Test Report

FCC ID: CFS8DLRCHS5200W

Test Report

Download: PDF
FCCID_3688009

FCC Test Report Report No.: RF171006C01-5 FCC ID: CFS8DLRCHS5200W Test Model: RCHS5200W Received Date: Oct. 06, 2017 Test Date: Oct. 30 ~ Dec. 05, 2017 Issued Date: Dec. 06, 2017 Applicant: Honeywell International Inc. Address: 2 Corporate Center Drive Melville NY 11747 United States Of America Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN (R.O.C.) FCC Registration: 788550 Designation Number: TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF171006C01-5 Page No. 1 / 25 Report Format Version: 6.1.1

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity...................................................................................................................... 4 2 Summary of Test Results ..................................................................................................................... 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Modification Record ............................................................................................................................ 5 3 General Information .............................................................................................................................. 6 3.1 General Description of EUT ................................................................................................................ 6 3.2 Description of Test Modes ................................................................................................................... 6 3.2.1 Test Mode Applicability and Tested Channel Detail............................................................................. 7 3.3 Description of Support Units ............................................................................................................... 8 3.3.1 Configuration of System under Test .................................................................................................... 8 3.4 General Description of Applied Standards .......................................................................................... 8 4 Test Types and Results ........................................................................................................................ 9 4.1 Radiated Emission and Bandedge Measurement............................................................................... 9 4.1.1 Limits of Radiated Emission and Bandedge Measurement ................................................................ 9 4.1.2 Test Instruments ................................................................................................................................ 10 4.1.3 Test Procedures.................................................................................................................................. 11 4.1.4 Deviation from Test Standard ............................................................................................................. 11 4.1.5 Test Set Up ........................................................................................................................................ 12 4.1.6 EUT Operating Conditions................................................................................................................. 13 4.1.7 Test Results ....................................................................................................................................... 14 4.2 Conducted Emission Measurement .................................................................................................. 20 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 20 4.2.2 Test Instruments ................................................................................................................................ 20 4.2.3 Test Procedures................................................................................................................................. 21 4.2.4 Deviation from Test Standard ............................................................................................................ 21 4.2.5 Test Setup .......................................................................................................................................... 21 4.2.6 EUT Operating Conditions................................................................................................................. 21 4.2.7 Test Results ....................................................................................................................................... 22 5 Pictures of Test Arrangements .......................................................................................................... 24 Appendix – Information on the Testing Laboratories ................................................................................ 25 Report No.: RF171006C01-5 Page No. 2 / 25 Report Format Version: 6.1.1

Release Control Record Issue No. Description Date Issued RF171006C01-5 Original release Dec. 06, 2017 Report No.: RF171006C01-5 Page No. 3 / 25 Report Format Version: 6.1.1

1 Certificate of Conformity Product: Smart Home Security Base Station Brand: Honeywell Test Model: RCHS5200W Sample Status: Engineering sample Applicant: Honeywell International Inc. Test Date: Oct. 30 ~ Dec. 05, 2017 Standards: 47 CFR FCC Part 15, Subpart C (Section 15.249) ANSI C63.10:2013 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: Dec. 06, 2017 Pettie Chen / Senior Specialist Approved by : , Date: Dec. 06, 2017 Ken Liu / Senior Manager Report No.: RF171006C01-5 Page No. 4 / 25 Report Format Version: 6.1.1

2 Summary of Test Results 47 CFR FCC Part 15, Subpart C (Section 15.249) FCC Test Item Result Remarks Clause Meet the requirement of limit. 15.207 AC Power Conducted Emission Pass Minimum passing margin is -14.38dB at 0.34560MHz. Radiated Emission Test Band Edge Measurement 15.209 Meet the requirement of limit. Limit: 50dB less than the peak value 15.249 Pass Minimum passing margin is of fundamental frequency or meet 15.249 (d) -2.6dB at 908.40MHz. radiated emission limit in section 15.209 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: Expanded Uncertainty Measurement Frequency (k=2) (±) Conducted Emissions at mains ports 150kHz ~ 30MHz 2.94 dB 30MHz ~ 200MHz 3.59 dB Radiated Emissions up to 1 GHz 200MHz ~1000MHz 3.60 dB 1GHz ~ 18GHz 2.29 dB Radiated Emissions above 1 GHz 18GHz ~ 40GHz 2.29 dB 2.2 Modification Record There were no modifications required for compliance. Report No.: RF171006C01-5 Page No. 5 / 25 Report Format Version: 6.1.1

3 General Information 3.1 General Description of EUT Product Smart Home Security Base Station Brand Honeywell Test Model RCHS5200W Sample Status Engineering sample Power Supply Rating 12Vdc (adapter) Modulation Type GFSK Operating Frequency 908.4 ~ 916MHz Number of Channel 3 Antenna Type Coupling antenna with 1.8dBi gain Antenna Connector NA Accessory Device Adapter Cable Supplied NA Note: 1. The EUT consumes power from the following adapter. Adapter Brand Asian Power Devices Inc. Model WA-30J12FU Input Power 100-240Vac~50-60Hz, 0.9A Max Output Power 12Vdc/ 2.5A Power Line 1.5m non-shielded cable with one core 2. The above EUT information is declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or User's Manual. 3.2 Description of Test Modes 3 channels are provided to this EUT: Channel Freq. (MHz) 1 908.4 2 908.42 3 916.0 Report No.: RF171006C01-5 Page No. 6 / 25 Report Format Version: 6.1.1

3.2.1 Test Mode Applicability and Tested Channel Detail EUT APPLICABLE TO CONFIGURE DESCRIPTION MODE RE1G RE<1G PLC - √ √ √ - Where RE1G: Radiated Emission above 1GHz & RE<1G: Radiated Emission below 1GHz Bandedge Measurement PLC: Power Line Conducted Emission Note: 1. The antenna had been pre-tested on the positioned of each 3 axis. The worst cases were found when positioned on Z-plane. Radiated Emission Test (Above 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT CONFIGUURE MODE AVAILABLE CHANNEL TESTED CHANNEL MODULATION TYPE - 1 to 3 1, 3 GFSK Radiated Emission Test (Below 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT CONFIGUURE MODE AVAILABLE CHANNEL TESTED CHANNEL MODULATION TYPE - 1 to 3 1, 3 GFSK Power Line Conducted Emission Test: Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT CONFIGUURE MODE AVAILABLE CHANNEL TESTED CHANNEL MODULATION TYPE - 1 to 3 1 GFSK Test Condition: APPLICABLE TO ENVIRONMENTAL CONDITIONS INPUT POWER TESTED BY 25deg. C, 66%RH RE1G 120Vac, 60Hz James Yang, Adair Peng 23deg. C, 66%RH RE<1G 25deg. C, 66%RH 120Vac, 60Hz Greg Lin, James Yang PLC 25deg. C, 60%RH 120Vac, 60Hz Han Wu Report No.: RF171006C01-5 Page No. 7 / 25 Report Format Version: 6.1.1

3.3 Description of Support Units The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. ID Product Brand Model No. Serial No. FCC ID Remarks A. Notebook ASUS P2420L FCNXCV16385351D FCC DoC Approved - Note: 1. All power cords of the above support units are non-shielded (1.8m). Shielding ID Descriptions Qty. Length (m) Cores (Qty.) Remarks (Yes/No) 1. Type C to USB cable 1 1.0 - 0 - Note: The core(s) is(are) originally attached to the cable(s). 3.3.1 Configuration of System under Test EUT (1) Adapter (EUT) Type C Notebook (A) 3.4 General Description of Applied Standards The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C (15.249) ANSI C63.10-2013 All test items have been performed and recorded as per the above standards. Note: The EUT has been verified to comply with the requirements of FCC Part 15, Subpart B, Class B (DoC). The test report has been issued separately. Report No.: RF171006C01-5 Page No. 8 / 25 Report Format Version: 6.1.1

4 Test Types and Results 4.1 Radiated Emission and Bandedge Measurement 4.1.1 Limits of Radiated Emission and Bandedge Measurement The field strength of emissions from intentional radiators operated within these frequency bands shall comply with the following: Fundamental Field Strength of Fundamental Field Strength of Harmonics Frequency (millivolts/meter) (microvolts/meter) 902 ~ 928 MHz 50 500 2400 ~ 2483.5 MHz 50 500 5725 ~ 5875 MHz 50 500 24 ~ 24.25 GHz 250 2500 Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated emission limits as below table, whichever is the lesser attenuation Frequencies Field Strength Measurement Distance (meters) (MHz) (microvolts/meter) 0.009 ~ 0.490 2400/F(kHz) 300 0.490 ~ 1.705 24000/F(kHz) 30 1.705 ~ 30.0 30 30 30 ~ 88 100 3 88 ~ 216 150 3 216 ~ 960 200 3 Above 960 500 3 Note: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF171006C01-5 Page No. 9 / 25 Report Format Version: 6.1.1

4.1.2 Test Instruments Description & Model No. Serial No. Cal. Date Cal. Due Manufacturer Test Receiver N9038A MY55420137 Mar. 27, 2017 Mar. 26, 2018 KEYSIGHT Spectrum Analyzer FSP40 100269 May 11, 2017 May 10, 2018 ROHDE & SCHWARZ BILOG Antenna VULB9168 9168-148 Dec. 28, 2016 Dec. 27, 2017 SCHWARZBECK HORN Antenna BBHA 9120 D 9120D-1169 Dec. 27, 2016 Dec. 26, 2017 SCHWARZBECK HORN Antenna BBHA 9170 BBHA9170241 Dec. 14, 2016 Dec. 13, 2017 SCHWARZBECK Loop Antenna EM-6879 269 Aug. 11, 2017 Aug. 10, 2018 EMCI Preamplifier 8449B 3008A01638 Feb. 22, 2017 Feb. 21, 2018 Agilent Preamplifier 8447D 2944A10638 Aug. 08, 2017 Aug. 07, 2018 Agilent RF signal cable CABLE-CH9-02 SUCOFLEX 104 Aug. 08, 2017 Aug. 07, 2018 HUBER+SUHNER (248780+MY13377) RF signal cable SUCOFLEX 104 CABLE-CH9-(250795/4) Aug. 08, 2017 Aug. 07, 2018 HUBER+SUHNER RF signal cable 8D-FB Cable-CH9-01 Aug. 01, 2017 Jul. 31, 2018 Woken Software ADT_Radiated_ NA NA NA BV ADT V7.6.15.9.4 Antenna Tower 2070/2080 512.835.4684 NA NA EMCO Turn Table 2087-2.03 NA NA NA EMCO Antenna Tower &Turn AT100 AT93021705 NA NA BV ADT Turn Table TT100 TT93021705 NA NA BV ADT Turn Table Controller SC100 SC93021705 NA NA BV ADT High Speed Peak Power ML2495A 0824012 Aug. 18, 2017 Aug. 17, 2018 Meter Power Sensor MA2411B 0738171 Aug. 18, 2017 Aug. 17, 2018 Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in HwaYa Chamber 9. 3. The horn antenna and preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 4. The IC Site Registration No. is IC 7450F-9. Report No.: RF171006C01-5 Page No. 10 / 25 Report Format Version: 6.1.1

4.1.3 Test Procedures For Radiated emission below 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter chamber room. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. Both X and Y axes of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Quasi-Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. NOTE: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 9kHz at frequency below 30MHz. For Radiated emission above 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters (for 30MHz ~ 1GHz) / 1.5 meters (for above 1GHz) above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is ≥ 1/T (Duty cycle < 98%) or 10Hz (Duty cycle ≥ 98%) for Average detection (AV) at frequency above 1GHz. 4. All modes of operation were investigated and the worst-case emissions are reported. 4.1.4 Deviation from Test Standard No deviation. Report No.: RF171006C01-5 Page No. 11 / 25 Report Format Version: 6.1.1

4.1.5 Test Set Up For Radiated emission below 30MHz 1m EUT& 3m Support Units Turn Table 80cm Ground Plane Test Receiver For Radiated emission 30MHz to 1GHz Ant. Tower 1-4m Variable EUT& 3m 10m Support Units Turn Table 80cm Ground Plane Test Receiver Report No.: RF171006C01-5 Page No. 12 / 25 Report Format Version: 6.1.1

For Radiated emission above 1GHz Ant. Tower 1-4m Variable EUT& 3m Support Units Turn Table Absorber 150cm Ground Plane Test Receiver For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT Operating Conditions a. Connected the EUT and a notebook via a type C to USB cable and placed them on the testing table. b. The notebook ran a test program to enable EUT under transmission condition continuously at specific channel frequency. Report No.: RF171006C01-5 Page No. 13 / 25 Report Format Version: 6.1.1

4.1.7 Test Results CHANNEL TX Channel 1 DETECTOR Quasi-Peak (QP) FREQUENCY RANGE 30MHz ~ 1GHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *908.40 91.1 QP 94.0 -2.9 1.45 H 230 65.3 25.8 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *908.40 91.4 QP 94.0 -2.6 1.61 V 148 65.6 25.8 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF171006C01-5 Page No. 14 / 25 Report Format Version: 6.1.1

CHANNEL TX Channel 3 DETECTOR Quasi-Peak (QP) FREQUENCY RANGE 30MHz ~ 1GHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *916.00 90.9 QP 94.0 -3.1 1.46 H 231 64.8 26.1 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *916.00 89.3 QP 94.0 -4.7 1.52 V 105 63.2 26.1 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF171006C01-5 Page No. 15 / 25 Report Format Version: 6.1.1

Above 1GHz Data CHANNEL TX Channel 1 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 #1816.00 51.1 PK 74.0 -22.9 1.16 H 309 57.0 -5.9 2 #1816.00 40.0 AV 54.0 -14.0 1.16 H 309 45.9 -5.9 3 2725.00 43.7 PK 74.0 -30.3 3.47 H 144 46.2 -2.5 4 2725.00 35.1 AV 54.0 -18.9 3.47 H 144 37.6 -2.5 5 3633.00 45.1 PK 74.0 -28.9 3.74 H 123 45.6 -0.5 6 3633.00 38.0 AV 54.0 -16.0 3.74 H 123 38.5 -0.5 7 4542.00 46.8 PK 74.0 -27.2 3.64 H 124 44.7 2.1 8 4542.00 37.3 AV 54.0 -16.7 3.64 H 124 35.2 2.1 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 #1816.00 46.7 PK 74.0 -27.3 1.40 V 319 52.6 -5.9 2 #1816.00 36.3 AV 54.0 -17.7 1.40 V 319 42.2 -5.9 3 2752.00 45.9 PK 74.0 -28.1 3.52 V 4 48.3 -2.4 4 2752.00 40.6 AV 54.0 -13.4 3.52 V 4 43.0 -2.4 5 3633.00 43.2 PK 74.0 -30.8 1.40 V 12 43.7 -0.5 6 3633.00 33.0 AV 54.0 -21.0 1.40 V 12 33.5 -0.5 7 4542.00 46.3 PK 74.0 -27.7 1.86 V 38 44.2 2.1 8 4542.00 34.8 AV 54.0 -19.2 1.86 V 38 32.7 2.1 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value Report No.: RF171006C01-5 Page No. 16 / 25 Report Format Version: 6.1.1

CHANNEL TX Channel 3 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 #1832.00 45.4 PK 74.0 -28.6 1.15 H 112 51.3 -5.9 2 #1832.00 32.8 AV 54.0 -21.2 1.15 H 112 38.7 -5.9 3 2748.00 42.4 PK 74.0 -31.6 2.80 H 128 44.8 -2.4 4 2748.00 33.1 AV 54.0 -20.9 2.80 H 128 35.5 -2.4 5 3664.00 42.8 PK 74.0 -31.2 2.77 H 278 43.2 -0.4 6 3664.00 32.8 AV 54.0 -21.2 2.77 H 278 33.2 -0.4 7 4580.00 46.3 PK 74.0 -27.7 1.33 H 277 44.0 2.3 8 4580.00 36.0 AV 54.0 -18.0 1.33 H 277 33.7 2.3 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 #1832.00 42.8 PK 74.0 -31.2 1.57 V 205 48.7 -5.9 2 #1832.00 27.5 AV 54.0 -26.5 1.57 V 205 33.4 -5.9 3 2748.00 44.6 PK 74.0 -29.4 3.28 V 30 47.0 -2.4 4 2748.00 37.0 AV 54.0 -17.0 3.28 V 30 39.4 -2.4 5 3664.00 42.7 PK 74.0 -31.3 2.50 V 50 43.1 -0.4 6 3664.00 30.4 AV 54.0 -23.6 2.50 V 50 30.8 -0.4 7 4580.00 46.2 PK 74.0 -27.8 1.95 V 100 43.9 2.3 8 4580.00 34.8 AV 54.0 -19.2 1.95 V 100 32.5 2.3 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value Report No.: RF171006C01-5 Page No. 17 / 25 Report Format Version: 6.1.1

Below 1GHz worst-case data DETECTOR CHANNEL TX Channel 1 Quasi-Peak (QP) FUNCTION FREQUENCY RANGE 30MHz ~ 1GHz ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 32.81 23.6 QP 40.0 -16.4 1.00 H 15 38.8 -15.2 2 64.83 23.6 QP 40.0 -16.4 1.00 H 62 38.3 -14.7 3 98.78 27.4 QP 43.5 -16.1 1.00 H 142 45.6 -18.2 4 259.84 35.0 QP 46.0 -11.0 1.00 H 108 48.7 -13.7 5 409.25 27.2 QP 46.0 -18.8 1.00 H 229 38.2 -11.0 6 956.44 32.2 QP 46.0 -13.8 1.00 H 150 34.0 -1.8 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 65.80 29.6 QP 40.0 -10.4 1.00 V 123 44.7 -15.1 2 105.58 26.7 QP 43.5 -16.8 1.00 V 50 44.0 -17.3 3 255.96 33.8 QP 46.0 -12.2 1.00 V 50 47.7 -13.9 4 483.95 29.1 QP 46.0 -16.9 1.00 V 104 38.7 -9.6 5 896.29 33.9 QP 46.0 -12.1 1.00 V 76 37.0 -3.1 6 956.44 36.3 QP 46.0 -9.7 1.00 V 109 38.1 -1.8 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value Report No.: RF171006C01-5 Page No. 18 / 25 Report Format Version: 6.1.1

DETECTOR CHANNEL TX Channel 3 Quasi-Peak (QP) FUNCTION FREQUENCY RANGE 30MHz ~ 1GHz ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 32.81 24.2 QP 40.0 -15.8 1.00 H 227 39.4 -15.2 2 59.01 24.8 QP 40.0 -15.2 1.00 H 73 38.8 -14.0 3 240.43 34.9 QP 46.0 -11.1 1.00 H 115 49.5 -14.6 4 409.25 26.6 QP 46.0 -19.4 1.00 H 239 37.6 -11.0 5 483.95 22.9 QP 46.0 -23.1 1.00 H 154 32.5 -9.6 6 721.65 27.6 QP 46.0 -18.4 1.00 H 214 33.3 -5.7 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 64.83 31.9 QP 40.0 -8.1 1.00 V 87 46.6 -14.7 2 104.61 26.0 QP 43.5 -17.5 1.00 V 101 43.4 -17.4 3 248.19 35.5 QP 46.0 -10.5 1.00 V 43 49.8 -14.3 4 483.95 28.6 QP 46.0 -17.4 1.00 V 103 38.2 -9.6 5 711.95 30.2 QP 46.0 -15.8 1.00 V 294 36.1 -5.9 6 885.62 32.5 QP 46.0 -13.5 1.00 V 114 35.8 -3.3 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value Report No.: RF171006C01-5 Page No. 19 / 25 Report Format Version: 6.1.1

4.2 Conducted Emission Measurement 4.2.1 Limits of Conducted Emission Measurement Conducted Limit (dBuV) Frequency (MHz) Quasi-peak Average 0.15 - 0.5 66 - 56 56 - 46 0.50 - 5.0 56 46 5.0 - 30.0 60 50 Note: 1. The lower limit shall apply at the transition frequencies. 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50MHz. 4.2.2 Test Instruments Test Date: Nov. 03, 2017 Description & Manufacturer Model No. Serial No. Cal. Date Cal. Due Test Receiver ESCI 100613 Nov. 21, 2016 Nov. 20, 2017 ROHDE & SCHWARZ RF signal cable (with 10dB PAD) 5D-FB Cable-cond1-01 Sep. 05, 2017 Sep. 04, 2018 Woken LISN ROHDE & SCHWARZ ESH3-Z5 835239/001 Mar. 10, 2017 Mar. 09, 2018 (EUT) LISN ROHDE & SCHWARZ ESH3-Z5 100311 Aug. 15, 2017 Aug. 14, 2018 (Peripheral) Software BV ADT_Cond_ NA NA NA ADT V7.3.7.3 Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in HwaYa Shielded Room 1. 3. The VCCI Site Registration No. is C-2040. Report No.: RF171006C01-5 Page No. 20 / 25 Report Format Version: 6.1.1

4.2.3 Test Procedures a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The frequency range from 150kHz to 30MHz was searched. Emission levels under (Limit - 20dB) was not recorded. NOTE: The resolution bandwidth and video bandwidth of test receiver is 9kHz for quasi-peak detection (QP) and average detection (AV) at frequency 0.15MHz-30MHz. 4.2.4 Deviation from Test Standard No deviation. 4.2.5 Test Setup Vertical Ground Reference Plane Test Receiver EUT 40cm 80cm LISN Horizontal Ground Reference Plane Note: 1.Support units were connected to second LISN. For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.2.6 EUT Operating Conditions Same as 4.1.6. Report No.: RF171006C01-5 Page No. 21 / 25 Report Format Version: 6.1.1

4.2.7 Test Results Quasi-Peak (QP) / Phase Line (L) Detector Function Average (AV) Channel Channel 1 Corr. Reading Value Emission Level Limit Margin Freq. No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.18519 10.45 30.70 16.49 41.15 26.94 64.25 54.25 -23.10 -27.31 2 0.33768 10.50 30.32 19.98 40.82 30.48 59.26 49.26 -18.44 -18.78 3 1.26435 10.49 16.02 10.98 26.51 21.47 56.00 46.00 -29.49 -24.53 4 4.78335 10.68 12.82 3.42 23.50 14.10 56.00 46.00 -32.50 -31.90 5 11.23876 10.99 8.76 0.67 19.75 11.66 60.00 50.00 -40.25 -38.34 6 19.20734 11.38 9.50 0.89 20.88 12.27 60.00 50.00 -39.12 -37.73 REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level - Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value. Report No.: RF171006C01-5 Page No. 22 / 25 Report Format Version: 6.1.1

Quasi-Peak (QP) / Phase Neutral (N) Detector Function Average (AV) Channel Channel 1 Corr. Reading Value Emission Level Limit Margin Freq. No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.16173 10.21 34.19 17.67 44.40 27.88 65.37 55.37 -20.97 -27.49 2 0.19978 10.22 28.39 12.15 38.61 22.37 63.62 53.62 -25.01 -31.25 3 0.34560 10.23 33.76 24.46 43.99 34.69 59.07 49.07 -15.08 -14.38 4 1.80784 10.30 13.83 6.79 24.13 17.09 56.00 46.00 -31.87 -28.91 5 4.77944 10.44 12.60 2.22 23.04 12.66 56.00 46.00 -32.96 -33.34 6 12.23581 10.76 10.12 -0.96 20.88 9.80 60.00 50.00 -39.12 -40.20 REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level - Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value. Report No.: RF171006C01-5 Page No. 23 / 25 Report Format Version: 6.1.1

5 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: RF171006C01-5 Page No. 24 / 25 Report Format Version: 6.1.1

Appendix – Information on the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab Hsin Chu EMC/RF/Telecom Lab Tel: 886-2-26052180 Tel: 886-3-6668565 Fax: 886-2-26051924 Fax: 886-3-6668323 Hwa Ya EMC/RF/Safety Lab Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. --- END --- Report No.: RF171006C01-5 Page No. 25 / 25 Report Format Version: 6.1.1


Document Created: 2017-12-11 16:20:17
Document Modified: 2017-12-11 16:20:17
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC