SiXPanic EXHIBIT 7-1 Install Guide

FCC ID: CFS8DL6PNC

Users Manual

Download: PDF
FCCID_3852347

SiXPANIC 2-Button Wireless Panic Key Quick Installation Guide Guide d'installation rapide Guía Rápida de Instalación Guia rápido de instalação This bi-directional wireless key (key fob) is Cette télécommande bidirectionnelle sans fil est Este llavero electrónico (llave inalámbrica) Este chaveiro sem fio bidirecional (chave sem fio) intended for use with Honeywell controls that conçue pour être utilisée avec les panneaux de bidireccional, ha sido diseñado para usar con los deve ser usado com controles Honeywell support SiX™ series devices. commande Honeywell qui supportent les dispositifs controles Honeywell compatibles con los compatíveis com dispositivos da série SiX™. MC de la série SIX . dispositivos de la serie SiX™. To activate, press and hold both buttons briefly To activate, press and hold both buttons briefly until the LED flashes. To clear the alarm at the To activate, press and hold both buttons briefly To activate, press and hold both buttons briefly until the LED flashes. To clear the alarm at the control, enter a user code. To clear memory of until the LED flashes. To clear the alarm at the until the LED flashes. To clear the alarm at the control, enter a user code. To clear memory of alarm, select Disarm and enter a user code. control, enter a user code. To clear memory of control, enter a user code. To clear memory of alarm, select Disarm and enter a user code. LED Indications alarm, select Disarm and enter a user code. alarm, select Disarm and enter a user code. LED Indications Green flashing: lights when unit is transmitting LED Indications LED Indications Green flashing: lights when unit is transmitting Red Flashing: indicates low battery (lights Green flashing: lights when unit is transmitting Green flashing: lights when unit is transmitting Red Flashing: indicates low battery (lights during key press) Red Flashing: indicates low battery (lights Red Flashing: indicates low battery (lights during key press) during key press) during key press) Enrollment Enrôlement Enrolar Registrar MC For the Lyric™ Controller Pour le contrôleur Lyric Para el Controlador Lyric™ Para o Controlador Lyric™ Follow instructions in Controller’s manual. Follow instructions in Controller’s manual. Follow instructions in Controller’s manual. Follow instructions in Controller’s manual. 1. Set the Lyric Controller in Programming Mode: 1. Set the Lyric Controller in Programming Mode: 1. Set the Lyric Controller in Programming Mode: 1. Set the Lyric Controller in Programming Mode: Security > Tools > [installer code] > Program > Security > Tools > [installer code] > Program > Security > Tools > [installer code] > Program > Security > Tools > [installer code] > Program > (scroll down) > SiX Programming. (scroll down) > SiX Programming. (scroll down) > SiX Programming. (scroll down) > SiX Programming. 2. Press and hold both buttons briefly until the LED 2. Press and hold both buttons briefly until the LED 2. Press and hold both buttons briefly until the LED 2. Press and hold both buttons briefly until the LED flashes green to activate the enrollment process flashes green to activate the enrollment process flashes green to activate the enrollment process flashes green to activate the enrollment process (enrollment can take up to about 20 seconds). (enrollment can take up to about 20 seconds). (enrollment can take up to about 20 seconds). (enrollment can take up to about 20 seconds). 3. When done, the MAC ID is displayed and the LED 3. When done, the MAC ID is displayed and the LED 3. When done, the MAC ID is displayed and the LED 3. When done, the MAC ID is displayed and the lights solid green for 3 seconds to confirm lights solid green for 3 seconds to confirm lights solid green for 3 seconds to confirm LED lights solid green for 3 seconds to confirm enrollment. enrollment. enrollment. enrollment. If enrollment is not confirmed, press and hold both If enrollment is not confirmed, press and hold both If enrollment is not confirmed, press and hold both If enrollment is not confirmed, press and hold buttons briefly again to restart enrollment. buttons briefly again to restart enrollment. buttons briefly again to restart enrollment. both buttons briefly again to restart enrollment. 4. Press Edit to set the Alarm Report option on/off. 4. Press Edit to set the Alarm Report option on/off. 4. Press Edit to set the Alarm Report option on/off. 4. Press Edit to set the Alarm Report option on/off. Press Save. Enter an appropriate Zone Descriptor. Press Save. Enter an appropriate Zone Descriptor. Press Save. Enter an appropriate Zone Descriptor. Press Save. Enter an appropriate Zone Press Save. Press Save. Press Save. Descriptor. Press Save. For the Lyric™ Gateway For the Lyric™ Gateway For the Lyric™ Gateway For the Lyric™ Gateway Enroll and program using AlarmNet 360™. Enroll and program using AlarmNet 360™. Enroll and program using AlarmNet 360™. Enroll and program using AlarmNet 360™. For other Controls For other Controls For other Controls For other Controls For other Controls that support SiX Series devices, For other Controls that support SiX Series devices, For other Controls that support SiX Series devices, For other Controls that support SiX Series devices, see the controller’s instructions for enrollment details. see the controller’s instructions for enrollment details. see the controller’s instructions for enrollment details. see the controller’s instructions for enrollment Après l'enrôlement, vérifiez la puissance du signal Una vez registrado, verifique la intensidad de señal Após o registro, verifique a intensidade do sinal details. adéquate en effectuant des tests Go / No Go (voir les adecuada realizando pruebas Go / No Go (ver las adequado ao realizar testes Go / No Go (consulte as instructions du panneau de commande) avec le instrucciones del controlador) con el dispositivo en la instruções do controlador) com o dispositivo na After enrolling, verify adequate signal strength by dispositif dans son emplacement de montage prévu. localização de montagem pretendida. Ajuste, se conducting Go/No Go tests (see the controller’s ubicación deseada. Ajuste la ubicación y orientación Au besoin, modifiez l'emplacement ou l'orientation du del dispositivo según sea necesario. necessário, o posicionamento e a orientação do instructions) with the device in its intended mounting dispositif. dispositivo. location. Adjust the device location and orientation as Una vez registrado, el dispositivo no se puede usar con Une fois enrôlé, le dispositif ne peut pas être utilisé otro sistema hasta que sea removido del controlador Uma vez registrado, o dispositivo não pode ser usado necessary. avec un autre système avant d'avoir été supprimé du actual. Ver las instrucciones del controlador. com outro sistema até que seja removido do controlador IMPORTANT: Once enrolled, the device cannot be panneau actuel. Reportez-vous aux instructions du atual. Consulte as instruções do controlador. used with another system until it is removed from the panneau. NOTA : Puede utilizar la pantalla de localización de current controller. See the controller’s instructions. sensores para confirmar la ubicación del dispositivo. NOTA: Você pode usar o recurso Sensor Location para NOTE: You can use the Sensor Location feature to NOTE : Vous pouvez utiliser la fonction d'emplacement En el modo de programación, seleccione una zona y confirmar a localização do dispositivo. No modo de confirm device location. In programming mode, select a du détecteur pour confirmer l'emplacement du el respectivo LED de sensor se encenderá. programação, selecione uma zona e a luz LED do zone and the respective sensor LED lights. détecteur. En mode programmation, sélectionnez une respectivo sensor acenderá. zone et le voyant du capteur respectif s'allume.

IMPORTANT SECURITY NOTICE AVISO IMPORTANTE DE SEGURIDAD Please inform the User about the security importance of their Informar al usuario sobre la importancia de la seguridad de su llave wireless key (key fob), and what to do if it is lost. inalámbrica (llavero electrónico) y qué debe hacer si la pierde. Explain that the key fob is similar to their keys or access card. If lost Explicar que el llavero electrónico es similar a sus llaves o tarjeta de or stolen, another person can compromise their security system. acceso. Si se pierde o se lo roban, otra persona puede comprometer They should immediately notify the Dealer/Installer of a lost or stolen su sistema de seguridad. Debe notificar de inmediato al distribuidor o key fob. The Dealer/Installer will then remove the key fob instalador que se le ha perdido, o le han robado, un llavero programming from the security system. electrónico. El distribuidor o instalador entonces eliminará la programación del llavero electrónico del sistema de seguridad. AVIS DE SÉCURITÉ IMPORTANT Veuillez aviser l'utilisateur à propos de l'importance de sa clé sans fil VISO DE SEGURANÇA IMPORTANTE (télécommande) et quoi faire en cas de perte. Informe o usuário sobre a importância da segurança do chaveiro Expliquez-lui que sa télécommande a la même valeur que ses clés sem fio e o que fazer em caso de perda. ou sa carte d’accès. Si la télécommande est perdue ou volée, une Explique que o chaveiro é semelhante a suas chaves ou cartões de autre personne peut neutraliser le fonctionnement du système de [show wristband, belt clip, and necklace] acesso. Se for perdido ou roubado, outra pessoa pode comprometer sécurité. Il doit donc immédiatement avertir son détaillant ou son seu sistema de segurança. Ele deve notificar imediatamente o installateur. Le détaillant/l’installateur pourra ensuite rendre distribuidor/instalador em caso de perda ou roubo. O inopérante la télécommande dans le système de sécurité. distribuidor/instalador removerá a programação do chaveiro do sistema de segurança. BATTERY CAUTION: Risk of fire, explosion and burns. Do not recharge, Battery Replacement / Remplacement des piles / Precauciones con respecto a las baterías: Riesgo de FUEGO, disassemble, heat above 212° F (100° C) or incinerate. Dispose of used explosión y quemaduras. No recargar, desarmar, calentar por encima Cambiar batería / Substituir bateria batteries properly. Keep away from children. de 100°C (212°F), o incinerar. Descarte Apropiadamente las baterias NOTE: Constant exposure to high or low temperature or high humidity may reduce usadas. Manténgalas fuera del alcance de los niños. battery life. NOTA: Exposición constante a altas o bajas temperaturas o alta humedad puede reducir la vida útil de la batería. Attention de batterie: Risque d'incendie, d'explosion et de brûlures. Ne rechargez pas, démonter, chauffer au-dessus de 212° F (100°C), ou Precauções com a bateria: Risco de incêndio, explosão e incinérer. Débarrassez-vous des batteries utilisées de façon appropriée. queimaduras. Não recarregar, não desmontar, não aquecer mais de Gardez à partir des enfants. 100 °C (212 ºF) nem incinerar. Descarte as baterias usadas NOTE : Une exposition constante à des températures élevées ou basses ou à un taux apropriadamente. Mantenha fora do alcance de crianças. d'humidité élevée peut réduire la durée de vie de la pile. NOTA: A exposição constante a temperatura alta ou baixa ou alta umidade podem reduzir a vida útil da batería Specifications / Spécifications / Especificaciones / Especificações: Approval Listings / Approbations Homologations Product must be tested at least once Battery / Pile / Batería / Bateria: /Listas de aprobaciones / Listagens de aprovação: each year. 1 x 3V Coin Cell, Honeywell BL3-0004 (CR2450); Duracell DL2450; Panasonic CR2450; Energizer CR2450 FCC / IC Le fonctionnement du produit doit RF Frequency / Fréquence RF / Frecuencia de RF / Frequência RF: 2.4GHz ETL Listed to Home Health Care Household Fire & Burglar être vérifié au moins une fois par Control Unit Accessory Operating Temperature / Température de fonctionnement / Temperatura de funcionamiento / cETL Listed to Household Burglary Warning System Control année . Temperatura de operação: 32° – 122° F / 0° – 50° C (Agency Compliance 32° – 120° F / 0° – 49° C) Unit Accessory; Also Listed For Use As A Signal Appliance, El producto debe ser probado al Relative Humidity / Humidité relative / Humedad relativa / Umidade relativa: Miscellaneous Certified For Canada menos una vez al año. 95% max. (Agency Compliance - 93% max.), non-condensing Other Standards: SIA CP-01 RoHS O produto deve ser testado pelo Dimensions / Dimensions / Dimensiones / Dimensões: 0.5” H x 1.5” L x 1.5” W / 13 mm H x 38 mm L x 38 mm W IMPORTANT! This wireless key is intended as a menos uma vez por ano. convenience to the user and should not be considered as a life safety device. FEDERAL COMMUNICATIONS COMMISSION & INDUSTRY CANADA STATEMENTS The user shall not make any changes or modifications to the equipment RF EXPOSURE / MISE EN GARDE EXPOSITION AUX FREQUENCES RADIO DECLARACIÓN IFETEL unless authorized by the Installation Instructions or User's Manual. Unauthorized changes or RF EXPOSURE Warning – The antenna(s) used for this transmitter must not be co- La operación de este equipo está sujeta a las siguientes dos condiciones modifications could void the user's authority to operate the equipment. located or operated in conjunction with any other transmitter except in accordance 1. Es posible que este equipo o dispositivo no cause interferencia perjudicial y with FCC and ISED multi-transmitter product procedures. 2. Este equipo debe aceptar cualquier interferencia, incluyendo la que pueda causar FCC / IC STATEMENT This device complies with Part 15 of the FCC Rules, and Industry su operación no deseada. Canada’s license-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference Mise en Garde Exposition aux Fréquences Radio: La/les antenne(s) utilisée(s) pour received, including interference that may cause undesired operation. cet émetteur ne pas être située(s) ni fonctionner parallèlement à tout autre DECLARAÇÃO ANATEL Cet appareil est conforme à la partie 15 des règles de la FCC et exempt de licence RSS transmetteur ou antenne, excepté en conformité avec les procédures de produit multi Este equipamento não tem direito à proteção contra interferência prejudicial e não d’Industrie Canada. Son fonctionnement est soumis aux conditions suivantes: (1) Cet transmetteur FCC et ISED. pode causar interferência em sistemas devidamente autorizados. Para maiores appareil ne doit pas causer d’interférences nuisibles. (2) Cet appareil doit accepter toute interférence reçue y compris les interférences causant une reception indésirable. informações, consulte o site da ANATEL www.anatel.gov.br REFER TO THE INSTALLATION INSTRUCTIONS FOR THE CONTROL WITH WHICH THIS DEVICE IS USED, FOR DETAILS REGARDING LIMITATIONS OF THE ENTIRE ALARM SYSTEM. POUR LES LIMITES DU SYSTÈME D’ALARME AU COMPLET, REPORTEZ-VOUS AU GUIDE D’INSTALLATION DU PANNEAU DE COMMANDE. CONSULTE LAS INSTRUCCIONES DE INSTALACIÓN PARA EL CONTROL CON EL CUAL SE UTILIZA ESTE DISPOSITIVO, PARA OBTENER DETALLES CON RESPECTO A LAS LIMITACIONES DE TODO EL SISTEMA DE ALARMA. PARA SABER MAIS SOBRE AS LIMITAÇÕES DE TODO O SISTEMA DE ALARME, CONSULTE AS INSTRUÇÕES DE INSTALAÇÃO DO CONTROLE COM O QUAL ESTE DISPOSITIVO É USADO. Support / Soutien / Soporte / Suporte U.S. warranty / U.S. garantie / U.S. garantie / U.S. garantia Patents / Brevets / Patentes / Patentes https://mywebtech.honeywell.com/ www.honeywell.com/security/hsc/resources/wa www.honeywell.com/patents  2018 Honeywell International Inc. Honeywell and is a registered trademark of Honeywell International Inc. All other trademarks are the properties of their respective owners. All rights reserved. www.honeywell.com/security 2 Corporate Center Drive, Suite 100 Ê800-15960GŠ P.O. Box 9040, Melville, NY 11747 800-24165 4/18 Rev A


Document Created: 2018-05-11 09:13:24
Document Modified: 2018-05-11 09:13:24
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC