0297 Fax: 651638 0298 Rev.No 1.0

FCC ID: E4EG8D—320A—B TW PRODUCT SERVICE Appendix C ' MEASUREMENT PROTOCOL GENERAL INFORMATION In compliance with FCC Docket 92—152, "Harmonization of Rules for Digital Devices Incorporate International Standards", testing for FCC compliance may be done following the ANSI C63.4—1992 procedures and using the CISPR 22 Limits. Measurement Uncertainty The test system for conducted emissions is defined as the LISN, tuned receiver or spectrum analyzer, and coaxial cable. The test system for radiated emissions is defined as the antenna, the pre—amplifier, the spectrum analyzer and the coaxial cable. These test systems have an expected uncertainty of +£4.5 dB. The equipment comprising the test systems are calibrated on an annual basis. Justification The Equipment Under Test (EUT) is configured in a typical user arrangement in accordance with the manufacturer‘s instructions. A cable is connected to each available port and either terminated with a peripheral into it‘s characteristic impedance or left unterminated. When appropriate, the cables are manually manipulated with respect to each other to obtain maximum emissions from the unit. CONDUCTED EMISSIONS The final level, expressed in dBuV, is arrived at by taking the reading directly from the EMI receiver. This level is compared directly to the FCC limit. To convert between dBuV and uV, the following conversions apply: dBuV = 20(log uV) uV = Inverse log(dBuV/20) RADIATED EMISSIONS The final level, expressed in dBuV/m, is arrived at by taking the reading from the spectrum analyzer (Level dBuV) and adding the antenna correction factor and cable loss factor (Factor dB) to it. This result then has the FCC limit subtracted from it to provide the Delta which gives the tabular data as shown in the data sheets in Attachment B. The amplifier gain is automatically accounted for by using an analyzer offset. Example: FCC B Delta Frequency Level! + Factor & = Final — Limit = FCC B (MHz) (dBuV) Cable (dB) (dBuV/m) (dBuV/m) (dB) 32.21 13.9 + 16.3 = 30.2 — 40.0 = —9.8 File No. WO11857001.2, Page C1 of C2 TUV PRODUCT SERVICE INC 19035 Wild Mountain Road Taylors Falls MN 55084—1758 Tel: 651 638 0297 Fax: 651 638 0298 Rev.No 1.0

DETAILS OF TEST PROCEDURES FCC ID: E4EG8D—320A—B TVPRODUCT SERVICE General Standard Information The test methods used comply with ANSI C63.4—1992 — "Methods of Measurement of Radio—Noise Emissions from Low— Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz." Conducted Emissions Conducted emissions on the 60 Hz power interface of the EUT are measured in the frequency range of 450 kHz to 30 MHz. The measurements are performed using a receiver, which has CISPR characteristic bandwidth and quasi—peak detection, and a Line Impedance Stabilization Network (LISN), with 50 /50 uH (CISPR 16) characteristics. Table top equipment is placed on a non—conducting table 80 centimeters above the floor and is positioned 40 centimeters from the vertical ground plane (wall) of the screen room. In some cases, a pre—scan using a spectrum analyzer is initially performed on the units comprising the system under test to locate the highest emissions. If the minimum passing margin appears to be less than 20 dB with a peak mode measurement, the emissions are re—measured using a tuned receiver or spectrum analyzer with quasi—peak and average detection and recorded on the data sheets. Radiated Emissions Radiated emissions from the EUT are measured in the frequency range of 30 to 1000 MHz using a spectrum analyzer and appropriate broadband linearly polarized antennas. Measurements between 30 MHz and 1000 MHz are made with 120 kHz/6 dB bandwidth and quasi—peak detection and measurements above 1000 MHz are made with a 1 MHz/6 dB bandwidth and peak detection. Table top equipment is placed on a 1.0 X 1.5 meter non—conducting table 80 centimeters above the ground plane. Floor standing equipment is placed directly on the turntable/ground plane. Interface cables that are closer than 40 centimeters to the ground plane are bundled in the center in a serpentine fashion so they are at least 40 centimeters from the ground plane. Cables to simulators/testers (if used in this test) are routed through the center of the table and to a screen room located outside the test area. The antenna is positioned 3 meters horizontally from the EUT. To locate maximum emissions from the test sample the antenna is varied in height from 1 to 4 meters, measurement scans are made with both horizontal and vertical antenna polarizations and the EUT are rotated 360 degrees. File No. WO11857001.2, Page C2 of C2 TUV PRODUCT SERVICE INC 19035 Wild Mountain Road Taylors Falls MN 55084—1758 Tel: 651 638 0297 Fax: 651 638 0298 Rev.No 1.0


Document Created: 1999-03-01 14:33:12
Document Modified: 1999-03-01 14:33:12
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC