5G WIFI Declaration

FCC ID: CNFSPTM1

Cover Letter(s)

Download: PDF
FCCID_3905136

GoPro, Inc. 3000 Clearview Way, San Mateo, CA 94402, USA SOFTWARE SECURITY DECLARATION FOR U-NII DEVICES Product: Camera, FCC ID: CNFSPTM1, KDB 594280 D02 U-NII Device Security v01r03 SOFTWARE SECURITY DESCRIPTION 1. Describe how any software/firmware updates The firmware updates are published for elements than can affect the device’s RF through the GoPro site. Updates can also parameters will be obtained, downloaded, be done through the GoPro IOS and validated and installed. For software that is Android APPs. Product registration with accessed through manufacturer’s website or serial number is required before FW device’s management system, describe the updates are downloaded. different levels of security as appropriate. 2. Describe the RF parameters that are modified The RF parameters/limits are stored in a by any software/firmware without any separate part of the non-volatile storage General hardware changes. Are these parameters in and not updated or changed with the Description some way limited such that any other firmware updates. software/firmware changes will not allow the device to exceed the authorized RF characteristics? 3. Describe in detail the authentication protocols There are currently no authentication that are in place to ensure that the source of protocols in place to check for a valid the RF-related software/firmware is valid. firmware outside of product registration Describe in detail how the RF-related software and serial number. is protected against modification. 4. Describe in detail any encryption methods n/a used to support the use of legitimate RF- related software/firmware. 5. For a device that can be configured as a This device is only a client in 5 GHz master and client (with active or passive operation and does not operate as master. scanning), explain how the device ensures compliance for each mode? In particular if the device acts as master in some band of operation and client in another; how is compliance ensured in each band of operation? QA-FR-431-C Page 1 of 4 06/17/2016 KH

GoPro, Inc. 3000 Clearview Way, San Mateo, CA 94402, USA 1. Explain if any third parties have the capability Third parties do not have the capability to to operate a U.S.-sold device on any other change radio parameters or country regulatory domain, frequencies, or in any domains. manner that may allow the device to operate in violation of the device’s authorization if activated in the U.S. 2. Describe, if the device permits third-party This device does not permit third-party software or firmware installation, what software or firmware installation and only mechanisms are provided by the manufacturer the permitted person can update the to permit integration of such functions while software or firmware via special ensuring that the RF parameters of the device command. cannot be operated outside its authorization for operation in the U.S. In the description include what controls and/or agreements are Third-Party in place with providers of third-party Access Control functionality to ensure the devices’ underlying RF parameters are unchanged and how the manufacturer verifies the functionality. 3. For Certified Transmitter modular devices, N/A – Transmitter Is integrated into the describe how the module grantee ensures that device and is not a module. host manufacturers fully comply with these software security requirements for U-NII devices. If the module is controlled through driver software loaded in the host, describe how the drivers are controlled and managed such that the modular transmitter RF parameters are not modified outside the grant of authorization. 1. Describe the user configurations The UI is accessible to anyone using the permitted through the UI. If device. different levels of access are permitted for professional installers, USER system integrators or end-users, CONFIGURATION a) the describe What parameters are viewable and differences. User can select the working band of the GUIDE configurable by different parties? WIFI module: 2.4G or 5GHz. QA-FR-431-C Page 2 of 4 06/17/2016 KH

GoPro, Inc. 3000 Clearview Way, San Mateo, CA 94402, USA b) What parameters are accessible or This device is not subject to professional modifiable to the professional installation installer or system integrators? i) Are the parameters in some way N/A limited, so that the installers will not enter parameters that exceed those authorized? ii) What controls exist that the user N/A cannot operate the device outside its authorization in the U.S.? QA-FR-431-C Page 3 of 4 06/17/2016 KH

GoPro, Inc. 3000 Clearview Way, San Mateo, CA 94402, USA c) What parameters are accessible or User can select the working band of modifiable by the end-user? the WIFI module: 2.4G or 5GHz. i) Are the parameters in some The built in regulatory settings cannot way limited, so that the be changed by the end-user. installers will not enter parameters that exceed those authorized? ii) What controls exist that the There are no restrictions on operating user cannot operate the the device outside of US. device outside its authorization in the U.S.? d) Is the country code factory set? Can it The country code is factory set and can be changed in the UI? not be changed in the UI USER e) What are the default parameters At each start up the factory configured CONFIGURATIO N GUIDE (cont.) when the device is restarted? country code and antenna gain are read from non-volatile memory 2. Can the radio be configured in bridge or Not supported mesh mode? If yes, an attestation may be required. Further information is available in KDB Publication 905462 D02. 3. For a device that can be configured as a NA – Device is only a client in 5 GHz master and client (with active or passive operation scanning), if this is user configurable, describe what controls exist, within the UI, to ensure compliance for each mode. If the device acts as a master in some bands and client in others, how is this configured to ensure compliance? 4. For a device that can be configured as NA – Device is only a client in 5 GHz different types of access points, such as operation point-to- point or point-to-multipoint, and use different types of antennas, describe what controls exist to ensure compliance with applicable limits and the proper antenna is used for each mode of operation. (See Section 15.407(a)) QA-FR-431-C Page 4 of 4 06/17/2016 KH


Document Created: 2018-06-22 18:42:39
Document Modified: 2018-06-22 18:42:39
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC