Test Report

FCC ID: E2K-P05G

Test Report

Download: PDF
FCCID_1247431

Report No: T100127102-RP1 FCC ID: E2K-P05G Date of Issue: Feb. 3, 2010 FCC 47 CFR PART 15 SUBPART C TEST REPORT For Notebook Computer Regulatory Model: P05G Regulatory Type: P05G001 Trade Name: DELL Issued to Dell Computer Corporation ONE DELL WAY, ROUND ROCK, TEXAS 78682, U.S.A. Issued by Compliance Certification Services Inc. No. 81-1, Lane 210, Pa-De 2nd Rd., Luchu Hsiang, Taoyuan Shien, (338) Taiwan, R.O.C. TEL: 886-3-324-0332 FAX: 886-3-324-5235 http://www.ccsrf.com service@ccsrf.com Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by TAF, A2LA, NIST or any government agencies. The test results in the report only apply to the tested sample. Page 1 / 26

Report No: T100127102-RP1 FCC ID: E2K-P05G Date of Issue: Feb. 3, 2010 Revision History Issue Rev. Revisions Effect Page Revised By Date 00 Dec. 22, 2009 Initial Issue ALL Jill Shiau Page 2 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Report No: T100127102-RP1 FCC ID: E2K-P05G Date of Issue: Feb. 3, 2010 TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION..................................................................................... 4 2 EUT DESCRIPTION ......................................................................................................... 5 3 TEST METHODOLOGY ................................................................................................... 6 3.1. EUT CONFIGURATION ........................................................................................... 6 3.2. EUT EXERCISE ....................................................................................................... 6 3.3. GENERAL TEST PROCEDURES ............................................................................ 6 3.4. FCC PART 15.205 RESTRICTED BANDS OF OPERATIONS................................ 7 3.5. DESCRIPTION OF TEST MODES........................................................................... 7 4 INSTRUMENT CALIBRATION......................................................................................... 8 4.1. MEASURING INSTRUMENT CALIBRATION .......................................................... 8 4.2. MEASUREMENT EQUIPMENT USED .................................................................... 8 4.3. MEASUREMENT UNCERTAINTY ........................................................................... 9 5 FACILITIES AND ACCREDITATIONS........................................................................... 10 5.1. FACILITIES ............................................................................................................ 10 5.2. EQUIPMENT .......................................................................................................... 10 5.3. TABLE OF ACCREDITATIONS AND LISTINGS.................................................... 11 6 SETUP OF EQUIPMENT UNDER TEST........................................................................ 12 6.1. SETUP CONFIGURATION OF EUT ...................................................................... 12 6.2. SUPPORT EQUIPMENT........................................................................................ 12 7 FCC PART 15.225 REQUIREMENTS ............................................................................ 13 7.1. RADIATED EMISSIONS ........................................................................................ 13 7.2. FREQUENCY STABILITY ...................................................................................... 19 7.3. POWERLINE CONDUCTED EMISSIONS ............................................................. 21 APPENDIX I PHOTOGRAPHS OF TEST SETUP ............................................................... 24 Page 3 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Report No: T100127102-RP1 FCC ID: E2K-P05G Date of Issue: Feb. 3, 2010 1 TEST RESULT CERTIFICATION Dell Computer Corporation Applicant: ONE DELL WAY, ROUND ROCK, TEXAS 78682, U.S.A. Equipment Under Test: Notebook Computer Trade Name: DELL Regulatory Model: P05G Regulatory Type: P05G001 Date of Test: February 1, 2010 APPLICABLE STANDARDS STANDARD TEST RESULT FCC 47 CFR Part 15 Subpart C No non-compliance noted We hereby certify that: The above equipment was tested by Compliance Certification Services Inc. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4: 2003 and the energy emitted by the sample tested as described in this report is in compliance with the requirements of FCC Rules Part 15.207, 15.209, 15.225. The test results of this report relate only to the tested sample identified in this report. Approved by: Reviewed by: Ethan Huang Stan Lin Section Manager Supervisor Page 4 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Report No: T100127102-RP1 FCC ID: E2K-P05G Date of Issue: Feb. 3, 2010 2 EUT DESCRIPTION Product Notebook Computer Trade Name DELL Regulatory Model P05G Regulatory Type P05G001 Model Difference N/A EUT Power Rating 19.5VDC, 4.62A Power Adapter Manufacturer DELL Model LA90PE0-01 I/P: 100-240Vac, 50-60Hz, 1.5A Power Adapter Power Rating O/P: 19.5V, 4.62A Operating Frequency Range 13.56MHz Modulation Technique ASK/BPSK Number of Channels 1 Channels Antenna Specification Coil Antenna Remark: 1. The sample selected for test was engineering sample that approximated to production product and was provided by manufacturer. 2. This submittal(s) (test report) is intended for FCC ID: E2K-P05G filing to comply with Section 15.225 of the FCC Part 15, Subpart C Rules. Page 5 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Report No: T100127102-RP1 FCC ID: E2K-P05G Date of Issue: Feb. 3, 2010 3 TEST METHODOLOGY The tests documented in this report were performed in accordance with ANSI C63.4 (2003) and FCC CFR 47 Part 2, 15.207, 15.209 and 15.225. 3.1. EUT CONFIGURATION The EUT configuration for testing is installed on RF field strength measurement to meet the Commissions requirement and operating in a manner that intends to maximize its emission characteristics in a continuous normal application. 3.2. EUT EXERCISE The EUT was operated in the engineering mode to fix the TX frequency that was for the purpose of the measurements. 3.3. GENERAL TEST PROCEDURES Conducted Emissions The EUT is placed on the turntable, which is 0.8 m above ground plane. According to the requirements in Section 13.1.4.1 of ANSI C63.4 (2003). Conducted emissions from the EUT measured in the frequency range between 0.15 MHz and 30MHz using CISPR Quasi-peak and average detector modes. Radiated Emissions The EUT is placed on a turn table, which is 0.8 m above ground plane. The turntable shall rotate 360 degrees to determine the position of maximum emission level. EUT is set 3m away from the receiving antenna, which varied from 1m to 4m to find out the highest emission. And also, each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. In order to find out the maximum emissions, exploratory radiated emission measurements were made according to the requirements in Section 13.1.4.1 of ANSI C63.4 (2003). Page 6 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Report No: T100127102-RP1 FCC ID: E2K-P05G Date of Issue: Feb. 3, 2010 3.4. FCC PART 15.205 RESTRICTED BANDS OF OPERATIONS (a) Except as shown in paragraph (d) of this section, only spurious emissions are permitted in any of the frequency bands listed below: MHz MHz MHz GHz 0.090 - 0.110 16.42 - 16.423 399.9 - 410 4.5 - 5.15 1 0.495 - 0.505 16.69475 - 16.69525 608 - 614 5.35 - 5.46 2.1735 - 2.1905 16.80425 - 16.80475 960 - 1240 7.25 - 7.75 4.125 - 4.128 25.5 - 25.67 1300 - 1427 8.025 - 8.5 4.17725 - 4.17775 37.5 - 38.25 1435 - 1626.5 9.0 - 9.2 4.20725 - 4.20775 73 - 74.6 1645.5 - 1646.5 9.3 - 9.5 6.215 - 6.218 74.8 - 75.2 1660 - 1710 10.6 - 12.7 6.26775 - 6.26825 108 - 121.94 1718.8 - 1722.2 13.25 - 13.4 6.31175 - 6.31225 123 - 138 2200 - 2300 14.47 - 14.5 8.291 - 8.294 149.9 - 150.05 2310 - 2390 15.35 - 16.2 8.362 - 8.366 156.52475 - 2483.5 - 2500 17.7 - 21.4 8.37625 - 8.38675 156.52525 2655 - 2900 22.01 - 23.12 8.41425 - 8.41475 156.7 - 156.9 3260 - 3267 23.6 - 24.0 12.29 - 12.293 162.0125 - 167.17 3332 - 3339 31.2 - 31.8 12.51975 - 12.52025 167.72 - 173.2 3345.8 - 3358 36.43 - 36.5 12.57675 - 12.57725 240 - 285 3600 - 4400 ( 2) 13.36 - 13.41 322 - 335.4 1 Until February 1, 1999, this restricted band shall be 0.490-0.510 MHz. 2 Above 38.6 (b) Except as provided in paragraphs (d) and (e), the field strength of emissions appearing within these frequency bands shall not exceed the limits shown in Section 15.209. At frequencies equal to or less than 1000 MHz, compliance with the limits in Section 15.209 shall be demonstrated using measurement instrumentation employing a CISPR quasi-peak detector. Above 1000 MHz, compliance with the emission limits in Section 15.209 shall be demonstrated based on the average value of the measured emissions. The provisions in Section 15.35 apply to these measurements. 3.5. DESCRIPTION OF TEST MODES The EUT had been tested under operating condition. Software used to control the EUT for staying in continuous transmitting and receiving mode was programmed. After verification, all tests carried out were with the worst-case test modes as shown below except radiated spurious emission worst case was in normal link mode. RF ID: Channel 13.56MHz was chosen for full testing. Page 7 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Report No: T100127102-RP1 FCC ID: E2K-P05G Date of Issue: Feb. 3, 2010 4 INSTRUMENT CALIBRATION 4.1. MEASURING INSTRUMENT CALIBRATION The measuring equipment, which was utilized in performing the tests documented herein, has been calibrated in accordance with the manufacturer's recommendations for utilizing calibration equipment, which is traceable to recognized national standards. 4.2. MEASUREMENT EQUIPMENT USED Equipment Used for Emissions Measurement Remark: Each piece of equipment is scheduled for calibration once a year. Powerline Conducted Emissions Test Site Name of Equipment Manufacturer Model Serial Number Calibration Due Spectrum Analyzer Agilent E4446A MY48250064 11/05/2010 Spectrum Analyzer R&S FSEB 825829/011 11/02/2010 USB Power Sensor BOONTON 52012 2061194 06/08/2010 3M Chamber Test Site Name of Equipment Manufacturer Model Serial Number Calibration Due Spectrum Analyzer Agilent E4446A MY48250064 11/05/2010 Spectrum Analyzer R&S FSEB 825829/011 11/02/2010 Pre-Amplifier HP 8447D 2944A06530 01/02/2011 Pre-Amplifier HP 8449B 3008A01738 04/17/2010 EMI Test Receiver SCHAFFNER SCR 3501 436 01/26/2011 Loop Antenna EMCO 6502 2356 05/28/2010 Bilog Antenna SCHWAZBECK VULB9160 3084 09/11/2010 Horn Antenna EMCO 3115 00022250 05/08/2010 Turn Table CCS CC-T-1F N/A N.C.R Antenna Tower CCS CC-A-1F N/A N.C.R Controller CCS CC-C-1F N/A N.C.R Test S/W LabVIEW 6.1 (Wugu Chamber EMI Teat V1_4.5.3) Page 8 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Report No: T100127102-RP1 FCC ID: E2K-P05G Date of Issue: Feb. 3, 2010 Powerline Conducted Emissions Test Site Name of Equipment Manufacturer Model Serial Number Calibration Due EMI Test Receiver R&S ESCI 100782 06/01/2010 LISN R&S ENV216 100066 05/06/2010 LISN R&S ENV 4200 830326/016 04/15/2010 Test S/W CCS-3A1-CE-Luchu 4.3. MEASUREMENT UNCERTAINTY Parameter Uncertainty Powerline Conducted Emission ± 1.7983 3M Semi Anechoic Chamber / 30MHz ~ 1GHz ±4.0235 3M Semi Anechoic Chamber / Above 1GHz ±3.87318 Remark: This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. Page 9 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Report No: T100127102-RP1 FCC ID: E2K-P05G Date of Issue: Feb. 3, 2010 5 FACILITIES AND ACCREDITATIONS 5.1. FACILITIES All measurement facilities used to collect the measurement data are located at No.199, Chunghsen Road, Hsintien City, Taipei Hsien, Taiwan, R.O.C. Tel: 886-2-2217-0894 / Fax: 886-2-2217-1029 No.11, Wugong 6th Rd., Wugu Industrial Park, Taipei Hsien 248, Taiwan Tel: 886-2-2299-9720 / Fax: 886-2-2298-4045 No. 81-1, Lane 210, Pa-De 2nd Rd., Luchu Hsiang, Taoyuan Shien, (338) Taiwan, R.O.C. Tel: 886-3-324-0332 / Fax: 886-3-324-5235 The sites are constructed in conformance with the requirements of ANSI C63.7, ANSI C63.4 (2003) and CISPR Publication 22. 5.2. EQUIPMENT Radiated emissions are measured with one or more of the following types of linearly polarized antennas: tuned dipole, biconical, log periodic, bi-log, and/or ridged waveguide, horn. Spectrum analyzers with pre-selectors and quasi-peak detectors are used to perform radiated measurements. Conducted emissions are measured with Line Impedance Stabilization Networks and EMI Test Receivers. Calibrated wideband preamplifiers, coaxial cables, and coaxial attenuators are also used for making measurements. All receiving equipment conforms to CISPR Publication 16-1, “Radio Interference Measuring Apparatus and Measurement Methods.” Page 10 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Report No: T100127102-RP1 FCC ID: E2K-P05G Date of Issue: Feb. 3, 2010 5.3. TABLE OF ACCREDITATIONS AND LISTINGS Country Agency Scope of Accreditation Logo CFR 47, FCC Part15/18, CISPR 22, EN 55022, ICES-003, AS/NZS CISPR 22, VCCI V-3, EN 55011, CISPR 11, IEC/EN 61000-4-2/3/4/5/6/8/11, EN 61000-6-1/2/3/4, USA A2LA EN 55024, CISPR 24, AS/NZS CISPR 24, AS/NZS 61000.6.2, EN 55014-1/-2, ETSI EN 300 386 v1.3.2/v1.3.3, IEC/EN 61000-3-2, AS/NZS 61000.3.2, IEC/EN 61000-3-3, AS/NZS 61000.3.3 FCC 3/10 meter Open Area Test Sites to perform USA MRA FCC Part 15/18 measurements TW1026 3/10 meter Open Area Test Sites and Japan VCCI conducted test sites to perform R-2882/2541/2798/725/1868 radiated/conducted measurements C-402/747/912 T-321/325 EN 55014-1, CISPR 14, CNS 13781-1, EN 55013, CISPR 13, CNS 13439, EN 55011, CISPR 11, CNS 13803, PLMN09, IS2045-0, LP0002 FCC Part 27/90, Part 15B/C/D/E, RSS-192/193/210/310 ETSI EN 300 328/ 300 220-1/ 300 220-2/ 301 Taiwan TAF 893/ 301 489-01/ 301 489-03/ 301 489-07 / 301 489-17/ 300 440-1/ 300 440-2 AS/NZS 4268, AS/NZS 4771 CISPR 22, EN 55022, CNS 13438, AS/NZS CISPR 22, VCCI, IEC/EN 61000-4-2/3/4/5/6/8/11, CNS 14676-2/3/4/5/6/8, CNS 14934-2/3, CNS 13783-1, CNS 13439, CNS 13803 SL2-IS-E-0014 / IN-E-0014 CNS 13438, CNS 13783-1, CNS 13439, Taiwan BSMI /A1-E-0014 /R1-E-0014 CNS 14115 /R2-E-0014 /L1-E-0014 Industry Canada RSS212, Issue 1 IC 2324C-3 Canada IC 2324C-5 Note: No part of this report may be used to claim or imply product endorsement by A2LA, TAF or other government agency. Page 11 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Report No: T100127102-RP1 FCC ID: E2K-P05G Date of Issue: Feb. 3, 2010 6 SETUP OF EQUIPMENT UNDER TEST 6.1. SETUP CONFIGURATION OF EUT See test photographs attached in Appendix 1 for the actual connections between EUT and support equipment. 6.2. SUPPORT EQUIPMENT For Radiated Emission test No. Device Type Brand Model Series No. FCC ID Data Cable Power Cord N/A **No any support equipment during the test. For Powerline Conducted Emission test No. Device Type Brand Model Series No. FCC ID Data Cable Power Cord D-Sub Cable: 1 LCD Monitor DELL 2407WFPb CN-0FC255-46633-660-045S FCC DoC Shielded, 1.8m Unshielded, 1.8m with two cores 2 USB Mouse DELL MO56UOA F0Q01BKU FCC DoC Unshielded, 1.8m N/A AC I/P: Unshielded, 1.8m e-SATA A02170-F22-0 3 ST-M10 FCC DoC Onnto Unshielded, 1.8m DC O/P: External HDD 003 Unshielded, 1.8m with a core Multimedia 4 Logitech ClearChat N/A FCC DoC Shielded, 1.8m N/A Headset AC I/P: Notebook Unshielded, 1.8m LAN Cable: 5 Computer DELL D400 0932RY E2K24GBRL DC O/P: Unshielded, 10m (Remote) Unshielded, 1.8m with a core Note: Grounding was established in accordance with the manufacturer’s requirements and conditions for the intended use. Page 12 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Report No: T100127102-RP1 FCC ID: E2K-P05G Date of Issue: Feb. 3, 2010 7 FCC PART 15.225 REQUIREMENTS 7.1. RADIATED EMISSIONS LIMIT According to §15.225, (a) The field strength of any emissions within the band 13.553 – 13.567 MHz shall not exceed 15,848 microvolts / meter at 30 meters. (b) Within the bands 13.410 – 13.553 MHz and 13.567 -13.710 MHz, the field strength of any emissions shall not exceed 334 microvolts / meter at 30 meters. (c) Within the bands 13.110 – 13.410 MHz and 13.710 – 14.010 MHz the field strength of any emissions shall not exceed 106 microvolts / meter at 30 meters. (d) The field strength of any emissions appearing outside of the 13.110 – 14.010 MHz and shall not exceed the general radiated emission limits in §15.209. According to §15.225(a), except as provided elsewhere in this Subpart, the emissions from an intentional radiator shall not exceed the field strength levels specified in the following table: Frequency Field Strength Measurement Distance (MHz) (µV/m at meter) (meter) 0.009 – 0.490 2400 / F (kHz) 300 0.490 – 1.705 24000 / F (kHz) 30 1.705 – 30.0 30 30 30 - 88 100** 3 88-216 150** 3 216-960 200** 3 Above 960 500 3 ** Except as provided in paragraph (g), fundamental emissions from intentional radiators operating under this Section shall not be located in the frequency bands 54-72 MHz, 76-88 MHz, 174-216 MHz or 470-806 MHz. However, operation within these frequency bands is permitted under other sections of this Part, e.g., Sections 15.231 and 15.241. Page 13 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Report No: T100127102-RP1 FCC ID: E2K-P05G Date of Issue: Feb. 3, 2010 TEST CONFIGURATION 9kHz ~ 30MHz 3m Loop antenna EUT Spectrum / Receiver Turntable 1m 0.8m Reference ground plane 30MHz ~ 1 GHz Antenna tower 3m Bilog antenna EUT 4m Spectrum / Receiver Turntable 1m 0.8m Pre-amp Reference ground plane Page 14 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Report No: T100127102-RP1 FCC ID: E2K-P05G Date of Issue: Feb. 3, 2010 TEST PROCEDURE 1. The EUT is placed on a turntable, which is 0.8m above ground plane. 2. The turntable shall be rotated for 360 degrees to determine the position of maximum emission level. 3. EUT is set 3m away from the receiving antenna, which is varied from 1m to 4m to find out the highest emissions. 4. Maximum procedure was performed on the six highest emissions to ensure EUT compliance. 5. And also, each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. 6. Set the spectrum analyzer in the following setting as: RBW=100kHz / VBW=300kHz / Sweep=AUTO 7. Repeat above procedures until the measurements for all frequencies are complete. TEST RESULTS No non-compliance noted. Page 15 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Report No: T100127102-RP1 FCC ID: E2K-P05G Date of Issue: Feb. 3, 2010 TEST DATA Operation Mode: TX mode Test Date: February 1, 2010 Temperature: 18°C Tested by: Alonso Lu Humidity: 60 % RH Polarity: Ver. / Hor. Correction Frequency Ant.Pol. Detector Mode Reading Result Limit 3m Margin Factor (MHz) (H/V) (PK/QP/AVG) (dBuV) (dBuV/m) (dBuV/m) (dB) (dB/m) 13.56 V QP 34.53 9.59 44.12 123.99 -79.87 37.2750 V QP 41.60 -14.00 27.60 40.00 -12.40 59.1000 V QP 40.94 -15.48 25.46 40.00 -14.54 83.3500 V QP 49.24 -19.15 30.09 40.00 -9.91 136.7000 V QP 37.64 -12.95 24.69 43.50 -18.81 267.6500 V QP 41.78 -12.12 29.66 46.00 -16.34 333.1250 V QP 38.82 -10.16 28.66 46.00 -17.34 364.6500 V QP 41.51 -9.61 31.90 46.00 -14.10 401.0250 V QP 39.42 -9.45 29.97 46.00 -16.03 432.5500 V QP 42.83 -8.70 34.13 46.00 -11.87 531.9750 V QP 44.13 -6.51 37.62 46.00 -8.38 Remark: 1. No emission found between lowest internal used / generated frequency to 30 MHz. (9kHz ~ 30MHz) 2. Measuring frequencies from 9 kHz to the 1GHz. 3. Radiated emissions measured in the measured frequency range were made with an instrument using peak detector or quasi-peak detector mode. 4. Data of measurement within this frequency range shown “ --- ” in the table above means the reading of emissions are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. 5. The IF bandwidth of SPA between 30MHz to 1GHz was 100kHz. 6. Calculation by Converting 30m to 3meter limits. 30m limit= 15848 (uV/m) **3m limit = 20*log(15848)+40log(30m/3m) (dBuV/m) = 84 + 40 (dBuV/m) = 124 (dBuV/m) Page 16 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Report No: T100127102-RP1 FCC ID: E2K-P05G Date of Issue: Feb. 3, 2010 Correction Frequency Ant.Pol. Detector Mode Reading Result Limit 3m Margin Factor (MHz) (H/V) (PK/QP/AVG) (dBuV) (dBuV/m) (dBuV/m) (dB) (dB/m) 13.56 H QP 36.01 9.59 45.60 123.99 -78.39 39.7147 H QP 35.11 -13.67 21.44 40.00 -18.56 134.3235 H QP 36.95 -13.45 23.50 43.50 -20.00 143.9750 H QP 36.42 -12.40 24.02 43.50 -19.48 165.8000 H QP 37.27 -13.41 23.86 43.50 -19.64 265.2250 H QP 45.83 -12.17 33.66 46.00 -12.34 333.1250 H QP 40.70 -10.16 30.54 46.00 -15.46 364.6500 H QP 40.34 -9.61 30.73 46.00 -15.27 401.0250 H QP 44.93 -9.45 35.48 46.00 -10.52 432.5500 H QP 43.97 -8.70 35.27 46.00 -10.73 531.9750 H QP 42.54 -6.51 36.03 46.00 -9.97 798.7250 H QP 36.02 -2.16 33.86 46.00 -12.14 Remark: 1. No emission found between lowest internal used / generated frequency to 30 MHz. (9kHz ~ 30MHz) 2. Measuring frequencies from 9 kHz to the 1GHz. 3. Radiated emissions measured in the measured frequency range were made with an instrument using peak detector or quasi-peak detector mode. 4. Data of measurement within this frequency range shown “ --- ” in the table above means the reading of emissions are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. 5. The IF bandwidth of SPA between 30MHz to 1GHz was 100kHz. 6. Calculation by Converting 30m to 3meter limits. 30m limit= 15848 (uV/m) **3m limit = 20*log(15848)+40log(30m/3m) (dBuV/m) = 84 + 40 (dBuV/m) = 124 (dBuV/m) Page 17 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Report No: T100127102-RP1 FCC ID: E2K-P05G Date of Issue: Feb. 3, 2010 TEST PLOT FOR CHANNEL MASK Page 18 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Report No: T100127102-RP1 FCC ID: E2K-P05G Date of Issue: Feb. 3, 2010 7.2. FREQUENCY STABILITY LIMIT According to §15.207(e), the frequency tolerance of the carrier signal shall be maintained within +/- 0.01% of the operating frequency over a temperature variation of –20 degrees to +50 degrees C at normal supply voltage, and for a variation in the primary supply voltage from 85% to 115% of the rated supply voltage at a temperature of 20 degrees C. For battery operated equipment, the equipment tests shall be performed using a new battery. TEST CONFIGURATION Temperature and Voltage Measurement (under normal and extreme test conditions) Temperature Chamber Spectrum Analyzer EUT AC/DC Power supply TEST PROCEDURE 1. Place the EUT on the table and set it in the transmitting mode. 2. Remove the antenna from the EUT and then connect a low loss RF cable from the antenna port to the spectrum analyzer. 3. Set the environment into appropriate environment. 4. Set the spectrum analyzer as RBW=1kHz, VBW = RBW, Span = 200kHz, Sweep = auto. 5. Mark the peak frequency and measure the frequency tolerance using frequency counter function. 6. Repeat until all the results are investigated. Page 19 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Report No: T100127102-RP1 FCC ID: E2K-P05G Date of Issue: Feb. 3, 2010 TEST RESULTS No non-compliance noted TEST DATA Temperature Variations Measured Delta Temp. Voltage Tolerance Limit Result Frequency Frequency (oC) (VAC) (%) (±%) (Pass/Fail) (MHz) (Hz) -20 13.560255 255 0.001881 ±0.01 Pass -10 13.560286 286 0.002106 ±0.01 Pass 0 13.560255 255 0.001881 ±0.01 Pass 10 13.560225 225 0.001663 ±0.01 Pass 110 20 13.560225 225 0.001663 ±0.01 Pass 30 13.560195 195 0.001441 ±0.01 Pass 40 13.560195 195 0.001440 ±0.01 Pass 50 13.560195 195 0.001440 ±0.01 Pass Voltage Variations Measured Delta Temp. Voltage Tolerance Limit Result Frequency Frequency (oC) (VAC) (%) (±%) (Pass/Fail) (MHz) (Hz) 93.5 13.56022545 225 0.001663 ±0.01 Pass 20 110 13.56022545 225 0.001663 ±0.01 Pass 126.5 13.56022545 225 0.001663 ±0.01 Pass Page 20 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Report No: T100127102-RP1 FCC ID: E2K-P05G Date of Issue: Feb. 3, 2010 7.3. POWERLINE CONDUCTED EMISSIONS LIMIT For an intentional radiator which is designed to be connected to the public utility (AC) power line, the radio frequency voltage that is conducted back onto the AC power line on any frequency or frequencies within the band 150 kHz to 30 MHz shall not exceed 250 microvolts (The limit decreases linearly with the logarithm of the frequency in the range 0.15 MHz to 0.50 MHz). The limits at specific frequency range is listed as follows: Limits Frequency Range (dBµV) (MHz) Quasi-peak Average 0.15 to 0.50 66 to 56* 56 to 46* 0.50 to 5 56 46 5 to 30 60 50 Compliance with this provision shall be based on the measurement of the radio frequency voltage between each power line (LINE and NEUTRAL) and ground at the power terminals. TEST CONFIGURATION See test photographs attached in Appendix I for the actual connections between EUT and support equipment. TEST PROCEDURE 1. The EUT was placed on a table, which is 0.8m above ground plane. 2. Maximum procedure was performed on the six highest emissions to ensure EUT compliance. 3. Repeat above procedures until all frequency measured were complete. TEST RESULTS The initial step in collecting conducted data is a spectrum analyzer peak scan of the measurement range. Significant peaks are then marked as shown on the following data page, and these signals are then quasi-peaked. Page 21 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Report No: T100127102-RP1 FCC ID: E2K-P05G Date of Issue: Feb. 3, 2010 TEST DATA The initial step in collecting conducted data is a spectrum analyzer peak scan of the measurement range. Significant peaks are then marked as shown on the following data page, and these signals are then quasi-peaked. Operation Mode: Normal Link Test Date: February 1, 2010 Temperature: 20°C Tested by: Bill Cheng Humidity: 58% RH QP AV Corr. QP AV QP AV QP AV Freq. Reading Reading factor Result Result Limit Limit Margin Margin Note (MHz) (dBuV) (dBuV) (dB) (dBuV) (dBuV) (dBuV) (dBuV) (dB) (dB) 2.6964 34.69 26.98 9.75 44.44 36.73 56.00 46.00 -11.56 -9.27 L1 2.8444 35.50 27.84 9.75 45.25 37.59 56.00 46.00 -10.75 -8.41 L1 3.0550 36.69 28.79 9.75 46.44 38.54 56.00 46.00 -9.56 -7.46 L1 3.2725 31.22 24.78 9.75 40.97 34.53 56.00 46.00 -15.03 -11.47 L1 3.4988 33.39 26.30 9.75 43.14 36.05 56.00 46.00 -12.86 -9.95 L1 3.6814 34.47 27.26 9.76 44.23 37.02 56.00 46.00 -11.77 -8.98 L1 4.2739 33.11 27.02 9.79 42.90 36.81 56.00 46.00 -13.10 -9.19 L1 0.8574 25.26 16.64 9.61 34.87 26.25 56.00 46.00 -21.13 -19.75 L2 2.5805 32.64 24.59 9.74 42.38 34.33 56.00 46.00 -13.62 -11.67 L2 2.8043 34.98 27.45 9.74 44.72 37.19 56.00 46.00 -11.28 -8.81 L2 3.0294 35.50 28.07 9.74 45.24 37.81 56.00 46.00 -10.76 -8.19 L2 3.6903 34.74 27.82 9.75 44.49 37.57 56.00 46.00 -11.51 -8.43 L2 4.2957 35.08 28.13 9.78 44.86 37.91 56.00 46.00 -11.14 -8.09 L2 Remark: 1. Measuring frequencies from 0.15 MHz to 30MHz. 2. The emissions measured in frequency range from 0.15 MHz to 30MHz were made with an instrument using Quasi-peak detector and average detector. 3. The IF bandwidth of SPA between 0.15MHz and 30MHz was 10kHz; the IF bandwidth of Test Receiver between 0.15MHz and 30MHz was 9kHz; 4. L1 = Line One (Live Line) / L2 = Line Two (Neutral Line) Page 22 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Report No: T100127102-RP1 FCC ID: E2K-P05G Date of Issue: Feb. 3, 2010 Test Plots Conducted emissions (Line 1) Conducted emissions (Line 2) Page 23 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.


Document Created: 2010-03-03 19:31:47
Document Modified: 2010-03-03 19:31:47
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC