Part 15C report

FCC ID: CWU-HST

Test Report

Download: PDF
FCCID_1763688

TEST REPORT Date: 2012-06-06 Report No.: 60.870.12.012.01F Applicant: AMX LLC 3000 Research Drive Richardson, Tx 75082, USA Description of Samples: Model name: Bluetooth Handset Brand name: AMX Model no.: MXA-HST FCCID: CWU-HST Date Samples Received: 2012-05-10 Date Tested: 2012-05-10 to 2012-06-04 Investigation Requested: FCC Part 15 Subpart C, Section 15.247 Conclusions: The submitted product COMPLIED with the requirements of Federal Communications Commission [FCC] Rules and Regulations Part 15. The tests were performed in accordance with the standards described above and on Section 2.2 in this Test Report. Remarks: ---- Checked by: Approved by:- Ray Cheung Jeff Pong Project Engineer Operation Manager Wireless & Telecom Department Wireless & Telecom Department Page 1 of 32 TUV SUD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.12.012.01F CONTENT: Cover Page 1 of 32 Content Page 2-3 of 32 1.0 General Details 1.1 Test Laboratory Page 4 of 32 1.2 Applicant Details Page 4 of 32 1.3 Equipment Under Test [EUT] Page 5 of 32 1.4 Related Submittal(s) Grants Page 5 of 32 2.0 Technical Details 2.1 Investigations Requested Page 6 of 32 2.2 Test Standards and Results Summary Page 6 of 32 3.0 Test Methodology 3.1 Radiated Emission Page 7 of 32 3.2 Field Strength Calculation Page 7 of 32 3.3 Conducted Emission Page 7 of 32 4.0 Test Results 4.1 Number of Frequency Hopping Page 8 of 32 4.2 20dB Bandwidth Measurement Page 9-10 of 32 4.3 Hopping Channel Carrier Frequency Separation Page 11 of 32 4.4 Average Time of Occupancy Page 12-18 of 32 4.5 Band Edge Measurement Page 19-20 of 32 4.6 Maximum Output Power Page 21-23 of 32 4.7 Out of Band Emissions and Emissions in Restricted Bands Page 24-27 of 32 4.8 Conducted Emission on AC Mains Page 28-30 of 32 Page 2 of 32 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.12.012.01F 5.0 RF Exposure Compliance Requirement Page 31 of 32 6.0 List of Measurement Equipments Page 32 of 32 Appendix A Photos of Test Setup Appendix B External EUT Photos Appendix C Internal EUT Photos Page 3 of 32 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.12.012.01F 1.0 General Details 1.1 Test Laboratory SEM. Test Compliance Service Co. Ltd 3/F, Jinbao Commerce Building, Xin’an Fanshen Road, Bao’an District, Shenzhen. Registration Number: 994117 Tested by: John Zhi 1.2 Applicant Details Applicant AMX LLC 3000 Reseach Drive Richardson, Tx 75082, USA. Manufacturer Foshan Shunde Alford Electronics Co. Ltd. Xinjiao Industrial Park, Daliang, Shunde, Foshan City, Guangdong Province, China Page 4 of 32 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.12.012.01F 1.3 Equipment Under Test [EUT] Description of EUT Product Description: Bluetooth Handset Model No.: MXA-HST Brand Name: AMX FCCID: CWU-HST Rating: - Cradle: .5VDC, 500mA - Handset: 3.7V 640mAh li-ion rechargeable Operated Frequency: 2402 - 2480 MHz No. of Operated Channel: 79 Accessories and Auxiliary Equipments: - Notebook - Bluetooth dongle - AC/DC power adaptor Antenna Type: Omini-directional Antenna Manufacture of Antenna: Misubishi Antenna Gain: 0.5 dBi Antenna Model: N/A General Operation of EUT The EUT is the Bluetooth Handset. FHSS Operation Principle: This module is controlled by Bluetooth microchip to generate Pseudorandom Frequency Hopping Sequence, this module support 79 hopping channels. 1.4 Related Submittal(s) Grants This is a signal application subjected to Certificate Authorization. Page 5 of 32 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.12.012.01F 2.0 Technical Details 2.1 Investigations Requested Perform ElectroMagnetic Interference measurement in accordance with FCC 47CFR [Codes of Federal Regulations] Part 15 and ANSI C63.4: 2003 2.2 Test Standards and Results Summary Tables Test Condition Test Requirement Test Result Pass N/A Number of Frequency Section 15.247 ( a1 ) Hopping 20dB Bandwidth Section 15.247 ( a1 ) Measurement Hopping Channel Carrier Section 15.247 ( a1 ) Frequency Separation Average Time of Section 15.247 ( a1 ) Occupancy Pseudorandom Hopping Section 15.247 ( a1 ) Algorithm Band Edge Measurement Section 15.247 Maximum Output Power Section 15.247 ( b1 ) Out of Band Emission Section 15.247 ( d ) Radiated Emission in Section 15.247 ( d ) Restricted Band Conducted Emission on Section 15.207 AC Mains RF Exposure Section 15.247 ( i ) Antenna Requirement Section 15.203 See note 1 Note 1 : The EUT uses a permanently attached antenna, which in accordance to Section 15.203, is considered sufficient to comply with the provisions of this section. Remark: N/A - Not Applicable Page 6 of 32 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.12.012.01F 3.0 Test Methodology 3.1 Radiated Emission The sample was placed 0.8m above the ground plane on a standard emission test site *. Measurements in both horizontal and vertical polarities were performed. During the test, each emission was maximized by: having the EUT continuously working, investigated all operating modes, rotated about all 3 axis (X, Y & Z) and considered typical configuration to obtain worst position, manipulating interconnecting cables, rotating turntable, varying antenna height from 1m to 4m in both horizontal and vertical polarizations. The emissions worst-case are shown in Test Results of the following pages. 3.2 Field Strength Calculation The field strength at 3 m was established by adding the meter reading of the spectrum analyzer to the factors associated with antenna correction factor, cable loss, preamplifiers and filter attenuation. The equation is expressed as follow: FS = R + System Factor System Factor = AF + CF + FA – PA Where FS = Net Field Strength in dBuV/m at 3 meters. R = Reading of Spectrum Analyzer / Test Receiver in dBuV. AF = Antenna Factor in dB. CF = Cable Attenuation Factor in dB. FA = Filter Attenuation Factor in dB. PA = Preamplifier Factor in dB. FA and PA are only be used for the measuring frequency above 1 GHz. 3.3 Conducted Emissions The test was performed in accordance with ANSI C63.4: 2003, with the following: initial measurements were performed in peak and average detection modes on the live line of personal computer, any emissions recorded within 30dB of the relevant limit lines were re-measured using quasi-peak and average detection on the live and neutral lines with the worst case recorded in the table of results. Page 7 of 32 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.12.012.01F 4.0 Test Results 4.1 Number of Hopping Frequency Test Requirement: FCC part 15 section 15.247 (a1)(iii) Test Date: 2012-05-31 Mode of Operation: Transmitting mode. Detector Function: Max Hold Result: PASS Measured Result : Operating Channel Frequency in sequence: 2402 ; 2403 ; 2404 ; 2405 ; 2406 ; 2407 ; 2408 ; 2409 ; 2410 ; 2411 ; 2412 ; 2413 ; 2414 ; 2415 ; 2416 ; 2417 ; 2418 ; 2419 ; 2420 ; 2421 ; 2422 ; 2423 ; 2424 ; 2425 ; 2426 ; 2427 ; 2428 ; 2429 ; 2430 ; 2431 ; 2432 ; 2433 ; 2434 ; 2435 ; 2436 ; 2437 ; 2438 ; 2439 ; 2440 ; 2441 ; 2442 ; 2443 ; 2444 ; 2445 ; 2446 ; 2447 ; 2448 ; 2449 ; 2450 ; 2451 ; 2452 ; 2453 ; 2454 ; 2455 ; 2456 ; 2457 ; 2458 ; 2459 ; 2460 ; 2461 ; 2462 ; 2463 ; 2464 ; 2465 ; 2466 ; 2467 ; 2468 ; 2469 ; 2470 ; 2471 ; 2472 ; 2473 ; 2474 ; 2475 ; 2476 ; 2477 ; 2478 ; 2479 ; 2480 Limit for Number of Hopping Channel [ Section 15.247 (a1)(iii) ] At least 15 non-overlapping channels for 2400-2483.5MHz. Result data graph shows the number of operation channels: Page 8 of 32 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.12.012.01F 4.2 20dB Bandwidth Measurement Test Requirement: FCC part 15 section 15.247 (a1) Test Date: 2012-05-31 Mode of Operation: Transmitting mode. Detector Function: Max Hold Test Setup: The bandwidth is measured at an amplitude level reduced from the reference level by a specified ratio. The reference level is the level of the highest amplitude signal observed from the transmitter at the fundamental frequency. Once the reference level is established, the equipment is conditioned with typical modulating signal to produce the worst-case (i.e. the widest) bandwidth. Channel Measured frequency 20dB Bandwidth (MHz) (MHz) Lowest 2.402 0.910 Middle 2.441 0.923 Highest 2.480 0.898 This result is used for checking the hopping channel carrier frequencies separation. Result data graph shows 20 dB bandwidth, CF = 2.402GHz, BW = 0.910MHz Page 9 of 32 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.12.012.01F Result data graph shows 20 dB bandwidth, CF = 2.441GHz, BW = 0.923MHz Result data graph shows 20 dB bandwidth, CF = 2.480GHz, BW = 0.898MHz Page 10 of 32 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.12.012.01F 4.3 Hopping Channel Carrier Frequency Separation Test Requirement: FCC part 15 section 15.247 (a1) Test Date: 2012-05-31 Mode of Operation: Transmitting mode. Detector Function: Max Hold Result: PASS Measured Result : Refer to the delta marker, the frequency separation between two adjacent channels is 1.005 MHz, therefore, the requirement of channel separated by a two-third of the 20dB bandwidth of the hopping channel is applied. According to the test result shown in section 4.2, the maximum 20dB bandwidth is 0.923 MHz, so the hopping channel separation of this EUT is found to comply with the requirement. Limits for Hopping Channel Separation [ Section 15.247 (a1) ]: Frequency hopping systems shall have hopping channel carrier frequencies separated by a minimum of 25kHz or the 20dB bandwidth of the hopping channel, whichever is greater. Alternatively, frequency hopping systems operating in the 2400-2483.5MHz band may have hopping channel carrier frequencies that are separated by 25kHz or two-thirds of the 20dB bandwidth of the hopping channel, whichever is greater. Result data graph shows the channel separation Page 11 of 32 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.12.012.01F 4.4 Average Time of Channel Occupancy Test Requirement: FCC part 15 section 15.247 (a1)(iii) Test Date: 2012-05-31 Mode of Operation: Transmitting mode. Detector Function: Zero span Result : PASS Measured Result : Observing period = 79 x 0.4s = 31.6s Measure the maximum time duration of one single pulse; DH5 Packet permit maximum : = 1600 / 79 /6 = 3.37 hop/s in each channel (5 times slots Rx, 1 times slot Tx) Transmission Times within observing period = 3.37 x 31.6 = 106.6 DH3 Packet permit maximum : = 1600 / 79 /4 = 5.06 hop/s in each channel (3 times slots Rx, 1 times slot Tx) Transmission Times within observing period = 5.06 x 31.6 = 160 DH1 Packet permit maximum : = 1600 / 79 /2 = 10.12 hop/s in each channel (1 times slots Rx, 1 times slot Tx) Transmission Times within observing period = 10.12 x 31.6 = 320 Dell Time = Pulse Duration x Length of Transmission time Result shown as below table and data graph. Limits for Average Time of Occupancy [ Section 15.247 (a1)(iii) ]: The average time of occupancy on any channel shall not be greater than 0.4 second within a period of 0.4 seconds multiplied by the number of hopping channels employed. Page 12 of 32 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.12.012.01F Result data graph shows the pulses duration of DH5 Package Result data graph shows the pulses duration of DH3 Package Page 13 of 32 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.12.012.01F Result data graph shows the pulses duration of DH1 Package The table shown the result of Lowest Channel at 1Mbps Data Frequency Pulse Duration Dwell time Limit Packet (MHz) (ms) (ms) (ms) DH5 2402 2.87 305.9 400 DH3 2402 1.64 262.4 400 DH1 2402 0.39 124.8 400 Page 14 of 32 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.12.012.01F Result data graph shows the pulses duration of DH5 Package Result data graph shows the pulses duration of DH3 Package Page 15 of 32 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.12.012.01F Result data graph shows the pulses duration of DH1 Package The table shown the result of Middle Channel at 1Mbps Data Frequency Pulse Duration Dwell time Limit Packet (MHz) (ms) (ms) (ms) DH5 2441 2.89 308.1 400 DH3 2441 1.65 264.0 400 DH1 2441 0.39 124.8 400 Page 16 of 32 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.12.012.01F Result data graph shows the pulses duration of DH5 Package Result data graph shows the pulses duration of DH3 Package Page 17 of 32 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.12.012.01F Result data graph shows the pulses duration of DH1 Package The table shown the result of Highest Channel at 1Mbps Data Frequency Pulse Duration Dwell time Limit Packet (MHz) (ms) (ms) (ms) DH5 2480 2.88 307.0 400 DH3 2480 1.64 262.4 400 DH1 2480 0.39 124.8 400 Page 18 of 32 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.12.012.01F 4.5 Band Edge Measurement Test Requirement: FCC part 15 section 15.247 Test Date: 2012-05-31 Mode of Operation: Transmitting mode. Detector Function: Max Hold Result: PASS Measured Result : Refer to the data graph, it shows the frequency of lower band edge and upper band edge separately. Limits of Band Edge for Carrier Frequencies Operated within the Bands [ Section 15.247 ]: The carrier frequencies should operate within 2400-2483.5MHz. Result data graph shows the frequency of lower channel. Page 19 of 32 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.12.012.01F Result data graph shows the frequency of upper channel. Page 20 of 32 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.12.012.01F 4.6 Maximum Output Power Test Requirement: FCC part 15 section 15.247 (b1) Test Method: ANSI C63.4:2003 Test Date: 2012-05-31 Mode of Operation: Transmitting mode. Detector Function: Peak Measurement BW: RBW 1MHz ; VBW 1MHz Test Setup: = Result : PASS 1M bps Frequency Peak Output Power Limit (MHz) (dBm) (W) (dBm) (W) Lowest Channel : 2402 2.76 0.0019 21 0.125 Middle Channel : 2441 1.11 0.0013 21 0.125 Highest Channel : 2480 -1.77 0.0007 21 0.125 Limits for Maximum Output Power [ Section 15.247 (a1)(iii) ]: For frequency hopping systems employing at least 75 hopping channels: 1 Watt For all other frequency hopping systems in the 2400-2483.5 MHz band: 0.125 Watts Page 21 of 32 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.12.012.01F Result data graph shows the frequency of lowest channel 1Mbps. Result data graph shows the frequency of middle channel 1Mbps. Page 22 of 32 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.12.012.01F Result data graph shows the frequency of highest channel 1Mbps. Page 23 of 32 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.12.012.01F 4.7 Out of Band Emissions and Emissions in Restricted Bands Test Requirement: FCC part 15 section 15.247 (d ) Test Method: ANSI C63.4:2003 Test Date: 2012-05-31 Mode of Operation: Transmiting mode Detector Function: Peak Measurement BW: RBW 100KHz ; VBW 300KHz Test Setup: Semi-Anechoic Chamber Computer 3m Pre-Amplifier EUT Turntable Ground Plane Measuring Receiver Page 24 of 32 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.12.012.01F Result : PASS Out of Frequency Band Emissions: For out of band emissions that are close to or exceed 20dB attenuation requirement, and emission falls into restricted band, radiated emission was performed in order to show compliance with the general radiated emission requirement. Result Summary: Refer to the data graph for the emission data graph, result shows that the significant emissions detected are with more than 20dB below that in the 100kHz bandwidth within the band that contains the highest level of the desired power. Limits for Out of Frequency Band Emission [ Section 15.247 (d) ]: In any 100kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100kHz bandwidth within the band that contains the highest level of the desired power. Attenuation below the general limits specified in Section 15.209(a) is not required. Limit for Radiated Emission Falling in Restricted Bands [ Section 15.209 ]: Field Strength Field Strength Frequency (MHz) [ V/m] [dB V/m] 30-88 100 40.0 88-216 150 43.5 216-960 200 46.0 Above 960 500 54.0 Radiated emissions, which fall in the restricted bands, as defined in Section 15.205(a), must also comply with the radiated emission limits specified in Section 15.209. The emission limits shown in the above table are based on measurement employing a CISPR quasi-peak detector and above 1000MHz are based on measurements employing an average detector. Page 25 of 32 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.12.012.01F Result : PASS All Emission and Emissions Fall into Restricted Band were recorded as below: 1M bps Radiated Emissions Emissions E-Field Reading System Field Limit Delta to Frequency Polarity Factor strength at Limit 3m MHz dBuV/m dB dBuV/m dBuV/m dBuV/m Lowest Channel PK 4806.00 V 60.86 -3.92 56.94 74.00 -17.06 AV V 43.57 -3.92 39.65 54.00 -14.35 Middle Channel PK 4872.00 V 60.78 -3.74 57.04 74.00 -16.96 AV V 43.06 -3.74 39.32 54.00 -14.68 Highest Channel PK 4960.00 V 57.54 -3.48 54.06 74.00 -19.94 PK V 42.04 -3.48 38.56 54.00 -15.44 Spurious Emissions QP 30.00 V 22.30 8.04 30.34 40.00 -9.66 QP 46.02 V 20.59 7.85 28.44 40.00 -11.56 QP 374.62 V 21.45 10.63 32.08 46.00 -13.92 QP 32.41 H 24.88 8.44 33.32 40.00 -6.68 QP 203.52 H 26.86 4.87 31.73 43.50 -11.77 QP 755.39 H 16.85 17.48 34.33 46.00 -11.67 Refer to the data graph shows the worst case channel’s emission data graph from 30MHz- 1GHz. Only background noise was measured from 1GHz-26GHz except related to the operation frequency. Result Summary: 1) Communication mode: All other emissions are more than 20dB below FCC part 15.209 limit. 2) No further spurious emissions found between 30 MHz and lowest internal used/generated frequency and from 30MHz to 1GHz. Remarks: 1. “ * ” Radiated emissions which fall in the restricted bands as defined in Section 15.205(a). 2. Emission level with more than 20dB below the FCC required limit is not mentioned in table. 3. Delta to Limit = Field strength (dBµV/m) – Limit (dBµV/m). 4. Calculated measurement uncertainty: 9kHz -30MHz: 1.8dB. 30MHz -1GHz: 5.2dB. 1GHz -18GHz: 5.1dB. Page 26 of 32 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.12.012.01F Radiated emission data graph (Vertical polarization, 30MHz-1GHz) Remark: Only background noise was measured from 1GHz-26GHz except related to the operation frequency. Radiated emission data graph (Horizontal polarization, 30MHz-1GHz) Remark: Only background noise was measured from 1GHz-26GHz except related to the operation frequency. Page 27 of 32 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.12.012.01F 4.8 Conducted Emissions (0.15MHz to 30MHz) Test Requirement: FCC part 15 Section 15.207 Class B Test Method: ANSI C63.4:2003 Test Date: 2012-05-31 Mode of Operation: Charging mode Detector Function: CISPR Quasi Peak Measurement BW: 5 kHz Results: PASS Refer the result table and data graph. Limits for Conducted Emission [ Section 15.207]: Frequency Range Quasi-Peak Limit Average Limit [MHz] [dB V] [dB V] 0.15-0.5 66 to 56* 56 to 46* 0.5-5.0 56 46 5.0-30.0 60 50 * Decreases with the logarithm of the frequency. Remarks: Calculated measurement uncertainty: 2.8dB Page 28 of 32 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.12.012.01F Result data graph shows the conducted emission (Live). Refer to the following table for the result details: Frequency Detector Phase Result Limit Margin (MHz) (QP/AV) (dBµV) (dBµV) 0.466 QP L 32.03 56.58 -24.55 0.466 AV L 21.87 46.58 -24.71 0.778 AV L 22.67 46.00 -23.33 23.982 AV L 29.28 50.00 -20.72 Page 29 of 32 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.12.012.01F Result data graph shows the conducted emission (Neutral). Refer to the following table for the result details: Frequency Detector Phase Result Limit Margin (MHz) (QP/AV) (dBµV) (dBµV) 0.354 QP N 35.58 58.86 -23.28 0.574 QP N 31.36 56.00 -24.64 0.778 AV N 22.62 46.00 -23.38 23.982 AV N 30.09 50.00 -19.91 Page 30 of 32 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.12.012.01F 5.0 RF Exposure Compliance Requirement Test Requirement: FCC part 15 section 15.247 (i) Test Method: FCC part 15 section 1.1307 (b1) OET Bulletin 65, Edition 01-01 Results: PASS Systems operation under the provision of this section shall be operated in a manner that ensures the public is not exposed to radio frequency energy levels in excess of the Commission’s guideline, Frequency Band: 2.402GHz ~2.480GHz Portable (< 20cm separation ) Device Category: Mobile ( >20cm separation ) Others : Occupational/ Controlled exposure Exposure Classification: General Population / Uncontrolled exposure Max. Output Power 0.0019W Antenna Gain 0.5 dBi ( Numeric gain: 1.12 ) MPE Evaluation Evaluation Applied: SAR Evaluation SAR Evaluation : Output Power 60 / f(GHz) mW For 2.480 GHz device requirement: Output Power 24.2mW Therefore, no SAR evaluation required since the transmitter power is below < 24mW Page 31 of 32 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.12.012.01F 6.0 List of Measurement Equipment Radiated Emission and Bandwidth Emissions Description Manufacturer Model no. Serial no. CAL due Spectrum Analyzer Agilent E4402B US41192821 27 Mar 2013 Moisture Test Chamber GONGWEN GDS-150 SEMT-0013 15 Jul 2012 DC Power Supply LW APR-3003 N/A 15 Jul 2012 Specturm Analyzer Agilent E4402B US41192821 27 Mar 2013 Moisture Test Chamber GONGWEN GDS-150 SEMT-0013 15 Jul 2012 Spectrum Analyzer R&S FSP30 836079/035 27 Mar 2013 Positioning Controller C&C CC-C-1F N/A 19 Dec 2012 RF Switch EM EMSW18 SW060023 19 Dec 2012 Pre-amplifier Agilent 8447F 3113A06717 27 Mar 2013 Compliance Pre-amplifier PAP-1G18 24002 27 Mar 2013 Direction Trilog Broadband Antenna SCHWARZBECK VULB9163 9163-333 24 Feb 2013 Horn Antenna ETS 3117 00086197 24 Feb 2013 Anechoic chamber Albatross Project MCDC --- 19 Mar 2013 Line Conducted Description Manufacturer Model no. Serial no. CAL due EMI TEST RECEIVER Rohde & Schwarz ESPI 101611 27 Mar 2013 L.I.S.N Schwarzbeck NSLK8126 8126-224 27 Mar 2013 Pulse Limiter Rohde & Schwarz ESH3-Z2 100911 27 Mar 2013 AMN EMCO 3825/2 11967C 27 Mar 2013 N/A Not Applicable or Not Available Page 32 of 32 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong


Document Created: 2012-08-09 17:14:27
Document Modified: 2012-08-09 17:14:27
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC