15U22255-E3V1 FCCIC REPORT MPE 16031.pdf

FCC ID: DKN-501CS

RF Exposure Info

Download: PDF
FCCID_2942279

FCC Part 1 Subpart I FCC Part 2 Subpart J RF EXPOSURE REPORT FOR Zigbee Door Sensor MODEL NUMBER: A94 FCC ID: DKN-501CS IC ID: 1707A-501CS REPORT NUMBER: 15U22255-E1V1 ISSUE DATE: 3/3/2016 Prepared for Echostar Technologies, LLC 94 Inverness Terrace East Englewood, CO 80112, U.S.A Prepared by UL VERIFICATION SERVICES INC. 47173 BENICIA STREET FREMONT, CA 94538, U.S.A. TEL: (510) 771-1000 FAX: (510) 661-0888

REPORT NO: 15U22255-E3V1 DATE: 3/3/2016 FCC ID: DKN-501CS IC ID: 1707A-501CS MODEL: A94 Revision History Issue Rev. Date Revisions Revised By V1 3/3/16 Initial Issue C. Vergonio Page 2 of 11 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 15U22255-E3V1 DATE: 3/3/2016 FCC ID: DKN-501CS IC ID: 1707A-501CS MODEL: A94 TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ................................................................................. 4 2. TEST METHODOLOGY ..................................................................................................... 5 3. REFERENCES ................................................................................................................... 5 4. FACILITIES AND ACCREDITATION ................................................................................. 5 5. MAXIMUM PERMISSIBLE RF EXPOSURE ....................................................................... 6 5.1. FCC RULES ................................................................................................................ 6 5.2. IC RULES .................................................................................................................... 7 5.3. EQUATIONS................................................................................................................ 8 5.4. LIMITS AND IC EXEMPTION .....................................................................................10 6. RF EXPOSURE RESULTS ................................................................................................11 Page 3 of 11 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 15U22255-E3V1 DATE: 3/3/2016 FCC ID: DKN-501CS IC ID: 1707A-501CS MODEL: A94 1. ATTESTATION OF TEST RESULTS COMPANY NAME: Echostar Technologies LLC 90 Inverness Circle East Englewood, CO 80112 EUT DESCRIPTION: Zigbee Door Sensor MODEL: A94 SERIAL NUMBER: 2263411-1, 2263411-2 DATE TESTED: December 8-17, 2015 APPLICABLE STANDARDS STANDARD TEST RESULTS FCC PART 1 SUBPART I & PART 2 SUBPART J Pass UL Verification Services Inc. calculated the RF Exposure of the above equipment in accordance with the requirements set forth in the above standards, using test results reported in the test report documents referenced below and/or documentation furnished by the applicant. All indications of Pass/Fail in this report are opinions expressed by UL Verification Services Inc. based on interpretations of these calculations. The results show that the equipment is capable of demonstrating compliance with the requirements as documented in this report. Note: The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. This document may not be altered or revised in any way unless done so by UL Verification Services Inc. and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by UL Verification Services Inc. will constitute fraud and shall nullify the document. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, any agency of the Federal Government, or any agency of any government. Approved & Released For UL Verification Services Inc. By: Calculated By: CHARLES VERGONIO KIYA KENDIDA CONSUMER TECHNOLOGY DICISION CONSUMER TECHNOLOGY DICISION WiSE ENGINEER WiSE LAB ENGINEER UL Verification Services Inc. UL Verification Services Inc. Page 4 of 11 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 15U22255-E3V1 DATE: 3/3/2016 FCC ID: DKN-501CS IC ID: 1707A-501CS MODEL: A94 2. TEST METHODOLOGY All calculations were made in accordance with FCC OET Bulletin 65 Edition 97-01 and IC Safety Code 6. 3. REFERENCES All measurements were made as documented in test report UL Verification Services Inc. 15U22255-E1V1 for operation in the 2.4 GHz band. Output power, Duty cycle and Antenna gain data is excerpted from the applicable test reports. Antenna gain data is excerpted from the applicable test reports. 4. FACILITIES AND ACCREDITATION The test sites and measurement facilities used to collect data are located at 47173 Benicia Street, Fremont, California, USA. UL Verification Services Inc. is accredited by NVLAP, Laboratory Code 200065-0. Page 5 of 11 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 15U22255-E3V1 DATE: 3/3/2016 FCC ID: DKN-501CS IC ID: 1707A-501CS MODEL: A94 5. MAXIMUM PERMISSIBLE RF EXPOSURE 5.1. FCC RULES §1.1310 The criteria listed in Table 1 shall be used to evaluate the environmental impact of human exposure to radio-frequency (RF) radiation as specified in §1.1307(b), except in the case of portable devices which shall be evaluated according to the provisions of §2.1093 of this chapter. Page 6 of 11 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 15U22255-E3V1 DATE: 3/3/2016 FCC ID: DKN-501CS IC ID: 1707A-501CS MODEL: A94 5.2. IC RULES IC Safety Code 6, Section 2.2.1 (a) A person other than an RF and microwave exposed worker shall not be exposed to electromagnetic radiation in a frequency band listed in Column 1 of Table 5, if the field strength exceeds the value given in Column 2 or 3 of Table 5, when averaged spatially and over time, or if the power density exceeds the value given in Column 4 of Table 5, when averaged spatially and over time. Page 7 of 11 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 15U22255-E3V1 DATE: 3/3/2016 FCC ID: DKN-501CS IC ID: 1707A-501CS MODEL: A94 5.3. EQUATIONS POWER DENSITY Power density is given by: S = EIRP / (4 * Pi * D^2) Where S = Power density in mW/cm^2 EIRP = Equivalent Isotropic Radiated Power in mW D = Separation distance in cm Power density in units of mW/cm^2 is converted to units of W/m^2 by multiplying by 10. DISTANCE Distance is given by: D = SQRT (EIRP / (4 * Pi * S)) Where D = Separation distance in cm EIRP = Equivalent Isotropic Radiated Power in mW S = Power density in mW/cm^2 SOURCE-BASED DUTY CYCLE Where applicable (for example, multi-slot cell phone applications) a duty cycle factor may be applied. Source-based time-averaged EIRP = (DC / 100) * EIRP Where DC = Duty Cycle in %, as applicable EIRP = Equivalent Isotropic Radiated Power in W Page 8 of 11 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 15U22255-E3V1 DATE: 3/3/2016 FCC ID: DKN-501CS IC ID: 1707A-501CS MODEL: A94 MIMO AND COLOCATED TRANSMITTERS (IDENTICAL LIMIT FOR ALL TRANSMITTERS) For multiple chain devices, and colocated transmitters operating simultaneously in frequency bands where the limit is identical, the total power density is calculated using the total EIRP obtained by summing the EIRP (in linear units) of each transmitter. Total EIRP = (EIRP1) + (EIRP2) + ... + (EIRPn) where EIRPx = Source-based time-averaged EIRP of chain x or transmitter x The total EIRP is then used to calculate the Power Density or the Distance as applicable. MIMO AND COLOCATED TRANSMITTERS For multiple colocated transmitters operating simultaneously in frequency bands where different limits apply: The Power Density at the specified separation distance is calculated for each transmitter chain or transmitter. The fraction of the exposure limit is calculated for each chain or transmitter as (Power Density of chain or transmitter) / (Limit applicable to that chain or transmitter). The fractions are summed. Compliance is established if the sum of the fractions is less than or equal to one. Page 9 of 11 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 15U22255-E3V1 DATE: 3/3/2016 FCC ID: DKN-501CS IC ID: 1707A-501CS MODEL: A94 5.4. LIMITS AND IC EXEMPTION VARIABLE LIMITS For mobile radio equipment operating in the cellular phone band, the lowest power density limit is calculated using the lowest frequency: 824 MHz / 1500 = 0.55 mW/cm^2 (FCC) 824 MHz / 150 = 5.5 W/m^2 (IC). FIXED LIMITS For operation in the PCS band, the 2.4 GHz band and the 5 GHz bands: From FCC §1.1310 Table 1 (B), the maximum value of S = 1.0 mW/cm^2 From IC Safety Code 6, Section 2.2 Table 5 Column 4, S = 10 W/m^2 INDUSTRY CANADA EXEMPTION RSS-102 Clause 2.5.2 RF exposure evaluation is required if the separation distance between the user and the device’s radiating element is greater than 20 cm, except when the device operates as follows: •below 1.5 GHz and the maximum e.i.r.p. of the device is equal to or less than 2.5 W; •at or above 1.5 GHz and the maximum e.i.r.p. of the device is equal to or less than 5 W. Page 10 of 11 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 15U22255-E3V1 DATE: 3/3/2016 FCC ID: DKN-501CS IC ID: 1707A-501CS MODEL: A94 6. RF EXPOSURE RESULTS In the table(s) below, Power and Gain are entered in units of dBm and dBi respectively and conversions to linear forms are used for the calculations. Single Chain and non-colocated transmitters Band Mode Separatio Output Antenna Duty EIRP FCC Power IC n Distance Peak Gain Cycle Density Power Density Power (cm) (dBm) (dBi) (%) (mW) (mW/cm^2) (W/m^2) 2.4 GHz ZIGBEE 20 5.95 1.25 100.0 5.2 0.001 0.01 Single Chain and non-colocated transmitters Band Mode FCC IC Output Antenna EIRP Duty EIRP Separation Limit Limit Peak Gain Cycle Distance Power (mW/cm^2) (W/m^2) (dBm) (dBi) (dBm) (%) (mW) (cm) 2.4 GHz ZIGBEE 1.00 10.0 5.95 1.25 7.20 100.0 5.2 0.65 Notes: 1) The manufacturer configures output power so that the maximum power, after accounting for manufacturing tolerances, will never exceed the maximum power level measured. 2) The output power in the tables above is the maximum power per chain among various channels and various modes within the specific band. 3) The antenna gain in the tables above is the maximum antenna gain among various channels within the specified band. 4) Radiated test were performed for demonstrating compliance to the conducted emission requirements. END OF REPORT Page 11 of 11 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.


Document Created: 2017-11-22 04:33:50
Document Modified: 2017-11-22 04:33:50
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC